SkillAgentSearch skills...

apple-design

Apple's approach to interface design and fluid, physical motion, translated for the web

Install / Use

npx skills add emilkowalski/skills --skill apple-design

Installs into whichever agent you are using.

About this skill
📄

SKILL.md

Installable skill definition

Quality Score

97/100

Supported Platforms

Universal

Our assessment of apple-design

apple-design scores 97/100 on our quality scale, 151st of 4,698 Development & Engineering skills we index (top 4%).

Its SKILL.md is 22 KB long, well organised into 21 sections with 9 code examples: a thorough specification that gives an agent plenty to work with.

With 40,844 GitHub stars, it is one of the more widely adopted skills in the catalogue.

Substance
30/30
Structure
20/20
Description
12/15
Adoption
20/20
Freshness
15/15

Maintenance, license and trust

  • The repository was last updated about 2 months ago, so apple-design is actively maintained.
  • Our last check on 2026-11-14 found the source still online.
  • It is released under the MIT license, a permissive license that allows use, modification and commercial use with attribution.
  • Its trust signals score 100/100, with no cautions. These come from repository metadata, not a code audit — read the skill file before letting an agent act on it.

Safety scan

No issues found

Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands. An AI review of the same text found nothing harmful.

AI review by kimi-k2.7-code on 2026-09-26. Automated pattern scan on 2026-09-26. It catches known dangerous patterns, not every risk — read a skill before letting an agent act on it.

apple-design compared with similar skills

All 4 of these similar skills score higher than apple-design; compare them before choosing.

SkillScoreStarsUpdatedFormat
apple-design (this skill)by emilkowalski9740.8k54d agoSKILL.md
taste-skillby Leonxlnx100116.8k8d agoCLAUDE.md
ai-job-searchby ai-job-search-dev10072.1ktodayCLAUDE.md
claude-howtoby luongnv8910047.3k2d agoCLAUDE.md
Claude-Code-Game-Studiosby Donchitos10039.7k7d agoCLAUDE.md

Frequently asked questions

How do I install apple-design?
Run npx skills add emilkowalski/skills --skill apple-design. The install tabs above show the steps for each supported agent.
Which AI agents does apple-design work with?
It is written for Universal, as a SKILL.md file. Other agents that read the same format can often use it too.
Is apple-design safe to use?
Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands. An AI review of the same text found nothing harmful. It is MIT-licensed and scores 100/100 on trust signals. Skills are instructions an agent will follow, so read the file before installing it and do not approve commands you do not understand.
Is apple-design still maintained?
The repository was last updated about 2 months ago, so apple-design is actively maintained.

name: apple-design description: Apple's approach to interface design and fluid, physical motion, translated for the web. Use when building or reviewing gesture-driven UI, spring animations, drag/swipe/sheet interactions, momentum and interruptible transitions, translucent materials and depth, typography (optical sizing, tracking, leading), reduced-motion, or the design foundations (feedback, spatial consistency, restraint) behind Apple-style interfaces.

Apple Design

Initial Response

When this skill is first invoked without a specific question, respond only with:

I'm ready to help you build fluid, Apple-style interfaces on the web, my knowledge comes from Apple's WWDC design talks, translated for the web.

Do not provide any other information until the user asks a question.

How Apple builds interfaces that stop feeling like a computer and start feeling like an extension of you. This knowledge comes from Apple's WWDC design talks — chiefly Designing Fluid Interfaces (WWDC 2018) — distilled and translated into the web platform (CSS, Pointer Events, requestAnimationFrame, spring libraries like Motion/Framer Motion).

The through-line: an interface feels alive when motion starts from the current on-screen value, inherits the user's velocity, projects momentum forward, and can be grabbed and reversed at any instant. Springs are the tool that makes all of this natural, because they are inherently interruptible and velocity-aware.

The Core Idea

"When we align the interface to the way we think and move, something magical happens — it stops feeling like a computer and starts feeling like a seamless extension of us."

An interface is fluid when it behaves like the physical world: things respond instantly, move continuously, carry momentum, resist at boundaries, and can be redirected mid-motion. Everything below is a way to get closer to that.

Apple frames design as serving four human needs: safety/predictability, understanding, achievement, and joy. Every rule here serves one of them.

1. Response — kill latency

The moment lag appears, the feeling of directness "falls off a cliff." Response is the foundation everything else is built on.

