24 skills found
zszszszsz / .config# # Automatically generated file; DO NOT EDIT. # OpenWrt Configuration # CONFIG_MODULES=y CONFIG_HAVE_DOT_CONFIG=y # CONFIG_TARGET_sunxi is not set # CONFIG_TARGET_apm821xx is not set # CONFIG_TARGET_ath25 is not set CONFIG_TARGET_ar71xx=y # CONFIG_TARGET_ath79 is not set # CONFIG_TARGET_bcm27xx is not set # CONFIG_TARGET_bcm53xx is not set # CONFIG_TARGET_brcm47xx is not set # CONFIG_TARGET_brcm63xx is not set # CONFIG_TARGET_cns3xxx is not set # CONFIG_TARGET_octeon is not set # CONFIG_TARGET_gemini is not set # CONFIG_TARGET_mpc85xx is not set # CONFIG_TARGET_imx6 is not set # CONFIG_TARGET_mxs is not set # CONFIG_TARGET_ixp4xx is not set # CONFIG_TARGET_lantiq is not set # CONFIG_TARGET_malta is not set # CONFIG_TARGET_pistachio is not set # CONFIG_TARGET_mvebu is not set # CONFIG_TARGET_kirkwood is not set # CONFIG_TARGET_mediatek is not set # CONFIG_TARGET_ramips is not set # CONFIG_TARGET_at91 is not set # CONFIG_TARGET_rb532 is not set # CONFIG_TARGET_tegra is not set # CONFIG_TARGET_layerscape is not set # CONFIG_TARGET_octeontx is not set # CONFIG_TARGET_oxnas is not set # CONFIG_TARGET_armvirt is not set # CONFIG_TARGET_ipq40xx is not set # CONFIG_TARGET_ipq806x is not set # CONFIG_TARGET_ipq807x is not set # CONFIG_TARGET_samsung is not set # CONFIG_TARGET_arc770 is not set # CONFIG_TARGET_archs38 is not set # CONFIG_TARGET_ar7 is not set # CONFIG_TARGET_omap is not set # CONFIG_TARGET_uml is not set # CONFIG_TARGET_zynq is not set # CONFIG_TARGET_x86 is not set CONFIG_TARGET_ar71xx_generic=y # CONFIG_TARGET_ar71xx_tiny is not set # CONFIG_TARGET_ar71xx_nand is not set # CONFIG_TARGET_ar71xx_mikrotik is not set # CONFIG_TARGET_MULTI_PROFILE is not set # CONFIG_TARGET_ar71xx_generic_Default is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_carambola2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_lima is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALFAAP120C is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ap121f is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ap91-5g is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALFAAP96 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_HORNETUB is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_HORNETUBx2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALFANX is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_n5q is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_r36a is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_TUBE2H16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_TUBE2H8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_fritz4020 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_fritz300e is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_fritz450e is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_sc1750 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_sc300m is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_sc450 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_c-55 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALL0258N is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALL0305 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ALL0315N is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_antminer-s1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_antminer-s3 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_antrouter-r1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_arduino-yun is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP121_16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP121_8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP132 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP135 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP136_010 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP136_020 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP96 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DB120 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_PB42 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_PB44 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_BXU2000N2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZR450HP2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZR600DHP is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZRHPAG300H is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZRHPG300NH is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZRHPG300NH2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WZRHPG450H is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e316n-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e320n-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e355ac-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e355ac-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e375ac is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e380ac-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e380ac-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e385ac is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e520n is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cf-e530n is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WP543_16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WP543_8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WPE72_16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WPE72_8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wpj342 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wpj344 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wpj531 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wpj558 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wpj563 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dap-1330-a1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dap-2695-a1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DGL5500A1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DHP1565A1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DIR505A1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DIR825B1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DIR825C1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DIR835A1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dir-869-a1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dragino2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_el-m150 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_el-mini is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ew-balin is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ew-dorin is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ew-dorin-router is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_EAP300V2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ens202ext is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_EPG5000 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ESR1750 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ESR900 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-inet-6408A-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-inet-6416A-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-domino is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-ar150 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-ar300 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-ar300m is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-ar750 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-ar750s is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-mifi is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_gl-usb150 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_SGRW500N85BV2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_minibox-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_oolite-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_oolite-v5.2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_oolite-v5.2-dev is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_lan-turtle is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_packet-squirrel is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wifi-pineapple-nano is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_hiwifi-hc6361 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP147_010 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WRT160NL is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WRT400N is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mr12 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mr16 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mc-mac1200r is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mc-mw4530r is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_smart-300 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WNDAP360 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndr3700 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndr3700v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndr3800 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndr3800ch is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndrmac is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wndrmacv2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_WNR2200 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_koala is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_omy-g1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_omy-x1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_onion-omega is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_som9331 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_A60 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MR1750 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MR600 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MR900 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_OM2P is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_OM5PAC is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_OM5P is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe505n is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_r602n is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ts-d084 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_pqi-air-pen is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_k2t is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MZKW04NU is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MZKW300NH is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cap324 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cr3000 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cr5000 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_DLRTDEV01 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_qihoo-c301 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP143_16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP143_8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_AP152_16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e1700ac-v2-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e1700ac-v2-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e558-v2-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e558-v2-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e600g-v2-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e600g-v2-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e600gac-v2-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e600gac-v2-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e750a-v4-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e750a-v4-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e750g-v8-16M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_e750g-v8-8M is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ap531b0 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wam250 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_CAP4200AG is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_EAP7660D is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wlr8100 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_bsb is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c25-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c5-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c58-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c59-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c59-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c60-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c60-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c7-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c7-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c7-v2-il is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr7500-v3 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c7-v4 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_archer-c7-v5 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe210-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe210-220-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe510-520-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_eap120-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_re355-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_re450-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-mr6400-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr3227-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr3500-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr3600-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr4300-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr4300-v1-il is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr4310-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr4900-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr5800-v1 is not set CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr6500-v2=y # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr6500-v6 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wdr8500-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wpa8630-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr1043n-v5 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr1043nd-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr1043nd-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr1043nd-v3 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr1043nd-v4 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr2041n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr2041n-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr2543-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr710n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr710n-v2.1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr810n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr810n-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr842n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr842n-v2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr842n-v3 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr880n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr881n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr902ac-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr941n-v7 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tl-wr942n-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wbs210-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wbs510-v1 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_TEW673GRU is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_TEW732BR is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_TEW823DRU is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_tellstick-znet-lite is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_rut900 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-air-gateway is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-air-gateway-pro is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-airrouter is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-bullet-m is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-ls-sr71 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-lbe-m5 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-loco-m-xw is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-nano-m-xw is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-nano-m is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_rw2458n is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-rocket-m-ti is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-rocket-m-xw is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-rocket-m is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-rs is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-rspro is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-uap-pro is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifi is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifiac-lite is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifiac-mesh is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifiac-pro is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifi-outdoor is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubnt-unifi-outdoor-plus is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ubdev01 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_wrtnode2q is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dr342 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dr531 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_weio is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mynet-n600 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_mynet-n750 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_MYNETREXT is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ap90q is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe830 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_cpe870 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_sr3200 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_t830 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_xd3200 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ZCN1523H28 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_ZCN1523H516 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_NBG6616 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dLAN_Hotspot is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dLAN_pro_1200_ac is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_dLAN_pro_500_wp is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_rme-eg200 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_JA76PF is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_JA76PF2 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_JWAP003 is not set # CONFIG_TARGET_ar71xx_generic_DEVICE_jwap230 is not set CONFIG_HAS_SUBTARGETS=y CONFIG_HAS_DEVICES=y CONFIG_TARGET_BOARD="ar71xx" CONFIG_TARGET_SUBTARGET="generic" CONFIG_TARGET_PROFILE="DEVICE_tl-wdr6500-v2" CONFIG_TARGET_ARCH_PACKAGES="mips_24kc" CONFIG_DEFAULT_TARGET_OPTIMIZATION="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc" CONFIG_CPU_TYPE="24kc" CONFIG_LINUX_4_9=y CONFIG_DEFAULT_ath10k-firmware-qca988x=y CONFIG_DEFAULT_base-files=y CONFIG_DEFAULT_block-mount=y CONFIG_DEFAULT_busybox=y CONFIG_DEFAULT_ca-certificates=y CONFIG_DEFAULT_coremark=y CONFIG_DEFAULT_ddns-scripts_aliyun=y CONFIG_DEFAULT_ddns-scripts_dnspod=y CONFIG_DEFAULT_default-settings=y CONFIG_DEFAULT_dnsmasq-full=y CONFIG_DEFAULT_dropbear=y CONFIG_DEFAULT_firewall=y CONFIG_DEFAULT_fstools=y CONFIG_DEFAULT_iptables=y CONFIG_DEFAULT_kmod-ath10k=y CONFIG_DEFAULT_kmod-ath9k=y CONFIG_DEFAULT_kmod-gpio-button-hotplug=y CONFIG_DEFAULT_kmod-ipt-offload=y CONFIG_DEFAULT_kmod-ipt-raw=y CONFIG_DEFAULT_kmod-nf-nathelper=y CONFIG_DEFAULT_kmod-nf-nathelper-extra=y CONFIG_DEFAULT_kmod-tcp-bbr=y CONFIG_DEFAULT_kmod-usb-core=y CONFIG_DEFAULT_kmod-usb-ledtrig-usbport=y CONFIG_DEFAULT_kmod-usb2=y CONFIG_DEFAULT_libc=y CONFIG_DEFAULT_libgcc=y CONFIG_DEFAULT_libustream-openssl=y CONFIG_DEFAULT_logd=y CONFIG_DEFAULT_luci=y CONFIG_DEFAULT_luci-app-accesscontrol=y CONFIG_DEFAULT_luci-app-adbyby-plus=y CONFIG_DEFAULT_luci-app-arpbind=y CONFIG_DEFAULT_luci-app-autoreboot=y CONFIG_DEFAULT_luci-app-cpufreq=y CONFIG_DEFAULT_luci-app-ddns=y CONFIG_DEFAULT_luci-app-filetransfer=y CONFIG_DEFAULT_luci-app-flowoffload=y CONFIG_DEFAULT_luci-app-nlbwmon=y CONFIG_DEFAULT_luci-app-ramfree=y CONFIG_DEFAULT_luci-app-sfe=y CONFIG_DEFAULT_luci-app-ssr-plus=y CONFIG_DEFAULT_luci-app-unblockmusic=y CONFIG_DEFAULT_luci-app-upnp=y CONFIG_DEFAULT_luci-app-vlmcsd=y CONFIG_DEFAULT_luci-app-vsftpd=y CONFIG_DEFAULT_luci-app-wol=y CONFIG_DEFAULT_mtd=y CONFIG_DEFAULT_netifd=y CONFIG_DEFAULT_opkg=y CONFIG_DEFAULT_ppp=y CONFIG_DEFAULT_ppp-mod-pppoe=y CONFIG_DEFAULT_swconfig=y CONFIG_DEFAULT_uboot-envtools=y CONFIG_DEFAULT_uci=y CONFIG_DEFAULT_uclient-fetch=y CONFIG_DEFAULT_urandom-seed=y CONFIG_DEFAULT_urngd=y CONFIG_DEFAULT_wget=y CONFIG_DEFAULT_wpad-openssl=y CONFIG_AUDIO_SUPPORT=y CONFIG_GPIO_SUPPORT=y CONFIG_PCI_SUPPORT=y CONFIG_USB_SUPPORT=y CONFIG_USB_GADGET_SUPPORT=y CONFIG_BIG_ENDIAN=y CONFIG_USES_SQUASHFS=y CONFIG_SMALL_FLASH=y CONFIG_HAS_MIPS16=y CONFIG_mips=y CONFIG_ARCH="mips" # # Target Images # # CONFIG_TARGET_ROOTFS_INITRAMFS is not set CONFIG_EXTERNAL_CPIO="" # # Root filesystem archives # # CONFIG_TARGET_ROOTFS_CPIOGZ is not set # CONFIG_TARGET_ROOTFS_TARGZ is not set # # Root filesystem images # # CONFIG_TARGET_ROOTFS_EXT4FS is not set CONFIG_TARGET_ROOTFS_SQUASHFS=y CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=1024 CONFIG_TARGET_UBIFS_FREE_SPACE_FIXUP=y CONFIG_TARGET_UBIFS_JOURNAL_SIZE="" # # Image Options # # # Global build settings # # CONFIG_JSON_ADD_IMAGE_INFO is not set # CONFIG_ALL_NONSHARED is not set # CONFIG_ALL_KMODS is not set # CONFIG_ALL is not set # CONFIG_BUILDBOT is not set # CONFIG_SIGNED_PACKAGES is not set # CONFIG_SIGNATURE_CHECK is not set # # General build options # # CONFIG_DISPLAY_SUPPORT is not set CONFIG_BUILD_PATENTED=y # CONFIG_BUILD_NLS is not set CONFIG_SHADOW_PASSWORDS=y # CONFIG_CLEAN_IPKG is not set # CONFIG_INCLUDE_CONFIG is not set # CONFIG_COLLECT_KERNEL_DEBUG is not set # # Kernel build options # CONFIG_KERNEL_BUILD_USER="" CONFIG_KERNEL_BUILD_DOMAIN="" CONFIG_KERNEL_PRINTK=y CONFIG_KERNEL_CRASHLOG=y # CONFIG_KERNEL_SWAP is not set CONFIG_KERNEL_DEBUG_FS=y CONFIG_KERNEL_MIPS_FPU_EMULATOR=y # CONFIG_KERNEL_PERF_EVENTS is not set # CONFIG_KERNEL_PROFILING is not set # CONFIG_KERNEL_TASKSTATS is not set # CONFIG_KERNEL_KALLSYMS is not set # CONFIG_KERNEL_FTRACE is not set # CONFIG_KERNEL_DEBUG_KERNEL is not set # CONFIG_KERNEL_DEBUG_INFO is not set # CONFIG_KERNEL_DYNAMIC_DEBUG is not set # CONFIG_KERNEL_KPROBES is not set # CONFIG_KERNEL_AIO is not set # CONFIG_KERNEL_FHANDLE is not set # CONFIG_KERNEL_FANOTIFY is not set # CONFIG_KERNEL_BLK_DEV_BSG is not set CONFIG_KERNEL_MAGIC_SYSRQ=y # CONFIG_KERNEL_DEBUG_PINCTRL is not set # CONFIG_KERNEL_DEBUG_GPIO is not set # CONFIG_KERNEL_ELF_CORE is not set # CONFIG_KERNEL_PROVE_LOCKING is not set CONFIG_KERNEL_PRINTK_TIME=y # CONFIG_KERNEL_SLABINFO is not set # CONFIG_KERNEL_PROC_PAGE_MONITOR is not set # CONFIG_KERNEL_KEXEC is not set # CONFIG_USE_RFKILL is not set # CONFIG_USE_SPARSE is not set # CONFIG_KERNEL_DEVTMPFS is not set CONFIG_KERNEL_KEYS=y # CONFIG_KERNEL_PERSISTENT_KEYRINGS is not set # CONFIG_KERNEL_BIG_KEYS is not set # CONFIG_KERNEL_ENCRYPTED_KEYS is not set CONFIG_KERNEL_CGROUPS=y # CONFIG_KERNEL_CGROUP_DEBUG is not set CONFIG_KERNEL_FREEZER=y CONFIG_KERNEL_CGROUP_FREEZER=y CONFIG_KERNEL_CGROUP_DEVICE=y CONFIG_KERNEL_CGROUP_PIDS=y CONFIG_KERNEL_CPUSETS=y # CONFIG_KERNEL_PROC_PID_CPUSET is not set CONFIG_KERNEL_CGROUP_CPUACCT=y # CONFIG_KERNEL_RESOURCE_COUNTERS is not set CONFIG_KERNEL_MM_OWNER=y CONFIG_KERNEL_MEMCG=y # CONFIG_KERNEL_MEMCG_SWAP is not set # CONFIG_KERNEL_MEMCG_KMEM is not set # CONFIG_KERNEL_CGROUP_PERF is not set CONFIG_KERNEL_CGROUP_SCHED=y # CONFIG_KERNEL_FAIR_GROUP_SCHED is not set # CONFIG_KERNEL_RT_GROUP_SCHED is not set CONFIG_KERNEL_BLK_CGROUP=y # CONFIG_KERNEL_CFQ_GROUP_IOSCHED is not set # CONFIG_KERNEL_BLK_DEV_THROTTLING is not set # CONFIG_KERNEL_DEBUG_BLK_CGROUP is not set CONFIG_KERNEL_NET_CLS_CGROUP=y CONFIG_KERNEL_NETPRIO_CGROUP=y CONFIG_KERNEL_NAMESPACES=y CONFIG_KERNEL_UTS_NS=y CONFIG_KERNEL_IPC_NS=y CONFIG_KERNEL_USER_NS=y CONFIG_KERNEL_PID_NS=y CONFIG_KERNEL_NET_NS=y CONFIG_KERNEL_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_KERNEL_POSIX_MQUEUE=y # CONFIG_KERNEL_SECCOMP_FILTER is not set # CONFIG_KERNEL_SECCOMP is not set CONFIG_KERNEL_IP_MROUTE=y CONFIG_KERNEL_IPV6=y CONFIG_KERNEL_IPV6_MULTIPLE_TABLES=y CONFIG_KERNEL_IPV6_SUBTREES=y CONFIG_KERNEL_IPV6_MROUTE=y # CONFIG_KERNEL_IPV6_PIMSM_V2 is not set # CONFIG_KERNEL_IP_PNP is not set # # Filesystem ACL and attr support options # # CONFIG_USE_FS_ACL_ATTR is not set # CONFIG_KERNEL_FS_POSIX_ACL is not set # CONFIG_KERNEL_BTRFS_FS_POSIX_ACL is not set # CONFIG_KERNEL_EXT4_FS_POSIX_ACL is not set # CONFIG_KERNEL_F2FS_FS_POSIX_ACL is not set # CONFIG_KERNEL_JFFS2_FS_POSIX_ACL is not set # CONFIG_KERNEL_TMPFS_POSIX_ACL is not set # CONFIG_KERNEL_CIFS_ACL is not set # CONFIG_KERNEL_HFS_FS_POSIX_ACL is not set # CONFIG_KERNEL_HFSPLUG_FS_POSIX_ACL is not set # CONFIG_KERNEL_NFS_ACL_SUPPORT is not set # CONFIG_KERNEL_NFS_V3_ACL_SUPPORT is not set # CONFIG_KERNEL_NFSD_V2_ACL_SUPPORT is not set # CONFIG_KERNEL_NFSD_V3_ACL_SUPPORT is not set # CONFIG_KERNEL_REISER_FS_POSIX_ACL is not set # CONFIG_KERNEL_XFS_POSIX_ACL is not set # CONFIG_KERNEL_JFS_POSIX_ACL is not set # CONFIG_KERNEL_DEVMEM is not set # CONFIG_KERNEL_DEVKMEM is not set CONFIG_KERNEL_SQUASHFS_FRAGMENT_CACHE_SIZE=2 # CONFIG_KERNEL_CC_OPTIMIZE_FOR_PERFORMANCE is not set CONFIG_KERNEL_CC_OPTIMIZE_FOR_SIZE=y # # Package build options # # CONFIG_DEBUG is not set CONFIG_IPV6=y # # Stripping options # # CONFIG_NO_STRIP is not set # CONFIG_USE_STRIP is not set CONFIG_USE_SSTRIP=y # CONFIG_STRIP_KERNEL_EXPORTS is not set # CONFIG_USE_MKLIBS is not set CONFIG_USE_UCLIBCXX=y # CONFIG_USE_LIBCXX is not set # CONFIG_USE_LIBSTDCXX is not set # # Hardening build options # CONFIG_PKG_CHECK_FORMAT_SECURITY=y CONFIG_PKG_ASLR_PIE_NONE=y # CONFIG_PKG_ASLR_PIE_REGULAR is not set # CONFIG_PKG_ASLR_PIE_ALL is not set # CONFIG_PKG_CC_STACKPROTECTOR_NONE is not set CONFIG_PKG_CC_STACKPROTECTOR_REGULAR=y # CONFIG_KERNEL_CC_STACKPROTECTOR_NONE is not set CONFIG_KERNEL_CC_STACKPROTECTOR_REGULAR=y # CONFIG_KERNEL_CC_STACKPROTECTOR_STRONG is not set CONFIG_KERNEL_STACKPROTECTOR=y # CONFIG_KERNEL_STACKPROTECTOR_STRONG is not set # CONFIG_PKG_FORTIFY_SOURCE_NONE is not set CONFIG_PKG_FORTIFY_SOURCE_1=y # CONFIG_PKG_FORTIFY_SOURCE_2 is not set # CONFIG_PKG_RELRO_NONE is not set # CONFIG_PKG_RELRO_PARTIAL is not set CONFIG_PKG_RELRO_FULL=y # CONFIG_DEVEL is not set # CONFIG_BROKEN is not set CONFIG_BINARY_FOLDER="" CONFIG_DOWNLOAD_FOLDER="" CONFIG_LOCALMIRROR="" CONFIG_AUTOREBUILD=y # CONFIG_AUTOREMOVE is not set CONFIG_BUILD_SUFFIX="" CONFIG_TARGET_ROOTFS_DIR="" # CONFIG_CCACHE is not set CONFIG_EXTERNAL_KERNEL_TREE="" CONFIG_KERNEL_GIT_CLONE_URI="" CONFIG_EXTRA_OPTIMIZATION="-fno-caller-saves -fno-plt" CONFIG_TARGET_OPTIMIZATION="-Os -pipe -mno-branch-likely -mips32r2 -mtune=24kc" CONFIG_SOFT_FLOAT=y CONFIG_USE_MIPS16=y # CONFIG_EXTRA_TARGET_ARCH is not set CONFIG_EXTRA_BINUTILS_CONFIG_OPTIONS="" CONFIG_EXTRA_GCC_CONFIG_OPTIONS="" # CONFIG_GCC_DEFAULT_PIE is not set # CONFIG_GCC_DEFAULT_SSP is not set # CONFIG_SJLJ_EXCEPTIONS is not set # CONFIG_INSTALL_GFORTRAN is not set CONFIG_GDB=y CONFIG_USE_MUSL=y CONFIG_SSP_SUPPORT=y CONFIG_BINUTILS_VERSION_2_31_1=y CONFIG_BINUTILS_VERSION="2.31.1" # CONFIG_GCC_USE_EMBEDDED_PATH_REMAP is not set CONFIG_GCC_VERSION="7.5.0" CONFIG_LIBC="musl" CONFIG_TARGET_SUFFIX="musl" # CONFIG_IB is not set # CONFIG_SDK is not set # CONFIG_MAKE_TOOLCHAIN is not set # CONFIG_IMAGEOPT is not set # CONFIG_PREINITOPT is not set CONFIG_TARGET_PREINIT_SUPPRESS_STDERR=y # CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE is not set CONFIG_TARGET_PREINIT_TIMEOUT=2 # CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set # CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set CONFIG_TARGET_PREINIT_IFNAME="" CONFIG_TARGET_PREINIT_IP="192.168.1.1" CONFIG_TARGET_PREINIT_NETMASK="255.255.255.0" CONFIG_TARGET_PREINIT_BROADCAST="192.168.1.255" # CONFIG_INITOPT is not set CONFIG_TARGET_INIT_PATH="/usr/sbin:/usr/bin:/sbin:/bin" CONFIG_TARGET_INIT_ENV="" CONFIG_TARGET_INIT_CMD="/sbin/init" CONFIG_TARGET_INIT_SUPPRESS_STDERR=y # CONFIG_VERSIONOPT is not set CONFIG_PER_FEED_REPO=y CONFIG_FEED_packages=y CONFIG_FEED_luci=y CONFIG_FEED_routing=y # # Base system # # CONFIG_PACKAGE_attendedsysupgrade-common is not set # CONFIG_PACKAGE_auc is not set CONFIG_PACKAGE_base-files=y CONFIG_PACKAGE_block-mount=y # CONFIG_PACKAGE_blockd is not set # CONFIG_PACKAGE_bridge is not set CONFIG_PACKAGE_busybox=y # CONFIG_BUSYBOX_CUSTOM is not set CONFIG_BUSYBOX_DEFAULT_HAVE_DOT_CONFIG=y # CONFIG_BUSYBOX_DEFAULT_DESKTOP is not set # CONFIG_BUSYBOX_DEFAULT_EXTRA_COMPAT is not set # CONFIG_BUSYBOX_DEFAULT_FEDORA_COMPAT is not set CONFIG_BUSYBOX_DEFAULT_INCLUDE_SUSv2=y CONFIG_BUSYBOX_DEFAULT_LONG_OPTS=y CONFIG_BUSYBOX_DEFAULT_SHOW_USAGE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VERBOSE_USAGE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_COMPRESS_USAGE=y CONFIG_BUSYBOX_DEFAULT_LFS=y # CONFIG_BUSYBOX_DEFAULT_PAM is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_DEVPTS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_UTMP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WTMP is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_PIDFILE=y CONFIG_BUSYBOX_DEFAULT_PID_FILE_PATH="/var/run" # CONFIG_BUSYBOX_DEFAULT_BUSYBOX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SHOW_SCRIPT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSTALLER is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_NO_USR is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SUID=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SUID_CONFIG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SUID_CONFIG_QUIET is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_PREFER_APPLETS=y CONFIG_BUSYBOX_DEFAULT_BUSYBOX_EXEC_PATH="/proc/self/exe" # CONFIG_BUSYBOX_DEFAULT_SELINUX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CLEAN_UP is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOG=y CONFIG_BUSYBOX_DEFAULT_PLATFORM_LINUX=y # CONFIG_BUSYBOX_DEFAULT_STATIC is not set # CONFIG_BUSYBOX_DEFAULT_PIE is not set # CONFIG_BUSYBOX_DEFAULT_NOMMU is not set # CONFIG_BUSYBOX_DEFAULT_BUILD_LIBBUSYBOX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LIBBUSYBOX_STATIC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INDIVIDUAL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SHARED_BUSYBOX is not set CONFIG_BUSYBOX_DEFAULT_CROSS_COMPILER_PREFIX="" CONFIG_BUSYBOX_DEFAULT_SYSROOT="" CONFIG_BUSYBOX_DEFAULT_EXTRA_CFLAGS="" CONFIG_BUSYBOX_DEFAULT_EXTRA_LDFLAGS="" CONFIG_BUSYBOX_DEFAULT_EXTRA_LDLIBS="" # CONFIG_BUSYBOX_DEFAULT_USE_PORTABLE_CODE is not set # CONFIG_BUSYBOX_DEFAULT_STACK_OPTIMIZATION_386 is not set CONFIG_BUSYBOX_DEFAULT_INSTALL_APPLET_SYMLINKS=y # CONFIG_BUSYBOX_DEFAULT_INSTALL_APPLET_HARDLINKS is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_APPLET_SCRIPT_WRAPPERS is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_APPLET_DONT is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_SH_APPLET_SYMLINK is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_SH_APPLET_HARDLINK is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set CONFIG_BUSYBOX_DEFAULT_PREFIX="./_install" # CONFIG_BUSYBOX_DEFAULT_DEBUG is not set # CONFIG_BUSYBOX_DEFAULT_DEBUG_PESSIMIZE is not set # CONFIG_BUSYBOX_DEFAULT_DEBUG_SANITIZE is not set # CONFIG_BUSYBOX_DEFAULT_UNIT_TEST is not set # CONFIG_BUSYBOX_DEFAULT_WERROR is not set CONFIG_BUSYBOX_DEFAULT_NO_DEBUG_LIB=y # CONFIG_BUSYBOX_DEFAULT_DMALLOC is not set # CONFIG_BUSYBOX_DEFAULT_EFENCE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_USE_BSS_TAIL is not set # CONFIG_BUSYBOX_DEFAULT_FLOAT_DURATION is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RTMINMAX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BUFFERS_USE_MALLOC is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_BUFFERS_GO_ON_STACK=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_BUFFERS_GO_IN_BSS is not set CONFIG_BUSYBOX_DEFAULT_PASSWORD_MINLEN=6 CONFIG_BUSYBOX_DEFAULT_MD5_SMALL=1 CONFIG_BUSYBOX_DEFAULT_SHA3_SMALL=1 CONFIG_BUSYBOX_DEFAULT_FEATURE_FAST_TOP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING=y CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_MAX_LEN=512 # CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_VI is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_HISTORY=256 # CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_SAVEHISTORY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_SAVE_ON_EXIT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_REVERSE_SEARCH is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TAB_COMPLETION=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_USERNAME_COMPLETION is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_FANCY_PROMPT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_WINCH is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_EDITING_ASK_TERMINAL is not set # CONFIG_BUSYBOX_DEFAULT_LOCALE_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_USING_LOCALE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHECK_UNICODE_IN_ENV is not set CONFIG_BUSYBOX_DEFAULT_SUBST_WCHAR=0 CONFIG_BUSYBOX_DEFAULT_LAST_SUPPORTED_WCHAR=0 # CONFIG_BUSYBOX_DEFAULT_UNICODE_COMBINING_WCHARS is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_WIDE_WCHARS is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_BIDI_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_NEUTRAL_TABLE is not set # CONFIG_BUSYBOX_DEFAULT_UNICODE_PRESERVE_BROKEN is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB=4 # CONFIG_BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS is not set # CONFIG_BUSYBOX_DEFAULT_MONOTONIC_SYSCALL is not set CONFIG_BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_HWIB is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_XZ is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_LZMA is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_BZ2 