  • Respond on pointer-down, not on release. Highlight a button the instant it's pressed. Waiting for click/touch-up to show feedback feels dead.
  • Be vigilant about every latency. Audit debounces, artificial timers, transition waits, and the ~300ms tap delay. Anything on the input path that isn't essential is a regression.
  • Feedback must be continuous during the interaction, not just at the end. For a drag, slider, or drawer, update the UI 1:1 with the pointer the whole way through — never animate only when the gesture completes.
/* Feedback lives on the press, and it's instant */
.button:active {
  transform: scale(0.97);
  transition: transform 100ms ease-out;
}

2. Direct manipulation — 1:1 tracking

"Touch and content should move together."

When the user drags something, it must stay glued to the finger — and respect the offset from where they grabbed it. Snapping to the element's center on grab breaks the illusion immediately.

  • Use Pointer Events with setPointerCapture so tracking continues even when the pointer leaves the element's bounds.
  • Track a short velocity/position history (last few pointermove events), not just the current point — you'll need velocity at release.
el.addEventListener('pointerdown', (e) => {
  el.setPointerCapture(e.pointerId);
  const grabOffset = e.clientY - el.getBoundingClientRect().top; // respect where they grabbed
  // ...track position + timestamp history for velocity
});

3. Interruptibility — the single most important principle

"The thought and the gesture happen in parallel."

Every animation must be interruptible and redirectable at any moment. A user must be able to grab a moving element mid-flight and reverse it without waiting for the animation to finish. A closing modal the user grabs again should follow the finger — not finish closing first, then reopen.

  • Never lock out input during a transition.
  • Always animate from the presentation (current) value, never the target value. On interrupt, read the element's live on-screen transform and start the new animation from there. Starting from the logical/target value causes a visible jump.
  • Avoid CSS transitions and @keyframes for anything gesture-driven — they can't be smoothly grabbed and reversed mid-flight. Springs animate from the current value by default, which is exactly what interruption needs.
  • When a gesture reverses, blend velocity — don't hard-cut it. Replacing one animation with another at a reversal creates a velocity discontinuity, a "brick wall." Spring libraries that carry velocity through a re-target avoid it. (This is what iOS's additive animations do natively; on the web, choose a spring library that re-targets from the current velocity.)
  • Decompose 2D motion into independent X and Y springs. A single spring on a 2D distance desyncs when X and Y have different velocities.

4. Behavior over animation — use springs

"Think of animation as a conversation between you and the object, not something prescribed by the interface."

A pre-scripted, fixed-duration animation can't respond to new input. A spring can — new input just changes the target, and the motion stays continuous. Reach for springs for anything a user can touch.

Apple deliberately replaced the physics triplet (mass/stiffness/damping) with two designer-friendly parameters. Think in these:

  • Damping ratio — controls overshoot. 1.0 = critically damped, no bounce, smooth settle. < 1.0 = overshoots and oscillates. Lower = bouncier.
  • Response — how quickly the value reaches the target, in seconds. Lower = snappier. This is not "duration" — a spring has no fixed duration; its settle time emerges from the parameters.

Defaults:

  • Start most UI at damping 1.0 (critically damped) — graceful and non-distracting.
  • Add bounce (damping ~0.8) only when the gesture itself carried momentum (a flick, a throw, a drag release). Overshoot on a menu that just faded in feels wrong; overshoot on a card you flicked feels right.

Concrete values Apple ships:

| Interaction | Damping | Response | | --- | --- | --- | | Move / reposition (e.g. PiP) | 1.0 | 0.4 | | Rotation | 0.8 | 0.4 | | Drawer / sheet | 0.8 | 0.3 |

Web mapping (Motion / Framer Motion): the bounce + duration spring API maps closely to Apple's damping + response. A safe house style is damping: 1.0 springs everywhere by default; reserve bounce for momentum-driven, physical interactions.

import { animate } from 'motion';

// Critically damped default (no overshoot)
animate(el, { y: 0 }, { type: 'spring', bounce: 0, duration: 0.4 });

// Momentum interaction — a little bounce, only because a flick preceded it
animate(el, { y: target }, { type: 'spring', bounce: 0.2, duration: 0.4 });

5. Velocity handoff — the seam between drag and animation

When a gesture ends, the animation must continue at the finger's exact velocity, so there's no visible seam between dragging and animating. This is the detail that most separates "fluid" from "fine."

Pass the pointer's release velocity as the spring's initial velocity. Some spring APIs want relative velocity — normalize it by the remaining distance to the target:

relativeVelocity = gestureVelocity / (targetValue − currentValue)

Example: element at y=50, target y=150 (100px to go), finger moving 50px/s → initial spring velocity = 50 / 100 = 0.5. Framer Motion / Motion take absolute px/s velocity directly (velocity option), so you usually hand it the raw value.

6. Momentum projection — animate to where the gesture is going

"Take a small input and make a big output."

Don't snap to the nearest boundary from the release point. Use velocity to project the resting position — exactly like scroll deceleration — then snap to the target nearest that projected point. This is what makes a flick feel like it throws the element.

Apple's exact projection function (from the Designing Fluid Interfaces sample code):

// decelerationRate ≈ 0.998 for normal scroll feel; 0.99 for snappier
function project(initialVelocity /* px/s */, decelerationRate = 0.998) {
  return (initialVelocity / 1000) * decelerationRate / (1 - decelerationRate);
}

const projectedEndpoint = currentPosition + project(releaseVelocity);
const target = nearestSnapPoint(projectedEndpoint);   // choose target from the projection
animateSpringTo(target, { velocity: releaseVelocity }); // then hand off velocity (§5)

Note: the physics-textbook v²/(2·decel) is not what Apple ships — use the exponential-decay form above. This is the standard behavior in good bottom-sheets and carousels (Vaul, Embla).

7. Spatial consistency — symmetric paths, anchored origins

"If something disappears one way, we expect it to emerge from where it came."

  • Enter and exit along the same path. A panel that slides in from the right must dismiss to the right. In-from-right / out-the-bottom feels disconnected and confusing.
  • Anchor interactions to their source. A menu, popover, or sheet should originate from the element that triggered it — set transform-origin to the trigger, so the spatial relationship between button and content is obvious. (This is the same origin-awareness point as popovers scaling from their trigger, not their center.)
  • Mirror the easing on reversible transitions so the outbound path matches the return path (use inverse cubic-bézier control points for the two directions).

8. Hint in the direction of the gesture

Humans predict a final state from a trajectory. Intermediate motion should telegraph where things are going — Control Center modules "grow up and out toward your finger." Make the in-between frames point at the outcome, not just interpolate blindly to it.

9. Rubber-banding — soft boundaries

At an edge, resist progressively instead of stopping hard. A hard stop reads as "frozen"; continuous resistance reads as "responsive, but there's nothing more here." Apply damping that increases the further past the boundary the user drags.

// The further past the bound, the less the element follows — real things slow before they stop
function rubberband(overshoot, dimension, constant = 0.55) {
  return (overshoot * dimension * constant) / (dimension + constant * Math.abs(overshoot));
}

10. Gesture design details (the "feel" checklist)

  • Tap: highlight on touch-down (instant), commit on touch-up. Add ~10px of hysteresis/hit padding around the target, and allow cancel-by-dragging-away and back.
  • Drag/swipe: require a small movement threshold (hysteresis, ~10px) before committing to a direction, then track 1:1.
  • Detect all plausible gestures in parallel from the first move, then confidently cancel the losers once intent is clear. Avoid recognizers that only report a final state (swipeleft-type events) — they throw away the continuous tracking you need for feedback.
  • Minimize disambiguation delays. Double-tap detection unavoidably delays single taps; only pay that cost where double-tap truly exists.

11. Frame-level smoothness

Smoothness is about what's in the frames, not just the frame rate.

  • Keep the per-frame positional change below the perception threshold to avoid strobing.
  • For very fast motion, a subtle motion blur / stretch encodes speed and reads better than a hard sharp streak.
  • requestAnimationFrame is the web's display-synced clock (Apple uses CADisplayLink). Animate only compositor-friendly properties — transform and opacity — and hint with will-change where motion is imminent.

12. Materials & depth — translucency conveys hierarchy

Apple uses translucent materials as a floating func

Truncated for display — read the full file on GitHub.

Related Skills

View on GitHub
GitHub Stars40.8k
CategoryDevelopment
Updated1mo ago
Forks2.3k

Languages

Markdown

Trust signals

100/100

From repository metadata: license, adoption, age and documentation. Not a code audit — see the Safety scan above for what the skill file itself contains.

No cautions