is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_GZ=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z is not set # CONFIG_BUSYBOX_DEFAULT_AR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_AR_LONG_FILENAMES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_AR_CREATE is not set # CONFIG_BUSYBOX_DEFAULT_UNCOMPRESS is not set CONFIG_BUSYBOX_DEFAULT_GUNZIP=y CONFIG_BUSYBOX_DEFAULT_ZCAT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_GUNZIP_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_BUNZIP2=y CONFIG_BUSYBOX_DEFAULT_BZCAT=y # CONFIG_BUSYBOX_DEFAULT_UNLZMA is not set # CONFIG_BUSYBOX_DEFAULT_LZCAT is not set # CONFIG_BUSYBOX_DEFAULT_LZMA is not set # CONFIG_BUSYBOX_DEFAULT_UNXZ is not set # CONFIG_BUSYBOX_DEFAULT_XZCAT is not set # CONFIG_BUSYBOX_DEFAULT_XZ is not set # CONFIG_BUSYBOX_DEFAULT_BZIP2 is not set CONFIG_BUSYBOX_DEFAULT_BZIP2_SMALL=0 CONFIG_BUSYBOX_DEFAULT_FEATURE_BZIP2_DECOMPRESS=y # CONFIG_BUSYBOX_DEFAULT_CPIO is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CPIO_O is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CPIO_P is not set # CONFIG_BUSYBOX_DEFAULT_DPKG is not set # CONFIG_BUSYBOX_DEFAULT_DPKG_DEB is not set CONFIG_BUSYBOX_DEFAULT_GZIP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_GZIP_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_GZIP_FAST=0 # CONFIG_BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_GZIP_DECOMPRESS=y # CONFIG_BUSYBOX_DEFAULT_LZOP is not set # CONFIG_BUSYBOX_DEFAULT_UNLZOP is not set # CONFIG_BUSYBOX_DEFAULT_LZOPCAT is not set # CONFIG_BUSYBOX_DEFAULT_LZOP_COMPR_HIGH is not set # CONFIG_BUSYBOX_DEFAULT_RPM is not set # CONFIG_BUSYBOX_DEFAULT_RPM2CPIO is not set CONFIG_BUSYBOX_DEFAULT_TAR=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_CREATE=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_AUTODETECT is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_FROM=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_GNU_EXTENSIONS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_TO_COMMAND is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_UNAME_GNAME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_NOPRESERVE_TIME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TAR_SELINUX is not set # CONFIG_BUSYBOX_DEFAULT_UNZIP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UNZIP_CDF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UNZIP_BZIP2 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UNZIP_LZMA is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UNZIP_XZ is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LZMA_FAST is not set CONFIG_BUSYBOX_DEFAULT_BASENAME=y CONFIG_BUSYBOX_DEFAULT_CAT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_CATN is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CATV is not set CONFIG_BUSYBOX_DEFAULT_CHGRP=y CONFIG_BUSYBOX_DEFAULT_CHMOD=y CONFIG_BUSYBOX_DEFAULT_CHOWN=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHOWN_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_CHROOT=y # CONFIG_BUSYBOX_DEFAULT_CKSUM is not set # CONFIG_BUSYBOX_DEFAULT_COMM is not set CONFIG_BUSYBOX_DEFAULT_CP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_CP_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CP_REFLINK is not set CONFIG_BUSYBOX_DEFAULT_CUT=y CONFIG_BUSYBOX_DEFAULT_DATE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_DATE_ISOFMT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_DATE_NANO is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DATE_COMPAT is not set CONFIG_BUSYBOX_DEFAULT_DD=y CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_DD_STATUS is not set CONFIG_BUSYBOX_DEFAULT_DF=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_DF_FANCY is not set CONFIG_BUSYBOX_DEFAULT_DIRNAME=y # CONFIG_BUSYBOX_DEFAULT_DOS2UNIX is not set # CONFIG_BUSYBOX_DEFAULT_UNIX2DOS is not set CONFIG_BUSYBOX_DEFAULT_DU=y CONFIG_BUSYBOX_DEFAULT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y CONFIG_BUSYBOX_DEFAULT_ECHO=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_ECHO=y CONFIG_BUSYBOX_DEFAULT_ENV=y # CONFIG_BUSYBOX_DEFAULT_EXPAND is not set # CONFIG_BUSYBOX_DEFAULT_UNEXPAND is not set CONFIG_BUSYBOX_DEFAULT_EXPR=y CONFIG_BUSYBOX_DEFAULT_EXPR_MATH_SUPPORT_64=y # CONFIG_BUSYBOX_DEFAULT_FACTOR is not set CONFIG_BUSYBOX_DEFAULT_FALSE=y # CONFIG_BUSYBOX_DEFAULT_FOLD is not set CONFIG_BUSYBOX_DEFAULT_FSYNC=y CONFIG_BUSYBOX_DEFAULT_HEAD=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_HEAD=y # CONFIG_BUSYBOX_DEFAULT_HOSTID is not set CONFIG_BUSYBOX_DEFAULT_ID=y # CONFIG_BUSYBOX_DEFAULT_GROUPS is not set # CONFIG_BUSYBOX_DEFAULT_INSTALL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSTALL_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_LINK is not set CONFIG_BUSYBOX_DEFAULT_LN=y # CONFIG_BUSYBOX_DEFAULT_LOGNAME is not set CONFIG_BUSYBOX_DEFAULT_LS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_FILETYPES=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_FOLLOWLINKS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_RECURSIVE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_WIDTH=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_SORTFILES=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_TIMESTAMPS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_USERNAME=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_COLOR=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LS_COLOR_IS_DEFAULT=y CONFIG_BUSYBOX_DEFAULT_MD5SUM=y # CONFIG_BUSYBOX_DEFAULT_SHA1SUM is not set CONFIG_BUSYBOX_DEFAULT_SHA256SUM=y # CONFIG_BUSYBOX_DEFAULT_SHA512SUM is not set # CONFIG_BUSYBOX_DEFAULT_SHA3SUM is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_MD5_SHA1_SUM_CHECK=y CONFIG_BUSYBOX_DEFAULT_MKDIR=y CONFIG_BUSYBOX_DEFAULT_MKFIFO=y CONFIG_BUSYBOX_DEFAULT_MKNOD=y CONFIG_BUSYBOX_DEFAULT_MKTEMP=y CONFIG_BUSYBOX_DEFAULT_MV=y CONFIG_BUSYBOX_DEFAULT_NICE=y # CONFIG_BUSYBOX_DEFAULT_NL is not set # CONFIG_BUSYBOX_DEFAULT_NOHUP is not set # CONFIG_BUSYBOX_DEFAULT_NPROC is not set # CONFIG_BUSYBOX_DEFAULT_OD is not set # CONFIG_BUSYBOX_DEFAULT_PASTE is not set # CONFIG_BUSYBOX_DEFAULT_PRINTENV is not set CONFIG_BUSYBOX_DEFAULT_PRINTF=y CONFIG_BUSYBOX_DEFAULT_PWD=y CONFIG_BUSYBOX_DEFAULT_READLINK=y CONFIG_BUSYBOX_DEFAULT_FEATURE_READLINK_FOLLOW=y # CONFIG_BUSYBOX_DEFAULT_REALPATH is not set CONFIG_BUSYBOX_DEFAULT_RM=y CONFIG_BUSYBOX_DEFAULT_RMDIR=y CONFIG_BUSYBOX_DEFAULT_SEQ=y # CONFIG_BUSYBOX_DEFAULT_SHRED is not set # CONFIG_BUSYBOX_DEFAULT_SHUF is not set CONFIG_BUSYBOX_DEFAULT_SLEEP=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_SLEEP=y CONFIG_BUSYBOX_DEFAULT_SORT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SORT_BIG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SORT_OPTIMIZE_MEMORY is not set # CONFIG_BUSYBOX_DEFAULT_SPLIT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SPLIT_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_STAT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_STAT_FORMAT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_STAT_FILESYSTEM is not set # CONFIG_BUSYBOX_DEFAULT_STTY is not set # CONFIG_BUSYBOX_DEFAULT_SUM is not set CONFIG_BUSYBOX_DEFAULT_SYNC=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_TAC is not set CONFIG_BUSYBOX_DEFAULT_TAIL=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_TAIL=y CONFIG_BUSYBOX_DEFAULT_TEE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_TEE_USE_BLOCK_IO=y CONFIG_BUSYBOX_DEFAULT_TEST=y CONFIG_BUSYBOX_DEFAULT_TEST1=y CONFIG_BUSYBOX_DEFAULT_TEST2=y CONFIG_BUSYBOX_DEFAULT_FEATURE_TEST_64=y # CONFIG_BUSYBOX_DEFAULT_TIMEOUT is not set CONFIG_BUSYBOX_DEFAULT_TOUCH=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOUCH_NODEREF is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3=y CONFIG_BUSYBOX_DEFAULT_TR=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TR_CLASSES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TR_EQUIV is not set CONFIG_BUSYBOX_DEFAULT_TRUE=y # CONFIG_BUSYBOX_DEFAULT_TRUNCATE is not set # CONFIG_BUSYBOX_DEFAULT_TTY is not set CONFIG_BUSYBOX_DEFAULT_UNAME=y CONFIG_BUSYBOX_DEFAULT_UNAME_OSNAME="GNU/Linux" # CONFIG_BUSYBOX_DEFAULT_BB_ARCH is not set CONFIG_BUSYBOX_DEFAULT_UNIQ=y # CONFIG_BUSYBOX_DEFAULT_UNLINK is not set # CONFIG_BUSYBOX_DEFAULT_USLEEP is not set # CONFIG_BUSYBOX_DEFAULT_UUDECODE is not set # CONFIG_BUSYBOX_DEFAULT_BASE64 is not set # CONFIG_BUSYBOX_DEFAULT_UUENCODE is not set CONFIG_BUSYBOX_DEFAULT_WC=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_WC_LARGE is not set # CONFIG_BUSYBOX_DEFAULT_WHO is not set # CONFIG_BUSYBOX_DEFAULT_W is not set # CONFIG_BUSYBOX_DEFAULT_USERS is not set # CONFIG_BUSYBOX_DEFAULT_WHOAMI is not set CONFIG_BUSYBOX_DEFAULT_YES=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_VERBOSE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE=y # CONFIG_BUSYBOX_DEFAULT_CHVT is not set CONFIG_BUSYBOX_DEFAULT_CLEAR=y # CONFIG_BUSYBOX_DEFAULT_DEALLOCVT is not set # CONFIG_BUSYBOX_DEFAULT_DUMPKMAP is not set # CONFIG_BUSYBOX_DEFAULT_FGCONSOLE is not set # CONFIG_BUSYBOX_DEFAULT_KBD_MODE is not set # CONFIG_BUSYBOX_DEFAULT_LOADFONT is not set # CONFIG_BUSYBOX_DEFAULT_SETFONT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETFONT_TEXTUAL_MAP is not set CONFIG_BUSYBOX_DEFAULT_DEFAULT_SETFONT_DIR="" # CONFIG_BUSYBOX_DEFAULT_FEATURE_LOADFONT_PSF2 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LOADFONT_RAW is not set # CONFIG_BUSYBOX_DEFAULT_LOADKMAP is not set # CONFIG_BUSYBOX_DEFAULT_OPENVT is not set CONFIG_BUSYBOX_DEFAULT_RESET=y # CONFIG_BUSYBOX_DEFAULT_RESIZE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RESIZE_PRINT is not set # CONFIG_BUSYBOX_DEFAULT_SETCONSOLE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETCONSOLE_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_SETKEYCODES is not set # CONFIG_BUSYBOX_DEFAULT_SETLOGCONS is not set # CONFIG_BUSYBOX_DEFAULT_SHOWKEY is not set # CONFIG_BUSYBOX_DEFAULT_PIPE_PROGRESS is not set # CONFIG_BUSYBOX_DEFAULT_RUN_PARTS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RUN_PARTS_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RUN_PARTS_FANCY is not set CONFIG_BUSYBOX_DEFAULT_START_STOP_DAEMON=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_START_STOP_DAEMON_FANCY is not set CONFIG_BUSYBOX_DEFAULT_WHICH=y # CONFIG_BUSYBOX_DEFAULT_MINIPS is not set # CONFIG_BUSYBOX_DEFAULT_NUKE is not set # CONFIG_BUSYBOX_DEFAULT_RESUME is not set # CONFIG_BUSYBOX_DEFAULT_RUN_INIT is not set CONFIG_BUSYBOX_DEFAULT_AWK=y CONFIG_BUSYBOX_DEFAULT_FEATURE_AWK_LIBM=y CONFIG_BUSYBOX_DEFAULT_FEATURE_AWK_GNU_EXTENSIONS=y CONFIG_BUSYBOX_DEFAULT_CMP=y # CONFIG_BUSYBOX_DEFAULT_DIFF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DIFF_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DIFF_DIR is not set # CONFIG_BUSYBOX_DEFAULT_ED is not set # CONFIG_BUSYBOX_DEFAULT_PATCH is not set CONFIG_BUSYBOX_DEFAULT_SED=y CONFIG_BUSYBOX_DEFAULT_VI=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_MAX_LEN=1024 # CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_8BIT is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_COLON=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_YANKMARK=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SEARCH=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_REGEX_SEARCH is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_USE_SIGNALS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_DOT_CMD=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_READONLY=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SETOPTS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_SET=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_WIN_RESIZE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_ASK_TERMINAL=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_UNDO is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_VI_UNDO_QUEUE_MAX=0 CONFIG_BUSYBOX_DEFAULT_FEATURE_ALLOW_EXEC=y CONFIG_BUSYBOX_DEFAULT_FIND=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PRINT0=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MTIME=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MMIN is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PERM=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_TYPE=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_EXECUTABLE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_XDEV=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_MAXDEPTH=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_NEWER=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_INUM is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_EXEC=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_EXEC_PLUS is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_USER=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_GROUP=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_NOT=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_DEPTH=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PAREN=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_SIZE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PRUNE=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_QUIT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_DELETE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_PATH=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_REGEX=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_CONTEXT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FIND_LINKS is not set CONFIG_BUSYBOX_DEFAULT_GREP=y CONFIG_BUSYBOX_DEFAULT_EGREP=y CONFIG_BUSYBOX_DEFAULT_FGREP=y CONFIG_BUSYBOX_DEFAULT_FEATURE_GREP_CONTEXT=y CONFIG_BUSYBOX_DEFAULT_XARGS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_CONFIRMATION=y CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_QUOTES=y CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_TERMOPT=y CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_ZERO_TERM=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_REPL_STR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_PARALLEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_ARGS_FILE is not set # CONFIG_BUSYBOX_DEFAULT_BOOTCHARTD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BOOTCHARTD_CONFIG_FILE is not set CONFIG_BUSYBOX_DEFAULT_HALT=y CONFIG_BUSYBOX_DEFAULT_POWEROFF=y CONFIG_BUSYBOX_DEFAULT_REBOOT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_WAIT_FOR_INIT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CALL_TELINIT is not set CONFIG_BUSYBOX_DEFAULT_TELINIT_PATH="" # CONFIG_BUSYBOX_DEFAULT_INIT is not set # CONFIG_BUSYBOX_DEFAULT_LINUXRC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_USE_INITTAB is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_KILL_REMOVED is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_KILL_DELAY=0 # CONFIG_BUSYBOX_DEFAULT_FEATURE_INIT_SCTTY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INIT_SYSLOG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INIT_QUIET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INIT_COREDUMPS is not set CONFIG_BUSYBOX_DEFAULT_INIT_TERMINAL_TYPE="" # CONFIG_BUSYBOX_DEFAULT_FEATURE_INIT_MODIFY_CMDLINE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SHADOWPASSWDS=y # CONFIG_BUSYBOX_DEFAULT_USE_BB_PWD_GRP is not set # CONFIG_BUSYBOX_DEFAULT_USE_BB_SHADOW is not set # CONFIG_BUSYBOX_DEFAULT_USE_BB_CRYPT is not set # CONFIG_BUSYBOX_DEFAULT_USE_BB_CRYPT_SHA is not set # CONFIG_BUSYBOX_DEFAULT_ADD_SHELL is not set # CONFIG_BUSYBOX_DEFAULT_REMOVE_SHELL is not set # CONFIG_BUSYBOX_DEFAULT_ADDGROUP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_ADDUSER_TO_GROUP is not set # CONFIG_BUSYBOX_DEFAULT_ADDUSER is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHECK_NAMES is not set CONFIG_BUSYBOX_DEFAULT_LAST_ID=0 CONFIG_BUSYBOX_DEFAULT_FIRST_SYSTEM_ID=0 CONFIG_BUSYBOX_DEFAULT_LAST_SYSTEM_ID=0 # CONFIG_BUSYBOX_DEFAULT_CHPASSWD is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_DEFAULT_PASSWD_ALGO="md5" # CONFIG_BUSYBOX_DEFAULT_CRYPTPW is not set # CONFIG_BUSYBOX_DEFAULT_MKPASSWD is not set # CONFIG_BUSYBOX_DEFAULT_DELUSER is not set # CONFIG_BUSYBOX_DEFAULT_DELGROUP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DEL_USER_FROM_GROUP is not set # CONFIG_BUSYBOX_DEFAULT_GETTY is not set CONFIG_BUSYBOX_DEFAULT_LOGIN=y CONFIG_BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD=y # CONFIG_BUSYBOX_DEFAULT_LOGIN_SCRIPTS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_NOLOGIN is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SECURETTY is not set CONFIG_BUSYBOX_DEFAULT_PASSWD=y CONFIG_BUSYBOX_DEFAULT_FEATURE_PASSWD_WEAK_CHECK=y # CONFIG_BUSYBOX_DEFAULT_SU is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SU_SYSLOG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SU_CHECKS_SHELLS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY is not set # CONFIG_BUSYBOX_DEFAULT_SULOGIN is not set # CONFIG_BUSYBOX_DEFAULT_VLOCK is not set # CONFIG_BUSYBOX_DEFAULT_CHATTR is not set # CONFIG_BUSYBOX_DEFAULT_FSCK is not set # CONFIG_BUSYBOX_DEFAULT_LSATTR is not set # CONFIG_BUSYBOX_DEFAULT_TUNE2FS is not set # CONFIG_BUSYBOX_DEFAULT_MODPROBE_SMALL is not set # CONFIG_BUSYBOX_DEFAULT_DEPMOD is not set # CONFIG_BUSYBOX_DEFAULT_INSMOD is not set # CONFIG_BUSYBOX_DEFAULT_LSMOD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set # CONFIG_BUSYBOX_DEFAULT_MODINFO is not set # CONFIG_BUSYBOX_DEFAULT_MODPROBE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MODPROBE_BLACKLIST is not set # CONFIG_BUSYBOX_DEFAULT_RMMOD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CMDLINE_MODULE_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_2_4_MODULES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_VERSION_CHECKING is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_LOADINKMEM is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_LOAD_MAP_FULL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHECK_TAINTED_MODULE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INSMOD_TRY_MMAP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MODUTILS_ALIAS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MODUTILS_SYMBOLS is not set CONFIG_BUSYBOX_DEFAULT_DEFAULT_MODULES_DIR="" CONFIG_BUSYBOX_DEFAULT_DEFAULT_DEPMOD_FILE="" # CONFIG_BUSYBOX_DEFAULT_ACPID is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_ACPID_COMPAT is not set # CONFIG_BUSYBOX_DEFAULT_BLKDISCARD is not set # CONFIG_BUSYBOX_DEFAULT_BLKID is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BLKID_TYPE is not set # CONFIG_BUSYBOX_DEFAULT_BLOCKDEV is not set # CONFIG_BUSYBOX_DEFAULT_CAL is not set # CONFIG_BUSYBOX_DEFAULT_CHRT is not set CONFIG_BUSYBOX_DEFAULT_DMESG=y CONFIG_BUSYBOX_DEFAULT_FEATURE_DMESG_PRETTY=y # CONFIG_BUSYBOX_DEFAULT_EJECT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_EJECT_SCSI is not set # CONFIG_BUSYBOX_DEFAULT_FALLOCATE is not set # CONFIG_BUSYBOX_DEFAULT_FATATTR is not set # CONFIG_BUSYBOX_DEFAULT_FBSET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FBSET_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE is not set # CONFIG_BUSYBOX_DEFAULT_FDFORMAT is not set # CONFIG_BUSYBOX_DEFAULT_FDISK is not set # CONFIG_BUSYBOX_DEFAULT_FDISK_SUPPORT_LARGE_DISKS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FDISK_WRITABLE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_AIX_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SGI_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SUN_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_OSF_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_GPT_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FDISK_ADVANCED is not set # CONFIG_BUSYBOX_DEFAULT_FINDFS is not set CONFIG_BUSYBOX_DEFAULT_FLOCK=y # CONFIG_BUSYBOX_DEFAULT_FDFLUSH is not set # CONFIG_BUSYBOX_DEFAULT_FREERAMDISK is not set # CONFIG_BUSYBOX_DEFAULT_FSCK_MINIX is not set # CONFIG_BUSYBOX_DEFAULT_FSFREEZE is not set # CONFIG_BUSYBOX_DEFAULT_FSTRIM is not set # CONFIG_BUSYBOX_DEFAULT_GETOPT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG is not set CONFIG_BUSYBOX_DEFAULT_HEXDUMP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_HEXDUMP_REVERSE is not set # CONFIG_BUSYBOX_DEFAULT_HD is not set # CONFIG_BUSYBOX_DEFAULT_XXD is not set CONFIG_BUSYBOX_DEFAULT_HWCLOCK=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS is not set # CONFIG_BUSYBOX_DEFAULT_IONICE is not set # CONFIG_BUSYBOX_DEFAULT_IPCRM is not set # CONFIG_BUSYBOX_DEFAULT_IPCS is not set # CONFIG_BUSYBOX_DEFAULT_LAST is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LAST_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_LOSETUP is not set # CONFIG_BUSYBOX_DEFAULT_LSPCI is not set # CONFIG_BUSYBOX_DEFAULT_LSUSB is not set # CONFIG_BUSYBOX_DEFAULT_MDEV is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MDEV_CONF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MDEV_RENAME_REGEXP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE is not set # CONFIG_BUSYBOX_DEFAULT_MESG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MESG_ENABLE_ONLY_GROUP is not set # CONFIG_BUSYBOX_DEFAULT_MKE2FS is not set # CONFIG_BUSYBOX_DEFAULT_MKFS_EXT2 is not set # CONFIG_BUSYBOX_DEFAULT_MKFS_MINIX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MINIX2 is not set # CONFIG_BUSYBOX_DEFAULT_MKFS_REISER is not set # CONFIG_BUSYBOX_DEFAULT_MKDOSFS is not set # CONFIG_BUSYBOX_DEFAULT_MKFS_VFAT is not set CONFIG_BUSYBOX_DEFAULT_MKSWAP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID is not set # CONFIG_BUSYBOX_DEFAULT_MORE is not set CONFIG_BUSYBOX_DEFAULT_MOUNT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB is not set # CONFIG_BUSYBOX_DEFAULT_MOUNTPOINT is not set # CONFIG_BUSYBOX_DEFAULT_NOLOGIN is not set # CONFIG_BUSYBOX_DEFAULT_NOLOGIN_DEPENDENCIES is not set # CONFIG_BUSYBOX_DEFAULT_NSENTER is not set CONFIG_BUSYBOX_DEFAULT_PIVOT_ROOT=y # CONFIG_BUSYBOX_DEFAULT_RDATE is not set # CONFIG_BUSYBOX_DEFAULT_RDEV is not set # CONFIG_BUSYBOX_DEFAULT_READPROFILE is not set # CONFIG_BUSYBOX_DEFAULT_RENICE is not set # CONFIG_BUSYBOX_DEFAULT_REV is not set # CONFIG_BUSYBOX_DEFAULT_RTCWAKE is not set # CONFIG_BUSYBOX_DEFAULT_SCRIPT is not set # CONFIG_BUSYBOX_DEFAULT_SCRIPTREPLAY is not set # CONFIG_BUSYBOX_DEFAULT_SETARCH is not set # CONFIG_BUSYBOX_DEFAULT_LINUX32 is not set # CONFIG_BUSYBOX_DEFAULT_LINUX64 is not set # CONFIG_BUSYBOX_DEFAULT_SETPRIV is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETPRIV_DUMP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITIES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITY_NAMES is not set # CONFIG_BUSYBOX_DEFAULT_SETSID is not set # CONFIG_BUSYBOX_DEFAULT_SWAPON is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SWAPON_DISCARD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SWAPON_PRI is not set # CONFIG_BUSYBOX_DEFAULT_SWAPOFF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SWAPONOFF_LABEL is not set CONFIG_BUSYBOX_DEFAULT_SWITCH_ROOT=y # CONFIG_BUSYBOX_DEFAULT_TASKSET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TASKSET_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_UEVENT is not set CONFIG_BUSYBOX_DEFAULT_UMOUNT=y CONFIG_BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL=y # CONFIG_BUSYBOX_DEFAULT_UNSHARE is not set # CONFIG_BUSYBOX_DEFAULT_WALL is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_MOUNT_LOOP_CREATE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MTAB_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_VOLUMEID is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BCACHE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_BTRFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_CRAMFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXFAT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_EXT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_F2FS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_FAT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_HFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ISO9660 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXSWAP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_MINIX is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NTFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_OCFS2 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_REISERFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_ROMFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SQUASHFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_SYSV is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UBIFS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_UDF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_VOLUMEID_XFS is not set # CONFIG_BUSYBOX_DEFAULT_ADJTIMEX is not set # CONFIG_BUSYBOX_DEFAULT_BBCONFIG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_COMPRESS_BBCONFIG is not set # CONFIG_BUSYBOX_DEFAULT_BC is not set # CONFIG_BUSYBOX_DEFAULT_DC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DC_BIG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DC_LIBM is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BC_INTERACTIVE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_BC_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_BEEP is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ=0 CONFIG_BUSYBOX_DEFAULT_FEATURE_BEEP_LENGTH_MS=0 # CONFIG_BUSYBOX_DEFAULT_CHAT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_NOFAIL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_TTY_HIFI is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_IMPLICIT_CR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_SWALLOW_OPTS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_SEND_ESCAPES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_VAR_ABORT_LEN is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CHAT_CLR_ABORT is not set # CONFIG_BUSYBOX_DEFAULT_CONSPY is not set CONFIG_BUSYBOX_DEFAULT_CROND=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_CROND_D is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_CROND_SPECIAL_TIMES is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_CROND_DIR="/etc" CONFIG_BUSYBOX_DEFAULT_CRONTAB=y # CONFIG_BUSYBOX_DEFAULT_DEVFSD is not set # CONFIG_BUSYBOX_DEFAULT_DEVFSD_MODLOAD is not set # CONFIG_BUSYBOX_DEFAULT_DEVFSD_FG_NP is not set # CONFIG_BUSYBOX_DEFAULT_DEVFSD_VERBOSE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_DEVFS is not set # CONFIG_BUSYBOX_DEFAULT_DEVMEM is not set # CONFIG_BUSYBOX_DEFAULT_FBSPLASH is not set # CONFIG_BUSYBOX_DEFAULT_FLASH_ERASEALL is not set # CONFIG_BUSYBOX_DEFAULT_FLASH_LOCK is not set # CONFIG_BUSYBOX_DEFAULT_FLASH_UNLOCK is not set # CONFIG_BUSYBOX_DEFAULT_FLASHCP is not set # CONFIG_BUSYBOX_DEFAULT_HDPARM is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_GET_IDENTITY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_GETSET_DMA is not set # CONFIG_BUSYBOX_DEFAULT_HEXEDIT is not set # CONFIG_BUSYBOX_DEFAULT_I2CGET is not set # CONFIG_BUSYBOX_DEFAULT_I2CSET is not set # CONFIG_BUSYBOX_DEFAULT_I2CDUMP is not set # CONFIG_BUSYBOX_DEFAULT_I2CDETECT is not set # CONFIG_BUSYBOX_DEFAULT_INOTIFYD is not set CONFIG_BUSYBOX_DEFAULT_LESS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_MAXLINES=9999999 # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_MARKS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_REGEXP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_WINCH is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_ASK_TERMINAL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_DASHCMD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_LINENUMS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_RAW is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LESS_ENV is not set CONFIG_BUSYBOX_DEFAULT_LOCK=y # CONFIG_BUSYBOX_DEFAULT_LSSCSI is not set # CONFIG_BUSYBOX_DEFAULT_MAKEDEVS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MAKEDEVS_LEAF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_MAKEDEVS_TABLE is not set # CONFIG_BUSYBOX_DEFAULT_MAN is not set # CONFIG_BUSYBOX_DEFAULT_MICROCOM is not set # CONFIG_BUSYBOX_DEFAULT_MT is not set # CONFIG_BUSYBOX_DEFAULT_NANDWRITE is not set # CONFIG_BUSYBOX_DEFAULT_NANDDUMP is not set # CONFIG_BUSYBOX_DEFAULT_PARTPROBE is not set # CONFIG_BUSYBOX_DEFAULT_RAIDAUTORUN is not set # CONFIG_BUSYBOX_DEFAULT_READAHEAD is not set # CONFIG_BUSYBOX_DEFAULT_RFKILL is not set # CONFIG_BUSYBOX_DEFAULT_RUNLEVEL is not set # CONFIG_BUSYBOX_DEFAULT_RX is not set # CONFIG_BUSYBOX_DEFAULT_SETFATTR is not set # CONFIG_BUSYBOX_DEFAULT_SETSERIAL is not set CONFIG_BUSYBOX_DEFAULT_STRINGS=y CONFIG_BUSYBOX_DEFAULT_TIME=y # CONFIG_BUSYBOX_DEFAULT_TTYSIZE is not set # CONFIG_BUSYBOX_DEFAULT_UBIATTACH is not set # CONFIG_BUSYBOX_DEFAULT_UBIDETACH is not set # CONFIG_BUSYBOX_DEFAULT_UBIMKVOL is not set # CONFIG_BUSYBOX_DEFAULT_UBIRMVOL is not set # CONFIG_BUSYBOX_DEFAULT_UBIRSVOL is not set # CONFIG_BUSYBOX_DEFAULT_UBIUPDATEVOL is not set # CONFIG_BUSYBOX_DEFAULT_UBIRENAME is not set # CONFIG_BUSYBOX_DEFAULT_VOLNAME is not set # CONFIG_BUSYBOX_DEFAULT_WATCHDOG is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_IPV6=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_UNIX_LOCAL is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_PREFER_IPV4_ADDRESS=y CONFIG_BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TLS_SHA1 is not set # CONFIG_BUSYBOX_DEFAULT_ARP is not set # CONFIG_BUSYBOX_DEFAULT_ARPING is not set CONFIG_BUSYBOX_DEFAULT_BRCTL=y CONFIG_BUSYBOX_DEFAULT_FEATURE_BRCTL_FANCY=y CONFIG_BUSYBOX_DEFAULT_FEATURE_BRCTL_SHOW=y # CONFIG_BUSYBOX_DEFAULT_DNSD is not set # CONFIG_BUSYBOX_DEFAULT_ETHER_WAKE is not set # CONFIG_BUSYBOX_DEFAULT_FTPD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION is not set # CONFIG_BUSYBOX_DEFAULT_FTPGET is not set # CONFIG_BUSYBOX_DEFAULT_FTPPUT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_HOSTNAME is not set # CONFIG_BUSYBOX_DEFAULT_DNSDOMAINNAME is not set # CONFIG_BUSYBOX_DEFAULT_HTTPD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_SETUID is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_CGI is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_ENCODE_URL_STR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_ERROR_PAGES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_PROXY is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_HTTPD_GZIP is not set CONFIG_BUSYBOX_DEFAULT_IFCONFIG=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_STATUS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_SLIP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_HW=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IFCONFIG_BROADCAST_PLUS=y # CONFIG_BUSYBOX_DEFAULT_IFENSLAVE is not set # CONFIG_BUSYBOX_DEFAULT_IFPLUGD is not set # CONFIG_BUSYBOX_DEFAULT_IFUP is not set # CONFIG_BUSYBOX_DEFAULT_IFDOWN is not set CONFIG_BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH="" # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set # CONFIG_BUSYBOX_DEFAULT_INETD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_INETD_RPC is not set CONFIG_BUSYBOX_DEFAULT_IP=y # CONFIG_BUSYBOX_DEFAULT_IPADDR is not set # CONFIG_BUSYBOX_DEFAULT_IPLINK is not set # CONFIG_BUSYBOX_DEFAULT_IPROUTE is not set # CONFIG_BUSYBOX_DEFAULT_IPTUNNEL is not set # CONFIG_BUSYBOX_DEFAULT_IPRULE is not set # CONFIG_BUSYBOX_DEFAULT_IPNEIGH is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_LINK=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ROUTE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR="/etc/iproute2" # CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_RULE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_NEIGH=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS is not set # CONFIG_BUSYBOX_DEFAULT_IPCALC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IPCALC_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_IPCALC_FANCY is not set # CONFIG_BUSYBOX_DEFAULT_FAKEIDENTD is not set # CONFIG_BUSYBOX_DEFAULT_NAMEIF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED is not set # CONFIG_BUSYBOX_DEFAULT_NBDCLIENT is not set CONFIG_BUSYBOX_DEFAULT_NC=y # CONFIG_BUSYBOX_DEFAULT_NETCAT is not set # CONFIG_BUSYBOX_DEFAULT_NC_SERVER is not set # CONFIG_BUSYBOX_DEFAULT_NC_EXTRA is not set # CONFIG_BUSYBOX_DEFAULT_NC_110_COMPAT is not set CONFIG_BUSYBOX_DEFAULT_NETMSG=y CONFIG_BUSYBOX_DEFAULT_NETSTAT=y CONFIG_BUSYBOX_DEFAULT_FEATURE_NETSTAT_WIDE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_NETSTAT_PRG=y # CONFIG_BUSYBOX_DEFAULT_NSLOOKUP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_BIG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS is not set CONFIG_BUSYBOX_DEFAULT_NTPD=y CONFIG_BUSYBOX_DEFAULT_FEATURE_NTPD_SERVER=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_NTPD_CONF is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_NTP_AUTH is not set CONFIG_BUSYBOX_DEFAULT_PING=y CONFIG_BUSYBOX_DEFAULT_PING6=y CONFIG_BUSYBOX_DEFAULT_FEATURE_FANCY_PING=y # CONFIG_BUSYBOX_DEFAULT_PSCAN is not set CONFIG_BUSYBOX_DEFAULT_ROUTE=y # CONFIG_BUSYBOX_DEFAULT_SLATTACH is not set # CONFIG_BUSYBOX_DEFAULT_SSL_CLIENT is not set # CONFIG_BUSYBOX_DEFAULT_TC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TC_INGRESS is not set # CONFIG_BUSYBOX_DEFAULT_TCPSVD is not set # CONFIG_BUSYBOX_DEFAULT_UDPSVD is not set # CONFIG_BUSYBOX_DEFAULT_TELNET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TELNET_TTYPE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TELNET_AUTOLOGIN is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH is not set # CONFIG_BUSYBOX_DEFAULT_TELNETD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT is not set # CONFIG_BUSYBOX_DEFAULT_TFTP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR is not set # CONFIG_BUSYBOX_DEFAULT_TFTPD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TFTP_GET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TFTP_PUT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TFTP_BLOCKSIZE is not set # CONFIG_BUSYBOX_DEFAULT_TFTP_DEBUG is not set # CONFIG_BUSYBOX_DEFAULT_TLS is not set CONFIG_BUSYBOX_DEFAULT_TRACEROUTE=y CONFIG_BUSYBOX_DEFAULT_TRACEROUTE6=y CONFIG_BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP is not set # CONFIG_BUSYBOX_DEFAULT_TUNCTL is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TUNCTL_UG is not set # CONFIG_BUSYBOX_DEFAULT_VCONFIG is not set # CONFIG_BUSYBOX_DEFAULT_WGET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_HTTPS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL is not set # CONFIG_BUSYBOX_DEFAULT_WHOIS is not set # CONFIG_BUSYBOX_DEFAULT_ZCIP is not set # CONFIG_BUSYBOX_DEFAULT_UDHCPD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set CONFIG_BUSYBOX_DEFAULT_DHCPD_LEASES_FILE="" # CONFIG_BUSYBOX_DEFAULT_DUMPLEASES is not set # CONFIG_BUSYBOX_DEFAULT_DHCPRELAY is not set CONFIG_BUSYBOX_DEFAULT_UDHCPC=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC_ARPING is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC_SANITIZEOPT is not set CONFIG_BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" # CONFIG_BUSYBOX_DEFAULT_UDHCPC6 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC5970 is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT is not set CONFIG_BUSYBOX_DEFAULT_UDHCP_DEBUG=0 CONFIG_BUSYBOX_DEFAULT_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80 CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q is not set CONFIG_BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS="" # CONFIG_BUSYBOX_DEFAULT_LPD is not set # CONFIG_BUSYBOX_DEFAULT_LPR is not set # CONFIG_BUSYBOX_DEFAULT_LPQ is not set # CONFIG_BUSYBOX_DEFAULT_MAKEMIME is not set # CONFIG_BUSYBOX_DEFAULT_POPMAILDIR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_POPMAILDIR_DELIVERY is not set # CONFIG_BUSYBOX_DEFAULT_REFORMIME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_REFORMIME_COMPAT is not set # CONFIG_BUSYBOX_DEFAULT_SENDMAIL is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET="" CONFIG_BUSYBOX_DEFAULT_FREE=y # CONFIG_BUSYBOX_DEFAULT_FUSER is not set # CONFIG_BUSYBOX_DEFAULT_IOSTAT is not set CONFIG_BUSYBOX_DEFAULT_KILL=y CONFIG_BUSYBOX_DEFAULT_KILLALL=y # CONFIG_BUSYBOX_DEFAULT_KILLALL5 is not set # CONFIG_BUSYBOX_DEFAULT_LSOF is not set # CONFIG_BUSYBOX_DEFAULT_MPSTAT is not set # CONFIG_BUSYBOX_DEFAULT_NMETER is not set CONFIG_BUSYBOX_DEFAULT_PGREP=y # CONFIG_BUSYBOX_DEFAULT_PKILL is not set CONFIG_BUSYBOX_DEFAULT_PIDOF=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_PIDOF_SINGLE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_PIDOF_OMIT is not set # CONFIG_BUSYBOX_DEFAULT_PMAP is not set # CONFIG_BUSYBOX_DEFAULT_POWERTOP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_POWERTOP_INTERACTIVE is not set CONFIG_BUSYBOX_DEFAULT_PS=y CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_WIDE=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_LONG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_TIME is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_UNUSUAL_SYSTEMS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_PS_ADDITIONAL_COLUMNS is not set # CONFIG_BUSYBOX_DEFAULT_PSTREE is not set # CONFIG_BUSYBOX_DEFAULT_PWDX is not set # CONFIG_BUSYBOX_DEFAULT_SMEMCAP is not set CONFIG_BUSYBOX_DEFAULT_BB_SYSCTL=y CONFIG_BUSYBOX_DEFAULT_TOP=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_INTERACTIVE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_SMP_CPU is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_DECIMALS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOP_SMP_PROCESS is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_TOPMEM is not set CONFIG_BUSYBOX_DEFAULT_UPTIME=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_UPTIME_UTMP_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_WATCH is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS is not set # CONFIG_BUSYBOX_DEFAULT_CHPST is not set # CONFIG_BUSYBOX_DEFAULT_SETUIDGID is not set # CONFIG_BUSYBOX_DEFAULT_ENVUIDGID is not set # CONFIG_BUSYBOX_DEFAULT_ENVDIR is not set # CONFIG_BUSYBOX_DEFAULT_SOFTLIMIT is not set # CONFIG_BUSYBOX_DEFAULT_RUNSV is not set # CONFIG_BUSYBOX_DEFAULT_RUNSVDIR is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_RUNSVDIR_LOG is not set # CONFIG_BUSYBOX_DEFAULT_SV is not set CONFIG_BUSYBOX_DEFAULT_SV_DEFAULT_SERVICE_DIR="" # CONFIG_BUSYBOX_DEFAULT_SVC is not set # CONFIG_BUSYBOX_DEFAULT_SVOK is not set # CONFIG_BUSYBOX_DEFAULT_SVLOGD is not set # CONFIG_BUSYBOX_DEFAULT_CHCON is not set # CONFIG_BUSYBOX_DEFAULT_GETENFORCE is not set # CONFIG_BUSYBOX_DEFAULT_GETSEBOOL is not set # CONFIG_BUSYBOX_DEFAULT_LOAD_POLICY is not set # CONFIG_BUSYBOX_DEFAULT_MATCHPATHCON is not set # CONFIG_BUSYBOX_DEFAULT_RUNCON is not set # CONFIG_BUSYBOX_DEFAULT_SELINUXENABLED is not set # CONFIG_BUSYBOX_DEFAULT_SESTATUS is not set # CONFIG_BUSYBOX_DEFAULT_SETENFORCE is not set # CONFIG_BUSYBOX_DEFAULT_SETFILES is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SETFILES_CHECK_OPTION is not set # CONFIG_BUSYBOX_DEFAULT_RESTORECON is not set # CONFIG_BUSYBOX_DEFAULT_SETSEBOOL is not set CONFIG_BUSYBOX_DEFAULT_SH_IS_ASH=y # CONFIG_BUSYBOX_DEFAULT_SH_IS_HUSH is not set # CONFIG_BUSYBOX_DEFAULT_SH_IS_NONE is not set # CONFIG_BUSYBOX_DEFAULT_BASH_IS_ASH is not set # CONFIG_BUSYBOX_DEFAULT_BASH_IS_HUSH is not set CONFIG_BUSYBOX_DEFAULT_BASH_IS_NONE=y CONFIG_BUSYBOX_DEFAULT_ASH=y # CONFIG_BUSYBOX_DEFAULT_ASH_OPTIMIZE_FOR_SIZE is not set CONFIG_BUSYBOX_DEFAULT_ASH_INTERNAL_GLOB=y CONFIG_BUSYBOX_DEFAULT_ASH_BASH_COMPAT=y # CONFIG_BUSYBOX_DEFAULT_ASH_BASH_SOURCE_CURDIR is not set # CONFIG_BUSYBOX_DEFAULT_ASH_BASH_NOT_FOUND_HOOK is not set CONFIG_BUSYBOX_DEFAULT_ASH_JOB_CONTROL=y CONFIG_BUSYBOX_DEFAULT_ASH_ALIAS=y # CONFIG_BUSYBOX_DEFAULT_ASH_RANDOM_SUPPORT is not set CONFIG_BUSYBOX_DEFAULT_ASH_EXPAND_PRMT=y # CONFIG_BUSYBOX_DEFAULT_ASH_IDLE_TIMEOUT is not set # CONFIG_BUSYBOX_DEFAULT_ASH_MAIL is not set CONFIG_BUSYBOX_DEFAULT_ASH_ECHO=y CONFIG_BUSYBOX_DEFAULT_ASH_PRINTF=y CONFIG_BUSYBOX_DEFAULT_ASH_TEST=y # CONFIG_BUSYBOX_DEFAULT_ASH_HELP is not set CONFIG_BUSYBOX_DEFAULT_ASH_GETOPTS=y CONFIG_BUSYBOX_DEFAULT_ASH_CMDCMD=y # CONFIG_BUSYBOX_DEFAULT_CTTYHACK is not set # CONFIG_BUSYBOX_DEFAULT_HUSH is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_BASH_COMPAT is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_BRACE_EXPANSION is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_LINENO_VAR is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_BASH_SOURCE_CURDIR is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_INTERACTIVE is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_SAVEHISTORY is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_JOB is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_TICK is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_IF is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_LOOPS is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_CASE is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_FUNCTIONS is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_LOCAL is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_RANDOM_SUPPORT is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_MODE_X is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_ECHO is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_PRINTF is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_TEST is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_HELP is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_EXPORT is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_EXPORT_N is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_READONLY is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_KILL is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_WAIT is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_COMMAND is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_TRAP is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_TYPE is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_TIMES is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_READ is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_SET is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_UNSET is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_ULIMIT is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_UMASK is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_GETOPTS is not set # CONFIG_BUSYBOX_DEFAULT_HUSH_MEMLEAK is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_MATH=y CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_MATH_64=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_EXTRA_QUIET is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_STANDALONE is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_NOFORK=y # CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_READ_FRAC is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_HISTFILESIZE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SH_EMBEDDED_SCRIPTS is not set # CONFIG_BUSYBOX_DEFAULT_KLOGD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_KLOGD_KLOGCTL is not set CONFIG_BUSYBOX_DEFAULT_LOGGER=y # CONFIG_BUSYBOX_DEFAULT_LOGREAD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_LOGREAD_REDUCED_LOCKING is not set # CONFIG_BUSYBOX_DEFAULT_SYSLOGD is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_ROTATE_LOGFILE is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_REMOTE_LOG is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOGD_DUP is not set # CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOGD_CFG is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0 # CONFIG_BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG is not set CONFIG_BUSYBOX_DEFAULT_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0 # CONFIG_BUSYBOX_DEFAULT_FEATURE_KMSG_SYSLOG is not set # CONFIG_PACKAGE_ca-bundle is not set CONFIG_PACKAGE_ca-certificates=y # CONFIG_PACKAGE_dnsmasq is not set # CONFIG_PACKAGE_dnsmasq-dhcpv6 is not set CONFIG_PACKAGE_dnsmasq-full=y CONFIG_PACKAGE_dnsmasq_full_dhcp=y # CONFIG_PACKAGE_dnsmasq_full_dhcpv6 is not set # CONFIG_PACKAGE_dnsmasq_full_dnssec is not set # CONFIG_PACKAGE_dnsmasq_full_auth is not set CONFIG_PACKAGE_dnsmasq_full_ipset=y # CONFIG_PACKAGE_dnsmasq_full_conntrack is not set # CONFIG_PACKAGE_dnsmasq_full_noid is not set # CONFIG_PACKAGE_dnsmasq_full_broken_rtc is not set CONFIG_PACKAGE_dropbear=y # # Configuration # CONFIG_DROPBEAR_CURVE25519=y # CONFIG_DROPBEAR_ECC is not set # CONFIG_DROPBEAR_ZLIB is not set CONFIG_DROPBEAR_DBCLIENT=y # CONFIG_PACKAGE_ead is not set CONFIG_PACKAGE_firewall=y CONFIG_PACKAGE_fstools=y # CONFIG_FSTOOLS_OVL_MOUNT_FULL_ACCESS_TIME is not set # CONFIG_FSTOOLS_OVL_MOUNT_COMPRESS_ZLIB is not set CONFIG_PACKAGE_fwtool=y CONFIG_PACKAGE_getrandom=y CONFIG_PACKAGE_jsonfilter=y # CONFIG_PACKAGE_libatomic is not set CONFIG_PACKAGE_libc=y CONFIG_PACKAGE_libgcc=y # CONFIG_PACKAGE_libgomp is not set CONFIG_PACKAGE_libpthread=y CONFIG_PACKAGE_librt=y # CONFIG_PACKAGE_libstdcpp is not set CONFIG_PACKAGE_logd=y CONFIG_PACKAGE_mtd=y CONFIG_PACKAGE_netifd=y # CONFIG_PACKAGE_nft-qos is not set # CONFIG_PACKAGE_nvram is not set # CONFIG_PACKAGE_om-watchdog is not set # CONFIG_PACKAGE_openwrt-keyring is not set CONFIG_PACKAGE_opkg=y CONFIG_PACKAGE_procd=y # # Configuration # # CONFIG_PROCD_SHOW_BOOT is not set # CONFIG_PROCD_ZRAM_TMPFS is not set # CONFIG_PACKAGE_procd-ujail is not set # CONFIG_PACKAGE_qos-scripts is not set # CONFIG_PACKAGE_resolveip is not set CONFIG_PACKAGE_rpcd=y # CONFIG_PACKAGE_rpcd-mod-file is not set # CONFIG_PACKAGE_rpcd-mod-iwinfo is not set # CONFIG_PACKAGE_rpcd-mod-rpcsys is not set # CONFIG_PACKAGE_snapshot-tool is not set # CONFIG_PACKAGE_sqm-scripts is not set # CONFIG_PACKAGE_sqm-scripts-extra is not set CONFIG_PACKAGE_swconfig=y CONFIG_PACKAGE_ubox=y CONFIG_PACKAGE_ubus=y CONFIG_PACKAGE_ubusd=y # CONFIG_PACKAGE_ucert is not set # CONFIG_PACKAGE_ucert-full is not set CONFIG_PACKAGE_uci=y CONFIG_PACKAGE_urandom-seed=y CONFIG_PACKAGE_urngd=y # CONFIG_PACKAGE_usign is not set # CONFIG_PACKAGE_wireless-tools is not set # CONFIG_PACKAGE_zram-swap is not set # # Administration # # # openwisp # # CONFIG_PACKAGE_openwisp-config-cyassl is not set # CONFIG_PACKAGE_openwisp-config-mbedtls is not set # CONFIG_PACKAGE_openwisp-config-nossl is not set # CONFIG_PACKAGE_openwisp-config-openssl is not set # # zabbix # # CONFIG_PACKAGE_zabbix-agentd is not set # CONFIG_PACKAGE_zabbix-extra-mac80211 is not set # CONFIG_PACKAGE_zabbix-extra-network is not set # CONFIG_PACKAGE_zabbix-extra-wifi is not set # CONFIG_PACKAGE_zabbix-get is not set # CONFIG_PACKAGE_zabbix-proxy is not set # CONFIG_PACKAGE_zabbix-sender is not set # CONFIG_PACKAGE_zabbix-server is not set # CONFIG_PACKAGE_htop is not set # CONFIG_PACKAGE_ipmitool is not set # CONFIG_PACKAGE_monit is not set # CONFIG_PACKAGE_monit-nossl is not set # CONFIG_PACKAGE_muninlite is not set # CONFIG_PACKAGE_netdata is not set # CONFIG_PACKAGE_sudo is not set # CONFIG_PACKAGE_syslog-ng is not set # # Boot Loaders # # # Development # # # Libraries # # CONFIG_PACKAGE_libncurses-dev is not set # CONFIG_PACKAGE_libxml2-dev is not set # CONFIG_PACKAGE_zlib-dev is not set # CONFIG_PACKAGE_ar is not set # CONFIG_PACKAGE_autoconf is not set # CONFIG_PACKAGE_automake is not set # CONFIG_PACKAGE_binutils is not set # CONFIG_PACKAGE_diffutils is not set # CONFIG_PACKAGE_gcc is not set # CONFIG_PACKAGE_gdb is not set # CONFIG_PACKAGE_gdbserver is not set # CONFIG_PACKAGE_libtool-bin is not set # CONFIG_PACKAGE_lpc21isp is not set # CONFIG_PACKAGE_lttng-tools is not set # CONFIG_PACKAGE_m4 is not set # CONFIG_PACKAGE_make is not set # CONFIG_PACKAGE_meson is not set # CONFIG_PACKAGE_meson-src is not set # CONFIG_PACKAGE_ninja is not set # CONFIG_PACKAGE_objdump is not set # CONFIG_PACKAGE_patch is not set # CONFIG_PACKAGE_pkg-config is not set # CONFIG_PACKAGE_trace-cmd is not set # CONFIG_PACKAGE_trace-cmd-extra is not set # CONFIG_PACKAGE_valgrind is not set # # Extra packages # # CONFIG_PACKAGE_automount is not set # CONFIG_PACKAGE_autosamba is not set # CONFIG_PACKAGE_ipv6helper is not set # CONFIG_PACKAGE_k3wifi is not set # CONFIG_PACKAGE_wireguard-tools is not set # # Firmware # # # ath10k IPQ4019 Boarddata # # CONFIG_PACKAGE_aircard-pcmcia-firmware is not set # CONFIG_PACKAGE_amdgpu-firmware is not set # CONFIG_PACKAGE_ar3k-firmware is not set # CONFIG_PACKAGE_ath10k-firmware-qca4019 is not set # CONFIG_PACKAGE_ath10k-firmware-qca4019-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca4019-ct-htt is not set # CONFIG_PACKAGE_ath10k-firmware-qca6174 is not set # CONFIG_PACKAGE_ath10k-firmware-qca9887 is not set # CONFIG_PACKAGE_ath10k-firmware-qca9887-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca9887-ct-htt is not set # CONFIG_PACKAGE_ath10k-firmware-qca9888 is not set # CONFIG_PACKAGE_ath10k-firmware-qca9888-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca9888-ct-htt is not set CONFIG_PACKAGE_ath10k-firmware-qca988x=y # CONFIG_PACKAGE_ath10k-firmware-qca988x-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca988x-ct-htt is not set # CONFIG_PACKAGE_ath10k-firmware-qca9984 is not set # CONFIG_PACKAGE_ath10k-firmware-qca9984-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca9984-ct-htt is not set # CONFIG_PACKAGE_ath10k-firmware-qca99x0 is not set # CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct is not set # CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct-htt is not set # CONFIG_PACKAGE_ath6k-firmware is not set # CONFIG_PACKAGE_ath9k-htc-firmware is not set # CONFIG_PACKAGE_b43legacy-firmware is not set # CONFIG_PACKAGE_bnx2-firmware is not set # CONFIG_PACKAGE_bnx2x-firmware is not set # CONFIG_PACKAGE_brcmfmac-firmware-4329-sdio is not set # CONFIG_PACKAGE_brcmfmac-firmware-43362-sdio is not set # CONFIG_PACKAGE_brcmfmac-firmware-43430-sdio is not set # CONFIG_PACKAGE_brcmfmac-firmware-43430-sdio-rpi-3b is not set # CONFIG_PACKAGE_brcmfmac-firmware-43430-sdio-rpi-zero-w is not set # CONFIG_PACKAGE_brcmfmac-firmware-43430a0-sdio is not set # CONFIG_PACKAGE_brcmfmac-firmware-43455-sdio is not set # CONFIG_PACKAGE_brcmfmac-firmware-43455-sdio-rpi-3b-plus is not set # CONFIG_PACKAGE_brcmfmac-firmware-43455-sdio-rpi-4b is not set # CONFIG_PACKAGE_brcmfmac-firmware-43602a1-pcie is not set # CONFIG_PACKAGE_brcmfmac-firmware-4366b1-pcie is not set # CONFIG_PACKAGE_brcmfmac-firmware-4366c0-pcie is not set # CONFIG_PACKAGE_brcmfmac-firmware-usb is not set # CONFIG_PACKAGE_brcmsmac-firmware is not set # CONFIG_PACKAGE_carl9170-firmware is not set # CONFIG_PACKAGE_cypress-firmware-43012-sdio is not set # CONFIG_PACKAGE_cypress-firmware-43340-sdio is not set # CONFIG_PACKAGE_cypress-firmware-43362-sdio is not set # CONFIG_PACKAGE_cypress-firmware-4339-sdio is not set # CONFIG_PACKAGE_cypress-firmware-43430-sdio is not set # CONFIG_PACKAGE_cypress-firmware-43455-sdio is not set # CONFIG_PACKAGE_cypress-firmware-4354-sdio is not set # CONFIG_PACKAGE_cypress-firmware-4356-pcie is not set # CONFIG_PACKAGE_cypress-firmware-4356-sdio is not set # CONFIG_PACKAGE_cypress-firmware-43570-pcie is not set # CONFIG_PACKAGE_cypress-firmware-4359-pcie is not set # CONFIG_PACKAGE_cypress-firmware-4359-sdio is not set # CONFIG_PACKAGE_cypress-firmware-4373-sdio is not set # CONFIG_PACKAGE_cypress-firmware-4373-usb is not set # CONFIG_PACKAGE_cypress-firmware-89459-pcie is not set # CONFIG_PACKAGE_e100-firmware is not set # CONFIG_PACKAGE_edgeport-firmware is not set # CONFIG_PACKAGE_ibt-firmware is not set # CONFIG_PACKAGE_iwl3945-firmware is not set # CONFIG_PACKAGE_iwl4965-firmware is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl100 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl1000 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl105 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl135 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl2000 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl2030 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl3160 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl3168 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl5000 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl5150 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl6000g2 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl6000g2a is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl6000g2b is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl6050 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl7260 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl7265 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl7265d is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl8260c is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl8265 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl9000 is not set # CONFIG_PACKAGE_iwlwifi-firmware-iwl9260 is not set # CONFIG_PACKAGE_libertas-sdio-firmware is not set # CONFIG_PACKAGE_libertas-spi-firmware is not set # CONFIG_PACKAGE_libertas-usb-firmware is not set # CONFIG_PACKAGE_mt7601u-firmware is not set # CONFIG_PACKAGE_mt7622bt-firmware is not set # CONFIG_PACKAGE_mwifiex-pcie-firmware is not set # CONFIG_PACKAGE_mwifiex-sdio-firmware is not set # CONFIG_PACKAGE_mwl8k-firmware is not set # CONFIG_PACKAGE_p54-pci-firmware is not set # CONFIG_PACKAGE_p54-spi-firmware is not set # CONFIG_PACKAGE_p54-usb-firmware is not set # CONFIG_PACKAGE_prism54-firmware is not set # CONFIG_PACKAGE_r8169-firmware is not set # CONFIG_PACKAGE_radeon-firmware is not set # CONFIG_PACKAGE_rs9113-firmware is not set # CONFIG_PACKAGE_rt2800-pci-firmware is not set # CONFIG_PACKAGE_rt2800-usb-firmware is not set # CONFIG_PACKAGE_rt61-pci-firmware is not set # CONFIG_PACKAGE_rt73-usb-firmware is not set # CONFIG_PACKAGE_rtl8188eu-firmware is not set # CONFIG_PACKAGE_rtl8192ce-firmware is not set # CONFIG_PACKAGE_rtl8192cu-firmware is not set # CONFIG_PACKAGE_rtl8192de-firmware is not set # CONFIG_PACKAGE_rtl8192eu-firmware is not set # CONFIG_PACKAGE_rtl8192se-firmware is not set # CONFIG_PACKAGE_rtl8192su-firmware is not set # CONFIG_PACKAGE_rtl8723au-firmware is not set # CONFIG_PACKAGE_rtl8723bs-firmware is not set # CONFIG_PACKAGE_rtl8723bu-firmware is not set # CONFIG_PACKAGE_rtl8821ae-firmware is not set # CONFIG_PACKAGE_rtl8822be-firmware is not set # CONFIG_PACKAGE_rtl8822ce-firmware is not set # CONFIG_PACKAGE_ti-3410-firmware is not set # CONFIG_PACKAGE_ti-5052-firmware is not set CONFIG_PACKAGE_wireless-regdb=y # CONFIG_PACKAGE_wl12xx-firmware is not set # CONFIG_PACKAGE_wl18xx-firmware is not set # # Fonts # # # DejaVu # # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuMathTeXGyre is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSans is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSans-Bold is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSans-BoldOblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSans-ExtraLight is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSans-Oblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansCondensed is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansCondensed-Bold is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansCondensed-BoldOblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansCondensed-Oblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansMono is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansMono-Bold is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansMono-BoldOblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSansMono-Oblique is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerif is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerif-Bold is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerif-BoldItalic is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerif-Italic is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerifCondensed is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerifCondensed-Bold is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerifCondensed-BoldItalic is not set # CONFIG_PACKAGE_dejavu-fonts-ttf-DejaVuSerifCondensed-Italic is not set # # Kernel modules # # # Block Devices # # CONFIG_PACKAGE_kmod-aoe is not set # CONFIG_PACKAGE_kmod-ata-core is not set # CONFIG_PACKAGE_kmod-block2mtd is not set # CONFIG_PACKAGE_kmod-dm is not set # CONFIG_PACKAGE_kmod-dm-raid is not set # CONFIG_PACKAGE_kmod-loop is not set # CONFIG_PACKAGE_kmod-md-mod is not set # CONFIG_PACKAGE_kmod-nbd is not set # CONFIG_PACKAGE_kmod-scsi-cdrom is not set # CONFIG_PACKAGE_kmod-scsi-core is not set # CONFIG_PACKAGE_kmod-scsi-generic is not set # CONFIG_PACKAGE_kmod-scsi-tape is not set # # CAN Support # # CONFIG_PACKAGE_kmod-can is not set # # Cryptographic API modules # CONFIG_PACKAGE_kmod-crypto-aead=y CONFIG_PACKAGE_kmod-crypto-arc4=y CONFIG_PACKAGE_kmod-crypto-authenc=y # CONFIG_PACKAGE_kmod-crypto-cbc is not set # CONFIG_PACKAGE_kmod-crypto-ccm is not set # CONFIG_PACKAGE_kmod-crypto-cmac is not set CONFIG_PACKAGE_kmod-crypto-crc32c=y # CONFIG_PACKAGE_kmod-crypto-ctr is not set # CONFIG_PACKAGE_kmod-crypto-cts is not set # CONFIG_PACKAGE_kmod-crypto-deflate is not set # CONFIG_PACKAGE_kmod-crypto-des is not set CONFIG_PACKAGE_kmod-crypto-ecb=y # CONFIG_PACKAGE_kmod-crypto-ecdh is not set # CONFIG_PACKAGE_kmod-crypto-echainiv is not set # CONFIG_PACKAGE_kmod-crypto-fcrypt is not set # CONFIG_PACKAGE_kmod-crypto-gcm is not set # CONFIG_PACKAGE_kmod-crypto-gf128 is not set # CONFIG_PACKAGE_kmod-crypto-ghash is not set CONFIG_PACKAGE_kmod-crypto-hash=y # CONFIG_PACKAGE_kmod-crypto-hmac is not set # CONFIG_PACKAGE_kmod-crypto-hw-ccp is not set # CONFIG_PACKAGE_kmod-crypto-hw-geode is not set # CONFIG_PACKAGE_kmod-crypto-hw-hifn-795x is not set # CONFIG_PACKAGE_kmod-crypto-hw-padlock is not set # CONFIG_PACKAGE_kmod-crypto-hw-talitos is not set CONFIG_PACKAGE_kmod-crypto-manager=y # CONFIG_PACKAGE_kmod-crypto-md4 is not set # CONFIG_PACKAGE_kmod-crypto-md5 is not set # CONFIG_PACKAGE_kmod-crypto-michael-mic is not set # CONFIG_PACKAGE_kmod-crypto-misc is not set CONFIG_PACKAGE_kmod-crypto-null=y # CONFIG_PACKAGE_kmod-crypto-pcbc is not set CONFIG_PACKAGE_kmod-crypto-pcompress=y # CONFIG_PACKAGE_kmod-crypto-rmd160 is not set # CONFIG_PACKAGE_kmod-crypto-rng is not set # CONFIG_PACKAGE_kmod-crypto-seqiv is not set CONFIG_PACKAGE_kmod-crypto-sha1=y # CONFIG_PACKAGE_kmod-crypto-sha256 is not set # CONFIG_PACKAGE_kmod-crypto-sha512 is not set # CONFIG_PACKAGE_kmod-crypto-test is not set # CONFIG_PACKAGE_kmod-crypto-user is not set # CONFIG_PACKAGE_kmod-crypto-wq is not set # CONFIG_PACKAGE_kmod-crypto-xcbc is not set # CONFIG_PACKAGE_kmod-crypto-xts is not set CONFIG_PACKAGE_kmod-cryptodev=y # # Filesystems # # CONFIG_PACKAGE_kmod-fs-afs is not set # CONFIG_PACKAGE_kmod-fs-antfs is not set # CONFIG_PACKAGE_kmod-fs-autofs4 is not set # CONFIG_PACKAGE_kmod-fs-btrfs is not set # CONFIG_PACKAGE_kmod-fs-cifs is not set # CONFIG_PACKAGE_kmod-fs-configfs is not set # CONFIG_PACKAGE_kmod-fs-cramfs is not set # CONFIG_PACKAGE_kmod-fs-exfat is not set # CONFIG_PACKAGE_kmod-fs-exportfs is not set # CONFIG_PACKAGE_kmod-fs-ext4 is not set # CONFIG_PACKAGE_kmod-fs-f2fs is not set # CONFIG_PACKAGE_kmod-fs-fscache is not set # CONFIG_PACKAGE_kmod-fs-hfs is not set # CONFIG_PACKAGE_kmod-fs-hfsplus is not set # CONFIG_PACKAGE_kmod-fs-isofs is not set # CONFIG_PACKAGE_kmod-fs-jfs is not set # CONFIG_PACKAGE_kmod-fs-ksmbd is not set # CONFIG_PACKAGE_kmod-fs-minix is not set # CONFIG_PACKAGE_kmod-fs-msdos is not set # CONFIG_PACKAGE_kmod-fs-nfs is not set # CONFIG_PACKAGE_kmod-fs-nfs-common is not set # CONFIG_PACKAGE_kmod-fs-nfs-common-rpcsec is not set # CONFIG_PACKAGE_kmod-fs-nfs-v3 is not set # CONFIG_PACKAGE_kmod-fs-nfs-v4 is not set # CONFIG_PACKAGE_kmod-fs-nfsd is not set # CONFIG_PACKAGE_kmod-fs-ntfs is not set # CONFIG_PACKAGE_kmod-fs-reiserfs is not set # CONFIG_PACKAGE_kmod-fs-squashfs is not set # CONFIG_PACKAGE_kmod-fs-udf is not set # CONFIG_PACKAGE_kmod-fs-vfat is not set # CONFIG_PACKAGE_kmod-fs-xfs is not set # CONFIG_PACKAGE_kmod-fuse is not set # # FireWire support # # CONFIG_PACKAGE_kmod-firewire is not set # # Hardware Monitoring Support # CONFIG_PACKAGE_kmod-hwmon-core=y # CONFIG_PACKAGE_kmod-hwmon-adcxx is not set # CONFIG_PACKAGE_kmod-hwmon-ads1015 is not set # CONFIG_PACKAGE_kmod-hwmon-adt7410 is not set # CONFIG_PACKAGE_kmod-hwmon-adt7475 is not set # CONFIG_PACKAGE_kmod-hwmon-gpiofan is not set # CONFIG_PACKAGE_kmod-hwmon-ina209 is not set # CONFIG_PACKAGE_kmod-hwmon-ina2xx is not set # CONFIG_PACKAGE_kmod-hwmon-it87 is not set # CONFIG_PACKAGE_kmod-hwmon-lm63 is not set # CONFIG_PACKAGE_kmod-hwmon-lm75 is not set # CONFIG_PACKAGE_kmod-hwmon-lm77 is not set # CONFIG_PACKAGE_kmod-hwmon-lm85 is not set # CONFIG_PACKAGE_kmod-hwmon-lm90 is not set # CONFIG_PACKAGE_kmod-hwmon-lm92 is not set # CONFIG_PACKAGE_kmod-hwmon-lm95241 is not set # CONFIG_PACKAGE_kmod-hwmon-ltc4151 is not set # CONFIG_PACKAGE_kmod-hwmon-mcp3021 is not set # CONFIG_PACKAGE_kmod-hwmon-pwmfan is not set # CONFIG_PACKAGE_kmod-hwmon-sch5627 is not set # CONFIG_PACKAGE_kmod-hwmon-sht21 is not set # CONFIG_PACKAGE_kmod-hwmon-tmp102 is not set # CONFIG_PACKAGE_kmod-hwmon-tmp103 is not set # CONFIG_PACKAGE_kmod-hwmon-tmp421 is not set # CONFIG_PACKAGE_kmod-hwmon-vid is not set # CONFIG_PACKAGE_kmod-hwmon-w83793 is not set # CONFIG_PACKAGE_kmod-pmbus-core is not set # CONFIG_PACKAGE_kmod-pmbus-zl6100 is not set # # I2C support # # CONFIG_PACKAGE_kmod-i2c-core is not set # CONFIG_PACKAGE_kmod-i2c-gpio-custom is not set # # Industrial I/O Modules # # CONFIG_PACKAGE_kmod-iio-ad799x is not set # CONFIG_PACKAGE_kmod-iio-am2315 is not set # CONFIG_PACKAGE_kmod-iio-bh1750 is not set # CONFIG_PACKAGE_kmod-iio-bme680 is not set # CONFIG_PACKAGE_kmod-iio-bme680-i2c is not set # CONFIG_PACKAGE_kmod-iio-bme680-spi is not set # CONFIG_PACKAGE_kmod-iio-bmp280 is not set # CONFIG_PACKAGE_kmod-iio-bmp280-i2c is not set # CONFIG_PACKAGE_kmod-iio-bmp280-spi is not set # CONFIG_PACKAGE_kmod-iio-ccs811 is not set # CONFIG_PACKAGE_kmod-iio-core is not set # CONFIG_PACKAGE_kmod-iio-fxos8700 is not set # CONFIG_PACKAGE_kmod-iio-fxos8700-i2c is not set # CONFIG_PACKAGE_kmod-iio-fxos8700-spi is not set # CONFIG_PACKAGE_kmod-iio-hmc5843 is not set # CONFIG_PACKAGE_kmod-iio-htu21 is not set # CONFIG_PACKAGE_kmod-iio-kfifo-buf is not set # CONFIG_PACKAGE_kmod-iio-si7020 is not set # CONFIG_PACKAGE_kmod-iio-sps30 is not set # CONFIG_PACKAGE_kmod-iio-st_accel is not set # CONFIG_PACKAGE_kmod-iio-st_sensors-i2c is not set # CONFIG_PACKAGE_kmod-iio-st_sensors-spi is not set # CONFIG_PACKAGE_kmod-iio-tsl4531 is not set # CONFIG_PACKAGE_kmod-industrialio-triggered-buffer is not set # # Input modules # # CONFIG_PACKAGE_kmod-hid is not set # CONFIG_PACKAGE_kmod-hid-generic is not set # CONFIG_PACKAGE_kmod-input-core is not set # CONFIG_PACKAGE_kmod-input-evdev is not set # CONFIG_PACKAGE_kmod-input-gpio-encoder is not set # CONFIG_PACKAGE_kmod-input-gpio-keys is not set # CONFIG_PACKAGE_kmod-input-gpio-keys-polled is not set # CONFIG_PACKAGE_kmod-input-joydev is not set # CONFIG_PACKAGE_kmod-input-matrixkmap is not set # CONFIG_PACKAGE_kmod-input-polldev is not set # CONFIG_PACKAGE_kmod-input-touchscreen-ads7846 is not set # CONFIG_PACKAGE_kmod-input-uinput is not set # # LED modules # # CONFIG_PACKAGE_kmod-leds-gpio is not set # CONFIG_PACKAGE_kmod-leds-nu801 is not set # CONFIG_PACKAGE_kmod-leds-pca963x is not set # CONFIG_PACKAGE_kmod-leds-rb750 is not set # CONFIG_PACKAGE_kmod-leds-wndr3700-usb is not set # CONFIG_PACKAGE_kmod-ledtrig-default-on is not set # CONFIG_PACKAGE_kmod-ledtrig-gpio is not set # CONFIG_PACKAGE_kmod-ledtrig-heartbeat is not set # CONFIG_PACKAGE_kmod-ledtrig-netdev is not set # CONFIG_PACKAGE_kmod-ledtrig-oneshot is not set # CONFIG_PACKAGE_kmod-ledtrig-timer is not set # CONFIG_PACKAGE_kmod-ledtrig-transient is not set # # Libraries # # CONFIG_PACKAGE_kmod-lib-cordic is not set CONFIG_PACKAGE_kmod-lib-crc-ccitt=y # CONFIG_PACKAGE_kmod-lib-crc-itu-t is not set # CONFIG_PACKAGE_kmod-lib-crc16 is not set CONFIG_PACKAGE_kmod-lib-crc32c=y # CONFIG_PACKAGE_kmod-lib-crc7 is not set # CONFIG_PACKAGE_kmod-lib-crc8 is not set CONFIG_PACKAGE_kmod-lib-textsearch=y # # Native Language Support # CONFIG_PACKAGE_kmod-nls-base=y # CONFIG_PACKAGE_kmod-nls-cp1250 is not set # CONFIG_PACKAGE_kmod-nls-cp1251 is not set # CONFIG_PACKAGE_kmod-nls-cp437 is not set # CONFIG_PACKAGE_kmod-nls-cp775 is not set # CONFIG_PACKAGE_kmod-nls-cp850 is not set # CONFIG_PACKAGE_kmod-nls-cp852 is not set # CONFIG_PACKAGE_kmod-nls-cp862 is not set # CONFIG_PACKAGE_kmod-nls-cp864 is not set # CONFIG_PACKAGE_kmod-nls-cp866 is not set # CONFIG_PACKAGE_kmod-nls-cp932 is not set # CONFIG_PACKAGE_kmod-nls-cp936 is not set # CONFIG_PACKAGE_kmod-nls-cp950 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-1 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-13 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-15 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-2 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-6 is not set # CONFIG_PACKAGE_kmod-nls-iso8859-8 is not set # CONFIG_PACKAGE_kmod-nls-koi8r is not set # CONFIG_PACKAGE_kmod-nls-utf8 is not set # # Netfilter Extensions # # CONFIG_PACKAGE_kmod-arptables is not set # CONFIG_PACKAGE_kmod-br-netfilter is not set # CONFIG_PACKAGE_kmod-ebtables is not set # CONFIG_PACKAGE_kmod-ebtables-ipv4 is not set # CONFIG_PACKAGE_kmod-ebtables-ipv6 is not set # CONFIG_PACKAGE_kmod-ebtables-watchers is not set # CONFIG_PACKAGE_kmod-ip6tables is not set # CONFIG_PACKAGE_kmod-ip6tables-extra is not set # CONFIG_PACKAGE_kmod-ipt-account is not set # CONFIG_PACKAGE_kmod-ipt-chaos is not set # CONFIG_PACKAGE_kmod-ipt-checksum is not set # CONFIG_PACKAGE_kmod-ipt-cluster is not set # CONFIG_PACKAGE_kmod-ipt-clusterip is not set # CONFIG_PACKAGE_kmod-ipt-compat-xtables is not set # CONFIG_PACKAGE_kmod-ipt-condition is not set CONFIG_PACKAGE_kmod-ipt-conntrack=y # CONFIG_PACKAGE_kmod-ipt-conntrack-extra is not set # CONFIG_PACKAGE_kmod-ipt-conntrack-label is not set CONFIG_PACKAGE_kmod-ipt-core=y # CONFIG_PACKAGE_kmod-ipt-debug is not set # CONFIG_PACKAGE_kmod-ipt-delude is not set # CONFIG_PACKAGE_kmod-ipt-dhcpmac is not set # CONFIG_PACKAGE_kmod-ipt-dnetmap is not set # CONFIG_PACKAGE_kmod-ipt-extra is not set # CONFIG_PACKAGE_kmod-ipt-filter is not set CONFIG_PACKAGE_kmod-ipt-fullconenat=y # CONFIG_PACKAGE_kmod-ipt-fuzzy is not set # CONFIG_PACKAGE_kmod-ipt-geoip is not set # CONFIG_PACKAGE_kmod-ipt-hashlimit is not set # CONFIG_PACKAGE_kmod-ipt-iface is not set # CONFIG_PACKAGE_kmod-ipt-ipmark is not set # CONFIG_PACKAGE_kmod-ipt-ipopt is not set # CONFIG_PACKAGE_kmod-ipt-ipp2p is not set # CONFIG_PACKAGE_kmod-ipt-iprange is not set # CONFIG_PACKAGE_kmod-ipt-ipsec is not set CONFIG_PACKAGE_kmod-ipt-ipset=y # CONFIG_PACKAGE_kmod-ipt-ipv4options is not set # CONFIG_PACKAGE_kmod-ipt-led is not set # CONFIG_PACKAGE_kmod-ipt-length2 is not set # CONFIG_PACKAGE_kmod-ipt-logmark is not set # CONFIG_PACKAGE_kmod-ipt-lscan is not set # CONFIG_PACKAGE_kmod-ipt-lua is not set CONFIG_PACKAGE_kmod-ipt-nat=y # CONFIG_PACKAGE_kmod-ipt-nat-extra is not set # CONFIG_PACKAGE_kmod-ipt-nat6 is not set # CONFIG_PACKAGE_kmod-ipt-nathelper-rtsp is not set # CONFIG_PACKAGE_kmod-ipt-nflog is not set # CONFIG_PACKAGE_kmod-ipt-nfqueue is not set # CONFIG_PACKAGE_kmod-ipt-physdev is not set # CONFIG_PACKAGE_kmod-ipt-psd is not set # CONFIG_PACKAGE_kmod-ipt-quota2 is not set CONFIG_PACKAGE_kmod-ipt-raw=y # CONFIG_PACKAGE_kmod-ipt-raw6 is not set # CONFIG_PACKAGE_kmod-ipt-rpfilter is not set # CONFIG_PACKAGE_kmod-ipt-sysrq is not set # CONFIG_PACKAGE_kmod-ipt-tarpit is not set # CONFIG_PACKAGE_kmod-ipt-tee is not set # CONFIG_PACKAGE_kmod-ipt-tproxy is not set # CONFIG_PACKAGE_kmod-ipt-u32 is not set # CONFIG_PACKAGE_kmod-ipt-ulog is not set CONFIG_PACKAGE_kmod-nf-conntrack=y CONFIG_PACKAGE_kmod-nf-conntrack-netlink=y CONFIG_PACKAGE_kmod-nf-conntrack6=y CONFIG_PACKAGE_kmod-nf-ipt=y # CONFIG_PACKAGE_kmod-nf-ipt6 is not set # CONFIG_PACKAGE_kmod-nf-ipvs is not set CONFIG_PACKAGE_kmod-nf-nat=y # CONFIG_PACKAGE_kmod-nf-nat6 is not set CONFIG_PACKAGE_kmod-nf-nathelper=y CONFIG_PACKAGE_kmod-nf-nathelper-extra=y CONFIG_PACKAGE_kmod-nf-reject=y # CONFIG_PACKAGE_kmod-nf-reject6 is not set CONFIG_PACKAGE_kmod-nfnetlink=y # CONFIG_PACKAGE_kmod-nfnetlink-log is not set # CONFIG_PACKAGE_kmod-nfnetlink-queue is not set # CONFIG_PACKAGE_kmod-nft-arp is not set # CONFIG_PACKAGE_kmod-nft-bridge is not set # CONFIG_PACKAGE_kmod-nft-core is not set # CONFIG_PACKAGE_kmod-nft-fib is not set # CONFIG_PACKAGE_kmod-nft-nat is not set # CONFIG_PACKAGE_kmod-nft-nat6 is not set # CONFIG_PACKAGE_kmod-nft-netdev is not set # # Network Devices # # CONFIG_PACKAGE_kmod-3c59x is not set # CONFIG_PACKAGE_kmod-8139cp is not set # CONFIG_PACKAGE_kmod-8139too is not set # CONFIG_PACKAGE_kmod-alx is not set # CONFIG_PACKAGE_kmod-atl1 is not set # CONFIG_PACKAGE_kmod-atl1c is not set # CONFIG_PACKAGE_kmod-atl1e is not set # CONFIG_PACKAGE_kmod-atl2 is not set # CONFIG_PACKAGE_kmod-b44 is not set # CONFIG_PACKAGE_kmod-be2net is not set # CONFIG_PACKAGE_kmod-bnx2 is not set # CONFIG_PACKAGE_kmod-bnx2x is not set # CONFIG_PACKAGE_kmod-dm9000 is not set # CONFIG_PACKAGE_kmod-dummy is not set # CONFIG_PACKAGE_kmod-e100 is not set # CONFIG_PACKAGE_kmod-e1000 is not set # CONFIG_PACKAGE_kmod-et131x is not set # CONFIG_PACKAGE_kmod-ethoc is not set # CONFIG_PACKAGE_kmod-forcedeth is not set # CONFIG_PACKAGE_kmod-gigaset is not set # CONFIG_PACKAGE_kmod-hfcmulti is not set # CONFIG_PACKAGE_kmod-hfcpci is not set # CONFIG_PACKAGE_kmod-i40e is not set # CONFIG_PACKAGE_kmod-i40evf is not set # CONFIG_PACKAGE_kmod-ifb is not set # CONFIG_PACKAGE_kmod-igb is not set # CONFIG_PACKAGE_kmod-ixgbe is not set # CONFIG_PACKAGE_kmod-ixgbevf is not set # CONFIG_PACKAGE_kmod-libphy is not set CONFIG_PACKAGE_kmod-macvlan=y # CONFIG_PACKAGE_kmod-mdio-gpio is not set # CONFIG_PACKAGE_kmod-mii is not set # CONFIG_PACKAGE_kmod-mlx4-core is not set # CONFIG_PACKAGE_kmod-mlx5-core is not set # CONFIG_PACKAGE_kmod-natsemi is not set # CONFIG_PACKAGE_kmod-ne2k-pci is not set # CONFIG_PACKAGE_kmod-niu is not set # CONFIG_PACKAGE_kmod-of-mdio is not set # CONFIG_PACKAGE_kmod-pcnet32 is not set # CONFIG_PACKAGE_kmod-phy-broadcom is not set # CONFIG_PACKAGE_kmod-phy-realtek is not set # CONFIG_PACKAGE_kmod-r6040 is not set # CONFIG_PACKAGE_kmod-r8125 is not set # CONFIG_PACKAGE_kmod-r8168 is not set # CONFIG_PACKAGE_kmod-r8169 is not set # CONFIG_PACKAGE_kmod-sfc is not set # CONFIG_PACKAGE_kmod-siit is not set # CONFIG_PACKAGE_kmod-sis190 is not set # CONFIG_PACKAGE_kmod-sis900 is not set # CONFIG_PACKAGE_kmod-skge is not set # CONFIG_PACKAGE_kmod-sky2 is not set # CONFIG_PACKAGE_kmod-solos-pci is not set # CONFIG_PACKAGE_kmod-spi-ks8995 is not set # CONFIG_PACKAGE_kmod-swconfig is not set # CONFIG_PACKAGE_kmod-switch-ip17xx is not set # CONFIG_PACKAGE_kmod-switch-mvsw61xx is not set # CONFIG_PACKAGE_kmod-switch-rtl8306 is not set # CONFIG_PACKAGE_kmod-switch-rtl8366-smi is not set # CONFIG_PACKAGE_kmod-switch-rtl8366rb is not set # CONFIG_PACKAGE_kmod-switch-rtl8366s is not set # CONFIG_PACKAGE_kmod-switch-rtl8367b is not set # CONFIG_PACKAGE_kmod-tg3 is not set # CONFIG_PACKAGE_kmod-tulip is not set # CONFIG_PACKAGE_kmod-via-rhine is not set # CONFIG_PACKAGE_kmod-via-velocity is not set # CONFIG_PACKAGE_kmod-vmxnet3 is not set # # Network Support # # CONFIG_PACKAGE_kmod-atm is not set # CONFIG_PACKAGE_kmod-ax25 is not set # CONFIG_PACKAGE_kmod-batman-adv is not set # CONFIG_PACKAGE_kmod-bonding is not set # CONFIG_PACKAGE_kmod-bpf-test is not set # CONFIG_PACKAGE_kmod-capi is not set # CONFIG_PACKAGE_kmod-dnsresolver is not set CONFIG_PACKAGE_kmod-fast-classifier=y # CONFIG_PACKAGE_kmod-fou is not set # CONFIG_PACKAGE_kmod-fou6 is not set # CONFIG_PACKAGE_kmod-geneve is not set # CONFIG_PACKAGE_kmod-gre is not set # CONFIG_PACKAGE_kmod-gre6 is not set # CONFIG_PACKAGE_kmod-ip6-tunnel is not set # CONFIG_PACKAGE_kmod-ipip is not set # CONFIG_PACKAGE_kmod-ipsec is not set # CONFIG_PACKAGE_kmod-iptunnel6 is not set # CONFIG_PACKAGE_kmod-isdn4linux is not set # CONFIG_PACKAGE_kmod-jool is not set # CONFIG_PACKAGE_kmod-l2tp is not set # CONFIG_PACKAGE_kmod-l2tp-eth is not set # CONFIG_PACKAGE_kmod-l2tp-ip is not set # CONFIG_PACKAGE_kmod-macremapper is not set # CONFIG_PACKAGE_kmod-macsec is not set # CONFIG_PACKAGE_kmod-misdn is not set # CONFIG_PACKAGE_kmod-mpls is not set # CONFIG_PACKAGE_kmod-nat46 is not set # CONFIG_PACKAGE_kmod-netem is not set # CONFIG_PACKAGE_kmod-nlmon is not set # CONFIG_PACKAGE_kmod-nsh is not set # CONFIG_PACKAGE_kmod-openvswitch is not set # CONFIG_PACKAGE_kmod-openvswitch-geneve is not set # CONFIG_PACKAGE_kmod-openvswitch-gre is not set # CONFIG_PACKAGE_kmod-openvswitch-vxlan is not set # CONFIG_PACKAGE_kmod-pktgen is not set CONFIG_PACKAGE_kmod-ppp=y CONFIG_PACKAGE_kmod-mppe=y # CONFIG_PACKAGE_kmod-ppp-synctty is not set # CONFIG_PACKAGE_kmod-pppoa is not set CONFIG_PACKAGE_kmod-pppoe=y # CONFIG_PACKAGE_kmod-pppol2tp is not set CONFIG_PACKAGE_kmod-pppox=y # CONFIG_PACKAGE_kmod-pptp is not set CONFIG_PACKAGE_kmod-sched=y # CONFIG_PACKAGE_kmod-sched-act-vlan is not set # CONFIG_PACKAGE_kmod-sched-bpf is not set # CONFIG_PACKAGE_kmod-sched-cake is not set # CONFIG_PACKAGE_kmod-sched-connmark is not set CONFIG_PACKAGE_kmod-sched-core=y # CONFIG_PACKAGE_kmod-sched-ctinfo is not set # CONFIG_PACKAGE_kmod-sched-flower is not set # CONFIG_PACKAGE_kmod-sched-ipset is not set # CONFIG_PACKAGE_kmod-sched-mqprio is not set # CONFIG_PACKAGE_kmod-sctp is not set CONFIG_PACKAGE_kmod-shortcut-fe=y # CONFIG_PACKAGE_kmod-shortcut-fe-cm is not set # CONFIG_PACKAGE_kmod-sit is not set CONFIG_PACKAGE_kmod-slhc=y # CONFIG_PACKAGE_kmod-slip is not set CONFIG_PACKAGE_kmod-tcp-bbr=y # CONFIG_PACKAGE_kmod-trelay is not set # CONFIG_PACKAGE_kmod-tun is not set # CONFIG_PACKAGE_kmod-veth is not set # CONFIG_PACKAGE_kmod-vxlan is not set # CONFIG_PACKAGE_kmod-wireguard is not set # # Other modules # # CONFIG_PACKAGE_kmod-6lowpan is not set # CONFIG_PACKAGE_kmod-ath3k is not set # CONFIG_PACKAGE_kmod-bcma is not set # CONFIG_PACKAGE_kmod-bluetooth is not set # CONFIG_PACKAGE_kmod-bluetooth_6lowpan is not set # CONFIG_PACKAGE_kmod-bmp085 is not set # CONFIG_PACKAGE_kmod-bmp085-i2c is not set # CONFIG_PACKAGE_kmod-bmp085-spi is not set # CONFIG_PACKAGE_kmod-btmrvl is not set # CONFIG_PACKAGE_kmod-button-hotplug is not set # CONFIG_PACKAGE_kmod-echo is not set # CONFIG_PACKAGE_kmod-eeprom-93cx6 is not set # CONFIG_PACKAGE_kmod-eeprom-at24 is not set # CONFIG_PACKAGE_kmod-eeprom-at25 is not set # CONFIG_PACKAGE_kmod-gpio-beeper is not set CONFIG_PACKAGE_kmod-gpio-button-hotplug=y # CONFIG_PACKAGE_kmod-gpio-dev is not set # CONFIG_PACKAGE_kmod-gpio-mcp23s08 is not set # CONFIG_PACKAGE_kmod-gpio-nxp-74hc164 is not set # CONFIG_PACKAGE_kmod-gpio-pca953x is not set # CONFIG_PACKAGE_kmod-gpio-pcf857x is not set # CONFIG_PACKAGE_kmod-ikconfig is not set # CONFIG_PACKAGE_kmod-it87-wdt is not set # CONFIG_PACKAGE_kmod-itco-wdt is not set # CONFIG_PACKAGE_kmod-lp is not set # CONFIG_PACKAGE_kmod-mmc is not set # CONFIG_PACKAGE_kmod-mtd-rw is not set # CONFIG_PACKAGE_kmod-mtdoops is not set # CONFIG_PACKAGE_kmod-mtdram is not set # CONFIG_PACKAGE_kmod-mtdtests is not set # CONFIG_PACKAGE_kmod-parport-pc is not set # CONFIG_PACKAGE_kmod-ppdev is not set # CONFIG_PACKAGE_kmod-pps is not set # CONFIG_PACKAGE_kmod-pps-gpio is not set # CONFIG_PACKAGE_kmod-pps-ldisc is not set # CONFIG_PACKAGE_kmod-ptp is not set # CONFIG_PACKAGE_kmod-random-core is not set # CONFIG_PACKAGE_kmod-random-tpm is not set # CONFIG_PACKAGE_kmod-rtc-ds1307 is not set # CONFIG_PACKAGE_kmod-rtc-ds1374 is not set # CONFIG_PACKAGE_kmod-rtc-ds1672 is not set # CONFIG_PACKAGE_kmod-rtc-em3027 is not set # CONFIG_PACKAGE_kmod-rtc-isl1208 is not set # CONFIG_PACKAGE_kmod-rtc-pcf2123 is not set # CONFIG_PACKAGE_kmod-rtc-pcf2127 is not set # CONFIG_PACKAGE_kmod-rtc-pcf8563 is not set # CONFIG_PACKAGE_kmod-rtc-pt7c4338 is not set # CONFIG_PACKAGE_kmod-rtc-rs5c372a is not set # CONFIG_PACKAGE_kmod-rtc-rx8025 is not set # CONFIG_PACKAGE_kmod-sdhci is not set # CONFIG_PACKAGE_kmod-serial-8250 is not set # CONFIG_PACKAGE_kmod-serial-8250-exar is not set # CONFIG_PACKAGE_kmod-softdog is not set # CONFIG_PACKAGE_kmod-ssb is not set CONFIG_PACKAGE_kmod-thermal=y # CONFIG_PACKAGE_kmod-tpm is not set # CONFIG_PACKAGE_kmod-tpm-i2c-atmel is not set # CONFIG_PACKAGE_kmod-tpm-i2c-infineon is not set # CONFIG_PACKAGE_kmod-w83627hf-wdt is not set # CONFIG_PACKAGE_kmod-wifidog-ng is not set # CONFIG_PACKAGE_kmod-zram is not set # # PCMCIA support # # # SPI Support # # CONFIG_PACKAGE_kmod-mmc-spi is not set # CONFIG_PACKAGE_kmod-spi-bitbang is not set # CONFIG_PACKAGE_kmod-spi-dev is not set # CONFIG_PACKAGE_kmod-spi-gpio is not set # CONFIG_PACKAGE_kmod-spi-gpio-custom is not set # CONFIG_PACKAGE_kmod-spi-vsc7385 is not set # # Sound Support # # CONFIG_PACKAGE_kmod-sound-core is not set # # USB Support # # CONFIG_PACKAGE_kmod-chaoskey is not set # CONFIG_PACKAGE_kmod-usb-acm is not set # CONFIG_PACKAGE_kmod-usb-atm is not set # CONFIG_PACKAGE_kmod-usb-chipidea is not set # CONFIG_PACKAGE_kmod-usb-chipidea2 is not set # CONFIG_PACKAGE_kmod-usb-cm109 is not set CONFIG_PACKAGE_kmod-usb-core=y # CONFIG_PACKAGE_kmod-usb-dwc2 is not set # CONFIG_PACKAGE_kmod-usb-dwc3 is not set CONFIG_PACKAGE_kmod-usb-ehci=y # CONFIG_PACKAGE_kmod-usb-gadget-cdc-composite is not set # CONFIG_PACKAGE_kmod-usb-gadget-ehci-debug is not set # CONFIG_PACKAGE_kmod-usb-gadget-eth is not set # CONFIG_PACKAGE_kmod-usb-gadget-hid is not set # CONFIG_PACKAGE_kmod-usb-gadget-mass-storage is not set # CONFIG_PACKAGE_kmod-usb-gadget-serial is not set # CONFIG_PACKAGE_kmod-usb-hid is not set CONFIG_PACKAGE_kmod-usb-ledtrig-usbport=y # CONFIG_PACKAGE_kmod-usb-net is not set # CONFIG_PACKAGE_kmod-usb-net2280 is not set # CONFIG_PACKAGE_kmod-usb-ohci is not set # CONFIG_PACKAGE_kmod-usb-ohci-pci is not set # CONFIG_PACKAGE_kmod-usb-printer is not set # CONFIG_PACKAGE_kmod-usb-serial is not set # CONFIG_PACKAGE_kmod-usb-storage is not set # CONFIG_PACKAGE_kmod-usb-storage-extras is not set # CONFIG_PACKAGE_kmod-usb-storage-uas is not set # CONFIG_PACKAGE_kmod-usb-uhci is not set # CONFIG_PACKAGE_kmod-usb-wdm is not set # CONFIG_PACKAGE_kmod-usb-yealink is not set CONFIG_PACKAGE_kmod-usb2=y # CONFIG_PACKAGE_kmod-usb2-pci is not set # CONFIG_PACKAGE_kmod-usb3 is not set # CONFIG_PACKAGE_kmod-usbip is not set # CONFIG_PACKAGE_kmod-usbip-client is not set # CONFIG_PACKAGE_kmod-usbip-server is not set # CONFIG_PACKAGE_kmod-usbmon is not set # # Video Support # # CONFIG_PACKAGE_kmod-video-core is not set # # Virtualization # # # Voice over IP # # # W1 support # # CONFIG_PACKAGE_kmod-w1 is not set # # WPAN 802.15.4 Support # # CONFIG_PACKAGE_kmod-at86rf230 is not set # CONFIG_PACKAGE_kmod-atusb is not set # CONFIG_PACKAGE_kmod-cc2520 is not set # CONFIG_PACKAGE_kmod-fakelb is not set # CONFIG_PACKAGE_kmod-ieee802154 is not set # CONFIG_PACKAGE_kmod-ieee802154_6lowpan is not set # CONFIG_PACKAGE_kmod-mac802154 is not set # CONFIG_PACKAGE_kmod-mrf24j40 is not set # # Wireless Drivers # # CONFIG_PACKAGE_kmod-adm8211 is not set CONFIG_PACKAGE_kmod-ath=y CONFIG_ATH_USER_REGD=y # CONFIG_PACKAGE_ATH_DEBUG is not set CONFIG_PACKAGE_ATH_DFS=y # CONFIG_PACKAGE_ATH_DYNACK is not set CONFIG_PACKAGE_kmod-ath10k=y CONFIG_ATH10K_LEDS=y CONFIG_ATH10K_THERMAL=y # CONFIG_PACKAGE_kmod-ath10k-ct is not set # CONFIG_PACKAGE_kmod-ath10k-ct-smallbuffers is not set # CONFIG_PACKAGE_kmod-ath5k is not set # CONFIG_PACKAGE_kmod-ath6kl-sdio is not set # CONFIG_PACKAGE_kmod-ath6kl-usb is not set CONFIG_PACKAGE_kmod-ath9k=y # CONFIG_ATH9K_SUPPORT_PCOEM is not set # CONFIG_ATH9K_TX99 is not set CONFIG_ATH9K_UBNTHSR=y CONFIG_PACKAGE_kmod-ath9k-common=y # CONFIG_PACKAGE_kmod-ath9k-htc is not set # CONFIG_PACKAGE_kmod-b43 is not set # CONFIG_PACKAGE_kmod-b43legacy is not set # CONFIG_PACKAGE_kmod-brcmfmac is not set # CONFIG_PACKAGE_kmod-brcmsmac is not set # CONFIG_PACKAGE_kmod-brcmutil is not set # CONFIG_PACKAGE_kmod-carl9170 is not set CONFIG_PACKAGE_kmod-cfg80211=y # CONFIG_PACKAGE_kmod-hermes is not set # CONFIG_PACKAGE_kmod-hermes-pci is not set # CONFIG_PACKAGE_kmod-hermes-plx is not set # CONFIG_PACKAGE_kmod-iwl-legacy is not set # CONFIG_PACKAGE_kmod-iwl3945 is not set # CONFIG_PACKAGE_kmod-iwl4965 is not set # CONFIG_PACKAGE_kmod-iwlwifi is not set # CONFIG_PACKAGE_kmod-lib80211 is not set # CONFIG_PACKAGE_kmod-libertas-sdio is not set # CONFIG_PACKAGE_kmod-libertas-spi is not set # CONFIG_PACKAGE_kmod-libertas-usb is not set CONFIG_PACKAGE_kmod-mac80211=y CONFIG_PACKAGE_MAC80211_DEBUGFS=y # CONFIG_PACKAGE_MAC80211_TRACING is not set CONFIG_PACKAGE_MAC80211_MESH=y # CONFIG_PACKAGE_kmod-mac80211-hwsim is not set # CONFIG_PACKAGE_kmod-mt76 is not set # CONFIG_PACKAGE_kmod-mt7601u is not set # CONFIG_PACKAGE_kmod-mt7603 is not set # CONFIG_PACKAGE_kmod-mt7615e is not set # CONFIG_PACKAGE_kmod-mt76x0e is not set # CONFIG_PACKAGE_kmod-mt76x0u is not set # CONFIG_PACKAGE_kmod-mt76x2 is not set # CONFIG_PACKAGE_kmod-mt76x2u is not set # CONFIG_PACKAGE_kmod-mt_wifi is not set # CONFIG_PACKAGE_kmod-mwifiex-pcie is not set # CONFIG_PACKAGE_kmod-mwifiex-sdio is not set # CONFIG_PACKAGE_kmod-mwl8k is not set # CONFIG_PACKAGE_kmod-net-prism54 is not set # CONFIG_PACKAGE_kmod-net-rtl8192su is not set # CONFIG_PACKAGE_kmod-owl-loader is not set # CONFIG_PACKAGE_kmod-p54-common is not set # CONFIG_PACKAGE_kmod-p54-pci is not set # CONFIG_PACKAGE_kmod-p54-usb is not set # CONFIG_PACKAGE_kmod-rsi91x is not set # CONFIG_PACKAGE_kmod-rsi91x-sdio is not set # CONFIG_PACKAGE_kmod-rsi91x-usb is not set # CONFIG_PACKAGE_kmod-rt2400-pci is not set # CONFIG_PACKAGE_kmod-rt2500-pci is not set # CONFIG_PACKAGE_kmod-rt2500-usb is not set # CONFIG_PACKAGE_kmod-rt2800-pci is not set # CONFIG_PACKAGE_kmod-rt2800-usb is not set # CONFIG_PACKAGE_kmod-rt2x00-lib is not set # CONFIG_PACKAGE_kmod-rt61-pci is not set # CONFIG_PACKAGE_kmod-rt73-usb is not set # CONFIG_PACKAGE_kmod-rtl8180 is not set # CONFIG_PACKAGE_kmod-rtl8187 is not set # CONFIG_PACKAGE_kmod-rtl8192ce is not set # CONFIG_PACKAGE_kmod-rtl8192cu is not set # CONFIG_PACKAGE_kmod-rtl8192de is not set # CONFIG_PACKAGE_kmod-rtl8192se is not set # CONFIG_PACKAGE_kmod-rtl8821ae is not set # CONFIG_PACKAGE_kmod-rtl8xxxu is not set # CONFIG_PACKAGE_kmod-wl12xx is not set # CONFIG_PACKAGE_kmod-wl18xx is not set # CONFIG_PACKAGE_kmod-wlcore is not set # CONFIG_PACKAGE_kmod-zd1211rw is not set # CONFIG_PACKAGE_wifi-l1profile is not set # # Languages # # # Erlang # # CONFIG_PACKAGE_erlang is not set # CONFIG_PACKAGE_erlang-asn1 is not set # CONFIG_PACKAGE_erlang-compiler is not set # CONFIG_PACKAGE_erlang-crypto is not set # CONFIG_PACKAGE_erlang-hipe is not set # CONFIG_PACKAGE_erlang-inets is not set # CONFIG_PACKAGE_erlang-mnesia is not set # CONFIG_PACKAGE_erlang-runtime-tools is not set # CONFIG_PACKAGE_erlang-snmp is not set # CONFIG_PACKAGE_erlang-ssh is not set # CONFIG_PACKAGE_erlang-ssl is not set # CONFIG_PACKAGE_erlang-syntax-tools is not set # # Go # # CONFIG_PACKAGE_golang is not set # CONFIG_PACKAGE_golang-doc is not set # CONFIG_PACKAGE_golang-github-nextdns-nextdns-dev is not set # CONFIG_PACKAGE_golang-src is not set # # Java # # CONFIG_PACKAGE_jamvm is not set # # Lua # # CONFIG_PACKAGE_dkjson is not set # CONFIG_PACKAGE_json4lua is not set # CONFIG_PACKAGE_ldbus is not set CONFIG_PACKAGE_libiwinfo-lua=y # CONFIG_PACKAGE_lpeg is not set # CONFIG_PACKAGE_lsqlite3 is not set CONFIG_PACKAGE_lua=y # CONFIG_PACKAGE_lua-bencode is not set # CONFIG_PACKAGE_lua-cjson is not set # CONFIG_PACKAGE_lua-copas is not set # CONFIG_PACKAGE_lua-coxpcall is not set # CONFIG_PACKAGE_lua-examples is not set # CONFIG_PACKAGE_lua-lzlib is not set # CONFIG_PACKAGE_lua-md5 is not set # CONFIG_PACKAGE_lua-mobdebug is not set # CONFIG_PACKAGE_lua-mosquitto is not set # CONFIG_PACKAGE_lua-openssl is not set # CONFIG_PACKAGE_lua-penlight is not set # CONFIG_PACKAGE_lua-rings is not set # CONFIG_PACKAGE_lua-rs232 is not set # CONFIG_PACKAGE_lua-sha2 is not set # CONFIG_PACKAGE_lua-wsapi-base is not set # CONFIG_PACKAGE_lua-wsapi-xavante is not set # CONFIG_PACKAGE_lua-xavante is not set # CONFIG_PACKAGE_luabitop is not set # CONFIG_PACKAGE_luac is not set # CONFIG_PACKAGE_luaexpat is not set # CONFIG_PACKAGE_luafilesystem is not set # CONFIG_PACKAGE_luajit is not set # CONFIG_PACKAGE_lualanes is not set # CONFIG_PACKAGE_luaposix is not set # CONFIG_PACKAGE_luarocks is not set # CONFIG_PACKAGE_luasec is not set # CONFIG_PACKAGE_luasoap is not set # CONFIG_PACKAGE_luasocket is not set # CONFIG_PACKAGE_luasql-mysql is not set # CONFIG_PACKAGE_luasql-pgsql is not set # CONFIG_PACKAGE_luasql-sqlite3 is not set CONFIG_PACKAGE_luci-lib-fs=y # CONFIG_PACKAGE_luv is not set # CONFIG_PACKAGE_lzmq is not set # CONFIG_PACKAGE_uuid is not set # # Node.js # # CONFIG_PACKAGE_node is not set # CONFIG_PACKAGE_node-arduino-firmata is not set # CONFIG_PACKAGE_node-cylon is not set # CONFIG_PACKAGE_node-cylon-firmata is not set # CONFIG_PACKAGE_node-cylon-gpio is not set # CONFIG_PACKAGE_node-cylon-i2c is not set # CONFIG_PACKAGE_node-hid is not set # CONFIG_PACKAGE_node-homebridge is not set # CONFIG_PACKAGE_node-javascript-obfuscator is not set # CONFIG_PACKAGE_node-npm is not set # CONFIG_PACKAGE_node-serialport is not set # CONFIG_PACKAGE_node-serialport-bindings is not set # # PHP # # CONFIG_PACKAGE_php7 is not set # # Perl # # CONFIG_PACKAGE_perl is not set # # Python # # CONFIG_PACKAGE_gunicorn is not set # CONFIG_PACKAGE_gunicorn3 is not set # CONFIG_PACKAGE_micropython is not set # CONFIG_PACKAGE_micropython-lib is not set # CONFIG_PACKAGE_python is not set # CONFIG_PACKAGE_python-astral is not set # CONFIG_PACKAGE_python-astral-src is not set # CONFIG_PACKAGE_python-attrs is not set # CONFIG_PACKAGE_python-attrs-src is not set # CONFIG_PACKAGE_python-automat is not set # CONFIG_PACKAGE_python-automat-src is not set # CONFIG_PACKAGE_python-awscli is not set # CONFIG_PACKAGE_python-awscli-src is not set # CONFIG_PACKAGE_python-base is not set # CONFIG_PACKAGE_python-base-src is not set # CONFIG_PACKAGE_python-bcrypt is not set # CONFIG_PACKAGE_python-bcrypt-src is not set # CONFIG_PACKAGE_python-botocore is not set # CONFIG_PACKAGE_python-botocore-src is not set # CONFIG_PACKAGE_python-certifi is not set # CONFIG_PACKAGE_python-certifi-src is not set # CONFIG_PACKAGE_python-cffi is not set # CONFIG_PACKAGE_python-cffi-src is not set # CONFIG_PACKAGE_python-chardet is not set # CONFIG_PACKAGE_python-chardet-src is not set # CONFIG_PACKAGE_python-codecs is not set # CONFIG_PACKAGE_python-codecs-src is not set # CONFIG_PACKAGE_python-colorama is not set # CONFIG_PACKAGE_python-colorama-src is not set # CONFIG_PACKAGE_python-compiler is not set # CONFIG_PACKAGE_python-compiler-src is not set # CONFIG_PACKAGE_python-constantly is not set # CONFIG_PACKAGE_python-constantly-src is not set # CONFIG_PACKAGE_python-crcmod is not set # CONFIG_PACKAGE_python-crypto is not set # CONFIG_PACKAGE_python-crypto-src is not set # CONFIG_PACKAGE_python-cryptodome is not set # CONFIG_PACKAGE_python-cryptodome-src is not set # CONFIG_PACKAGE_python-cryptodomex is not set # CONFIG_PACKAGE_python-cryptodomex-src is not set # CONFIG_PACKAGE_python-cryptography is not set # CONFIG_PACKAGE_python-cryptography-src is not set # CONFIG_PACKAGE_python-ctypes is not set # CONFIG_PACKAGE_python-ctypes-src is not set # CONFIG_PACKAGE_python-curl is not set # CONFIG_PACKAGE_python-curl-src is not set # CONFIG_PACKAGE_python-dateutil is not set # CONFIG_PACKAGE_python-dateutil-src is not set # CONFIG_PACKAGE_python-db is not set # CONFIG_PACKAGE_python-db-src is not set # CONFIG_PACKAGE_python-decimal is not set # CONFIG_PACKAGE_python-decimal-src is not set # CONFIG_PACKAGE_python-defusedxml is not set # CONFIG_PACKAGE_python-defusedxml-src is not set # CONFIG_PACKAGE_python-dev is not set # CONFIG_PACKAGE_python-dev-src is not set # CONFIG_PACKAGE_python-distutils is not set # CONFIG_PACKAGE_python-distutils-src is not set # CONFIG_PACKAGE_python-django1 is not set # CONFIG_PACKAGE_python-django1-common is not set # CONFIG_PACKAGE_python-django1-src is not set # CONFIG_PACKAGE_python-dns is not set # CONFIG_PACKAGE_python-dns-src is not set # CONFIG_PACKAGE_python-docutils is not set # CONFIG_PACKAGE_python-docutils-src is not set # CONFIG_PACKAGE_python-dpkt is not set # CONFIG_PACKAGE_python-egenix-mx-base is not set # CONFIG_PACKAGE_python-egenix-mx-base-src is not set # CONFIG_PACKAGE_python-email is not set # CONFIG_PACKAGE_python-email-src is not set # CONFIG_PACKAGE_python-enum34 is not set # CONFIG_PACKAGE_python-enum34-src is not set # CONFIG_PACKAGE_python-et_xmlfile is not set # CONFIG_PACKAGE_python-et_xmlfile-src is not set # CONFIG_PACKAGE_python-evdev is not set # CONFIG_PACKAGE_python-evdev-src is not set # CONFIG_PACKAGE_python-flup is not set # CONFIG_PACKAGE_python-flup-src is not set # CONFIG_PACKAGE_python-futures is not set # CONFIG_PACKAGE_python-futures-src is not set # CONFIG_PACKAGE_python-gdbm is not set # CONFIG_PACKAGE_python-gdbm-src is not set # CONFIG_PACKAGE_python-gmpy2 is not set # CONFIG_PACKAGE_python-gmpy2-src is not set # CONFIG_PACKAGE_python-gnupg is not set # CONFIG_PACKAGE_python-gunicorn is not set # CONFIG_PACKAGE_python-gunicorn-src is not set # CONFIG_PACKAGE_python-hyperlink is not set # CONFIG_PACKAGE_python-hyperlink-src is not set # CONFIG_PACKAGE_python-idna is not set # CONFIG_PACKAGE_python-idna-src is not set # CONFIG_PACKAGE_python-incremental is not set # CONFIG_PACKAGE_python-incremental-src is not set # CONFIG_PACKAGE_python-ipaddress is not set # CONFIG_PACKAGE_python-ipaddress-src is not set # CONFIG_PACKAGE_python-jdcal is not set # CONFIG_PACKAGE_python-jdcal-src is not set # CONFIG_PACKAGE_python-jmespath is not set # CONFIG_PACKAGE_python-jmespath-src is not set # CONFIG_PACKAGE_python-ldap is not set # CONFIG_PACKAGE_python-lib2to3 is not set # CONFIG_PACKAGE_python-lib2to3-src is not set # CONFIG_PACKAGE_python-libmodbus is not set # CONFIG_PACKAGE_python-light is not set # # Configuration # # CONFIG_PYTHON_BLUETOOTH_SUPPORT is not set # CONFIG_PACKAGE_python-light-src is not set # CONFIG_PACKAGE_python-logging is not set # CONFIG_PACKAGE_python-logging-src is not set # CONFIG_PACKAGE_python-lxml is not set # CONFIG_PACKAGE_python-lxml-src is not set # CONFIG_PACKAGE_python-multiprocessing is not set # CONFIG_PACKAGE_python-multiprocessing-src is not set # CONFIG_PACKAGE_python-mysqlclient is not set # CONFIG_PACKAGE_python-mysqlclient-src is not set # CONFIG_PACKAGE_python-ncurses is not set # CONFIG_PACKAGE_python-ncurses-src is not set # CONFIG_PACKAGE_python-oauthlib is not set # CONFIG_PACKAGE_python-oauthlib-src is not set # CONFIG_PACKAGE_python-openpyxl is not set # CONFIG_PACKAGE_python-openpyxl-src is not set # CONFIG_PACKAGE_python-openssl is not set # CONFIG_PACKAGE_python-openssl-src is not set # CONFIG_PACKAGE_python-parsley is not set # CONFIG_PACKAGE_python-parsley-src is not set # CONFIG_PACKAGE_python-passlib is not set # CONFIG_PACKAGE_python-passlib-src is not set # CONFIG_PACKAGE_python-pcapy is not set # CONFIG_PACKAGE_python-pillow is not set # CONFIG_PACKAGE_python-pillow-src is not set # CONFIG_PACKAGE_python-pip is not set # CONFIG_PACKAGE_python-pip-conf is not set # CONFIG_PACKAGE_python-pip-src is not set # CONFIG_PACKAGE_python-pkg-resources is not set # CONFIG_PACKAGE_python-pkg-resources-src is not set # CONFIG_PACKAGE_python-ply is not set # CONFIG_PACKAGE_python-ply-src is not set # CONFIG_PACKAGE_python-psycopg2 is not set # CONFIG_PACKAGE_python-pyasn1 is not set # CONFIG_PACKAGE_python-pyasn1-modules is not set # CONFIG_PACKAGE_python-pyasn1-modules-src is not set # CONFIG_PACKAGE_python-pyasn1-src is not set # CONFIG_PACKAGE_python-pycparser is not set # CONFIG_PACKAGE_python-pycparser-src is not set # CONFIG_PACKAGE_python-pydoc is not set # CONFIG_PACKAGE_python-pydoc-src is not set # CONFIG_PACKAGE_python-pyjwt is not set # CONFIG_PACKAGE_python-pyjwt-src is not set # CONFIG_PACKAGE_python-pyodbc is not set # CONFIG_PACKAGE_python-pyopenssl is not set # CONFIG_PACKAGE_python-pyopenssl-src is not set # CONFIG_PACKAGE_python-pyptlib is not set # CONFIG_PACKAGE_python-pyptlib-src is not set # CONFIG_PACKAGE_python-pyserial is not set # CONFIG_PACKAGE_python-pyserial-src is not set # CONFIG_PACKAGE_python-pytz is not set # CONFIG_PACKAGE_python-pytz-src is not set # CONFIG_PACKAGE_python-qrcode is not set # CONFIG_PACKAGE_python-qrcode-src is not set # CONFIG_PACKAGE_python-rcssmin is not set # CONFIG_PACKAGE_python-rcssmin-src is not set # CONFIG_PACKAGE_python-requests is not set # CONFIG_PACKAGE_python-requests-oauthlib is not set # CONFIG_PACKAGE_python-requests-oauthlib-src is not set # CONFIG_PACKAGE_python-requests-src is not set # CONFIG_PACKAGE_python-rsa is not set # CONFIG_PACKAGE_python-rsa-src is not set # CONFIG_PACKAGE_python-ruamel-yaml is not set # CONFIG_PACKAGE_python-ruamel-yaml-src is not set # CONFIG_PACKAGE_python-s3transfer is not set # CONFIG_PACKAGE_python-s3transfer-src is not set # CONFIG_PACKAGE_python-service-identity is not set # CONFIG_PACKAGE_python-service-identity-src is not set # CONFIG_PACKAGE_python-setuptools is not set # CONFIG_PACKAGE_python-setuptools-src is not set # CONFIG_PACKAGE_python-simplejson is not set # CONFIG_PACKAGE_python-simplejson-src is not set # CONFIG_PACKAGE_python-six is not set # CONFIG_PACKAGE_python-six-src is not set # CONFIG_PACKAGE_python-smbus is not set # CONFIG_PACKAGE_python-sqlite3 is not set # CONFIG_PACKAGE_python-sqlite3-src is not set # CONFIG_PACKAGE_python-text-unidecode is not set # CONFIG_PACKAGE_python-text-unidecode-src is not set # CONFIG_PACKAGE_python-twisted is not set # CONFIG_PACKAGE_python-twisted-src is not set # CONFIG_PACKAGE_python-txsocksx is not set # CONFIG_PACKAGE_python-txsocksx-src is not set # CONFIG_PACKAGE_python-unittest is not set # CONFIG_PACKAGE_python-unittest-src is not set # CONFIG_PACKAGE_python-urllib3 is not set # CONFIG_PACKAGE_python-urllib3-src is not set # CONFIG_PACKAGE_python-vobject is not set # CONFIG_PACKAGE_python-vobject-src is not set # CONFIG_PACKAGE_python-voluptuous is not set # CONFIG_PACKAGE_python-voluptuous-src is not set # CONFIG_PACKAGE_python-xml is not set # CONFIG_PACKAGE_python-xml-src is not set # CONFIG_PACKAGE_python-yaml is not set # CONFIG_PACKAGE_python-yaml-src is not set # CONFIG_PACKAGE_python-zope-interface is not set # CONFIG_PACKAGE_python-zope-interface-src is not set # CONFIG_PACKAGE_python3 is not set # CONFIG_PACKAGE_python3-aiohttp is not set # CONFIG_PACKAGE_python3-aiohttp-cors is not set # CONFIG_PACKAGE_python3-aiohttp-cors-src is not set # CONFIG_PACKAGE_python3-aiohttp-src is not set # CONFIG_PACKAGE_python3-appdirs is not set # CONFIG_PACKAGE_python3-appdirs-src is not set # CONFIG_PACKAGE_python3-asgiref is not set # CONFIG_PACKAGE_python3-asgiref-src is not set # CONFIG_PACKAGE_python3-asn1crypto is not set # CONFIG_PACKAGE_python3-asn1crypto-src is not set # CONFIG_PACKAGE_python3-astral is not set # CONFIG_PACKAGE_python3-astral-src is not set # CONFIG_PACKAGE_python3-async-timeout is not set # CONFIG_PACKAGE_python3-async-timeout-src is not set # CONFIG_PACKAGE_python3-asyncio is not set # CONFIG_PACKAGE_python3-asyncio-src is not set # CONFIG_PACKAGE_python3-atomicwrites is not set # CONFIG_PACKAGE_python3-atomicwrites-src is not set # CONFIG_PACKAGE_python3-attrs is not set # CONFIG_PACKAGE_python3-attrs-src is not set # CONFIG_PACKAGE_python3-automat is not set # CONFIG_PACKAGE_python3-automat-src is not set # CONFIG_PACKAGE_python3-awscli is not set # CONFIG_PACKAGE_python3-awscli-src is not set # CONFIG_PACKAGE_python3-base is not set # CONFIG_PACKAGE_python3-base-src is not set # CONFIG_PACKAGE_python3-bcrypt is not set # CONFIG_PACKAGE_python3-bcrypt-src is not set # CONFIG_PACKAGE_python3-boto3 is not set # CONFIG_PACKAGE_python3-boto3-src is not set # CONFIG_PACKAGE_python3-botocore is not set # CONFIG_PACKAGE_python3-botocore-src is not set # CONFIG_PACKAGE_python3-bottle is not set # CONFIG_PACKAGE_python3-bottle-src is not set # CONFIG_PACKAGE_python3-cachelib is not set # CONFIG_PACKAGE_python3-cachelib-src is not set # CONFIG_PACKAGE_python3-cachetools is not set # CONFIG_PACKAGE_python3-cachetools-src is not set # CONFIG_PACKAGE_python3-certifi is not set # CONFIG_PACKAGE_python3-certifi-src is not set # CONFIG_PACKAGE_python3-cffi is not set # CONFIG_PACKAGE_python3-cffi-src is not set # CONFIG_PACKAGE_python3-cgi is not set # CONFIG_PACKAGE_python3-cgi-src is not set # CONFIG_PACKAGE_python3-cgitb is not set # CONFIG_PACKAGE_python3-cgitb-src is not set # CONFIG_PACKAGE_python3-chardet is not set # CONFIG_PACKAGE_python3-chardet-src is not set # CONFIG_PACKAGE_python3-click is not set # CONFIG_PACKAGE_python3-click-log is not set # CONFIG_PACKAGE_python3-click-log-src is not set # CONFIG_PACKAGE_python3-click-src is not set # CONFIG_PACKAGE_python3-codecs is not set # CONFIG_PACKAGE_python3-codecs-src is not set # CONFIG_PACKAGE_python3-colorama is not set # CONFIG_PACKAGE_python3-colorama-src is not set # CONFIG_PACKAGE_python3-constantly is not set # CONFIG_PACKAGE_python3-constantly-src is not set # CONFIG_PACKAGE_python3-contextlib2 is not set # CONFIG_PACKAGE_python3-contextlib2-src is not set # CONFIG_PACKAGE_python3-crypto is not set # CONFIG_PACKAGE_python3-crypto-src is not set # CONFIG_PACKAGE_python3-cryptodome is not set # CONFIG_PACKAGE_python3-cryptodome-src is not set # CONFIG_PACKAGE_python3-cryptodomex is not set # CONFIG_PACKAGE_python3-cryptodomex-src is not set # CONFIG_PACKAGE_python3-cryptography is not set # CONFIG_PACKAGE_python3-cryptography-src is not set # CONFIG_PACKAGE_python3-ctypes is not set # CONFIG_PACKAGE_python3-ctypes-src is not set # CONFIG_PACKAGE_python3-curl is not set # CONFIG_PACKAGE_python3-curl-src is not set # CONFIG_PACKAGE_python3-dateutil is not set # CONFIG_PACKAGE_python3-dateutil-src is not set # CONFIG_PACKAGE_python3-dbm is not set # CONFIG_PACKAGE_python3-dbm-src is not set # CONFIG_PACKAGE_python3-decimal is not set # CONFIG_PACKAGE_python3-decimal-src is not set # CONFIG_PACKAGE_python3-decorator is not set # CONFIG_PACKAGE_python3-decorator-src is not set # CONFIG_PACKAGE_python3-defusedxml is not set # CONFIG_PACKAGE_python3-defusedxml-src is not set # CONFIG_PACKAGE_python3-dev is not set # CONFIG_PACKAGE_python3-dev-src is not set # CONFIG_PACKAGE_python3-distutils is not set # CONFIG_PACKAGE_python3-distutils-src is not set # CONFIG_PACKAGE_python3-django is not set # CONFIG_PACKAGE_python3-django-appconf is not set # CONFIG_PACKAGE_python3-django-appconf-src is not set # CONFIG_PACKAGE_python3-django-compressor is not set # CONFIG_PACKAGE_python3-django-compressor-src is not set # CONFIG_PACKAGE_python3-django-constance is not set # CONFIG_PACKAGE_python3-django-constance-src is not set # CONFIG_PACKAGE_python3-django-cors-headers is not set # CONFIG_PACKAGE_python3-django-cors-headers-src is not set # CONFIG_PACKAGE_python3-django-etesync-journal is not set # CONFIG_PACKAGE_python3-django-etesync-journal-src is not set # CONFIG_PACKAGE_python3-django-formtools is not set # CONFIG_PACKAGE_python3-django-formtools-src is not set # CONFIG_PACKAGE_python3-django-jsonfield is not set # CONFIG_PACKAGE_python3-django-jsonfield-src is not set # CONFIG_PACKAGE_python3-django-picklefield is not set # CONFIG_PACKAGE_python3-django-picklefield-src is not set # CONFIG_PACKAGE_python3-django-postoffice is not set # CONFIG_PACKAGE_python3-django-postoffice-src is not set # CONFIG_PACKAGE_python3-django-ranged-response is not set # CONFIG_PACKAGE_python3-django-ranged-response-src is not set # CONFIG_PACKAGE_python3-django-restframework is not set # CONFIG_PACKAGE_python3-django-restframework-src is not set # CONFIG_PACKAGE_python3-django-restframework39 is not set # CONFIG_PACKAGE_python3-django-restframework39-src is not set # CONFIG_PACKAGE_python3-django-simple-captcha is not set # CONFIG_PACKAGE_python3-django-simple-captcha-src is not set # CONFIG_PACKAGE_python3-django-src is not set # CONFIG_PACKAGE_python3-django-statici18n is not set # CONFIG_PACKAGE_python3-django-statici18n-src is not set # CONFIG_PACKAGE_python3-django-webpack-loader is not set # CONFIG_PACKAGE_python3-django-webpack-loader-src is not set # CONFIG_PACKAGE_python3-django1 is not set # CONFIG_PACKAGE_python3-django1-src is not set # CONFIG_PACKAGE_python3-dns is not set # CONFIG_PACKAGE_python3-dns-src is not set # CONFIG_PACKAGE_python3-docutils is not set # CONFIG_PACKAGE_python3-docutils-src is not set # CONFIG_PACKAGE_python3-drf-nested-routers is not set # CONFIG_PACKAGE_python3-drf-nested-routers-src is not set # CONFIG_PACKAGE_python3-email is not set # CONFIG_PACKAGE_python3-email-src is not set # CONFIG_PACKAGE_python3-et_xmlfile is not set # CONFIG_PACKAGE_python3-et_xmlfile-src is not set # CONFIG_PACKAGE_python3-evdev is not set # CONFIG_PACKAGE_python3-evdev-src is not set # CONFIG_PACKAGE_python3-flask is not set # CONFIG_PACKAGE_python3-flask-login is not set # CONFIG_PACKAGE_python3-flask-login-src is not set # CONFIG_PACKAGE_python3-flask-src is not set # CONFIG_PACKAGE_python3-flup is not set # CONFIG_PACKAGE_python3-flup-src is not set # CONFIG_PACKAGE_python3-gdbm is not set # CONFIG_PACKAGE_python3-gdbm-src is not set # CONFIG_PACKAGE_python3-gmpy2 is not set # CONFIG_PACKAGE_python3-gmpy2-src is not set # CONFIG_PACKAGE_python3-gnupg is not set # CONFIG_PACKAGE_python3-gunicorn is not set # CONFIG_PACKAGE_python3-gunicorn-src is not set # CONFIG_PACKAGE_python3-hyperlink is not set # CONFIG_PACKAGE_python3-hyperlink-src is not set # CONFIG_PACKAGE_python3-idna is not set # CONFIG_PACKAGE_python3-idna-src is not set # CONFIG_PACKAGE_python3-ifaddr is not set # CONFIG_PACKAGE_python3-ifaddr-src is not set # CONFIG_PACKAGE_python3-incremental is not set # CONFIG_PACKAGE_python3-incremental-src is not set # CONFIG_PACKAGE_python3-influxdb is not set # CONFIG_PACKAGE_python3-influxdb-src is not set # CONFIG_PACKAGE_python3-intelhex is not set # CONFIG_PACKAGE_python3-intelhex-src is not set # CONFIG_PACKAGE_python3-itsdangerous is not set # CONFIG_PACKAGE_python3-itsdangerous-src is not set # CONFIG_PACKAGE_python3-jdcal is not set # CONFIG_PACKAGE_python3-jdcal-src is not set # CONFIG_PACKAGE_python3-jinja2 is not set # CONFIG_PACKAGE_python3-jinja2-src is not set # CONFIG_PACKAGE_python3-jmespath is not set # CONFIG_PACKAGE_python3-jmespath-src is not set # CONFIG_PACKAGE_python3-jsonpath-ng is not set # CONFIG_PACKAGE_python3-jsonpath-ng-src is not set # CONFIG_PACKAGE_python3-lib2to3 is not set # CONFIG_PACKAGE_python3-lib2to3-src is not set # CONFIG_PACKAGE_python3-libmodbus is not set # CONFIG_PACKAGE_python3-light is not set # # Configuration # # CONFIG_PYTHON3_BLUETOOTH_SUPPORT is not set # CONFIG_PACKAGE_python3-light-src is not set # CONFIG_PACKAGE_python3-logging is not set # CONFIG_PACKAGE_python3-logging-src is not set # CONFIG_PACKAGE_python3-lxml is not set # CONFIG_PACKAGE_python3-lxml-src is not set # CONFIG_PACKAGE_python3-lzma is not set # CONFIG_PACKAGE_python3-lzma-src is not set # CONFIG_PACKAGE_python3-markdown is not set # CONFIG_PACKAGE_python3-markdown-src is not set # CONFIG_PACKAGE_python3-markupsafe is not set # CONFIG_PACKAGE_python3-markupsafe-src is not set # CONFIG_PACKAGE_python3-maxminddb is not set # CONFIG_PACKAGE_python3-maxminddb-src is not set # CONFIG_PACKAGE_python3-more-itertools is not set # CONFIG_PACKAGE_python3-more-itertools-src is not set # CONFIG_PACKAGE_python3-multidict is not set # CONFIG_PACKAGE_python3-multidict-src is not set # CONFIG_PACKAGE_python3-multiprocessing is not set # CONFIG_PACKAGE_python3-multiprocessing-src is not set # CONFIG_PACKAGE_python3-mysqlclient is not set # CONFIG_PACKAGE_python3-mysqlclient-src is not set # CONFIG_PACKAGE_python3-ncurses is not set # CONFIG_PACKAGE_python3-ncurses-src is not set # CONFIG_PACKAGE_python3-netdisco is not set # CONFIG_PACKAGE_python3-netdisco-src is not set # CONFIG_PACKAGE_python3-netifaces is not set # CONFIG_PACKAGE_python3-netifaces-src is not set # CONFIG_PACKAGE_python3-oauthlib is not set # CONFIG_PACKAGE_python3-oauthlib-src is not set # CONFIG_PACKAGE_python3-openpyxl is not set # CONFIG_PACKAGE_python3-openpyxl-src is not set # CONFIG_PACKAGE_python3-openssl is not set # CONFIG_PACKAGE_python3-openssl-src is not set # CONFIG_PACKAGE_python3-paho-mqtt is not set # CONFIG_PACKAGE_python3-paho-mqtt-src is not set # CONFIG_PACKAGE_python3-parsley is not set # CONFIG_PACKAGE_python3-parsley-src is not set # CONFIG_PACKAGE_python3-passlib is not set # CONFIG_PACKAGE_python3-passlib-src is not set # CONFIG_PACKAGE_python3-pillow is not set # CONFIG_PACKAGE_python3-pillow-src is not set # CONFIG_PACKAGE_python3-pip is not set # CONFIG_PACKAGE_python3-pip-src is not set # CONFIG_PACKAGE_python3-pkg-resources is not set # CONFIG_PACKAGE_python3-pkg-resources-src is not set # CONFIG_PACKAGE_python3-ply is not set # CONFIG_PACKAGE_python3-ply-src is not set # CONFIG_PACKAGE_python3-py is not set # CONFIG_PACKAGE_python3-py-src is not set # CONFIG_PACKAGE_python3-pyasn1 is not set # CONFIG_PACKAGE_python3-pyasn1-modules is not set # CONFIG_PACKAGE_python3-pyasn1-modules-src is not set # CONFIG_PACKAGE_python3-pyasn1-src is not set # CONFIG_PACKAGE_python3-pycparser is not set # CONFIG_PACKAGE_python3-pycparser-src is not set # CONFIG_PACKAGE_python3-pydoc is not set # CONFIG_PACKAGE_python3-pydoc-src is not set # CONFIG_PACKAGE_python3-pyjwt is not set # CONFIG_PACKAGE_python3-pyjwt-src is not set # CONFIG_PACKAGE_python3-pymysql is not set # CONFIG_PACKAGE_python3-pymysql-src is not set # CONFIG_PACKAGE_python3-pyodbc is not set # CONFIG_PACKAGE_python3-pyopenssl is not set # CONFIG_PACKAGE_python3-pyopenssl-src is not set # CONFIG_PACKAGE_python3-pyotp is not set # CONFIG_PACKAGE_python3-pyotp-src is not set # CONFIG_PACKAGE_python3-pyparsing is not set # CONFIG_PACKAGE_python3-pyparsing-src is not set # CONFIG_PACKAGE_python3-pyroute2 is not set # CONFIG_PACKAGE_python3-pyroute2-src is not set # CONFIG_PACKAGE_python3-pyrsistent is not set # CONFIG_PACKAGE_python3-pyrsistent-src is not set # CONFIG_PACKAGE_python3-pyserial is not set # CONFIG_PACKAGE_python3-pyserial-src is not set # CONFIG_PACKAGE_python3-pytz is not set # CONFIG_PACKAGE_python3-pytz-src is not set # CONFIG_PACKAGE_python3-qrcode is not set # CONFIG_PACKAGE_python3-qrcode-src is not set # CONFIG_PACKAGE_python3-rcssmin is not set # CONFIG_PACKAGE_python3-rcssmin-src is not set # CONFIG_PACKAGE_python3-requests is not set # CONFIG_PACKAGE_python3-requests-oauthlib is not set # CONFIG_PACKAGE_python3-requests-oauthlib-src is not set # CONFIG_PACKAGE_python3-requests-src is not set # CONFIG_PACKAGE_python3-rsa is not set # CONFIG_PACKAGE_python3-rsa-src is not set # CONFIG_PACKAGE_python3-ruamel-yaml is not set # CONFIG_PACKAGE_python3-ruamel-yaml-src is not set # CONFIG_PACKAGE_python3-s3transfer is not set # CONFIG_PACKAGE_python3-s3transfer-src is not set # CONFIG_PACKAGE_python3-schedule is not set # CONFIG_PACKAGE_python3-schedule-src is not set # CONFIG_PACKAGE_python3-schema is not set # CONFIG_PACKAGE_python3-schema-src is not set # CONFIG_PACKAGE_python3-seafile-ccnet is not set # CONFIG_PACKAGE_python3-seafile-ccnet-src is not set # CONFIG_PACKAGE_python3-seafile-server is not set # CONFIG_PACKAGE_python3-seafile-server-src is not set # CONFIG_PACKAGE_python3-searpc is not set # CONFIG_PACKAGE_python3-searpc-src is not set # CONFIG_PACKAGE_python3-sentry-sdk is not set # CONFIG_PACKAGE_python3-sentry-sdk-src is not set # CONFIG_PACKAGE_python3-service-identity is not set # CONFIG_PACKAGE_python3-service-identity-src is not set # CONFIG_PACKAGE_python3-setuptools is not set # CONFIG_PACKAGE_python3-setuptools-src is not set # CONFIG_PACKAGE_python3-simplejson is not set # CONFIG_PACKAGE_python3-simplejson-src is not set # CONFIG_PACKAGE_python3-six is not set # CONFIG_PACKAGE_python3-six-src is not set # CONFIG_PACKAGE_python3-slugify is not set # CONFIG_PACKAGE_python3-slugify-src is not set # CONFIG_PACKAGE_python3-smbus is not set # CONFIG_PACKAGE_python3-speedtest-cli is not set # CONFIG_PACKAGE_python3-speedtest-cli-src is not set # CONFIG_PACKAGE_python3-sqlalchemy is not set # CONFIG_PACKAGE_python3-sqlalchemy-src is not set # CONFIG_PACKAGE_python3-sqlite3 is not set # CONFIG_PACKAGE_python3-sqlite3-src is not set # CONFIG_PACKAGE_python3-sqlparse is not set # CONFIG_PACKAGE_python3-sqlparse-src is not set # CONFIG_PACKAGE_python3-stem is not set # CONFIG_PACKAGE_python3-stem-src is not set # CONFIG_PACKAGE_python3-text-unidecode is not set # CONFIG_PACKAGE_python3-text-unidecode-src is not set # CONFIG_PACKAGE_python3-twisted is not set # CONFIG_PACKAGE_python3-twisted-src is not set # CONFIG_PACKAGE_python3-unidecode is not set # CONFIG_PACKAGE_python3-unidecode-src is not set # CONFIG_PACKAGE_python3-unittest is not set # CONFIG_PACKAGE_python3-unittest-src is not set # CONFIG_PACKAGE_python3-urllib is not set # CONFIG_PACKAGE_python3-urllib-src is not set # CONFIG_PACKAGE_python3-urllib3 is not set # CONFIG_PACKAGE_python3-urllib3-src is not set # CONFIG_PACKAGE_python3-vobject is not set # CONFIG_PACKAGE_python3-vobject-src is not set # CONFIG_PACKAGE_python3-voluptuous is not set # CONFIG_PACKAGE_python3-voluptuous-serialize is not set # CONFIG_PACKAGE_python3-voluptuous-serialize-src is not set # CONFIG_PACKAGE_python3-voluptuous-src is not set # CONFIG_PACKAGE_python3-wcwidth is not set # CONFIG_PACKAGE_python3-wcwidth-src is not set # CONFIG_PACKAGE_python3-werkzeug is not set # CONFIG_PACKAGE_python3-werkzeug-src is not set # CONFIG_PACKAGE_python3-xml is not set # CONFIG_PACKAGE_python3-xml-src is not set # CONFIG_PACKAGE_python3-xmltodict is not set # CONFIG_PACKAGE_python3-xmltodict-src is not set # CONFIG_PACKAGE_python3-yaml is not set # CONFIG_PACKAGE_python3-yaml-src is not set # CONFIG_PACKAGE_python3-yarl is not set # CONFIG_PACKAGE_python3-yarl-src is not set # CONFIG_PACKAGE_python3-zeroconf is not set # CONFIG_PACKAGE_python3-zeroconf-src is not set # CONFIG_PACKAGE_python3-zipp is not set # CONFIG_PACKAGE_python3-zipp-src is not set # CONFIG_PACKAGE_python3-zope-interface is not set # CONFIG_PACKAGE_python3-zope-interface-src is not set # # Ruby # # CONFIG_PACKAGE_ruby is not set # # Tcl # # CONFIG_PACKAGE_vala is not set # # Libraries # # # Compression # # CONFIG_PACKAGE_libbz2 is not set # CONFIG_PACKAGE_liblzma is not set # CONFIG_PACKAGE_libunrar is not set # CONFIG_PACKAGE_libzstd is not set CONFIG_ZSTD_OPTIMIZE_O3=y # # Filesystem # # CONFIG_PACKAGE_libacl is not set # CONFIG_PACKAGE_libattr is not set # CONFIG_PACKAGE_libfuse is not set # CONFIG_PACKAGE_libow is not set # CONFIG_PACKAGE_libow-capi is not set # CONFIG_PACKAGE_libsysfs is not set # # Firewall # # CONFIG_PACKAGE_libfko is not set CONFIG_PACKAGE_libip4tc=y CONFIG_PACKAGE_libip6tc=y CONFIG_PACKAGE_libxtables=y # CONFIG_PACKAGE_libxtables-nft is not set # # Instant Messaging # # CONFIG_PACKAGE_quasselc is not set # # IoT # # CONFIG_PACKAGE_libupm is not set # CONFIG_PACKAGE_libupm-a110x is not set # CONFIG_PACKAGE_libupm-ad8232 is not set # CONFIG_PACKAGE_libupm-adafruitss is not set # CONFIG_PACKAGE_libupm-adc121c021 is not set # CONFIG_PACKAGE_libupm-adis16448 is not set # CONFIG_PACKAGE_libupm-adxl335 is not set # CONFIG_PACKAGE_libupm-adxl345 is not set # CONFIG_PACKAGE_libupm-am2315 is not set # CONFIG_PACKAGE_libupm-apds9002 is not set # CONFIG_PACKAGE_libupm-at42qt1070 is not set # CONFIG_PACKAGE_libupm-biss0001 is not set # CONFIG_PACKAGE_libupm-bmpx8x is not set # CONFIG_PACKAGE_libupm-buzzer is not set # CONFIG_PACKAGE_libupm-cjq4435 is not set # CONFIG_PACKAGE_libupm-ds1307 is not set # CONFIG_PACKAGE_libupm-ecs1030 is not set # CONFIG_PACKAGE_libupm-enc03r is not set # CONFIG_PACKAGE_libupm-flex is not set # CONFIG_PACKAGE_libupm-gas is not set # CONFIG_PACKAGE_libupm-gp2y0a is not set # CONFIG_PACKAGE_libupm-grove is not set # CONFIG_PACKAGE_libupm-grovecircularled is not set # CONFIG_PACKAGE_libupm-grovecollision is not set # CONFIG_PACKAGE_libupm-groveehr is not set # CONFIG_PACKAGE_libupm-groveeldriver is not set # CONFIG_PACKAGE_libupm-groveelectromagnet is not set # CONFIG_PACKAGE_libupm-groveemg is not set # CONFIG_PACKAGE_libupm-grovegprs is not set # CONFIG_PACKAGE_libupm-grovegsr is not set # CONFIG_PACKAGE_libupm-grovelinefinder is not set # CONFIG_PACKAGE_libupm-grovemd is not set # CONFIG_PACKAGE_libupm-grovemoisture is not set # CONFIG_PACKAGE_libupm-groveo2 is not set # CONFIG_PACKAGE_libupm-grovescam is not set # CONFIG_PACKAGE_libupm-grovespeaker is not set # CONFIG_PACKAGE_libupm-grovevdiv is not set # CONFIG_PACKAGE_libupm-grovewater is not set # CONFIG_PACKAGE_libupm-grovewfs is not set # CONFIG_PACKAGE_libupm-guvas12d is not set # CONFIG_PACKAGE_libupm-h3lis331dl is not set # CONFIG_PACKAGE_libupm-hcsr04 is not set # CONFIG_PACKAGE_libupm-hm11 is not set # CONFIG_PACKAGE_libupm-hmc5883l is not set # CONFIG_PACKAGE_libupm-hmtrp is not set # CONFIG_PACKAGE_libupm-hp20x is not set # CONFIG_PACKAGE_libupm-ht9170 is not set # CONFIG_PACKAGE_libupm-htu21d is not set # CONFIG_PACKAGE_libupm-hx711 is not set # CONFIG_PACKAGE_libupm-i2clcd is not set # CONFIG_PACKAGE_libupm-ina132 is not set # CONFIG_PACKAGE_libupm-isd1820 is not set # CONFIG_PACKAGE_libupm-itg3200 is not set # CONFIG_PACKAGE_libupm-joystick12 is not set # CONFIG_PACKAGE_libupm-l298 is not set # CONFIG_PACKAGE_libupm-ldt0028 is not set # CONFIG_PACKAGE_libupm-lm35 is not set # CONFIG_PACKAGE_libupm-lol is not set # CONFIG_PACKAGE_libupm-loudness is not set # CONFIG_PACKAGE_libupm-lpd8806 is not set # CONFIG_PACKAGE_libupm-lsm303 is not set # CONFIG_PACKAGE_libupm-lsm9ds0 is not set # CONFIG_PACKAGE_libupm-m24lr64e is not set # CONFIG_PACKAGE_libupm-max31723 is not set # CONFIG_PACKAGE_libupm-max31855 is not set # CONFIG_PACKAGE_libupm-max44000 is not set # CONFIG_PACKAGE_libupm-max5487 is not set # CONFIG_PACKAGE_libupm-maxds3231m is not set # CONFIG_PACKAGE_libupm-maxsonarez is not set # CONFIG_PACKAGE_libupm-mg811 is not set # CONFIG_PACKAGE_libupm-mhz16 is not set # CONFIG_PACKAGE_libupm-mic is not set # CONFIG_PACKAGE_libupm-mlx90614 is not set # CONFIG_PACKAGE_libupm-mma7455 is not set # CONFIG_PACKAGE_libupm-mma7660 is not set # CONFIG_PACKAGE_libupm-mpl3115a2 is not set # CONFIG_PACKAGE_libupm-mpr121 is not set # CONFIG_PACKAGE_libupm-mpu9150 is not set # CONFIG_PACKAGE_libupm-mq303a is not set # CONFIG_PACKAGE_libupm-my9221 is not set # CONFIG_PACKAGE_libupm-nrf24l01 is not set # CONFIG_PACKAGE_libupm-nrf8001 is not set # CONFIG_PACKAGE_libupm-nunchuck is not set # CONFIG_PACKAGE_libupm-otp538u is not set # CONFIG_PACKAGE_libupm-pn532 is not set # CONFIG_PACKAGE_libupm-ppd42ns is not set # CONFIG_PACKAGE_libupm-pulsensor is not set # CONFIG_PACKAGE_libupm-rfr359f is not set # CONFIG_PACKAGE_libupm-rgbringcoder is not set # CONFIG_PACKAGE_libupm-rotaryencoder is not set # CONFIG_PACKAGE_libupm-rpr220 is not set # CONFIG_PACKAGE_libupm-servo is not set # CONFIG_PACKAGE_libupm-si114x is not set # CONFIG_PACKAGE_libupm-sm130 is not set # CONFIG_PACKAGE_libupm-st7735 is not set # CONFIG_PACKAGE_libupm-stepmotor is not set # CONFIG_PACKAGE_libupm-sx6119 is not set # CONFIG_PACKAGE_libupm-ta12200 is not set # CONFIG_PACKAGE_libupm-tcs3414cs is not set # CONFIG_PACKAGE_libupm-th02 is not set # CONFIG_PACKAGE_libupm-tm1637 is not set # CONFIG_PACKAGE_libupm-tsl2561 is not set # CONFIG_PACKAGE_libupm-ttp223 is not set # CONFIG_PACKAGE_libupm-ublox6 is not set # CONFIG_PACKAGE_libupm-uln200xa is not set # CONFIG_PACKAGE_libupm-waterlevel is not set # CONFIG_PACKAGE_libupm-wheelencoder is not set # CONFIG_PACKAGE_libupm-wt5001 is not set # CONFIG_PACKAGE_libupm-yg1006 is not set # CONFIG_PACKAGE_libupm-zfm20 is not set # # Languages # # CONFIG_PACKAGE_libyaml is not set # # Networking # # CONFIG_PACKAGE_libdcwproto is not set # CONFIG_PACKAGE_libdcwsocket is not set # CONFIG_PACKAGE_libsctp is not set # CONFIG_PACKAGE_libuhttpd-mbedtls is not set # CONFIG_PACKAGE_libuhttpd-nossl is not set # CONFIG_PACKAGE_libuhttpd-openssl is not set # CONFIG_PACKAGE_libuhttpd-wolfssl is not set # CONFIG_PACKAGE_libunbound is not set # CONFIG_PACKAGE_libunbound-heavy is not set # CONFIG_PACKAGE_libuwsc-mbedtls is not set # CONFIG_PACKAGE_libuwsc-nossl is not set # CONFIG_PACKAGE_libuwsc-openssl is not set # CONFIG_PACKAGE_libuwsc-wolfssl is not set # # Qt5 # # CONFIG_PACKAGE_qt5-core is not set # CONFIG_PACKAGE_qt5-network is not set # CONFIG_PACKAGE_qt5-xml is not set # # SSL # # CONFIG_PACKAGE_libgnutls is not set # CONFIG_PACKAGE_libmbedtls is not set CONFIG_PACKAGE_libopenssl=y # # Build Options # CONFIG_OPENSSL_OPTIMIZE_SPEED=y CONFIG_OPENSSL_WITH_ASM=y CONFIG_OPENSSL_WITH_DEPRECATED=y # CONFIG_OPENSSL_NO_DEPRECATED is not set # CONFIG_OPENSSL_WITH_ERROR_MESSAGES is not set # # Protocol Support # CONFIG_OPENSSL_WITH_TLS13=y # CONFIG_OPENSSL_WITH_DTLS is not set # CONFIG_OPENSSL_WITH_NPN is not set CONFIG_OPENSSL_WITH_SRP=y CONFIG_OPENSSL_WITH_CMS=y # # Algorithm Selection # # CONFIG_OPENSSL_WITH_EC2M is not set CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM=y CONFIG_OPENSSL_WITH_PSK=y # # Less commonly used build options # # CONFIG_OPENSSL_WITH_ARIA is not set # CONFIG_OPENSSL_WITH_CAMELLIA is not set # CONFIG_OPENSSL_WITH_IDEA is not set # CONFIG_OPENSSL_WITH_SEED is not set # CONFIG_OPENSSL_WITH_SM234 is not set # CONFIG_OPENSSL_WITH_BLAKE2 is not set # CONFIG_OPENSSL_WITH_MDC2 is not set # CONFIG_OPENSSL_WITH_WHIRLPOOL is not set # CONFIG_OPENSSL_WITH_COMPRESSION is not set # CONFIG_OPENSSL_WITH_RFC3779 is not set # # Engine/Hardware Support # CONFIG_OPENSSL_ENGINE=y CONFIG_OPENSSL_ENGINE_BUILTIN=y CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO=y # CONFIG_OPENSSL_WITH_GOST is not set CONFIG_PACKAGE_libopenssl-conf=y # CONFIG_PACKAGE_libopenssl-devcrypto is not set # CONFIG_PACKAGE_libpolarssl is not set # CONFIG_PACKAGE_libwolfssl is not set # # Sound # # CONFIG_PACKAGE_liblo is not set # # database # # CONFIG_PACKAGE_libpq is not set # CONFIG_PACKAGE_libsqlite3 is not set # CONFIG_PACKAGE_pgsqlodbc is not set # CONFIG_PACKAGE_psqlodbca is not set # CONFIG_PACKAGE_psqlodbcw is not set # CONFIG_PACKAGE_tdb is not set # CONFIG_PACKAGE_unixodbc is not set # # libelektra # # CONFIG_PACKAGE_libelektra-boost is not set # CONFIG_PACKAGE_libelektra-core is not set # CONFIG_PACKAGE_libelektra-cpp is not set # CONFIG_PACKAGE_libelektra-crypto is not set # CONFIG_PACKAGE_libelektra-curlget is not set # CONFIG_PACKAGE_libelektra-dbus is not set # CONFIG_PACKAGE_libelektra-extra is not set # CONFIG_PACKAGE_libelektra-lua is not set # CONFIG_PACKAGE_libelektra-plugins is not set # CONFIG_PACKAGE_libelektra-python2 is not set # CONFIG_PACKAGE_libelektra-python3 is not set # CONFIG_PACKAGE_libelektra-resolvers is not set # CONFIG_PACKAGE_libelektra-xerces is not set # CONFIG_PACKAGE_libelektra-xml is not set # CONFIG_PACKAGE_libelektra-yajl is not set # CONFIG_PACKAGE_libelektra-yamlcpp is not set # CONFIG_PACKAGE_alsa-lib is not set # CONFIG_PACKAGE_argp-standalone is not set # CONFIG_PACKAGE_avro-c is not set # CONFIG_PACKAGE_bind-libs is not set # CONFIG_PACKAGE_bluez-libs is not set # CONFIG_PACKAGE_boost is not set # CONFIG_boost-context-exclude is not set # CONFIG_boost-coroutine-exclude is not set # CONFIG_boost-fiber-exclude is not set # CONFIG_PACKAGE_ccid is not set # CONFIG_PACKAGE_check is not set # CONFIG_PACKAGE_classpath is not set # CONFIG_PACKAGE_classpath-tools is not set # CONFIG_PACKAGE_confuse is not set # CONFIG_PACKAGE_dtndht is not set # CONFIG_PACKAGE_fcgi is not set # CONFIG_PACKAGE_fftw3 is not set # CONFIG_PACKAGE_fftw3f is not set # CONFIG_PACKAGE_getdns is not set # CONFIG_PACKAGE_giflib is not set # CONFIG_PACKAGE_glib2 is not set # CONFIG_PACKAGE_glog is not set # CONFIG_PACKAGE_hidapi is not set # CONFIG_PACKAGE_ibrcommon is not set # CONFIG_PACKAGE_ibrdtn is not set # CONFIG_PACKAGE_icu is not set # CONFIG_PACKAGE_icu-data-tools is not set # CONFIG_PACKAGE_icu-full-data is not set # CONFIG_PACKAGE_jansson is not set # CONFIG_PACKAGE_knot-libs is not set # CONFIG_PACKAGE_knot-libzscanner is not set # CONFIG_PACKAGE_libaio is not set # CONFIG_PACKAGE_libalac is not set # CONFIG_PACKAGE_libantlr3c is not set # CONFIG_PACKAGE_libao is not set # CONFIG_PACKAGE_libapr is not set # CONFIG_PACKAGE_libaprutil is not set # CONFIG_PACKAGE_libarchive is not set # CONFIG_PACKAGE_libarchive-noopenssl is not set # CONFIG_PACKAGE_libartnet is not set # CONFIG_PACKAGE_libasm is not set # CONFIG_PACKAGE_libaudiofile is not set # CONFIG_PACKAGE_libavahi-client is not set # CONFIG_PACKAGE_libavahi-compat-libdnssd is not set # CONFIG_PACKAGE_libavahi-dbus-support is not set # CONFIG_PACKAGE_libavahi-nodbus-support is not set # CONFIG_PACKAGE_libavl is not set # CONFIG_PACKAGE_libbfd is not set # CONFIG_PACKAGE_libblkid is not set CONFIG_PACKAGE_libblobmsg-json=y # CONFIG_PACKAGE_libbsd is not set # CONFIG_PACKAGE_libcanfestival is not set # CONFIG_PACKAGE_libcap is not set # CONFIG_PACKAGE_libcares is not set # CONFIG_PACKAGE_libcharset is not set # CONFIG_PACKAGE_libcoap is not set # CONFIG_PACKAGE_libcomerr is not set # CONFIG_PACKAGE_libconfig is not set # CONFIG_PACKAGE_libcryptopp is not set # CONFIG_PACKAGE_libcurl is not set # CONFIG_PACKAGE_libcxx is not set # CONFIG_PACKAGE_libdaemon is not set # CONFIG_PACKAGE_libdaq is not set # CONFIG_PACKAGE_libdb47 is not set # CONFIG_PACKAGE_libdb47xx is not set # CONFIG_PACKAGE_libdbi is not set # CONFIG_PACKAGE_libdbus is not set # CONFIG_PACKAGE_libdevmapper is not set # CONFIG_PACKAGE_libdmapsharing is not set # CONFIG_PACKAGE_libdnet is not set # CONFIG_PACKAGE_libdouble-conversion is not set # CONFIG_PACKAGE_libdrm is not set # CONFIG_PACKAGE_libdw is not set # CONFIG_PACKAGE_libecdsautil is not set # CONFIG_PACKAGE_libedit is not set CONFIG_PACKAGE_libelf=y # CONFIG_PACKAGE_libesmtp is not set # CONFIG_PACKAGE_libestr is not set # CONFIG_PACKAGE_libev is not set # CONFIG_PACKAGE_libevdev is not set # CONFIG_PACKAGE_libevent2 is not set # CONFIG_PACKAGE_libevent2-core is not set # CONFIG_PACKAGE_libevent2-extra is not set # CONFIG_PACKAGE_libevent2-openssl is not set # CONFIG_PACKAGE_libevent2-pthreads is not set # CONFIG_PACKAGE_libeventlog is not set # CONFIG_PACKAGE_libevhtp is not set # CONFIG_PACKAGE_libexif is not set # CONFIG_PACKAGE_libexpat is not set # CONFIG_PACKAGE_libexslt is not set # CONFIG_PACKAGE_libext2fs is not set # CONFIG_PACKAGE_libextractor is not set # CONFIG_PACKAGE_libf2fs is not set # CONFIG_PACKAGE_libfaad2 is not set # CONFIG_PACKAGE_libfastjson is not set # CONFIG_PACKAGE_libfdisk is not set # CONFIG_PACKAGE_libfdt is not set # CONFIG_PACKAGE_libffi is not set # CONFIG_PACKAGE_libffmpeg-audio-dec is not set # CONFIG_PACKAGE_libffmpeg-custom is not set # CONFIG_PACKAGE_libffmpeg-full is not set # CONFIG_PACKAGE_libffmpeg-mini is not set # CONFIG_PACKAGE_libflac is not set # CONFIG_PACKAGE_libfmt is not set # CONFIG_PACKAGE_libfreetype is not set # CONFIG_PACKAGE_libftdi is not set # CONFIG_PACKAGE_libftdi1 is not set # CONFIG_PACKAGE_libgcrypt is not set # CONFIG_PACKAGE_libgd is not set # CONFIG_PACKAGE_libgdbm is not set # CONFIG_PACKAGE_libgee is not set # CONFIG_PACKAGE_libglpk is not set # CONFIG_PACKAGE_libgmp is not set # CONFIG_PACKAGE_libgnurl is not set # CONFIG_PACKAGE_libgpg-error is not set # CONFIG_PACKAGE_libgphoto2 is not set # CONFIG_PACKAGE_libgpiod is not set # CONFIG_PACKAGE_libgps is not set # CONFIG_PACKAGE_libhamlib is not set # CONFIG_PACKAGE_libhavege is not set # CONFIG_PACKAGE_libhiredis is not set # CONFIG_PACKAGE_libhttp-parser is not set # CONFIG_PACKAGE_libhwloc is not set # CONFIG_PACKAGE_libical is not set # CONFIG_PACKAGE_libiconv is not set # CONFIG_PACKAGE_libiconv-full is not set # CONFIG_PACKAGE_libid3tag is not set # CONFIG_PACKAGE_libidn is not set # CONFIG_PACKAGE_libidn2 is not set # CONFIG_PACKAGE_libiio is not set # CONFIG_PACKAGE_libimobiledevice is not set # CONFIG_PACKAGE_libinotifytools is not set # CONFIG_PACKAGE_libinput is not set # CONFIG_PACKAGE_libintl is not set # CONFIG_PACKAGE_libintl-full is not set # CONFIG_PACKAGE_libiw is not set CONFIG_PACKAGE_libiwinfo=y # CONFIG_PACKAGE_libjpeg is not set CONFIG_PACKAGE_libjson-c=y # CONFIG_PACKAGE_libkeyutils is not set # CONFIG_PACKAGE_libkmod is not set # CONFIG_PACKAGE_libldns is not set # CONFIG_PACKAGE_libltdl is not set CONFIG_PACKAGE_liblua=y # CONFIG_PACKAGE_liblz4 is not set # CONFIG_PACKAGE_liblzo is not set # CONFIG_PACKAGE_libmad is not set # CONFIG_PACKAGE_libmagic is not set # CONFIG_PACKAGE_libmariadb is not set # CONFIG_PACKAGE_libmaxminddb is not set # CONFIG_PACKAGE_libmbim is not set # CONFIG_PACKAGE_libmcrypt is not set # CONFIG_PACKAGE_libmicrohttpd-no-ssl is not set # CONFIG_PACKAGE_libmicrohttpd-ssl is not set # CONFIG_PACKAGE_libmilter-sendmail is not set # CONFIG_PACKAGE_libminiupnpc is not set # CONFIG_PACKAGE_libmms is not set CONFIG_PACKAGE_libmnl=y # CONFIG_PACKAGE_libmodbus is not set # CONFIG_PACKAGE_libmosquitto-nossl is not set # CONFIG_PACKAGE_libmosquitto-ssl is not set # CONFIG_PACKAGE_libmount is not set # CONFIG_PACKAGE_libmpdclient is not set # CONFIG_PACKAGE_libmpeg2 is not set # CONFIG_PACKAGE_libmpg123 is not set # CONFIG_PACKAGE_libmraa is not set # CONFIG_PACKAGE_libnatpmp is not set # CONFIG_PACKAGE_libncurses is not set # CONFIG_PACKAGE_libndpi is not set # CONFIG_PACKAGE_libneon is not set # CONFIG_PACKAGE_libnet-1.2.x is not set # CONFIG_PACKAGE_libnetconf2 is not set # CONFIG_PACKAGE_libnetfilter-acct is not set # CONFIG_PACKAGE_libnetfilter-conntrack is not set # CONFIG_PACKAGE_libnetfilter-cthelper is not set # CONFIG_PACKAGE_libnetfilter-cttimeout is not set # CONFIG_PACKAGE_libnetfilter-log is not set # CONFIG_PACKAGE_libnetfilter-queue is not set # CONFIG_PACKAGE_libnetsnmp is not set # CONFIG_PACKAGE_libnettle is not set # CONFIG_PACKAGE_libnfnetlink is not set # CONFIG_PACKAGE_libnftnl is not set # CONFIG_PACKAGE_libnghttp2 is not set # CONFIG_PACKAGE_libnl is not set # CONFIG_PACKAGE_libnl-core is not set # CONFIG_PACKAGE_libnl-genl is not set # CONFIG_PACKAGE_libnl-nf is not set # CONFIG_PACKAGE_libnl-route is not set CONFIG_PACKAGE_libnl-tiny=y # CONFIG_PACKAGE_libnopoll is not set # CONFIG_PACKAGE_libogg is not set # CONFIG_PACKAGE_liboil is not set # CONFIG_PACKAGE_libopcodes is not set # CONFIG_PACKAGE_libopendkim is not set # CONFIG_PACKAGE_libopenobex is not set # CONFIG_PACKAGE_libopensc is not set # CONFIG_PACKAGE_libopenzwave is not set # CONFIG_PACKAGE_liboping is not set # CONFIG_PACKAGE_libopus is not set # CONFIG_PACKAGE_libout123 is not set # CONFIG_PACKAGE_libowfat is not set # CONFIG_PACKAGE_libp11 is not set # CONFIG_PACKAGE_libpagekite is not set # CONFIG_PACKAGE_libpam is not set # CONFIG_PACKAGE_libpcap is not set # CONFIG_PACKAGE_libpciaccess is not set CONFIG_PACKAGE_libpcre=y # CONFIG_PACKAGE_libpcre16 is not set # CONFIG_PACKAGE_libpcre2 is not set # CONFIG_PACKAGE_libpcre2-16 is not set # CONFIG_PACKAGE_libpcre2-32 is not set # CONFIG_PACKAGE_libpcrecpp is not set # CONFIG_PACKAGE_libpcsclite is not set # CONFIG_PACKAGE_libpkcs11-spy is not set # CONFIG_PACKAGE_libplist is not set # CONFIG_PACKAGE_libplistcxx is not set # CONFIG_PACKAGE_libpng is not set # CONFIG_PACKAGE_libpopt is not set # CONFIG_PACKAGE_libprotobuf-c is not set # CONFIG_PACKAGE_libqmi is not set # CONFIG_PACKAGE_libqrencode is not set # CONFIG_PACKAGE_libradcli is not set # CONFIG_PACKAGE_libreadline is not set # CONFIG_PACKAGE_libredblack is not set # CONFIG_PACKAGE_librouteros is not set # CONFIG_PACKAGE_libroxml is not set # CONFIG_PACKAGE_librpc is not set # CONFIG_PACKAGE_librrd1 is not set # CONFIG_PACKAGE_librtlsdr is not set # CONFIG_PACKAGE_libruby is not set # CONFIG_PACKAGE_libsamplerate is not set # CONFIG_PACKAGE_libsane is not set # CONFIG_PACKAGE_libsasl2 is not set # CONFIG_PACKAGE_libsearpc is not set # CONFIG_PACKAGE_libseccomp is not set # CONFIG_PACKAGE_libsensors is not set # CONFIG_PACKAGE_libshout is not set # CONFIG_PACKAGE_libshout-full is not set # CONFIG_PACKAGE_libshout-nossl is not set # CONFIG_PACKAGE_libsigcxx is not set # CONFIG_PACKAGE_libsmartcols is not set # CONFIG_PACKAGE_libsndfile is not set # CONFIG_PACKAGE_libsoc is not set # CONFIG_PACKAGE_libsocks is not set # CONFIG_PACKAGE_libsodium is not set # CONFIG_PACKAGE_libsoup is not set # CONFIG_PACKAGE_libsoxr is not set # CONFIG_PACKAGE_libspeex is not set # CONFIG_PACKAGE_libspeexdsp is not set # CONFIG_PACKAGE_libspice-server is not set # CONFIG_PACKAGE_libss is not set # CONFIG_PACKAGE_libssh is not set # CONFIG_PACKAGE_libssh2 is not set # CONFIG_PACKAGE_libstoken is not set # CONFIG_PACKAGE_libstrophe is not set # CONFIG_PACKAGE_libtalloc is not set # CONFIG_PACKAGE_libtasn1 is not set # CONFIG_PACKAGE_libtheora is not set # CONFIG_PACKAGE_libtiff is not set # CONFIG_PACKAGE_libtiffxx is not set # CONFIG_PACKAGE_libtins is not set # CONFIG_PACKAGE_libtirpc is not set # CONFIG_PACKAGE_libtorrent is not set CONFIG_PACKAGE_libubox=y # CONFIG_PACKAGE_libubox-lua is not set CONFIG_PACKAGE_libubus=y CONFIG_PACKAGE_libubus-lua=y CONFIG_PACKAGE_libuci=y CONFIG_PACKAGE_libuci-lua=y CONFIG_PACKAGE_libuclient=y # CONFIG_PACKAGE_libudev-fbsd is not set # CONFIG_PACKAGE_libudns is not set # CONFIG_PACKAGE_libuecc is not set # CONFIG_PACKAGE_libugpio is not set # CONFIG_PACKAGE_libunistring is not set # CONFIG_PACKAGE_libunwind is not set # CONFIG_PACKAGE_libupnp is not set # CONFIG_PACKAGE_libupnpp is not set # CONFIG_PACKAGE_liburcu is not set # CONFIG_PACKAGE_libusb-1.0 is not set # CONFIG_PACKAGE_libusb-compat is not set # CONFIG_PACKAGE_libusbmuxd is not set # CONFIG_PACKAGE_libustream-mbedtls is not set CONFIG_PACKAGE_libustream-openssl=y # CONFIG_PACKAGE_libustream-wolfssl is not set CONFIG_PACKAGE_libuuid=y # CONFIG_PACKAGE_libuv is not set # CONFIG_PACKAGE_libuvc is not set # CONFIG_PACKAGE_libv4l is not set # CONFIG_PACKAGE_libvorbis is not set # CONFIG_PACKAGE_libvorbisidec is not set # CONFIG_PACKAGE_libvpx is not set # CONFIG_PACKAGE_libwebcam is not set # CONFIG_PACKAGE_libwebsockets-full is not set # CONFIG_PACKAGE_libwebsockets-mbedtls is not set # CONFIG_PACKAGE_libwebsockets-openssl is not set # CONFIG_PACKAGE_libwrap is not set # CONFIG_PACKAGE_libwxbase is not set # CONFIG_PACKAGE_libx264 is not set # CONFIG_PACKAGE_libxerces-c is not set # CONFIG_PACKAGE_libxerces-c-samples is not set # CONFIG_PACKAGE_libxml2 is not set # CONFIG_PACKAGE_libxslt is not set # CONFIG_PACKAGE_libyaml-cpp is not set # CONFIG_PACKAGE_libyang is not set # CONFIG_PACKAGE_libzdb is not set # CONFIG_PACKAGE_libzmq-curve is not set # CONFIG_PACKAGE_libzmq-nc is not set # CONFIG_PACKAGE_linux-atm is not set # CONFIG_PACKAGE_loudmouth is not set # CONFIG_PACKAGE_lttng-ust is not set # CONFIG_PACKAGE_mtdev is not set # CONFIG_PACKAGE_musl-fts is not set # CONFIG_PACKAGE_mxml is not set # CONFIG_PACKAGE_nacl is not set # CONFIG_PACKAGE_oniguruma is not set # CONFIG_PACKAGE_opencv is not set # CONFIG_PACKAGE_p11-kit is not set # CONFIG_PACKAGE_pixman is not set # CONFIG_PACKAGE_poco is not set # CONFIG_PACKAGE_protobuf is not set # CONFIG_PACKAGE_protobuf-lite is not set # CONFIG_PACKAGE_pthsem is not set # CONFIG_PACKAGE_rblibtorrent is not set CONFIG_PACKAGE_rpcd-mod-rrdns=y # CONFIG_PACKAGE_rxtx is not set # CONFIG_PACKAGE_sbc is not set # CONFIG_PACKAGE_spice-protocol is not set # CONFIG_PACKAGE_terminfo is not set # CONFIG_PACKAGE_tinycdb is not set # CONFIG_PACKAGE_uclibcxx is not set # CONFIG_PACKAGE_uw-imap is not set # CONFIG_PACKAGE_xmlrpc-c is not set # CONFIG_PACKAGE_xmlrpc-c-client is not set # CONFIG_PACKAGE_xmlrpc-c-server is not set # CONFIG_PACKAGE_yajl is not set CONFIG_PACKAGE_zlib=y # # Configuration # # CONFIG_ZLIB_OPTIMIZE_SPEED is not set # # LuCI # # # 1. Collections # CONFIG_PACKAGE_luci=y # CONFIG_PACKAGE_luci-nginx is not set # CONFIG_PACKAGE_luci-ssl-nginx is not set # CONFIG_PACKAGE_luci-ssl-openssl is not set # # 2. Modules # CONFIG_PACKAGE_luci-base=y CONFIG_LUCI_SRCDIET=y # # Translations # # CONFIG_LUCI_LANG_hu is not set # CONFIG_LUCI_LANG_pt is not set # CONFIG_LUCI_LANG_sk is not set # CONFIG_LUCI_LANG_ko is not set # CONFIG_LUCI_LANG_en is not set # CONFIG_LUCI_LANG_el is not set # CONFIG_LUCI_LANG_uk is not set # CONFIG_LUCI_LANG_ja is not set # CONFIG_LUCI_LANG_vi is not set # CONFIG_LUCI_LANG_he is not set # CONFIG_LUCI_LANG_no is not set # CONFIG_LUCI_LANG_ms is not set # CONFIG_LUCI_LANG_pl is not set CONFIG_LUCI_LANG_zh-cn=y # CONFIG_LUCI_LANG_ro is not set # CONFIG_LUCI_LANG_de is not set # CONFIG_LUCI_LANG_zh-tw is not set # CONFIG_LUCI_LANG_tr is not set # CONFIG_LUCI_LANG_sv is not set # CONFIG_LUCI_LANG_ru is not set # CONFIG_LUCI_LANG_pt-br is not set # CONFIG_LUCI_LANG_ca is not set # CONFIG_LUCI_LANG_es is not set # CONFIG_LUCI_LANG_cs is not set # CONFIG_LUCI_LANG_fr is not set # CONFIG_LUCI_LANG_it is not set CONFIG_PACKAGE_luci-mod-admin-full=y # CONFIG_PACKAGE_luci-mod-failsafe is not set # CONFIG_PACKAGE_luci-mod-freifunk is not set # CONFIG_PACKAGE_luci-mod-freifunk-community is not set # CONFIG_PACKAGE_luci-mod-rpc is not set # # 3. Applications # # CONFIG_PACKAGE_luci-app-accesscontrol is not set # CONFIG_PACKAGE_luci-app-acme is not set # CONFIG_PACKAGE_luci-app-adblock is not set # CONFIG_PACKAGE_luci-app-adbyby-plus is not set # CONFIG_PACKAGE_luci-app-advanced-reboot is not set # CONFIG_PACKAGE_luci-app-ahcp is not set # CONFIG_PACKAGE_luci-app-airplay2 is not set # CONFIG_PACKAGE_luci-app-amule is not set # CONFIG_PACKAGE_luci-app-aria2 is not set # CONFIG_PACKAGE_luci-app-arpbind is not set # CONFIG_PACKAGE_luci-app-asterisk is not set # CONFIG_PACKAGE_luci-app-attendedsysupgrade is not set CONFIG_PACKAGE_luci-app-autoreboot=y # CONFIG_PACKAGE_luci-app-baidupcs-web is not set # CONFIG_PACKAGE_luci-app-bcp38 is not set # CONFIG_PACKAGE_luci-app-bird1-ipv4 is not set # CONFIG_PACKAGE_luci-app-bird1-ipv6 is not set # CONFIG_PACKAGE_luci-app-bmx6 is not set # CONFIG_PACKAGE_luci-app-bmx7 is not set # CONFIG_PACKAGE_luci-app-cifs-mount is not set # CONFIG_PACKAGE_luci-app-cifsd is not set # CONFIG_PACKAGE_luci-app-cjdns is not set # CONFIG_PACKAGE_luci-app-clamav is not set # CONFIG_PACKAGE_luci-app-commands is not set # CONFIG_PACKAGE_luci-app-cshark is not set # CONFIG_PACKAGE_luci-app-ddns is not set # CONFIG_PACKAGE_luci-app-diag-core is not set # CONFIG_PACKAGE_luci-app-diskman is not set # CONFIG_PACKAGE_luci-app-diskman_INCLUDE_btrfs_progs is not set # CONFIG_PACKAGE_luci-app-diskman_INCLUDE_lsblk is not set # CONFIG_PACKAGE_luci-app-diskman_INCLUDE_mdadm is not set # CONFIG_PACKAGE_luci-app-diskman_INCLUDE_kmod_md_raid456 is not set # CONFIG_PACKAGE_luci-app-diskman_INCLUDE_kmod_md_linear is not set # CONFIG_PACKAGE_luci-app-dnscrypt-proxy is not set # CONFIG_PACKAGE_luci-app-dump1090 is not set # CONFIG_PACKAGE_luci-app-dynapoint is not set # CONFIG_PACKAGE_luci-app-e2guardian is not set # CONFIG_PACKAGE_luci-app-familycloud is not set # CONFIG_PACKAGE_luci-app-filetransfer is not set CONFIG_PACKAGE_luci-app-firewall=y # CONFIG_PACKAGE_luci-app-freifunk-diagnostics is not set # CONFIG_PACKAGE_luci-app-freifunk-policyrouting is not set # CONFIG_PACKAGE_luci-app-freifunk-widgets is not set # CONFIG_PACKAGE_luci-app-frpc is not set # CONFIG_PACKAGE_luci-app-frps is not set # CONFIG_PACKAGE_luci-app-fwknopd is not set # CONFIG_PACKAGE_luci-app-guest-wifi is not set # CONFIG_PACKAGE_luci-app-haproxy-tcp is not set # CONFIG_PACKAGE_luci-app-hd-idle is not set # CONFIG_PACKAGE_luci-app-hnet is not set # CONFIG_PACKAGE_luci-app-ipsec-vpnd is not set # CONFIG_PACKAGE_luci-app-kodexplorer is not set # CONFIG_PACKAGE_luci-app-lxc is not set # CONFIG_PACKAGE_luci-app-meshwizard is not set # CONFIG_PACKAGE_luci-app-minidlna is not set # CONFIG_PACKAGE_luci-app-mjpg-streamer is not set # CONFIG_PACKAGE_luci-app-mtwifi is not set # CONFIG_PACKAGE_luci-app-music-remote-center is not set # CONFIG_PACKAGE_luci-app-mwan3 is not set # CONFIG_PACKAGE_luci-app-mwan3helper is not set # CONFIG_PACKAGE_luci-app-n2n_v2 is not set # CONFIG_PACKAGE_luci-app-netdata is not set # CONFIG_PACKAGE_luci-app-nfs is not set # CONFIG_PACKAGE_luci-app-nft-qos is not set # CONFIG_PACKAGE_luci-app-nlbwmon is not set # CONFIG_PACKAGE_luci-app-noddos is not set # CONFIG_PACKAGE_luci-app-nps is not set # CONFIG_PACKAGE_luci-app-ntpc is not set # CONFIG_PACKAGE_luci-app-ocserv is not set # CONFIG_PACKAGE_luci-app-olsr is not set # CONFIG_PACKAGE_luci-app-olsr-services is not set # CONFIG_PACKAGE_luci-app-olsr-viz is not set # CONFIG_PACKAGE_luci-app-openvpn is not set # CONFIG_PACKAGE_luci-app-openvpn-server is not set # CONFIG_PACKAGE_luci-app-p910nd is not set # CONFIG_PACKAGE_luci-app-pagekitec is not set # CONFIG_PACKAGE_luci-app-polipo is not set # CONFIG_PACKAGE_luci-app-pppoe-relay is not set # CONFIG_PACKAGE_luci-app-privoxy is not set # CONFIG_PACKAGE_luci-app-ps3netsrv is not set # CONFIG_PACKAGE_luci-app-qbittorrent is not set # CONFIG_PACKAGE_luci-app-qos is not set # CONFIG_PACKAGE_luci-app-radicale is not set CONFIG_PACKAGE_luci-app-ramfree=y # CONFIG_PACKAGE_luci-app-rclone is not set # CONFIG_PACKAGE_luci-app-rp-pppoe-server is not set # CONFIG_PACKAGE_luci-app-samba is not set # CONFIG_PACKAGE_luci-app-samba4 is not set CONFIG_PACKAGE_luci-app-sfe=y # CONFIG_PACKAGE_luci-app-shadowsocks-libev is not set # CONFIG_PACKAGE_luci-app-shairplay is not set # CONFIG_PACKAGE_luci-app-siitwizard is not set # CONFIG_PACKAGE_luci-app-simple-adblock is not set # CONFIG_PACKAGE_luci-app-softethervpn is not set # CONFIG_PACKAGE_luci-app-splash is not set # CONFIG_PACKAGE_luci-app-sqm is not set # CONFIG_PACKAGE_luci-app-squid is not set # CONFIG_PACKAGE_luci-app-ssrserver-python is not set # CONFIG_PACKAGE_luci-app-statistics is not set # CONFIG_PACKAGE_luci-app-syncdial is not set # CONFIG_PACKAGE_luci-app-tinyproxy is not set # CONFIG_PACKAGE_luci-app-transmission is not set # CONFIG_PACKAGE_luci-app-travelmate is not set # CONFIG_PACKAGE_luci-app-ttyd is not set # CONFIG_PACKAGE_luci-app-udpxy is not set # CONFIG_PACKAGE_luci-app-uhttpd is not set # CONFIG_PACKAGE_luci-app-unblockmusic is not set # CONFIG_UnblockNeteaseMusic_Go is not set # CONFIG_UnblockNeteaseMusic_NodeJS is not set # CONFIG_PACKAGE_luci-app-unbound is not set # CONFIG_PACKAGE_luci-app-upnp is not set # CONFIG_PACKAGE_luci-app-usb-printer is not set CONFIG_PACKAGE_luci-app-v2ray-server=y # CONFIG_PACKAGE_luci-app-verysync is not set # CONFIG_PACKAGE_luci-app-vlmcsd is not set # CONFIG_PACKAGE_luci-app-vnstat is not set # CONFIG_PACKAGE_luci-app-vpnbypass is not set # CONFIG_PACKAGE_luci-app-vsftpd is not set # CONFIG_PACKAGE_luci-app-watchcat is not set # CONFIG_PACKAGE_luci-app-webadmin is not set # CONFIG_PACKAGE_luci-app-wifischedule is not set # CONFIG_PACKAGE_luci-app-wireguard is not set # CONFIG_PACKAGE_luci-app-wol is not set # CONFIG_PACKAGE_luci-app-wrtbwmon is not set # CONFIG_PACKAGE_luci-app-xlnetacc is not set # CONFIG_PACKAGE_luci-app-zerotier is not set # # 4. Themes # # CONFIG_PACKAGE_luci-theme-argon is not set CONFIG_PACKAGE_luci-theme-bootstrap=y # CONFIG_PACKAGE_luci-theme-material is not set CONFIG_PACKAGE_luci-theme-netgear=y # # 5. Protocols # # CONFIG_PACKAGE_luci-proto-3g is not set # CONFIG_PACKAGE_luci-proto-bonding is not set # CONFIG_PACKAGE_luci-proto-ipip is not set # CONFIG_PACKAGE_luci-proto-ipv6 is not set # CONFIG_PACKAGE_luci-proto-ncm is not set # CONFIG_PACKAGE_luci-proto-openconnect is not set CONFIG_PACKAGE_luci-proto-ppp=y # CONFIG_PACKAGE_luci-proto-qmi is not set # CONFIG_PACKAGE_luci-proto-relay is not set # CONFIG_PACKAGE_luci-proto-vpnc is not set # CONFIG_PACKAGE_luci-proto-wireguard is not set # # 6. Libraries # # CONFIG_PACKAGE_luci-lib-docker is not set # CONFIG_PACKAGE_luci-lib-dracula is not set # CONFIG_PACKAGE_luci-lib-httpclient is not set # CONFIG_PACKAGE_luci-lib-httpprotoutils is not set CONFIG_PACKAGE_luci-lib-ip=y # CONFIG_PACKAGE_luci-lib-iptparser is not set # CONFIG_PACKAGE_luci-lib-jquery-1-4 is not set # CONFIG_PACKAGE_luci-lib-json is not set CONFIG_PACKAGE_luci-lib-jsonc=y # CONFIG_PACKAGE_luci-lib-luaneightbl is not set CONFIG_PACKAGE_luci-lib-nixio=y # CONFIG_PACKAGE_luci-lib-px5g is not set # # 9. Freifunk # # CONFIG_PACKAGE_freifunk-common is not set # CONFIG_PACKAGE_freifunk-firewall is not set # CONFIG_PACKAGE_freifunk-policyrouting is not set # CONFIG_PACKAGE_freifunk-watchdog is not set # CONFIG_PACKAGE_meshwizard is not set CONFIG_PACKAGE_default-settings=y CONFIG_PACKAGE_luci-i18n-autoreboot-zh-cn=y # CONFIG_PACKAGE_luci-i18n-base-ca is not set # CONFIG_PACKAGE_luci-i18n-base-cs is not set # CONFIG_PACKAGE_luci-i18n-base-de is not set # CONFIG_PACKAGE_luci-i18n-base-el is not set # CONFIG_PACKAGE_luci-i18n-base-en is not set # CONFIG_PACKAGE_luci-i18n-base-es is not set # CONFIG_PACKAGE_luci-i18n-base-fr is not set # CONFIG_PACKAGE_luci-i18n-base-he is not set # CONFIG_PACKAGE_luci-i18n-base-hu is not set # CONFIG_PACKAGE_luci-i18n-base-it is not set # CONFIG_PACKAGE_luci-i18n-base-ja is not set # CONFIG_PACKAGE_luci-i18n-base-ko is not set # CONFIG_PACKAGE_luci-i18n-base-ms is not set # CONFIG_PACKAGE_luci-i18n-base-no is not set # CONFIG_PACKAGE_luci-i18n-base-pl is not set # CONFIG_PACKAGE_luci-i18n-base-pt is not set # CONFIG_PACKAGE_luci-i18n-base-pt-br is not set # CONFIG_PACKAGE_luci-i18n-base-ro is not set # CONFIG_PACKAGE_luci-i18n-base-ru is not set # CONFIG_PACKAGE_luci-i18n-base-sk is not set # CONFIG_PACKAGE_luci-i18n-base-sv is not set # CONFIG_PACKAGE_luci-i18n-base-tr is not set # CONFIG_PACKAGE_luci-i18n-base-uk is not set # CONFIG_PACKAGE_luci-i18n-base-vi is not set CONFIG_PACKAGE_luci-i18n-base-zh-cn=y # CONFIG_PACKAGE_luci-i18n-base-zh-tw is not set # CONFIG_PACKAGE_luci-i18n-firewall-ca is not set # CONFIG_PACKAGE_luci-i18n-firewall-cs is not set # CONFIG_PACKAGE_luci-i18n-firewall-de is not set # CONFIG_PACKAGE_luci-i18n-firewall-el is not set # CONFIG_PACKAGE_luci-i18n-firewall-en is not set # CONFIG_PACKAGE_luci-i18n-firewall-es is not set # CONFIG_PACKAGE_luci-i18n-firewall-fr is not set # CONFIG_PACKAGE_luci-i18n-firewall-he is not set # CONFIG_PACKAGE_luci-i18n-firewall-hu is not set # CONFIG_PACKAGE_luci-i18n-firewall-it is not set # CONFIG_PACKAGE_luci-i18n-firewall-ja is not set # CONFIG_PACKAGE_luci-i18n-firewall-ko is not set # CONFIG_PACKAGE_luci-i18n-firewall-ms is not set # CONFIG_PACKAGE_luci-i18n-firewall-no is not set # CONFIG_PACKAGE_luci-i18n-firewall-pl is not set # CONFIG_PACKAGE_luci-i18n-firewall-pt is not set # CONFIG_PACKAGE_luci-i18n-firewall-pt-br is not set # CONFIG_PACKAGE_luci-i18n-firewall-ro is not set # CONFIG_PACKAGE_luci-i18n-firewall-ru is not set # CONFIG_PACKAGE_luci-i18n-firewall-sk is not set # CONFIG_PACKAGE_luci-i18n-firewall-sv is not set # CONFIG_PACKAGE_luci-i18n-firewall-tr is not set # CONFIG_PACKAGE_luci-i18n-firewall-uk is not set # CONFIG_PACKAGE_luci-i18n-firewall-vi is not set CONFIG_PACKAGE_luci-i18n-firewall-zh-cn=y # CONFIG_PACKAGE_luci-i18n-firewall-zh-tw is not set CONFIG_PACKAGE_luci-i18n-ramfree-zh-cn=y CONFIG_PACKAGE_luci-i18n-sfe-zh-cn=y CONFIG_PACKAGE_luci-i18n-v2ray-server-zh-cn=y # # Mail # # CONFIG_PACKAGE_alpine is not set # CONFIG_PACKAGE_alpine-nossl is not set # CONFIG_PACKAGE_bogofilter is not set # CONFIG_PACKAGE_clamsmtp is not set # CONFIG_PACKAGE_dovecot is not set # CONFIG_PACKAGE_dovecot-pigeonhole is not set # CONFIG_PACKAGE_dovecot-utils is not set # CONFIG_PACKAGE_emailrelay is not set # CONFIG_PACKAGE_fdm is not set # CONFIG_PACKAGE_greyfix is not set # CONFIG_PACKAGE_mailman is not set # CONFIG_PACKAGE_mailsend is not set # CONFIG_PACKAGE_mailsend-nossl is not set # CONFIG_PACKAGE_msmtp is not set # CONFIG_PACKAGE_msmtp-nossl is not set # CONFIG_PACKAGE_mutt is not set # CONFIG_PACKAGE_nail is not set # CONFIG_PACKAGE_opendkim is not set # CONFIG_PACKAGE_opendkim-tools is not set # CONFIG_PACKAGE_postfix is not set # # Select postfix build options # CONFIG_POSTFIX_TLS=y CONFIG_POSTFIX_SASL=y CONFIG_POSTFIX_LDAP=y # CONFIG_POSTFIX_DB is not set CONFIG_POSTFIX_CDB=y CONFIG_POSTFIX_SQLITE=y # CONFIG_POSTFIX_PGSQL is not set CONFIG_POSTFIX_PCRE=y # CONFIG_POSTFIX_EAI is not set # CONFIG_PACKAGE_ssmtp is not set # # Multimedia # # # Streaming # # CONFIG_PACKAGE_oggfwd is not set # CONFIG_PACKAGE_crtmpserver is not set # CONFIG_PACKAGE_ffmpeg is not set # CONFIG_PACKAGE_ffprobe is not set # CONFIG_PACKAGE_ffserver is not set # CONFIG_PACKAGE_fswebcam is not set # CONFIG_PACKAGE_gmediarender is not set # CONFIG_PACKAGE_gphoto2 is not set # CONFIG_PACKAGE_grilo is not set # CONFIG_PACKAGE_grilo-plugins is not set # CONFIG_PACKAGE_gst1-libav is not set # CONFIG_PACKAGE_gstreamer1-libs is not set # CONFIG_PACKAGE_gstreamer1-plugins-bad is not set # CONFIG_PACKAGE_gstreamer1-plugins-base is not set # CONFIG_PACKAGE_gstreamer1-plugins-good is not set # CONFIG_PACKAGE_gstreamer1-plugins-ugly is not set # CONFIG_PACKAGE_gstreamer1-utils is not set # CONFIG_PACKAGE_icecast is not set # CONFIG_PACKAGE_lcdgrilo is not set # CONFIG_PACKAGE_minidlna is not set # CONFIG_PACKAGE_mjpg-streamer is not set # CONFIG_PACKAGE_motion is not set # CONFIG_PACKAGE_tvheadend is not set # CONFIG_PACKAGE_v4l2rtspserver is not set # CONFIG_PACKAGE_vips is not set # CONFIG_PACKAGE_xupnpd is not set # CONFIG_PACKAGE_youtube-dl is not set # # Network # # # BitTorrent # # CONFIG_PACKAGE_mktorrent is not set # CONFIG_PACKAGE_opentracker is not set # CONFIG_PACKAGE_opentracker6 is not set # CONFIG_PACKAGE_qBittorrent is not set # CONFIG_PACKAGE_rtorrent is not set # CONFIG_PACKAGE_rtorrent-rpc is not set # CONFIG_PACKAGE_transmission-cli-openssl is not set # CONFIG_PACKAGE_transmission-daemon-openssl is not set # CONFIG_PACKAGE_transmission-remote-openssl is not set # CONFIG_PACKAGE_transmission-web is not set # CONFIG_PACKAGE_transmission-web-control is not set # # Captive Portals # # CONFIG_PACKAGE_coova-chilli is not set # CONFIG_PACKAGE_nodogsplash is not set # CONFIG_PACKAGE_wifidog is not set # CONFIG_PACKAGE_wifidog-ng-mbedtls is not set # CONFIG_PACKAGE_wifidog-ng-nossl is not set # CONFIG_PACKAGE_wifidog-ng-openssl is not set # CONFIG_PACKAGE_wifidog-ng-wolfssl is not set # CONFIG_PACKAGE_wifidog-tls is not set # # Cloud Manager # # CONFIG_PACKAGE_rclone-ng is not set # CONFIG_PACKAGE_rclone-webui-react is not set # # Download Manager # # CONFIG_PACKAGE_ariang is not set # CONFIG_PACKAGE_webui-aria2 is not set # CONFIG_PACKAGE_yaaw is not set # # File Transfer # # CONFIG_PACKAGE_aria2 is not set # CONFIG_PACKAGE_atftp is not set # CONFIG_PACKAGE_atftpd is not set # CONFIG_PACKAGE_curl is not set # CONFIG_PACKAGE_gnurl is not set # CONFIG_PACKAGE_lftp is not set # CONFIG_PACKAGE_ps3netsrv is not set # CONFIG_PACKAGE_rosy-file-server is not set # CONFIG_PACKAGE_rsync is not set # CONFIG_PACKAGE_rsyncd is not set # CONFIG_PACKAGE_vsftpd is not set CONFIG_PACKAGE_vsftpd-alt=y CONFIG_VSFTPD_USE_UCI_SCRIPTS=y # CONFIG_PACKAGE_vsftpd-tls is not set CONFIG_PACKAGE_wget=y # CONFIG_PACKAGE_wget-nossl is not set # # Filesystem # # CONFIG_PACKAGE_davfs2 is not set # CONFIG_PACKAGE_ksmbd-avahi-service is not set # CONFIG_PACKAGE_ksmbd-server is not set # CONFIG_PACKAGE_ksmbd-utils is not set # CONFIG_PACKAGE_netatalk is not set # CONFIG_PACKAGE_nfs-kernel-server is not set # CONFIG_PACKAGE_owftpd is not set # CONFIG_PACKAGE_owhttpd is not set # CONFIG_PACKAGE_owserver is not set # CONFIG_PACKAGE_sshfs is not set # # Firewall # # CONFIG_PACKAGE_arptables is not set # CONFIG_PACKAGE_conntrack is not set # CONFIG_PACKAGE_conntrackd is not set # CONFIG_PACKAGE_ebtables is not set # CONFIG_PACKAGE_fwknop is not set # CONFIG_PACKAGE_fwknopd is not set # CONFIG_PACKAGE_ip6tables is not set CONFIG_PACKAGE_iptables=y # CONFIG_IPTABLES_CONNLABEL is not set # CONFIG_IPTABLES_NFTABLES is not set # CONFIG_PACKAGE_iptables-mod-account is not set # CONFIG_PACKAGE_iptables-mod-chaos is not set # CONFIG_PACKAGE_iptables-mod-checksum is not set # CONFIG_PACKAGE_iptables-mod-cluster is not set # CONFIG_PACKAGE_iptables-mod-clusterip is not set # CONFIG_PACKAGE_iptables-mod-condition is not set # CONFIG_PACKAGE_iptables-mod-conntrack-extra is not set # CONFIG_PACKAGE_iptables-mod-delude is not set # CONFIG_PACKAGE_iptables-mod-dhcpmac is not set # CONFIG_PACKAGE_iptables-mod-dnetmap is not set # CONFIG_PACKAGE_iptables-mod-extra is not set # CONFIG_PACKAGE_iptables-mod-filter is not set CONFIG_PACKAGE_iptables-mod-fullconenat=y # CONFIG_PACKAGE_iptables-mod-fuzzy is not set # CONFIG_PACKAGE_iptables-mod-geoip is not set # CONFIG_PACKAGE_iptables-mod-hashlimit is not set # CONFIG_PACKAGE_iptables-mod-iface is not set # CONFIG_PACKAGE_iptables-mod-ipmark is not set # CONFIG_PACKAGE_iptables-mod-ipopt is not set # CONFIG_PACKAGE_iptables-mod-ipp2p is not set # CONFIG_PACKAGE_iptables-mod-iprange is not set # CONFIG_PACKAGE_iptables-mod-ipsec is not set # CONFIG_PACKAGE_iptables-mod-ipv4options is not set # CONFIG_PACKAGE_iptables-mod-led is not set # CONFIG_PACKAGE_iptables-mod-length2 is not set # CONFIG_PACKAGE_iptables-mod-logmark is not set # CONFIG_PACKAGE_iptables-mod-lscan is not set # CONFIG_PACKAGE_iptables-mod-lua is not set # CONFIG_PACKAGE_iptables-mod-nat-extra is not set # CONFIG_PACKAGE_iptables-mod-nflog is not set # CONFIG_PACKAGE_iptables-mod-nfqueue is not set # CONFIG_PACKAGE_iptables-mod-physdev is not set # CONFIG_PACKAGE_iptables-mod-psd is not set # CONFIG_PACKAGE_iptables-mod-quota2 is not set # CONFIG_PACKAGE_iptables-mod-rpfilter is not set # CONFIG_PACKAGE_iptables-mod-sysrq is not set # CONFIG_PACKAGE_iptables-mod-tarpit is not set # CONFIG_PACKAGE_iptables-mod-tee is not set # CONFIG_PACKAGE_iptables-mod-tproxy is not set # CONFIG_PACKAGE_iptables-mod-trace is not set # CONFIG_PACKAGE_iptables-mod-u32 is not set # CONFIG_PACKAGE_iptables-mod-ulog is not set # CONFIG_PACKAGE_iptaccount is not set # CONFIG_PACKAGE_iptgeoip is not set # CONFIG_PACKAGE_miniupnpc is not set CONFIG_PACKAGE_miniupnpd=y # CONFIG_MINIUPNPD_IGDv2 is not set # CONFIG_PACKAGE_natpmpc is not set # CONFIG_PACKAGE_nftables is not set # CONFIG_PACKAGE_shorewall is not set # CONFIG_PACKAGE_shorewall-core is not set # CONFIG_PACKAGE_shorewall-lite is not set # CONFIG_PACKAGE_shorewall6 is not set # CONFIG_PACKAGE_shorewall6-lite is not set # CONFIG_PACKAGE_snort is not set # # Firewall Tunnel # # CONFIG_PACKAGE_iodine is not set # CONFIG_PACKAGE_iodined is not set # # FreeRADIUS (version 3) # # CONFIG_PACKAGE_freeradius3 is not set # CONFIG_PACKAGE_freeradius3-common is not set # CONFIG_PACKAGE_freeradius3-utils is not set # # IP Addresses and Names # # CONFIG_PACKAGE_aggregate is not set # CONFIG_PACKAGE_announce is not set # CONFIG_PACKAGE_avahi-autoipd is not set # CONFIG_PACKAGE_avahi-daemon-service-http is not set # CONFIG_PACKAGE_avahi-daemon-service-ssh is not set # CONFIG_PACKAGE_avahi-dbus-daemon is not set # CONFIG_PACKAGE_avahi-dnsconfd is not set # CONFIG_PACKAGE_avahi-nodbus-daemon is not set # CONFIG_PACKAGE_avahi-utils is not set # CONFIG_PACKAGE_bind-check is not set # CONFIG_PACKAGE_bind-client is not set # CONFIG_PACKAGE_bind-dig is not set # CONFIG_PACKAGE_bind-dnssec is not set # CONFIG_PACKAGE_bind-host is not set # CONFIG_PACKAGE_bind-rndc is not set # CONFIG_PACKAGE_bind-server is not set # CONFIG_PACKAGE_bind-tools is not set # CONFIG_PACKAGE_danish is not set CONFIG_PACKAGE_ddns-scripts=y CONFIG_PACKAGE_ddns-scripts_aliyun=y # CONFIG_PACKAGE_ddns-scripts_cloudflare.com-v4 is not set CONFIG_PACKAGE_ddns-scripts_dnspod=y # CONFIG_PACKAGE_ddns-scripts_freedns_42_pl is not set # CONFIG_PACKAGE_ddns-scripts_godaddy.com-v1 is not set # CONFIG_PACKAGE_ddns-scripts_no-ip_com is not set # CONFIG_PACKAGE_ddns-scripts_nsupdate is not set # CONFIG_PACKAGE_ddns-scripts_route53-v1 is not set # CONFIG_PACKAGE_dhcp-forwarder is not set # CONFIG_PACKAGE_dns2socks is not set # CONFIG_PACKAGE_dnscrypt-proxy is not set # CONFIG_PACKAGE_dnscrypt-proxy-resolvers is not set # CONFIG_PACKAGE_drill is not set # CONFIG_PACKAGE_hostip is not set # CONFIG_PACKAGE_idn is not set # CONFIG_PACKAGE_idn2 is not set # CONFIG_PACKAGE_inadyn is not set # CONFIG_PACKAGE_isc-dhcp-client-ipv4 is not set # CONFIG_PACKAGE_isc-dhcp-client-ipv6 is not set # CONFIG_PACKAGE_isc-dhcp-omshell-ipv4 is not set # CONFIG_PACKAGE_isc-dhcp-omshell-ipv6 is not set # CONFIG_PACKAGE_isc-dhcp-relay-ipv4 is not set # CONFIG_PACKAGE_isc-dhcp-relay-ipv6 is not set # CONFIG_PACKAGE_isc-dhcp-server-ipv4 is not set # CONFIG_PACKAGE_isc-dhcp-server-ipv6 is not set # CONFIG_PACKAGE_kadnode is not set # CONFIG_PACKAGE_knot is not set # CONFIG_PACKAGE_knot-dig is not set # CONFIG_PACKAGE_knot-host is not set # CONFIG_PACKAGE_knot-keymgr is not set # CONFIG_PACKAGE_knot-nsupdate is not set # CONFIG_PACKAGE_knot-tests is not set # CONFIG_PACKAGE_knot-zonecheck is not set # CONFIG_PACKAGE_ldns-examples is not set # CONFIG_PACKAGE_mdns-utils is not set # CONFIG_PACKAGE_mdnsd is not set # CONFIG_PACKAGE_mdnsresponder is not set # CONFIG_PACKAGE_nsd is not set # CONFIG_PACKAGE_nsd-control is not set # CONFIG_PACKAGE_nsd-control-setup is not set # CONFIG_PACKAGE_nsd-nossl is not set # CONFIG_PACKAGE_ohybridproxy is not set # CONFIG_PACKAGE_stubby is not set # CONFIG_PACKAGE_unbound-anchor is not set # CONFIG_PACKAGE_unbound-checkconf is not set # CONFIG_PACKAGE_unbound-control is not set # CONFIG_PACKAGE_unbound-control-setup is not set # CONFIG_PACKAGE_unbound-daemon is not set # CONFIG_PACKAGE_unbound-daemon-heavy is not set # CONFIG_PACKAGE_unbound-host is not set # CONFIG_PACKAGE_wsdd2 is not set # CONFIG_PACKAGE_zonestitcher is not set # # Instant Messaging # # CONFIG_PACKAGE_bitlbee is not set # CONFIG_PACKAGE_irssi is not set # CONFIG_PACKAGE_ngircd is not set # CONFIG_PACKAGE_ngircd-nossl is not set # CONFIG_PACKAGE_prosody is not set # CONFIG_PACKAGE_quassel-irssi is not set # CONFIG_PACKAGE_umurmur-mbedtls is not set # CONFIG_PACKAGE_umurmur-openssl is not set # CONFIG_PACKAGE_znc is not set # # Linux ATM tools # # CONFIG_PACKAGE_atm-aread is not set # CONFIG_PACKAGE_atm-atmaddr is not set # CONFIG_PACKAGE_atm-atmdiag is not set # CONFIG_PACKAGE_atm-atmdump is not set # CONFIG_PACKAGE_atm-atmloop is not set # CONFIG_PACKAGE_atm-atmsigd is not set # CONFIG_PACKAGE_atm-atmswitch is not set # CONFIG_PACKAGE_atm-atmtcp is not set # CONFIG_PACKAGE_atm-awrite is not set # CONFIG_PACKAGE_atm-bus is not set # CONFIG_PACKAGE_atm-debug-tools is not set # CONFIG_PACKAGE_atm-diagnostics is not set # CONFIG_PACKAGE_atm-esi is not set # CONFIG_PACKAGE_atm-ilmid is not set # CONFIG_PACKAGE_atm-ilmidiag is not set # CONFIG_PACKAGE_atm-lecs is not set # CONFIG_PACKAGE_atm-les is not set # CONFIG_PACKAGE_atm-mpcd is not set # CONFIG_PACKAGE_atm-saaldump is not set # CONFIG_PACKAGE_atm-sonetdiag is not set # CONFIG_PACKAGE_atm-svc_recv is not set # CONFIG_PACKAGE_atm-svc_send is not set # CONFIG_PACKAGE_atm-tools is not set # CONFIG_PACKAGE_atm-ttcp_atm is not set # CONFIG_PACKAGE_atm-zeppelin is not set # CONFIG_PACKAGE_br2684ctl is not set # # NMAP Suite # # CONFIG_PACKAGE_ncat is not set # CONFIG_PACKAGE_ncat-ssl is not set # CONFIG_PACKAGE_ndiff is not set # CONFIG_PACKAGE_nmap is not set # CONFIG_PACKAGE_nmap-ssl is not set # CONFIG_PACKAGE_nping is not set # # NTRIP # # CONFIG_PACKAGE_ntripcaster is not set # CONFIG_PACKAGE_ntripclient is not set # CONFIG_PACKAGE_ntripserver is not set # # NeteaseMusic # # CONFIG_PACKAGE_UnblockNeteaseMusic is not set # CONFIG_PACKAGE_UnblockNeteaseMusicGo is not set # # OLSR.org network framework # # CONFIG_PACKAGE_oonf-dlep-proxy is not set # CONFIG_PACKAGE_oonf-dlep-radio is not set # CONFIG_PACKAGE_oonf-init-scripts is not set # CONFIG_PACKAGE_oonf-olsrd2 is not set # # Open vSwitch # # CONFIG_PACKAGE_openvswitch is not set # CONFIG_PACKAGE_openvswitch-ovn-host is not set # CONFIG_PACKAGE_openvswitch-ovn-north is not set # CONFIG_PACKAGE_openvswitch-python is not set # CONFIG_PACKAGE_openvswitch-python3 is not set # # OpenLDAP # # CONFIG_PACKAGE_libopenldap is not set CONFIG_OPENLDAP_DEBUG=y # CONFIG_OPENLDAP_CRYPT is not set # CONFIG_OPENLDAP_MONITOR is not set # CONFIG_OPENLDAP_DB47 is not set # CONFIG_OPENLDAP_ICU is not set # CONFIG_PACKAGE_openldap-server is not set # CONFIG_PACKAGE_openldap-utils is not set # # P2P # # CONFIG_PACKAGE_amule is not set # CONFIG_AMULE_CRYPTOPP_STATIC_LINKING is not set # CONFIG_PACKAGE_antileech is not set # # Printing # # CONFIG_PACKAGE_p910nd is not set # # Project V # CONFIG_PACKAGE_v2ray=y # # V2Ray Configuration # # CONFIG_V2RAY_COMPRESS_GOPROXY is not set # CONFIG_V2RAY_JSON_V2CTL is not set CONFIG_V2RAY_JSON_INTERNAL=y # CONFIG_V2RAY_JSON_NONE is not set CONFIG_V2RAY_EXCLUDE_V2CTL=y CONFIG_V2RAY_EXCLUDE_ASSETS=y CONFIG_V2RAY_COMPRESS_UPX=y CONFIG_V2RAY_DISABLE_NONE=y # CONFIG_V2RAY_DISABLE_CUSTOM is not set # CONFIG_PACKAGE_v2ray-plugin is not set # CONFIG_v2ray-plugin_INCLUDE_GOPROXY is not set # # Routing and Redirection # # CONFIG_PACKAGE_babel-pinger is not set # CONFIG_PACKAGE_babeld is not set # CONFIG_PACKAGE_batmand is not set # CONFIG_PACKAGE_bcp38 is not set # CONFIG_PACKAGE_bird1-ipv4 is not set # CONFIG_PACKAGE_bird1-ipv4-uci is not set # CONFIG_PACKAGE_bird1-ipv6 is not set # CONFIG_PACKAGE_bird1-ipv6-uci is not set # CONFIG_PACKAGE_bird1c-ipv4 is not set # CONFIG_PACKAGE_bird1c-ipv6 is not set # CONFIG_PACKAGE_bird1cl-ipv4 is not set # CONFIG_PACKAGE_bird1cl-ipv6 is not set # CONFIG_PACKAGE_bird2 is not set # CONFIG_PACKAGE_bird2c is not set # CONFIG_PACKAGE_bird2cl is not set # CONFIG_PACKAGE_bmx6 is not set # CONFIG_PACKAGE_bmx7 is not set # CONFIG_PACKAGE_cjdns is not set # CONFIG_PACKAGE_cjdns-tests is not set # CONFIG_PACKAGE_dcwapd is not set # CONFIG_PACKAGE_devlink is not set # CONFIG_PACKAGE_genl is not set # CONFIG_PACKAGE_igmpproxy is not set # CONFIG_PACKAGE_ip-bridge is not set CONFIG_PACKAGE_ip-full=y # CONFIG_PACKAGE_ip-tiny is not set # CONFIG_PACKAGE_lldpd is not set # CONFIG_PACKAGE_mcproxy is not set # CONFIG_PACKAGE_mrmctl is not set # CONFIG_PACKAGE_mwan3 is not set # CONFIG_PACKAGE_nstat is not set # CONFIG_PACKAGE_olsrd is not set # CONFIG_PACKAGE_prince is not set # CONFIG_PACKAGE_quagga is not set # CONFIG_PACKAGE_rdma is not set # CONFIG_PACKAGE_relayd is not set # CONFIG_PACKAGE_ss is not set # CONFIG_PACKAGE_sslh is not set # CONFIG_PACKAGE_tc is not set # CONFIG_PACKAGE_tcpproxy is not set # CONFIG_PACKAGE_vis is not set # # SSH # # CONFIG_PACKAGE_autossh is not set # CONFIG_PACKAGE_openssh-client is not set # CONFIG_PACKAGE_openssh-client-utils is not set # CONFIG_PACKAGE_openssh-keygen is not set # CONFIG_PACKAGE_openssh-moduli is not set # CONFIG_PACKAGE_openssh-server is not set # CONFIG_PACKAGE_openssh-server-pam is not set # CONFIG_PACKAGE_openssh-sftp-avahi-service is not set # CONFIG_PACKAGE_openssh-sftp-client is not set # CONFIG_PACKAGE_openssh-sftp-server is not set # CONFIG_PACKAGE_sshtunnel is not set # # THC-IPv6 attack and analyzing toolkit # # CONFIG_PACKAGE_thc-ipv6-address6 is not set # CONFIG_PACKAGE_thc-ipv6-alive6 is not set # CONFIG_PACKAGE_thc-ipv6-covert-send6 is not set # CONFIG_PACKAGE_thc-ipv6-covert-send6d is not set # CONFIG_PACKAGE_thc-ipv6-denial6 is not set # CONFIG_PACKAGE_thc-ipv6-detect-new-ip6 is not set # CONFIG_PACKAGE_thc-ipv6-detect-sniffer6 is not set # CONFIG_PACKAGE_thc-ipv6-dnsdict6 is not set # CONFIG_PACKAGE_thc-ipv6-dnsrevenum6 is not set # CONFIG_PACKAGE_thc-ipv6-dos-new-ip6 is not set # CONFIG_PACKAGE_thc-ipv6-dump-router6 is not set # CONFIG_PACKAGE_thc-ipv6-exploit6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-advertise6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-dhcps6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-dns6d is not set # CONFIG_PACKAGE_thc-ipv6-fake-dnsupdate6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-mipv6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-mld26 is not set # CONFIG_PACKAGE_thc-ipv6-fake-mld6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-mldrouter6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-router26 is not set # CONFIG_PACKAGE_thc-ipv6-fake-router6 is not set # CONFIG_PACKAGE_thc-ipv6-fake-solicitate6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-advertise6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-dhcpc6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-mld26 is not set # CONFIG_PACKAGE_thc-ipv6-flood-mld6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-mldrouter6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-router26 is not set # CONFIG_PACKAGE_thc-ipv6-flood-router6 is not set # CONFIG_PACKAGE_thc-ipv6-flood-solicitate6 is not set # CONFIG_PACKAGE_thc-ipv6-fragmentation6 is not set # CONFIG_PACKAGE_thc-ipv6-fuzz-dhcpc6 is not set # CONFIG_PACKAGE_thc-ipv6-fuzz-dhcps6 is not set # CONFIG_PACKAGE_thc-ipv6-fuzz-ip6 is not set # CONFIG_PACKAGE_thc-ipv6-implementation6 is not set # CONFIG_PACKAGE_thc-ipv6-implementation6d is not set # CONFIG_PACKAGE_thc-ipv6-inverse-lookup6 is not set # CONFIG_PACKAGE_thc-ipv6-kill-router6 is not set # CONFIG_PACKAGE_thc-ipv6-ndpexhaust6 is not set # CONFIG_PACKAGE_thc-ipv6-node-query6 is not set # CONFIG_PACKAGE_thc-ipv6-parasite6 is not set # CONFIG_PACKAGE_thc-ipv6-passive-discovery6 is not set # CONFIG_PACKAGE_thc-ipv6-randicmp6 is not set # CONFIG_PACKAGE_thc-ipv6-redir6 is not set # CONFIG_PACKAGE_thc-ipv6-rsmurf6 is not set # CONFIG_PACKAGE_thc-ipv6-sendpees6 is not set # CONFIG_PACKAGE_thc-ipv6-sendpeesmp6 is not set # CONFIG_PACKAGE_thc-ipv6-smurf6 is not set # CONFIG_PACKAGE_thc-ipv6-thcping6 is not set # CONFIG_PACKAGE_thc-ipv6-toobig6 is not set # CONFIG_PACKAGE_thc-ipv6-trace6 is not set # # Time Synchronization # # CONFIG_PACKAGE_chrony is not set # CONFIG_PACKAGE_htpdate is not set # CONFIG_PACKAGE_linuxptp is not set # CONFIG_PACKAGE_ntp-keygen is not set # CONFIG_PACKAGE_ntp-utils is not set # CONFIG_PACKAGE_ntpclient is not set # CONFIG_PACKAGE_ntpd is not set # CONFIG_PACKAGE_ntpdate is not set # # VPN # # CONFIG_PACKAGE_chaosvpn is not set # CONFIG_PACKAGE_fastd is not set # CONFIG_PACKAGE_ipsec-tools is not set # CONFIG_PACKAGE_n2n-edge is not set # CONFIG_PACKAGE_n2n-supernode is not set # CONFIG_PACKAGE_ocserv is not set # CONFIG_PACKAGE_openconnect is not set # CONFIG_PACKAGE_opennhrp is not set # CONFIG_PACKAGE_openvpn-easy-rsa is not set # CONFIG_PACKAGE_openvpn-mbedtls is not set # CONFIG_PACKAGE_openvpn-nossl is not set # CONFIG_PACKAGE_openvpn-openssl is not set # CONFIG_PACKAGE_pptpd is not set # CONFIG_PACKAGE_softethervpn-base is not set # CONFIG_PACKAGE_softethervpn-bridge is not set # CONFIG_PACKAGE_softethervpn-client is not set # CONFIG_PACKAGE_softethervpn-server is not set # CONFIG_PACKAGE_softethervpn5-bridge is not set # CONFIG_PACKAGE_softethervpn5-client is not set # CONFIG_PACKAGE_softethervpn5-server is not set # CONFIG_PACKAGE_sstp-client is not set # CONFIG_PACKAGE_strongswan is not set # CONFIG_PACKAGE_strongswan-charon is not set # CONFIG_PACKAGE_strongswan-charon-cmd is not set # CONFIG_PACKAGE_strongswan-default is not set # CONFIG_PACKAGE_strongswan-ipsec is not set # CONFIG_PACKAGE_strongswan-isakmp is not set # CONFIG_PACKAGE_strongswan-libtls is not set # CONFIG_PACKAGE_strongswan-minimal is not set # CONFIG_PACKAGE_strongswan-mod-addrblock is not set # CONFIG_PACKAGE_strongswan-mod-aes is not set # CONFIG_PACKAGE_strongswan-mod-af-alg is not set # CONFIG_PACKAGE_strongswan-mod-agent is not set # CONFIG_PACKAGE_strongswan-mod-attr is not set # CONFIG_PACKAGE_strongswan-mod-attr-sql is not set # CONFIG_PACKAGE_strongswan-mod-blowfish is not set # CONFIG_PACKAGE_strongswan-mod-ccm is not set # CONFIG_PACKAGE_strongswan-mod-cmac is not set # CONFIG_PACKAGE_strongswan-mod-connmark is not set # CONFIG_PACKAGE_strongswan-mod-constraints is not set # CONFIG_PACKAGE_strongswan-mod-coupling is not set # CONFIG_PACKAGE_strongswan-mod-ctr is not set # CONFIG_PACKAGE_strongswan-mod-curl is not set # CONFIG_PACKAGE_strongswan-mod-curve25519 is not set # CONFIG_PACKAGE_strongswan-mod-des is not set # CONFIG_PACKAGE_strongswan-mod-dhcp is not set # CONFIG_PACKAGE_strongswan-mod-dnskey is not set # CONFIG_PACKAGE_strongswan-mod-duplicheck is not set # CONFIG_PACKAGE_strongswan-mod-eap-identity is not set # CONFIG_PACKAGE_strongswan-mod-eap-md5 is not set # CONFIG_PACKAGE_strongswan-mod-eap-mschapv2 is not set # CONFIG_PACKAGE_strongswan-mod-eap-radius is not set # CONFIG_PACKAGE_strongswan-mod-eap-tls is not set # CONFIG_PACKAGE_strongswan-mod-farp is not set # CONFIG_PACKAGE_strongswan-mod-fips-prf is not set # CONFIG_PACKAGE_strongswan-mod-forecast is not set # CONFIG_PACKAGE_strongswan-mod-gcm is not set # CONFIG_PACKAGE_strongswan-mod-gcrypt is not set # CONFIG_PACKAGE_strongswan-mod-gmp is not set # CONFIG_PACKAGE_strongswan-mod-gmpdh is not set # CONFIG_PACKAGE_strongswan-mod-ha is not set # CONFIG_PACKAGE_strongswan-mod-hmac is not set # CONFIG_PACKAGE_strongswan-mod-kernel-libipsec is not set # CONFIG_PACKAGE_strongswan-mod-kernel-netlink is not set # CONFIG_PACKAGE_strongswan-mod-ldap is not set # CONFIG_PACKAGE_strongswan-mod-led is not set # CONFIG_PACKAGE_strongswan-mod-load-tester is not set # CONFIG_PACKAGE_strongswan-mod-md4 is not set # CONFIG_PACKAGE_strongswan-mod-md5 is not set # CONFIG_PACKAGE_strongswan-mod-mysql is not set # CONFIG_PACKAGE_strongswan-mod-nonce is not set # CONFIG_PACKAGE_strongswan-mod-openssl is not set # CONFIG_PACKAGE_strongswan-mod-pem is not set # CONFIG_PACKAGE_strongswan-mod-pgp is not set # CONFIG_PACKAGE_strongswan-mod-pkcs1 is not set # CONFIG_PACKAGE_strongswan-mod-pkcs11 is not set # CONFIG_PACKAGE_strongswan-mod-pkcs12 is not set # CONFIG_PACKAGE_strongswan-mod-pkcs7 is not set # CONFIG_PACKAGE_strongswan-mod-pkcs8 is not set # CONFIG_PACKAGE_strongswan-mod-pubkey is not set # CONFIG_PACKAGE_strongswan-mod-random is not set # CONFIG_PACKAGE_strongswan-mod-rc2 is not set # CONFIG_PACKAGE_strongswan-mod-resolve is not set # CONFIG_PACKAGE_strongswan-mod-revocation is not set # CONFIG_PACKAGE_strongswan-mod-sha1 is not set # CONFIG_PACKAGE_strongswan-mod-sha2 is not set # CONFIG_PACKAGE_strongswan-mod-smp is not set # CONFIG_PACKAGE_strongswan-mod-socket-default is not set # CONFIG_PACKAGE_strongswan-mod-socket-dynamic is not set # CONFIG_PACKAGE_strongswan-mod-sql is not set # CONFIG_PACKAGE_strongswan-mod-sqlite is not set # CONFIG_PACKAGE_strongswan-mod-sshkey is not set # CONFIG_PACKAGE_strongswan-mod-stroke is not set # CONFIG_PACKAGE_strongswan-mod-test-vectors is not set # CONFIG_PACKAGE_strongswan-mod-uci is not set # CONFIG_PACKAGE_strongswan-mod-unity is not set # CONFIG_PACKAGE_strongswan-mod-updown is not set # CONFIG_PACKAGE_strongswan-mod-vici is not set # CONFIG_PACKAGE_strongswan-mod-whitelist is not set # CONFIG_PACKAGE_strongswan-mod-x509 is not set # CONFIG_PACKAGE_strongswan-mod-xauth-eap is not set # CONFIG_PACKAGE_strongswan-mod-xauth-generic is not set # CONFIG_PACKAGE_strongswan-mod-xcbc is not set # CONFIG_PACKAGE_strongswan-pki is not set # CONFIG_PACKAGE_strongswan-scepclient is not set # CONFIG_PACKAGE_strongswan-swanctl is not set # CONFIG_PACKAGE_tinc is not set # CONFIG_PACKAGE_uanytun is not set # CONFIG_PACKAGE_uanytun-nettle is not set # CONFIG_PACKAGE_uanytun-nocrypt is not set # CONFIG_PACKAGE_uanytun-sslcrypt is not set # CONFIG_PACKAGE_vpnc is not set # CONFIG_PACKAGE_vpnc-scripts is not set # CONFIG_PACKAGE_wireguard is not set # CONFIG_PACKAGE_xl2tpd is not set # CONFIG_PACKAGE_zerotier is not set # # Version Control Systems # # CONFIG_PACKAGE_fossil is not set # CONFIG_PACKAGE_git is not set # CONFIG_PACKAGE_git-http is not set # CONFIG_PACKAGE_subversion-client is not set # CONFIG_PACKAGE_subversion-libs is not set # CONFIG_PACKAGE_subversion-server is not set # # WWAN # # CONFIG_PACKAGE_adb-enablemodem is not set # CONFIG_PACKAGE_comgt is not set # CONFIG_PACKAGE_comgt-directip is not set # CONFIG_PACKAGE_comgt-ncm is not set # CONFIG_PACKAGE_uqmi is not set # # Web Servers/Proxies # # CONFIG_PACKAGE_apache is not set # CONFIG_PACKAGE_cgi-io is not set # CONFIG_PACKAGE_clamav is not set # CONFIG_PACKAGE_e2guardian is not set # CONFIG_PACKAGE_freshclam is not set # CONFIG_PACKAGE_frpc is not set # CONFIG_PACKAGE_frps is not set # CONFIG_PACKAGE_haproxy is not set # CONFIG_PACKAGE_haproxy-nossl is not set # CONFIG_PACKAGE_kcptun-client is not set # CONFIG_PACKAGE_kcptun-server is not set # CONFIG_PACKAGE_lighttpd is not set # CONFIG_PACKAGE_nginx is not set # CONFIG_PACKAGE_nginx-all-module is not set # CONFIG_PACKAGE_nginx-mod-luci is not set # CONFIG_PACKAGE_nginx-mod-luci-ssl is not set # CONFIG_PACKAGE_nginx-ssl is not set CONFIG_PACKAGE_pdnsd-alt=y # CONFIG_PACKAGE_polipo is not set # CONFIG_PACKAGE_privoxy is not set # CONFIG_PACKAGE_radicale-py2 is not set # CONFIG_PACKAGE_radicale-py3 is not set # CONFIG_PACKAGE_radicale2 is not set # CONFIG_PACKAGE_radicale2-examples is not set # CONFIG_PACKAGE_radicale2-src is not set # CONFIG_PACKAGE_shadowsocks-client is not set # CONFIG_PACKAGE_shadowsocks-libev-ss-local is not set # CONFIG_PACKAGE_shadowsocks-libev-ss-redir is not set # CONFIG_PACKAGE_shadowsocks-libev-ss-rules is not set # CONFIG_PACKAGE_shadowsocks-libev-ss-server is not set # CONFIG_PACKAGE_shadowsocks-libev-ss-tunnel is not set # CONFIG_PACKAGE_shadowsocksr-libev is not set # CONFIG_PACKAGE_shadowsocksr-libev-alt is not set # CONFIG_PACKAGE_shadowsocksr-libev-server is not set # CONFIG_PACKAGE_shadowsocksr-libev-ssr-local is not set # CONFIG_PACKAGE_sockd is not set # CONFIG_PACKAGE_socksify is not set # CONFIG_PACKAGE_spawn-fcgi is not set # CONFIG_PACKAGE_squid is not set # CONFIG_PACKAGE_srelay is not set # CONFIG_PACKAGE_tinyproxy is not set CONFIG_PACKAGE_uhttpd=y # CONFIG_PACKAGE_uhttpd-mod-lua is not set CONFIG_PACKAGE_uhttpd-mod-ubus=y # CONFIG_PACKAGE_uwsgi-cgi is not set # CONFIG_PACKAGE_uwsgi-cgi-luci-support is not set # # Wireless # # CONFIG_PACKAGE_aircrack-ng is not set # CONFIG_PACKAGE_airmon-ng is not set # # dial-in/up # # CONFIG_PACKAGE_rp-pppoe-common is not set # CONFIG_PACKAGE_rp-pppoe-relay is not set # CONFIG_PACKAGE_rp-pppoe-server is not set # # tcprelay # # CONFIG_PACKAGE_tcpbridge is not set # CONFIG_PACKAGE_tcpcapinfo is not set # CONFIG_PACKAGE_tcpliveplay is not set # CONFIG_PACKAGE_tcpprep is not set # CONFIG_PACKAGE_tcpreplay is not set # CONFIG_PACKAGE_tcpreplay-all is not set # CONFIG_PACKAGE_tcpreplay-edit is not set # CONFIG_PACKAGE_tcprewrite is not set # # wireless # # CONFIG_PACKAGE_dynapoint is not set # CONFIG_PACKAGE_horst is not set # CONFIG_PACKAGE_kismet-client is not set # CONFIG_PACKAGE_kismet-drone is not set # CONFIG_PACKAGE_kismet-server is not set # CONFIG_PACKAGE_pixiewps is not set # CONFIG_PACKAGE_reaver is not set # CONFIG_PACKAGE_wavemon is not set # CONFIG_PACKAGE_wifischedule is not set # CONFIG_PACKAGE_464xlat is not set # CONFIG_PACKAGE_6in4 is not set # CONFIG_PACKAGE_6rd is not set # CONFIG_PACKAGE_6to4 is not set # CONFIG_PACKAGE_acme is not set # CONFIG_PACKAGE_acme-dnsapi is not set # CONFIG_PACKAGE_adblock is not set # CONFIG_PACKAGE_adbyby is not set # CONFIG_PACKAGE_addrwatch is not set # CONFIG_PACKAGE_ahcpd is not set # CONFIG_PACKAGE_alfred is not set # CONFIG_PACKAGE_apcupsd is not set # CONFIG_PACKAGE_apcupsd-cgi is not set # CONFIG_PACKAGE_apinger is not set # CONFIG_PACKAGE_arp-scan is not set # CONFIG_PACKAGE_baidupcs-web is not set # CONFIG_PACKAGE_banip is not set # CONFIG_PACKAGE_batctl-default is not set # CONFIG_PACKAGE_batctl-full is not set # CONFIG_PACKAGE_batctl-tiny is not set # CONFIG_PACKAGE_beanstalkd is not set # CONFIG_PACKAGE_bmon is not set # CONFIG_PACKAGE_bwm-ng is not set # CONFIG_PACKAGE_chat is not set # CONFIG_PACKAGE_cifsmount is not set # CONFIG_PACKAGE_coap-server is not set # CONFIG_PACKAGE_conserver is not set # CONFIG_PACKAGE_cshark is not set # CONFIG_PACKAGE_daemonlogger is not set # CONFIG_PACKAGE_darkstat is not set # CONFIG_PACKAGE_dhcpcd is not set # CONFIG_PACKAGE_dmapd is not set # CONFIG_PACKAGE_ds-lite is not set # CONFIG_PACKAGE_dsmboot is not set # CONFIG_PACKAGE_eapol-test is not set # CONFIG_PACKAGE_eapol-test-openssl is not set # CONFIG_PACKAGE_eapol-test-wolfssl is not set # CONFIG_PACKAGE_esniper is not set # CONFIG_PACKAGE_etherwake is not set # CONFIG_PACKAGE_ethtool is not set # CONFIG_PACKAGE_fakeidentd is not set # CONFIG_PACKAGE_foolsm is not set # CONFIG_PACKAGE_fping is not set # CONFIG_PACKAGE_gnunet is not set # CONFIG_PACKAGE_gre is not set # CONFIG_PACKAGE_hnet-full is not set # CONFIG_PACKAGE_hnet-full-l2tp is not set # CONFIG_PACKAGE_hnet-full-secure is not set # CONFIG_PACKAGE_hnetd-nossl is not set # CONFIG_PACKAGE_hnetd-openssl is not set # CONFIG_PACKAGE_hostapd is not set # CONFIG_PACKAGE_hostapd-basic is not set CONFIG_PACKAGE_hostapd-common=y # CONFIG_PACKAGE_hostapd-mini is not set # CONFIG_PACKAGE_hostapd-openssl is not set # CONFIG_PACKAGE_hostapd-utils is not set # CONFIG_PACKAGE_hostapd-wolfssl is not set # CONFIG_PACKAGE_httping is not set # CONFIG_PACKAGE_httping-nossl is not set # CONFIG_PACKAGE_https_dns_proxy is not set # CONFIG_PACKAGE_i2pd is not set # CONFIG_PACKAGE_ibrdtn-tools is not set # CONFIG_PACKAGE_ibrdtnd is not set # CONFIG_PACKAGE_ifstat is not set # CONFIG_PACKAGE_iftop is not set # CONFIG_PACKAGE_iiod is not set # CONFIG_PACKAGE_iotivity is not set # CONFIG_PACKAGE_iotivity-cpp is not set # CONFIG_PACKAGE_iotivity-example-garage is not set # CONFIG_PACKAGE_iotivity-example-simple is not set # CONFIG_PACKAGE_iotivity-oic-middle is not set # CONFIG_PACKAGE_iotivity-resource-container-hue is not set # CONFIG_PACKAGE_iotivity-resource-container-lib is not set # CONFIG_PACKAGE_iotivity-resource-container-sample is not set # CONFIG_PACKAGE_iotivity-resource-directory-lib is not set # CONFIG_PACKAGE_iperf is not set # CONFIG_PACKAGE_iperf3 is not set # CONFIG_PACKAGE_iperf3-ssl is not set # CONFIG_PACKAGE_ipip is not set CONFIG_PACKAGE_ipset=y # CONFIG_PACKAGE_ipset-dns is not set # CONFIG_PACKAGE_ipset-lists is not set # CONFIG_PACKAGE_ipt2socks is not set # CONFIG_PACKAGE_iptraf-ng is not set # CONFIG_PACKAGE_iputils-arping is not set # CONFIG_PACKAGE_iputils-clockdiff is not set # CONFIG_PACKAGE_iputils-ping is not set # CONFIG_PACKAGE_iputils-ping6 is not set # CONFIG_PACKAGE_iputils-tftpd is not set # CONFIG_PACKAGE_iputils-tracepath is not set # CONFIG_PACKAGE_iputils-tracepath6 is not set # CONFIG_PACKAGE_iputils-traceroute6 is not set CONFIG_PACKAGE_iw=y # CONFIG_PACKAGE_iw-full is not set # CONFIG_PACKAGE_jool is not set # CONFIG_PACKAGE_jool-tools is not set # CONFIG_PACKAGE_keepalived is not set # CONFIG_PACKAGE_knxd is not set # CONFIG_PACKAGE_kplex is not set # CONFIG_PACKAGE_krb5-client is not set # CONFIG_PACKAGE_krb5-libs is not set # CONFIG_PACKAGE_krb5-server is not set CONFIG_PACKAGE_libipset=y # CONFIG_PACKAGE_linknx is not set # CONFIG_PACKAGE_lispd is not set # CONFIG_PACKAGE_mac-telnet-client is not set # CONFIG_PACKAGE_mac-telnet-discover is not set # CONFIG_PACKAGE_mac-telnet-ping is not set # CONFIG_PACKAGE_mac-telnet-server is not set # CONFIG_PACKAGE_map is not set # CONFIG_PACKAGE_memcached is not set # CONFIG_PACKAGE_microsocks is not set # CONFIG_PACKAGE_mii-tool is not set # CONFIG_PACKAGE_mikrotik-btest is not set # CONFIG_PACKAGE_mini_snmpd is not set # CONFIG_PACKAGE_minimalist-pcproxy is not set # CONFIG_PACKAGE_modemmanager is not set # CONFIG_PACKAGE_mosquitto-client-nossl is not set # CONFIG_PACKAGE_mosquitto-client-ssl is not set # CONFIG_PACKAGE_mosquitto-nossl is not set # CONFIG_PACKAGE_mosquitto-ssl is not set # CONFIG_PACKAGE_mrd6 is not set # CONFIG_PACKAGE_mtr is not set # CONFIG_PACKAGE_nbd is not set # CONFIG_PACKAGE_nbd-server is not set # CONFIG_PACKAGE_ncp is not set # CONFIG_PACKAGE_ndppd is not set # CONFIG_PACKAGE_netcat is not set # CONFIG_PACKAGE_netdiscover is not set # CONFIG_PACKAGE_netperf is not set # CONFIG_PACKAGE_nextdns is not set CONFIG_PACKAGE_nlbwmon=y # CONFIG_PACKAGE_noddos is not set # CONFIG_PACKAGE_noping is not set # CONFIG_PACKAGE_npc is not set # CONFIG_PACKAGE_nut is not set # CONFIG_PACKAGE_obfsproxy is not set # CONFIG_PACKAGE_obfsproxy-src is not set # CONFIG_PACKAGE_odhcp6c is not set # CONFIG_PACKAGE_odhcpd is not set # CONFIG_PACKAGE_odhcpd-ipv6only is not set # CONFIG_PACKAGE_ola is not set # CONFIG_PACKAGE_omcproxy is not set # CONFIG_PACKAGE_oping is not set # CONFIG_PACKAGE_pagekitec is not set # CONFIG_PACKAGE_pen is not set # CONFIG_PACKAGE_pimbd is not set # CONFIG_PACKAGE_pingcheck is not set # CONFIG_PACKAGE_port-mirroring is not set # CONFIG_PACKAGE_portmap is not set CONFIG_PACKAGE_ppp=y # CONFIG_PACKAGE_ppp-mod-passwordfd is not set # CONFIG_PACKAGE_ppp-mod-pppoa is not set CONFIG_PACKAGE_ppp-mod-pppoe=y # CONFIG_PACKAGE_ppp-mod-pppol2tp is not set # CONFIG_PACKAGE_ppp-mod-pptp is not set # CONFIG_PACKAGE_ppp-mod-radius is not set # CONFIG_PACKAGE_ppp-multilink is not set # CONFIG_PACKAGE_pppdump is not set # CONFIG_PACKAGE_pppoe-discovery is not set # CONFIG_PACKAGE_pppossh is not set # CONFIG_PACKAGE_pppstats is not set # CONFIG_PACKAGE_proto-bonding is not set # CONFIG_PACKAGE_proxychains-ng is not set # CONFIG_PACKAGE_radsecproxy is not set # CONFIG_PACKAGE_redsocks is not set # CONFIG_PACKAGE_redsocks2 is not set # CONFIG_PACKAGE_remserial is not set # CONFIG_PACKAGE_rpcbind is not set # CONFIG_PACKAGE_rssileds is not set # CONFIG_PACKAGE_rsyslog is not set # CONFIG_PACKAGE_samba36-client is not set # CONFIG_PACKAGE_samba36-net is not set # CONFIG_PACKAGE_samba36-server is not set # CONFIG_PACKAGE_samba4-admin is not set # CONFIG_PACKAGE_samba4-client is not set # CONFIG_PACKAGE_samba4-libs is not set # CONFIG_PACKAGE_samba4-server is not set # CONFIG_PACKAGE_samba4-utils is not set # CONFIG_PACKAGE_scapy is not set # CONFIG_PACKAGE_sctp is not set # CONFIG_PACKAGE_sctp-tools is not set # CONFIG_PACKAGE_seafile-ccnet is not set # CONFIG_PACKAGE_seafile-seahub is not set # CONFIG_PACKAGE_seafile-seahub-src is not set # CONFIG_PACKAGE_ser2net is not set # CONFIG_PACKAGE_simple-adblock is not set # CONFIG_PACKAGE_simple-obfs is not set # CONFIG_PACKAGE_simple-obfs-server is not set # CONFIG_PACKAGE_smartsnmpd is not set # CONFIG_PACKAGE_snmp-mibs is not set # CONFIG_PACKAGE_snmp-utils is not set # CONFIG_PACKAGE_snmpd is not set # CONFIG_PACKAGE_snmpd-static is not set # CONFIG_PACKAGE_snmptrapd is not set # CONFIG_PACKAGE_socat is not set # CONFIG_PACKAGE_softflowd is not set # CONFIG_PACKAGE_soloscli is not set # CONFIG_PACKAGE_stunnel is not set # CONFIG_PACKAGE_tayga is not set # CONFIG_PACKAGE_tcpdump is not set # CONFIG_PACKAGE_tcpdump-mini is not set # CONFIG_PACKAGE_tcpping is not set # CONFIG_PACKAGE_tor is not set # CONFIG_PACKAGE_tor-gencert is not set # CONFIG_PACKAGE_tor-geoip is not set # CONFIG_PACKAGE_tor-resolve is not set # CONFIG_PACKAGE_travelmate is not set # CONFIG_PACKAGE_trojan is not set # CONFIG_PACKAGE_u2pnpd is not set CONFIG_PACKAGE_uclient-fetch=y # CONFIG_PACKAGE_udpxy is not set # CONFIG_PACKAGE_ulogd is not set # CONFIG_PACKAGE_umbim is not set # CONFIG_PACKAGE_umdns is not set # CONFIG_PACKAGE_usbip is not set # CONFIG_PACKAGE_vallumd is not set # CONFIG_PACKAGE_verysync is not set CONFIG_PACKAGE_vlmcsd=y # CONFIG_PACKAGE_vncrepeater is not set # CONFIG_PACKAGE_vnstat is not set # CONFIG_PACKAGE_vpnbypass is not set # CONFIG_PACKAGE_vsc7385-ucode-pb44 is not set # CONFIG_PACKAGE_vsc7395-ucode-pb44 is not set # CONFIG_PACKAGE_vti is not set # CONFIG_PACKAGE_vxlan is not set # CONFIG_PACKAGE_wakeonlan is not set # CONFIG_PACKAGE_wpa-cli is not set # CONFIG_PACKAGE_wpa-supplicant is not set # CONFIG_WPA_RFKILL_SUPPORT is not set CONFIG_WPA_MSG_MIN_PRIORITY=3 # CONFIG_WPA_WOLFSSL is not set # CONFIG_DRIVER_WEXT_SUPPORT is not set CONFIG_DRIVER_11N_SUPPORT=y CONFIG_DRIVER_11AC_SUPPORT=y CONFIG_DRIVER_11W_SUPPORT=y # CONFIG_PACKAGE_wpa-supplicant-basic is not set # CONFIG_PACKAGE_wpa-supplicant-mesh-openssl is not set # CONFIG_PACKAGE_wpa-supplicant-mesh-wolfssl is not set # CONFIG_PACKAGE_wpa-supplicant-mini is not set # CONFIG_PACKAGE_wpa-supplicant-openssl is not set # CONFIG_PACKAGE_wpa-supplicant-p2p is not set # CONFIG_PACKAGE_wpa-supplicant-wolfssl is not set # CONFIG_PACKAGE_wpad is not set # CONFIG_PACKAGE_wpad-basic is not set # CONFIG_PACKAGE_wpad-mesh-openssl is not set # CONFIG_PACKAGE_wpad-mesh-wolfssl is not set # CONFIG_PACKAGE_wpad-mini is not set CONFIG_PACKAGE_wpad-openssl=y # CONFIG_PACKAGE_wpad-wolfssl is not set # CONFIG_PACKAGE_wpan-tools is not set # CONFIG_PACKAGE_wwan is not set # CONFIG_PACKAGE_xinetd is not set # # Sound # # CONFIG_PACKAGE_alsa-utils is not set # CONFIG_PACKAGE_alsa-utils-seq is not set # CONFIG_PACKAGE_alsa-utils-tests is not set # CONFIG_PACKAGE_espeak is not set # CONFIG_PACKAGE_faad2 is not set # CONFIG_PACKAGE_fdk-aac is not set # CONFIG_PACKAGE_forked-daapd is not set # CONFIG_PACKAGE_ices is not set # CONFIG_PACKAGE_lame is not set # CONFIG_PACKAGE_lame-lib is not set # CONFIG_PACKAGE_liblo-utils is not set # CONFIG_PACKAGE_madplay is not set # CONFIG_PACKAGE_madplay-alsa is not set # CONFIG_PACKAGE_moc is not set # CONFIG_PACKAGE_mpc is not set # CONFIG_PACKAGE_mpd-avahi-service is not set # CONFIG_PACKAGE_mpd-full is not set # CONFIG_PACKAGE_mpd-mini is not set # CONFIG_PACKAGE_mpg123 is not set # CONFIG_PACKAGE_opus-tools is not set # CONFIG_PACKAGE_pianod is not set # CONFIG_PACKAGE_pianod-client is not set # CONFIG_PACKAGE_portaudio is not set # CONFIG_PACKAGE_pulseaudio-daemon is not set # CONFIG_PACKAGE_pulseaudio-daemon-avahi is not set # CONFIG_PACKAGE_shairplay is not set # CONFIG_PACKAGE_shairport-sync-mbedtls is not set # CONFIG_PACKAGE_shairport-sync-mini is not set # CONFIG_PACKAGE_shairport-sync-openssl is not set # CONFIG_PACKAGE_shine is not set # CONFIG_PACKAGE_sox is not set # CONFIG_PACKAGE_squeezelite-full is not set # CONFIG_PACKAGE_squeezelite-mini is not set # CONFIG_PACKAGE_svox is not set # CONFIG_PACKAGE_upmpdcli is not set # # Utilities # # # Boot Loaders # # CONFIG_PACKAGE_fconfig is not set # CONFIG_PACKAGE_rbcfg is not set CONFIG_PACKAGE_uboot-envtools=y # # Compression # # CONFIG_PACKAGE_bsdtar is not set # CONFIG_PACKAGE_bzip2 is not set # CONFIG_PACKAGE_gzip is not set # CONFIG_PACKAGE_pigz is not set # CONFIG_PACKAGE_unrar is not set # CONFIG_PACKAGE_unzip is not set # CONFIG_PACKAGE_xz-utils is not set # CONFIG_PACKAGE_zip is not set # CONFIG_PACKAGE_zstd is not set # # Database # # CONFIG_PACKAGE_mariadb-common is not set # # Disc # # CONFIG_PACKAGE_blkdiscard is not set # CONFIG_PACKAGE_blkid is not set # CONFIG_PACKAGE_blockdev is not set # CONFIG_PACKAGE_cfdisk is not set # CONFIG_PACKAGE_cgdisk is not set # CONFIG_PACKAGE_eject is not set # CONFIG_PACKAGE_fdisk is not set # CONFIG_PACKAGE_findfs is not set # CONFIG_PACKAGE_fixparts is not set # CONFIG_PACKAGE_gdisk is not set # CONFIG_PACKAGE_hd-idle is not set # CONFIG_PACKAGE_hdparm is not set # CONFIG_PACKAGE_lsblk is not set # CONFIG_PACKAGE_lvm2 is not set # CONFIG_PACKAGE_mdadm is not set # CONFIG_PACKAGE_parted is not set # CONFIG_PACKAGE_partx-utils is not set # CONFIG_PACKAGE_sfdisk is not set # CONFIG_PACKAGE_sgdisk is not set # CONFIG_PACKAGE_wipefs is not set # # Editors # # CONFIG_PACKAGE_joe is not set # CONFIG_PACKAGE_nano is not set # CONFIG_PACKAGE_vim is not set # CONFIG_PACKAGE_vim-full is not set # CONFIG_PACKAGE_vim-fuller is not set # CONFIG_PACKAGE_vim-help is not set # CONFIG_PACKAGE_vim-runtime is not set # CONFIG_PACKAGE_zile is not set # # Encryption # # CONFIG_PACKAGE_ccrypt is not set # CONFIG_PACKAGE_certtool is not set # CONFIG_PACKAGE_cryptsetup is not set # CONFIG_PACKAGE_cryptsetup-openssl is not set # CONFIG_PACKAGE_gnupg is not set # CONFIG_PACKAGE_gnutls-utils is not set # CONFIG_PACKAGE_gpgv is not set # CONFIG_PACKAGE_keyctl is not set # CONFIG_PACKAGE_px5g-mbedtls is not set # CONFIG_PACKAGE_px5g-standalone is not set # CONFIG_PACKAGE_stoken is not set # # Filesystem # # CONFIG_PACKAGE_acl is not set # CONFIG_PACKAGE_antfs-mount is not set # CONFIG_PACKAGE_attr is not set # CONFIG_PACKAGE_badblocks is not set # CONFIG_PACKAGE_btrfs-progs is not set # CONFIG_PACKAGE_chattr is not set # CONFIG_PACKAGE_debugfs is not set # CONFIG_PACKAGE_dosfstools is not set # CONFIG_PACKAGE_dumpe2fs is not set # CONFIG_PACKAGE_e2freefrag is not set # CONFIG_PACKAGE_e2fsprogs is not set # CONFIG_PACKAGE_f2fs-tools is not set # CONFIG_PACKAGE_f2fsck is not set # CONFIG_PACKAGE_filefrag is not set # CONFIG_PACKAGE_fstrim is not set # CONFIG_PACKAGE_fuse-utils is not set # CONFIG_PACKAGE_hfsfsck is not set # CONFIG_PACKAGE_lsattr is not set # CONFIG_PACKAGE_mkf2fs is not set # CONFIG_PACKAGE_mkhfs is not set # CONFIG_PACKAGE_ncdu is not set # CONFIG_PACKAGE_nfs-utils is not set # CONFIG_PACKAGE_nfs-utils-libs is not set # CONFIG_PACKAGE_ntfs-3g is not set # CONFIG_PACKAGE_ntfs-3g-low is not set # CONFIG_PACKAGE_ntfs-3g-utils is not set # CONFIG_PACKAGE_owfs is not set # CONFIG_PACKAGE_owshell is not set # CONFIG_PACKAGE_resize2fs is not set # CONFIG_PACKAGE_squashfs-tools-mksquashfs is not set # CONFIG_PACKAGE_squashfs-tools-unsquashfs is not set # CONFIG_PACKAGE_swap-utils is not set # CONFIG_PACKAGE_sysfsutils is not set # CONFIG_PACKAGE_tune2fs is not set # CONFIG_PACKAGE_xfs-admin is not set # CONFIG_PACKAGE_xfs-fsck is not set # CONFIG_PACKAGE_xfs-growfs is not set # CONFIG_PACKAGE_xfs-mkfs is not set # # Image Manipulation # # CONFIG_PACKAGE_jpeg-tools is not set # CONFIG_PACKAGE_tiff-utils is not set # # Microcontroller programming # # CONFIG_PACKAGE_avrdude is not set # CONFIG_PACKAGE_dfu-programmer is not set # CONFIG_PACKAGE_stm32flash is not set # # RTKLIB Suite # # CONFIG_PACKAGE_convbin is not set # CONFIG_PACKAGE_pos2kml is not set # CONFIG_PACKAGE_rnx2rtkp is not set # CONFIG_PACKAGE_rtkrcv is not set # CONFIG_PACKAGE_str2str is not set # # Shells # # CONFIG_PACKAGE_bash is not set # CONFIG_PACKAGE_klish is not set # CONFIG_PACKAGE_mksh is not set # CONFIG_PACKAGE_tcsh is not set # CONFIG_PACKAGE_zsh is not set # # Terminal # # CONFIG_PACKAGE_agetty is not set # CONFIG_PACKAGE_dvtm is not set # CONFIG_PACKAGE_minicom is not set # CONFIG_PACKAGE_picocom is not set # CONFIG_PACKAGE_rtty-mbedtls is not set # CONFIG_PACKAGE_rtty-nossl is not set # CONFIG_PACKAGE_rtty-openssl is not set # CONFIG_PACKAGE_rtty-wolfssl is not set # CONFIG_PACKAGE_screen is not set # CONFIG_PACKAGE_script-utils is not set # CONFIG_PACKAGE_serialconsole is not set # CONFIG_PACKAGE_setterm is not set # CONFIG_PACKAGE_tio is not set # CONFIG_PACKAGE_tmux is not set # CONFIG_PACKAGE_ttyd is not set # CONFIG_PACKAGE_wall is not set # # Virtualization # # # Zoneinfo # # CONFIG_PACKAGE_zoneinfo-africa is not set # CONFIG_PACKAGE_zoneinfo-asia is not set # CONFIG_PACKAGE_zoneinfo-atlantic is not set # CONFIG_PACKAGE_zoneinfo-australia-nz is not set # CONFIG_PACKAGE_zoneinfo-core is not set # CONFIG_PACKAGE_zoneinfo-europe is not set # CONFIG_PACKAGE_zoneinfo-india is not set # CONFIG_PACKAGE_zoneinfo-northamerica is not set # CONFIG_PACKAGE_zoneinfo-pacific is not set # CONFIG_PACKAGE_zoneinfo-poles is not set # CONFIG_PACKAGE_zoneinfo-simple is not set # CONFIG_PACKAGE_zoneinfo-southamerica is not set # # database # # CONFIG_PACKAGE_pgsql-cli is not set # CONFIG_PACKAGE_pgsql-cli-extra is not set # CONFIG_PACKAGE_pgsql-server is not set # CONFIG_PACKAGE_rrdcgi1 is not set # CONFIG_PACKAGE_rrdtool1 is not set # CONFIG_PACKAGE_sqlite3-cli is not set # CONFIG_PACKAGE_unixodbc-tools is not set # CONFIG_PACKAGE_adb is not set # CONFIG_PACKAGE_ap51-flash is not set # CONFIG_PACKAGE_at is not set # CONFIG_PACKAGE_bandwidthd is not set # CONFIG_PACKAGE_bandwidthd-pgsql is not set # CONFIG_PACKAGE_bandwidthd-php is not set # CONFIG_PACKAGE_bandwidthd-sqlite is not set # CONFIG_PACKAGE_banhostlist is not set # CONFIG_PACKAGE_bc is not set # CONFIG_PACKAGE_bluelog is not set # CONFIG_PACKAGE_bluez-daemon is not set # CONFIG_PACKAGE_bluez-utils is not set # CONFIG_PACKAGE_bluez-utils-extra is not set # CONFIG_PACKAGE_bonniexx is not set # CONFIG_PACKAGE_bsdiff is not set # CONFIG_PACKAGE_bspatch is not set # CONFIG_PACKAGE_cal is not set # CONFIG_PACKAGE_canutils is not set # CONFIG_PACKAGE_cgroupfs-mount is not set # CONFIG_PACKAGE_cmdpad is not set # CONFIG_PACKAGE_coap-client is not set # CONFIG_PACKAGE_collectd is not set CONFIG_PACKAGE_coremark=y # CONFIG_PACKAGE_coreutils is not set # CONFIG_PACKAGE_crconf is not set # CONFIG_PACKAGE_crelay is not set # CONFIG_PACKAGE_csstidy is not set # CONFIG_PACKAGE_ct-bugcheck is not set # CONFIG_PACKAGE_dbus is not set # CONFIG_PACKAGE_dfu-util is not set # CONFIG_PACKAGE_digitemp is not set # CONFIG_PACKAGE_digitemp-usb is not set # CONFIG_PACKAGE_dmesg is not set # # Kernel features for Docker # CONFIG_DOCKER_KERNEL_OPTIONS=y # CONFIG_DOCKER_SECCOMP is not set # CONFIG_DOCKER_RES_SHAPE is not set # # Network # # CONFIG_DOCKER_NET_OVERLAY is not set # CONFIG_DOCKER_NET_MACVLAN is not set # CONFIG_DOCKER_NET_TFTP is not set # # Storage # # CONFIG_DOCKER_STO_EXT4 is not set # CONFIG_DOCKER_STO_BTRFS is not set # CONFIG_PACKAGE_dropbearconvert is not set # CONFIG_PACKAGE_dtc is not set # CONFIG_PACKAGE_dump1090 is not set # CONFIG_PACKAGE_ecdsautils is not set # CONFIG_PACKAGE_elektra-kdb is not set # CONFIG_PACKAGE_evtest is not set # CONFIG_PACKAGE_extract is not set # CONFIG_PACKAGE_fdt-utils is not set # CONFIG_PACKAGE_file is not set # CONFIG_PACKAGE_findutils-find is not set # CONFIG_PACKAGE_findutils-locate is not set # CONFIG_PACKAGE_findutils-xargs is not set # CONFIG_PACKAGE_flashrom is not set # CONFIG_PACKAGE_flashrom-pci is not set # CONFIG_PACKAGE_flashrom-spi is not set # CONFIG_PACKAGE_flashrom-usb is not set # CONFIG_PACKAGE_flent-tools is not set # CONFIG_PACKAGE_flock is not set # CONFIG_PACKAGE_fritz-caldata is not set # CONFIG_PACKAGE_fritz-tffs is not set # CONFIG_PACKAGE_ftdi_eeprom is not set # CONFIG_PACKAGE_gammu is not set # CONFIG_PACKAGE_gawk is not set # CONFIG_PACKAGE_getopt is not set # CONFIG_PACKAGE_giflib-utils is not set # CONFIG_PACKAGE_gkermit is not set # CONFIG_PACKAGE_gpioctl-sysfs is not set # CONFIG_PACKAGE_gpiod-tools is not set # CONFIG_PACKAGE_gpsd is not set # CONFIG_PACKAGE_gpsd-clients is not set # CONFIG_PACKAGE_grep is not set # CONFIG_PACKAGE_hamlib is not set # CONFIG_PACKAGE_haserl is not set # CONFIG_PACKAGE_haveged is not set # CONFIG_PACKAGE_hub-ctrl is not set # CONFIG_PACKAGE_hwclock is not set # CONFIG_PACKAGE_hwloc-utils is not set # CONFIG_PACKAGE_i2c-tools is not set # CONFIG_PACKAGE_iconv is not set # CONFIG_PACKAGE_iio-utils is not set # CONFIG_PACKAGE_inotifywait is not set # CONFIG_PACKAGE_inotifywatch is not set # CONFIG_PACKAGE_io is not set # CONFIG_PACKAGE_irqbalance is not set # CONFIG_PACKAGE_iwcap is not set # CONFIG_PACKAGE_iwinfo is not set # CONFIG_PACKAGE_jq is not set CONFIG_PACKAGE_jshn=y # CONFIG_PACKAGE_kmod is not set # CONFIG_PACKAGE_lcd4linux-custom is not set # CONFIG_PACKAGE_lcdproc-clients is not set # CONFIG_PACKAGE_lcdproc-drivers is not set # CONFIG_PACKAGE_lcdproc-server is not set # CONFIG_PACKAGE_less is not set # CONFIG_PACKAGE_less-wide is not set # CONFIG_PACKAGE_libimobiledevice-utils is not set CONFIG_PACKAGE_libjson-script=y # CONFIG_PACKAGE_libplist-utils is not set # CONFIG_PACKAGE_libsysrepo is not set # CONFIG_PACKAGE_libusbmuxd-utils is not set # CONFIG_PACKAGE_libxml2-utils is not set # CONFIG_PACKAGE_lm-sensors is not set # CONFIG_PACKAGE_lm-sensors-detect is not set # CONFIG_PACKAGE_logger is not set # CONFIG_PACKAGE_logrotate is not set # CONFIG_PACKAGE_look is not set # CONFIG_PACKAGE_losetup is not set # CONFIG_PACKAGE_lrzsz is not set # CONFIG_PACKAGE_lscpu is not set # CONFIG_PACKAGE_lsof is not set # CONFIG_PACKAGE_lxc is not set # CONFIG_PACKAGE_lxc-unprivileged is not set # CONFIG_PACKAGE_maccalc is not set # CONFIG_PACKAGE_macchanger is not set # CONFIG_PACKAGE_mbedtls-util is not set # CONFIG_PACKAGE_mbim-utils is not set # CONFIG_PACKAGE_mbtools is not set # CONFIG_PACKAGE_mc is not set # CONFIG_PACKAGE_mcookie is not set # CONFIG_PACKAGE_mmc-utils is not set # CONFIG_PACKAGE_moreutils is not set # CONFIG_PACKAGE_mount-utils is not set # CONFIG_PACKAGE_mpack is not set # CONFIG_PACKAGE_mt-st is not set # CONFIG_PACKAGE_namei is not set # CONFIG_PACKAGE_netopeer2-cli is not set # CONFIG_PACKAGE_netopeer2-keystored is not set # CONFIG_PACKAGE_netopeer2-server is not set # CONFIG_PACKAGE_netwhere is not set # CONFIG_PACKAGE_nsenter is not set # CONFIG_PACKAGE_oath-toolkit is not set # CONFIG_PACKAGE_open-plc-utils is not set # CONFIG_PACKAGE_open2300 is not set # CONFIG_PACKAGE_openobex is not set # CONFIG_PACKAGE_openobex-apps is not set # CONFIG_PACKAGE_openocd is not set # CONFIG_PACKAGE_opensc-utils is not set CONFIG_PACKAGE_openssl-util=y # CONFIG_PACKAGE_openzwave is not set # CONFIG_PACKAGE_openzwave-config is not set # CONFIG_PACKAGE_owipcalc is not set # CONFIG_PACKAGE_pciutils is not set # CONFIG_PACKAGE_pcsc-tools is not set # CONFIG_PACKAGE_pcscd is not set # CONFIG_PACKAGE_pps-tools is not set # CONFIG_PACKAGE_prlimit is not set # CONFIG_PACKAGE_procps-ng is not set # CONFIG_PACKAGE_progress is not set # CONFIG_PACKAGE_prometheus-node-exporter-lua is not set # CONFIG_PACKAGE_pv is not set # CONFIG_PACKAGE_qmi-utils is not set # CONFIG_PACKAGE_qrencode is not set # CONFIG_PACKAGE_rclone is not set # CONFIG_PACKAGE_relayctl is not set # CONFIG_PACKAGE_rename is not set # CONFIG_PACKAGE_rng-tools is not set # CONFIG_PACKAGE_rtl-ais is not set # CONFIG_PACKAGE_rtl-sdr is not set # CONFIG_PACKAGE_rtl_433 is not set # CONFIG_PACKAGE_sane-backends is not set # CONFIG_PACKAGE_sane-daemon is not set # CONFIG_PACKAGE_sane-frontends is not set # CONFIG_PACKAGE_setserial is not set # CONFIG_PACKAGE_shadow-utils is not set CONFIG_PACKAGE_shellsync=y # CONFIG_PACKAGE_sispmctl is not set # CONFIG_PACKAGE_slide-switch is not set # CONFIG_PACKAGE_smartd is not set # CONFIG_PACKAGE_smartmontools is not set # CONFIG_PACKAGE_smartmontools-drivedb is not set # CONFIG_PACKAGE_smstools3 is not set # CONFIG_PACKAGE_sockread is not set # CONFIG_PACKAGE_spi-tools is not set # CONFIG_PACKAGE_spidev-test is not set # CONFIG_PACKAGE_strace is not set CONFIG_STRACE_NONE=y # CONFIG_STRACE_LIBDW is not set # CONFIG_STRACE_LIBUNWIND is not set # CONFIG_PACKAGE_stress is not set # CONFIG_PACKAGE_sumo is not set # CONFIG_PACKAGE_sysrepo is not set # CONFIG_PACKAGE_sysrepocfg is not set # CONFIG_PACKAGE_sysrepoctl is not set # CONFIG_PACKAGE_sysstat is not set # CONFIG_PACKAGE_tar is not set # CONFIG_PACKAGE_taskwarrior is not set # CONFIG_PACKAGE_tini is not set # CONFIG_PACKAGE_tracertools is not set # CONFIG_PACKAGE_tree is not set # CONFIG_PACKAGE_triggerhappy is not set # CONFIG_PACKAGE_udns-dnsget is not set # CONFIG_PACKAGE_udns-ex-rdns is not set # CONFIG_PACKAGE_udns-rblcheck is not set # CONFIG_PACKAGE_ugps is not set # CONFIG_PACKAGE_uledd is not set # CONFIG_PACKAGE_unshare is not set # CONFIG_PACKAGE_usb-modeswitch is not set # CONFIG_PACKAGE_usbmuxd is not set # CONFIG_PACKAGE_usbreset is not set # CONFIG_PACKAGE_usbutils is not set # CONFIG_PACKAGE_uuidd is not set # CONFIG_PACKAGE_uuidgen is not set # CONFIG_PACKAGE_uvcdynctrl is not set # CONFIG_PACKAGE_v4l-utils is not set # CONFIG_PACKAGE_view1090 is not set # CONFIG_PACKAGE_watchcat is not set # CONFIG_PACKAGE_whereis is not set # CONFIG_PACKAGE_wifitoggle is not set # CONFIG_PACKAGE_xsltproc is not set # CONFIG_PACKAGE_xxd is not set # CONFIG_PACKAGE_yanglint is not set # CONFIG_PACKAGE_yara is not set # CONFIG_PACKAGE_yunbridge is not set # # Xorg # # # font-utils # # CONFIG_PACKAGE_fontconfig is not set
JoeKun / FileMD5HashLibrary for computing MD5 hashes of files with small memory usage on iOS and OS X
chrisneagu / FTC Skystone Dark Angels Romania 2020NOTICE This repository contains the public FTC SDK for the SKYSTONE (2019-2020) competition season. If you are looking for the current season's FTC SDK software, please visit the new and permanent home of the public FTC SDK: FtcRobotController repository Welcome! This GitHub repository contains the source code that is used to build an Android app to control a FIRST Tech Challenge competition robot. To use this SDK, download/clone the entire project to your local computer. Getting Started If you are new to robotics or new to the FIRST Tech Challenge, then you should consider reviewing the FTC Blocks Tutorial to get familiar with how to use the control system: FTC Blocks Online Tutorial Even if you are an advanced Java programmer, it is helpful to start with the FTC Blocks tutorial, and then migrate to the OnBot Java Tool or to Android Studio afterwards. Downloading the Project If you are an Android Studio programmer, there are several ways to download this repo. Note that if you use the Blocks or OnBot Java Tool to program your robot, then you do not need to download this repository. If you are a git user, you can clone the most current version of the repository: git clone https://github.com/FIRST-Tech-Challenge/SKYSTONE.git Or, if you prefer, you can use the "Download Zip" button available through the main repository page. Downloading the project as a .ZIP file will keep the size of the download manageable. You can also download the project folder (as a .zip or .tar.gz archive file) from the Downloads subsection of the Releases page for this repository. Once you have downloaded and uncompressed (if needed) your folder, you can use Android Studio to import the folder ("Import project (Eclipse ADT, Gradle, etc.)"). Getting Help User Documentation and Tutorials FIRST maintains online documentation with information and tutorials on how to use the FIRST Tech Challenge software and robot control system. You can access this documentation using the following link: SKYSTONE Online Documentation Note that the online documentation is an "evergreen" document that is constantly being updated and edited. It contains the most current information about the FIRST Tech Challenge software and control system. Javadoc Reference Material The Javadoc reference documentation for the FTC SDK is now available online. Click on the following link to view the FTC SDK Javadoc documentation as a live website: FTC Javadoc Documentation Documentation for the FTC SDK is also included with this repository. There is a subfolder called "doc" which contains several subfolders: The folder "apk" contains the .apk files for the FTC Driver Station and FTC Robot Controller apps. The folder "javadoc" contains the JavaDoc user documentation for the FTC SDK. Online User Forum For technical questions regarding the Control System or the FTC SDK, please visit the FTC Technology forum: FTC Technology Forum Release Information Version 5.5 (20200824-090813) Version 5.5 requires Android Studio 4.0 or later. New features Adds support for calling custom Java classes from Blocks OpModes (fixes SkyStone issue #161). Classes must be in the org.firstinspires.ftc.teamcode package. Methods must be public static and have no more than 21 parameters. Parameters declared as OpMode, LinearOpMode, Telemetry, and HardwareMap are supported and the argument is provided automatically, regardless of the order of the parameters. On the block, the sockets for those parameters are automatically filled in. Parameters declared as char or java.lang.Character will accept any block that returns text and will only use the first character in the text. Parameters declared as boolean or java.lang.Boolean will accept any block that returns boolean. Parameters declared as byte, java.lang.Byte, short, java.lang.Short, int, java.lang.Integer, long, or java.lang.Long, will accept any block that returns a number and will round that value to the nearest whole number. Parameters declared as float, java.lang.Float, double, java.lang.Double will accept any block that returns a number. Adds telemetry API method for setting display format Classic Monospace HTML (certain tags only) Adds blocks support for switching cameras. Adds Blocks support for TensorFlow Object Detection with a custom model. Adds support for uploading a custom TensorFlow Object Detection model in the Manage page, which is especially useful for Blocks and OnBotJava users. Shows new Control Hub blink codes when the WiFi band is switched using the Control Hub's button (only possible on Control Hub OS 1.1.2) Adds new warnings which can be disabled in the Advanced RC Settings Mismatched app versions warning Unnecessary 2.4 GHz WiFi usage warning REV Hub is running outdated firmware (older than version 1.8.2) Adds support for Sony PS4 gamepad, and reworks how gamepads work on the Driver Station Removes preference which sets gamepad type based on driver position. Replaced with menu which allows specifying type for gamepads with unknown VID and PID Attempts to auto-detect gamepad type based on USB VID and PID If gamepad VID and PID is not known, use type specified by user for that VID and PID If gamepad VID and PID is not known AND the user has not specified a type for that VID and PID, an educated guess is made about how to map the gamepad Driver Station will now attempt to automatically recover from a gamepad disconnecting, and re-assign it to the position it was assigned to when it dropped If only one gamepad is assigned and it drops: it can be recovered If two gamepads are assigned, and have different VID/PID signatures, and only one drops: it will be recovered If two gamepads are assigned, and have different VID/PID signatures, and BOTH drop: both will be recovered If two gamepads are assigned, and have the same VID/PID signatures, and only one drops: it will be recovered If two gamepads are assigned, and have the same VID/PID signatures, and BOTH drop: neither will be recovered, because of the ambiguity of the gamepads when they re-appear on the USB bus. There is currently one known edge case: if there are two gamepads with the same VID/PID signature plugged in, but only one is assigned, and they BOTH drop, it's a 50-50 chance of which one will be chosen for automatic recovery to the assigned position: it is determined by whichever one is re-enumerated first by the USB bus controller. Adds landscape user interface to Driver Station New feature: practice timer with audio cues New feature (Control Hub only): wireless network connection strength indicator (0-5 bars) New feature (Control Hub only): tapping on the ping/channel display will switch to an alternate display showing radio RX dBm and link speed (tap again to switch back) The layout will NOT autorotate. You can switch the layout from the Driver Station's settings menu. Breaking changes Removes support for Android versions 4.4 through 5.1 (KitKat and Lollipop). The minSdkVersion is now 23. Removes the deprecated LinearOpMode methods waitOneFullHardwareCycle() and waitForNextHardwareCycle() Enhancements Handles RS485 address of Control Hub automatically The Control Hub is automatically given a reserved address Existing configuration files will continue to work All addresses in the range of 1-10 are still available for Expansion Hubs The Control Hub light will now normally be solid green, without blinking to indicate the address The Control Hub will not be shown on the Expansion Hub Address Change settings page Improves REV Hub firmware updater The user can now choose between all available firmware update files Version 1.8.2 of the REV Hub firmware is bundled into the Robot Controller app. Text was added to clarify that Expansion Hubs can only be updated via USB. Firmware update speed was reduced to improve reliability Allows REV Hub firmware to be updated directly from the Manage webpage Improves log viewer on Robot Controller Horizontal scrolling support (no longer word wrapped) Supports pinch-to-zoom Uses a monospaced font Error messages are highlighted New color scheme Attempts to force-stop a runaway/stuck OpMode without restarting the entire app Not all types of runaway conditions are stoppable, but if the user code attempts to talk to hardware during the runaway, the system should be able to capture it. Makes various tweaks to the Self Inspect screen Renames "OS version" entry to "Android version" Renames "WiFi Direct Name" to "WiFi Name" Adds Control Hub OS version, when viewing the report of a Control Hub Hides the airplane mode entry, when viewing the report of a Control Hub Removes check for ZTE Speed Channel Changer Shows firmware version for all Expansion and Control Hubs Reworks network settings portion of Manage page All network settings are now applied with a single click The WiFi Direct channel of phone-based Robot Controllers can now be changed from the Manage page WiFi channels are filtered by band (2.4 vs 5 GHz) and whether they overlap with other channels The current WiFi channel is pre-selected on phone-based Robot Controllers, and Control Hubs running OS 1.1.2 or later. On Control Hubs running OS 1.1.2 or later, you can choose to have the system automatically select a channel on the 5 GHz band Improves OnBotJava New light and dark themes replace the old themes (chaos, github, chrome,...) the new default theme is light and will be used when you first update to this version OnBotJava now has a tabbed editor Read-only offline mode Improves function of "exit" menu item on Robot Controller and Driver Station Now guaranteed to be fully stopped and unloaded from memory Shows a warning message if a LinearOpMode exists prematurely due to failure to monitor for the start condition Improves error message shown when the Driver Station and Robot Controller are incompatible with each other Driver Station OpMode Control Panel now disabled while a Restart Robot is in progress Disables advanced settings related to WiFi direct when the Robot Controller is a Control Hub. Tint phone battery icons on Driver Station when low/critical. Uses names "Control Hub Portal" and "Control Hub" (when appropriate) in new configuration files Improve I2C read performance Very large improvement on Control Hub; up to ~2x faster with small (e.g. 6 byte) reads Not as apparent on Expansion Hubs connected to a phone Update/refresh build infrastructure Update to 'androidx' support library from 'com.android.support:appcompat', which is end-of-life Update targetSdkVersion and compileSdkVersion to 28 Update Android Studio's Android plugin to latest Fix reported build timestamp in 'About' screen Add sample illustrating manual webcam use: ConceptWebcam Bug fixes Fixes SkyStone issue #248 Fixes SkyStone issue #232 and modifies bulk caching semantics to allow for cache-preserving MANUAL/AUTO transitions. Improves performance when REV 2M distance sensor is unplugged Improves readability of Toast messages on certain devices Allows a Driver Station to connect to a Robot Controller after another has disconnected Improves generation of fake serial numbers for UVC cameras which do not provide a real serial number Previously some devices would assign such cameras a serial of 0:0 and fail to open and start streaming Fixes ftc_app issue #638. Fixes a slew of bugs with the Vuforia camera monitor including: Fixes bug where preview could be displayed with a wonky aspect ratio Fixes bug where preview could be cut off in landscape Fixes bug where preview got totally messed up when rotating phone Fixes bug where crosshair could drift off target when using webcams Fixes issue in UVC driver on some devices (ftc_app 681) if streaming was started/stopped multiple times in a row Issue manifested as kernel panic on devices which do not have this kernel patch. On affected devices which do have the patch, the issue was manifest as simply a failure to start streaming. The Tech Team believes that the root cause of the issue is a bug in the Linux kernel XHCI driver. A workaround was implemented in the SDK UVC driver. Fixes bug in UVC driver where often half the frames from the camera would be dropped (e.g. only 15FPS delivered during a streaming session configured for 30FPS). Fixes issue where TensorFlow Object Detection would show results whose confidence was lower than the minimum confidence parameter. Fixes a potential exploitation issue of CVE-2019-11358 in OnBotJava Fixes changing the address of an Expansion Hub with additional Expansion Hubs connected to it Preserves the Control Hub's network connection when "Restart Robot" is selected Fixes issue where device scans would fail while the Robot was restarting Fix RenderScript usage Use androidx.renderscript variant: increased compatibility Use RenderScript in Java mode, not native: simplifies build Fixes webcam-frame-to-bitmap conversion problem: alpha channel wasn't being initialized, only R, G, & B Fixes possible arithmetic overflow in Deadline Fixes deadlock in Vuforia webcam support which could cause 5-second delays when stopping OpMode Version 5.4 (20200108-101156) Fixes SkyStone issue #88 Adds an inspection item that notes when a robot controller (Control Hub) is using the factory default password. Fixes SkyStone issue #61 Fixes SkyStone issue #142 Fixes ftc_app issue #417 by adding more current and voltage monitoring capabilities for REV Hubs. Fixes a crash sometimes caused by OnBotJava activity Improves OnBotJava autosave functionality ftc_app #738 Fixes system responsiveness issue when an Expansion Hub is disconnected Fixes issue where IMU initialization could prevent Op Modes from stopping Fixes issue where AndroidTextToSpeech.speak() would fail if it was called too early Adds telemetry.speak() methods and blocks, which cause the Driver Station (if also updated) to speak text Adds and improves Expansion Hub-related warnings Improves Expansion Hub low battery warning Displays the warning immediately after the hub reports it Specifies whether the condition is current or occurred temporarily during an OpMode run Displays which hubs reported low battery Displays warning when hub loses and regains power during an OpMode run Fixes the hub's LED pattern after this condition Displays warning when Expansion Hub is not responding to commands Specifies whether the condition is current or occurred temporarily during an OpMode run Clarifies warning when Expansion Hub is not present at startup Specifies that this condition requires a Robot Restart before the hub can be used. The hub light will now accurately reflect this state Improves logging and reduces log spam during these conditions Syncs the Control Hub time and timezone to a connected web browser programming the robot, if a Driver Station is not available. Adds bulk read functionality for REV Hubs A bulk caching mode must be set at the Hub level with LynxModule#setBulkCachingMode(). This applies to all relevant SDK hardware classes that reference that Hub. The following following Hub bulk caching modes are available: BulkCachingMode.OFF (default): All hardware calls operate as usual. Bulk data can read through LynxModule#getBulkData() and processed manually. BulkCachingMode.AUTO: Applicable hardware calls are served from a bulk read cache that is cleared/refreshed automatically to ensure identical commands don't hit the same cache. The cache can also be cleared manually with LynxModule#clearBulkCache(), although this is not recommended. (advanced users) BulkCachingMode.MANUAL: Same as BulkCachingMode.AUTO except the cache is never cleared automatically. To avoid getting stale data, the cache must be manually cleared at the beginning of each loop body or as the user deems appropriate. Removes PIDF Annotation values added in Rev 5.3 (to AndyMark, goBILDA and TETRIX motor configurations). The new motor types will still be available but their Default control behavior will revert back to Rev 5.2 Adds new ConceptMotorBulkRead sample Opmode to demonstrate and compare Motor Bulk-Read modes for reducing I/O latencies. Version 5.3 (20191004-112306) Fixes external USB/UVC webcam support Makes various bugfixes and improvements to Blocks page, including but not limited to: Many visual tweaks Browser zoom and window resize behave better Resizing the Java preview pane works better and more consistently across browsers The Java preview pane consistently gets scrollbars when needed The Java preview pane is hidden by default on phones Internet Explorer 11 should work Large dropdown lists display properly on lower res screens Disabled buttons are now visually identifiable as disabled A warning is shown if a user selects a TFOD sample, but their device is not compatible Warning messages in a Blocks op mode are now visible by default. Adds goBILDA 5201 and 5202 motors to Robot Configurator Adds PIDF Annotation values to AndyMark, goBILDA and TETRIX motor configurations. This has the effect of causing the RUN_USING_ENCODERS and RUN_TO_POSITION modes to use PIDF vs PID closed loop control on these motors. This should provide more responsive, yet stable, speed control. PIDF adds Feedforward control to the basic PID control loop. Feedforward is useful when controlling a motor's speed because it "anticipates" how much the control voltage must change to achieve a new speed set-point, rather than requiring the integrated error to change sufficiently. The PIDF values were chosen to provide responsive, yet stable, speed control on a lightly loaded motor. The more heavily a motor is loaded (drag or friction), the more noticable the PIDF improvement will be. Fixes startup crash on Android 10 Fixes ftc_app issue #712 (thanks to FROGbots-4634) Fixes ftc_app issue #542 Allows "A" and lowercase letters when naming device through RC and DS apps. Version 5.2 (20190905-083277) Fixes extra-wide margins on settings activities, and placement of the new configuration button Adds Skystone Vuforia image target data. Includes sample Skystone Vuforia Navigation op modes (Java). Includes sample Skystone Vuforia Navigation op modes (Blocks). Adds TensorFlow inference model (.tflite) for Skystone game elements. Includes sample Skystone TensorFlow op modes (Java). Includes sample Skystone TensorFlow op modes (Blocks). Removes older (season-specific) sample op modes. Includes 64-bit support (to comply with Google Play requirements). Protects against Stuck OpModes when a Restart Robot is requested. (Thanks to FROGbots-4634) (ftc_app issue #709) Blocks related changes: Fixes bug with blocks generated code when hardware device name is a java or javascript reserved word. Shows generated java code for blocks, even when hardware items are missing from the active configuration. Displays warning icon when outdated Vuforia and TensorFlow blocks are used (SkyStone issue #27) Version 5.1 (20190820-222104) Defines default PIDF parameters for the following motors: REV Core Hex Motor REV 20:1 HD Hex Motor REV 40:1 HD Hex Motor Adds back button when running on a device without a system back button (such as a Control Hub) Allows a REV Control Hub to update the firmware on a REV Expansion Hub via USB Fixes SkyStone issue #9 Fixes ftc_app issue #715 Prevents extra DS User clicks by filtering based on current state. Prevents incorrect DS UI state changes when receiving new OpMode list from RC Adds support for REV Color Sensor V3 Adds a manual-refresh DS Camera Stream for remotely viewing RC camera frames. To show the stream on the DS, initialize but do not run a stream-enabled opmode, select the Camera Stream option in the DS menu, and tap the image to refresh. This feature is automatically enabled when using Vuforia or TFOD—no additional RC configuration is required for typical use cases. To hide the stream, select the same menu item again. Note that gamepads are disabled and the selected opmode cannot be started while the stream is open as a safety precaution. To use custom streams, consult the API docs for CameraStreamServer#setSource and CameraStreamSource. Adds many Star Wars sounds to RobotController resources. Added SKYSTONE Sounds Chooser Sample Program. Switches out startup, connect chimes, and error/warning sounds for Star Wars sounds Updates OnBot Java to use a WebSocket for communication with the robot The OnBot Java page no longer has to do a full refresh when a user switches from editing one file to another Known issues: Camera Stream The Vuforia camera stream inherits the issues present in the phone preview (namely ftc_app issue #574). This problem does not affect the TFOD camera stream even though it receives frames from Vuforia. The orientation of the stream frames may not always match the phone preview. For now, these frames may be rotated manually via a custom CameraStreamSource if desired. OnBotJava Browser back button may not always work correctly It's possible for a build to be queued, but not started. The OnBot Java build console will display a warning if this occurs. A user might not realize they are editing a different file if the user inadvertently switches from one file to another since this switch is now seamless. The name of the currently open file is displayed in the browser tab. Version 5.0 (built on 19.06.14) Support for the REV Robotics Control Hub. Adds a Java preview pane to the Blocks editor. Adds a new offline export feature to the Blocks editor. Display wifi channel in Network circle on Driver Station. Adds calibration for Logitech C270 Updates build tooling and target SDK. Compliance with Google's permissions infrastructure (Required after build tooling update). Keep Alives to mitigate the Motorola wifi scanning problem. Telemetry substitute no longer necessary. Improves Vuforia error reporting. Fixes ftctechnh/ftc_app issues 621, 713. Miscellaneous bug fixes and improvements. Version 4.3 (built on 18.10.31) Includes missing TensorFlow-related libraries and files. Version 4.2 (built on 18.10.30) Includes fix to avoid deadlock situation with WatchdogMonitor which could result in USB communication errors. Comm error appeared to require that user disconnect USB cable and restart the Robot Controller app to recover. robotControllerLog.txt would have error messages that included the words "E RobotCore: lynx xmit lock: #### abandoning lock:" Includes fix to correctly list the parent module address for a REV Robotics Expansion Hub in a configuration (.xml) file. Bug in versions 4.0 and 4.1 would incorrect list the address module for a parent REV Robotics device as "1". If the parent module had a higher address value than the daisy-chained module, then this bug would prevent the Robot Controller from communicating with the downstream Expansion Hub. Added requirement for ACCESS_COARSE_LOCATION to allow a Driver Station running Android Oreo to scan for Wi-Fi Direct devices. Added google() repo to build.gradle because aapt2 must be downloaded from the google() repository beginning with version 3.2 of the Android Gradle Plugin. Important Note: Android Studio users will need to be connected to the Internet the first time build the ftc_app project. Internet connectivity is required for the first build so the appropriate files can be downloaded from the Google repository. Users should not need to be connected to the Internet for subsequent builds. This should also fix buid issue where Android Studio would complain that it "Could not find com.android.tools.lint:lint-gradle:26.1.4" (or similar). Added support for REV Spark Mini motor controller as part of the configuration menu for a servo/PWM port on the REV Expansion Hub. Provide examples for playing audio files in an Op Mode. Block Development Tool Changes Includes a fix for a problem with the Velocity blocks that were reported in the FTC Technology forum (Blocks Programming subforum). Change the "Save completed successfully." message to a white color so it will contrast with a green background. Fixed the "Download image" feature so it will work if there are text blocks in the op mode. Introduce support for Google's TensorFlow Lite technology for object detetion for 2018-2019 game. TensorFlow lite can recognize Gold Mineral and Silver Mineral from 2018-2019 game. Example Java and Block op modes are included to show how to determine the relative position of the gold block (left, center, right). Version 4.1 (released on 18.09.24) Changes include: Fix to prevent crash when deprecated configuration annotations are used. Change to allow FTC Robot Controller APK to be auto-updated using FIRST Global Control Hub update scripts. Removed samples for non supported / non legal hardware. Improvements to Telemetry.addData block with "text" socket. Updated Blocks sample op mode list to include Rover Ruckus Vuforia example. Update SDK library version number. Version 4.0 (released on 18.09.12) Changes include: Initial support for UVC compatible cameras If UVC camera has a unique serial number, RC will detect and enumerate by serial number. If UVC camera lacks a unique serial number, RC will only support one camera of that type connected. Calibration settings for a few cameras are included (see TeamCode/src/main/res/xml/teamwebcamcalibrations.xml for details). User can upload calibration files from Program and Manage web interface. UVC cameras seem to draw a fair amount of electrical current from the USB bus. This does not appear to present any problems for the REV Robotics Control Hub. This does seem to create stability problems when using some cameras with an Android phone-based Robot Controller. FTC Tech Team is investigating options to mitigate this issue with the phone-based Robot Controllers. Updated sample Vuforia Navigation and VuMark Op Modes to demonstrate how to use an internal phone-based camera and an external UVC webcam. Support for improved motor control. REV Robotics Expansion Hub firmware 1.8 and greater will support a feed forward mechanism for closed loop motor control. FTC SDK has been modified to support PIDF coefficients (proportional, integral, derivative, and feed forward). FTC Blocks development tool modified to include PIDF programming blocks. Deprecated older PID-related methods and variables. REV's 1.8.x PIDF-related changes provide a more linear and accurate way to control a motor. Wireless Added 5GHz support for wireless channel changing for those devices that support it. Tested with Moto G5 and E4 phones. Also tested with other (currently non-approved) phones such as Samsung Galaxy S8. Improved Expansion Hub firmware update support in Robot Controller app Changes to make the system more robust during the firmware update process (when performed through Robot Controller app). User no longer has to disconnect a downstream daisy-chained Expansion Hub when updating an Expansion Hub's firmware. If user is updating an Expansion Hub's firmware through a USB connection, he/she does not have to disconnect RS485 connection to other Expansion Hubs. The user still must use a USB connection to update an Expansion Hub's firmware. The user cannot update the Expansion Hub firmware for a downstream device that is daisy chained through an RS485 connection. If an Expansion Hub accidentally gets "bricked" the Robot Controller app is now more likely to recognize the Hub when it scans the USB bus. Robot Controller app should be able to detect an Expansion Hub, even if it accidentally was bricked in a previous update attempt. Robot Controller app should be able to install the firmware onto the Hub, even if if accidentally was bricked in a previous update attempt. Resiliency FTC software can detect and enable an FTDI reset feature that is available with REV Robotics v1.8 Expansion Hub firmware and greater. When enabled, the Expansion Hub can detect if it hasn't communicated with the Robot Controller over the FTDI (USB) connection. If the Hub hasn't heard from the Robot Controller in a while, it will reset the FTDI connection. This action helps system recover from some ESD-induced disruptions. Various fixes to improve reliability of FTC software. Blocks Fixed errors with string and list indices in blocks export to java. Support for USB connected UVC webcams. Refactored optimized Blocks Vuforia code to support Rover Ruckus image targets. Added programming blocks to support PIDF (proportional, integral, derivative and feed forward) motor control. Added formatting options (under Telemetry and Miscellaneous categories) so user can set how many decimal places to display a numerical value. Support to play audio files (which are uploaded through Blocks web interface) on Driver Station in addition to the Robot Controller. Fixed bug with Download Image of Blocks feature. Support for REV Robotics Blinkin LED Controller. Support for REV Robotics 2m Distance Sensor. Added support for a REV Touch Sensor (no longer have to configure as a generic digital device). Added blocks for DcMotorEx methods. These are enhanced methods that you can use when supported by the motor controller hardware. The REV Robotics Expansion Hub supports these enhanced methods. Enhanced methods include methods to get/set motor velocity (in encoder pulses per second), get/set PIDF coefficients, etc.. Modest Improvements in Logging Decrease frequency of battery checker voltage statements. Removed non-FTC related log statements (wherever possible). Introduced a "Match Logging" feature. Under "Settings" a user can enable/disable this feature (it's disabled by default). If enabled, user provides a "Match Number" through the Driver Station user interface (top of the screen). The Match Number is used to create a log file specifically with log statements from that particular Op Mode run. Match log files are stored in /sdcard/FIRST/matlogs on the Robot Controller. Once an op mode run is complete, the Match Number is cleared. This is a convenient way to create a separate match log with statements only related to a specific op mode run. New Devices Support for REV Robotics Blinkin LED Controller. Support for REV Robotics 2m Distance Sensor. Added configuration option for REV 20:1 HD Hex Motor. Added support for a REV Touch Sensor (no longer have to configure as a generic digital device). Miscellaneous Fixed some errors in the definitions for acceleration and velocity in our javadoc documentation. Added ability to play audio files on Driver Station When user is configuring an Expansion Hub, the LED on the Expansion Hub will change blink pattern (purple-cyan) to indicate which Hub is currently being configured. Renamed I2cSensorType to I2cDeviceType. Added an external sample Op Mode that demonstrates localization using 2018-2019 (Rover Ruckus presented by QualComm) Vuforia targets. Added an external sample Op Mode that demonstrates how to use the REV Robotics 2m Laser Distance Sensor. Added an external sample Op Mode that demonstrates how to use the REV Robotics Blinkin LED Controller. Re-categorized external Java sample Op Modes to "TeleOp" instead of "Autonomous". Known issues: Initial support for UVC compatible cameras UVC cameras seem to draw significant amount of current from the USB bus. This does not appear to present any problems for the REV Robotics Control Hub. This does seem to create stability problems when using some cameras with an Android phone-based Robot Controller. FTC Tech Team is investigating options to mitigate this issue with the phone-based Robot Controllers. There might be a possible deadlock which causes the RC to become unresponsive when using a UVC webcam with a Nougat Android Robot Controller. Wireless When user selects a wireless channel, this channel does not necessarily persist if the phone is power cycled. Tech Team is hoping to eventually address this issue in a future release. Issue has been present since apps were introduced (i.e., it is not new with the v4.0 release). Wireless channel is not currently displayed for WiFi Direct connections. Miscellaneous The blink indication feature that shows which Expansion Hub is currently being configured does not work for a newly created configuration file. User has to first save a newly created configuration file and then close and re-edit the file in order for blink indicator to work. Version 3.6 (built on 17.12.18) Changes include: Blocks Changes Uses updated Google Blockly software to allow users to edit their op modes on Apple iOS devices (including iPad and iPhone). Improvement in Blocks tool to handle corrupt op mode files. Autonomous op modes should no longer get switched back to tele-op after re-opening them to be edited. The system can now detect type mismatches during runtime and alert the user with a message on the Driver Station. Updated javadoc documentation for setPower() method to reflect correct range of values (-1 to +1). Modified VuforiaLocalizerImpl to allow for user rendering of frames Added a user-overrideable onRenderFrame() method which gets called by the class's renderFrame() method. Version 3.5 (built on 17.10.30) Changes with version 3.5 include: Introduced a fix to prevent random op mode stops, which can occur after the Robot Controller app has been paused and then resumed (for example, when a user temporarily turns off the display of the Robot Controller phone, and then turns the screen back on). Introduced a fix to prevent random op mode stops, which were previously caused by random peer disconnect events on the Driver Station. Fixes issue where log files would be closed on pause of the RC or DS, but not re-opened upon resume. Fixes issue with battery handler (voltage) start/stop race. Fixes issue where Android Studio generated op modes would disappear from available list in certain situations. Fixes problem where OnBot Java would not build on REV Robotics Control Hub. Fixes problem where OnBot Java would not build if the date and time on the Robot Controller device was "rewound" (set to an earlier date/time). Improved error message on OnBot Java that occurs when renaming a file fails. Removed unneeded resources from android.jar binaries used by OnBot Java to reduce final size of Robot Controller app. Added MR_ANALOG_TOUCH_SENSOR block to Blocks Programming Tool. Version 3.4 (built on 17.09.06) Changes with version 3.4 include: Added telemetry.update() statement for BlankLinearOpMode template. Renamed sample Block op modes to be more consistent with Java samples. Added some additional sample Block op modes. Reworded OnBot Java readme slightly. Version 3.3 (built on 17.09.04) This version of the software includes improves for the FTC Blocks Programming Tool and the OnBot Java Programming Tool. Changes with verion 3.3 include: Android Studio ftc_app project has been updated to use Gradle Plugin 2.3.3. Android Studio ftc_app project is already using gradle 3.5 distribution. Robot Controller log has been renamed to /sdcard/RobotControllerLog.txt (note that this change was actually introduced w/ v3.2). Improvements in I2C reliability. Optimized I2C read for REV Expansion Hub, with v1.7 firmware or greater. Updated all external/samples (available through OnBot and in Android project folder). Vuforia Added support for VuMarks that will be used for the 2017-2018 season game. Blocks Update to latest Google Blockly release. Sample op modes can be selected as a template when creating new op mode. Fixed bug where the blocks would disappear temporarily when mouse button is held down. Added blocks for Range.clip and Range.scale. User can now disable/enable Block op modes. Fix to prevent occasional Blocks deadlock. OnBot Java Significant improvements with autocomplete function for OnBot Java editor. Sample op modes can be selected as a template when creating new op mode. Fixes and changes to complete hardware setup feature. Updated (and more useful) onBot welcome message. Known issues: Android Studio After updating to the new v3.3 Android Studio project folder, if you get error messages indicating "InvalidVirtualFileAccessException" then you might need to do a File->Invalidate Caches / Restart to clear the error. OnBot Java Sometimes when you push the build button to build all op modes, the RC returns an error message that the build failed. If you press the build button a second time, the build typically suceeds. Version 3.2 (built on 17.08.02) This version of the software introduces the "OnBot Java" Development Tool. Similar to the FTC Blocks Development Tool, the FTC OnBot Java Development Tool allows a user to create, edit and build op modes dynamically using only a Javascript-enabled web browser. The OnBot Java Development Tool is an integrated development environment (IDE) that is served up by the Robot Controller. Op modes are created and edited using a Javascript-enabled browser (Google Chromse is recommended). Op modes are saved on the Robot Controller Android device directly. The OnBot Java Development Tool provides a Java programming environment that does NOT need Android Studio. Changes with version 3.2 include: Enhanced web-based development tools Introduction of OnBot Java Development Tool. Web-based programming and management features are "always on" (user no longer needs to put Robot Controller into programming mode). Web-based management interface (where user can change Robot Controller name and also easily download Robot Controller log file). OnBot Java, Blocks and Management features available from web based interface. Blocks Programming Development Tool: Changed "LynxI2cColorRangeSensor" block to "REV Color/range sensor" block. Fixed tooltip for ColorSensor.isLightOn block. Added blocks for ColorSensor.getNormalizedColors and LynxI2cColorRangeSensor.getNormalizedColors. Added example op modes for digital touch sensor and REV Robotics Color Distance sensor. User selectable color themes. Includes many minor enhancements and fixes (too numerous to list). Known issues: Auto complete function is incomplete and does not support the following (for now): Access via this keyword Access via super keyword Members of the super cloass, not overridden by the class Any methods provided in the current class Inner classes Can't handle casted objects Any objects coming from an parenthetically enclosed expression Version 3.10 (built on 17.05.09) This version of the software provides support for the REV Robotics Expansion Hub. This version also includes improvements in the USB communication layer in an effort to enhance system resiliency. If you were using a 2.x version of the software previously, updating to version 3.1 requires that you also update your Driver Station software in addition to updating the Robot Controller software. Also note that in version 3.10 software, the setMaxSpeed and getMaxSpeed methods are no longer available (not deprecated, they have been removed from the SDK). Also note that the the new 3.x software incorporates motor profiles that a user can select as he/she configures the robot. Changes include: Blocks changes Added VuforiaTrackableDefaultListener.getPose and Vuforia.trackPose blocks. Added optimized blocks support for Vuforia extended tracking. Added atan2 block to the math category. Added useCompetitionFieldTargetLocations parameter to Vuforia.initialize block. If set to false, the target locations are placed at (0,0,0) with target orientation as specified in https://github.com/gearsincorg/FTCVuforiaDemo/blob/master/Robot_Navigation.java tutorial op mode. Incorporates additional improvements to USB comm layer to improve system resiliency (to recover from a greater number of communication disruptions). Additional Notes Regarding Version 3.00 (built on 17.04.13) In addition to the release changes listed below (see section labeled "Version 3.00 (built on 17.04.013)"), version 3.00 has the following important changes: Version 3.00 software uses a new version of the FTC Robocol (robot protocol). If you upgrade to v3.0 on the Robot Controller and/or Android Studio side, you must also upgrade the Driver Station software to match the new Robocol. Version 3.00 software removes the setMaxSpeed and getMaxSpeed methods from the DcMotor class. If you have an op mode that formerly used these methods, you will need to remove the references/calls to these methods. Instead, v3.0 provides the max speed information through the use of motor profiles that are selected by the user during robot configuration. Version 3.00 software currently does not have a mechanism to disable extra i2c sensors. We hope to re-introduce this function with a release in the near future. Version 3.00 (built on 17.04.13) *** Use this version of the software at YOUR OWN RISK!!! *** This software is being released as an "alpha" version. Use this version at your own risk! This pre-release software contains SIGNIFICANT changes, including changes to the Wi-Fi Direct pairing mechanism, rewrites of the I2C sensor classes, changes to the USB/FTDI layer, and the introduction of support for the REV Robotics Expansion Hub and the REV Robotics color-range-light sensor. These changes were implemented to improve the reliability and resiliency of the FTC control system. Please note, however, that version 3.00 is considered "alpha" code. This code is being released so that the FIRST community will have an opportunity to test the new REV Expansion Hub electronics module when it becomes available in May. The developers do not recommend using this code for critical applications (i.e., competition use). *** Use this version of the software at YOUR OWN RISK!!! *** Changes include: Major rework of sensor-related infrastructure. Includes rewriting sensor classes to implement synchronous I2C communication. Fix to reset Autonomous timer back to 30 seconds. Implementation of specific motor profiles for approved 12V motors (includes Tetrix, AndyMark, Matrix and REV models). Modest improvements to enhance Wi-Fi P2P pairing. Fixes telemetry log addition race. Publishes all the sources (not just a select few). Includes Block programming improvements Addition of optimized Vuforia blocks. Auto scrollbar to projects and sounds pages. Fixed blocks paste bug. Blocks execute after while-opModeIsActive loop (to allow for cleanup before exiting op mode). Added gyro integratedZValue block. Fixes bug with projects page for Firefox browser. Added IsSpeaking block to AndroidTextToSpeech. Implements support for the REV Robotics Expansion Hub Implements support for integral REV IMU (physically installed on I2C bus 0, uses same Bosch BNO055 9 axis absolute orientation sensor as Adafruit 9DOF abs orientation sensor). - Implements support for REV color/range/light sensor. Provides support to update Expansion Hub firmware through FTC SDK. Detects REV firmware version and records in log file. Includes support for REV Control Hub (note that the REV Control Hub is not yet approved for FTC use). Implements FTC Blocks programming support for REV Expansion Hub and sensor hardware. Detects and alerts when I2C device disconnect. Version 2.62 (built on 17.01.07) Added null pointer check before calling modeToByte() in finishModeSwitchIfNecessary method for ModernRoboticsUsbDcMotorController class. Changes to enhance Modern Robotics USB protocol robustness. Version 2.61 (released on 16.12.19) Blocks Programming mode changes: Fix to correct issue when an exception was thrown because an OpticalDistanceSensor object appears twice in the hardware map (the second time as a LightSensor). Version 2.6 (released on 16.12.16) Fixes for Gyro class: Improve (decrease) sensor refresh latency. fix isCalibrating issues. Blocks Programming mode changes: Blocks now ignores a device in the configuration xml if the name is empty. Other devices work in configuration work fine. Version 2.5 (internal release on released on 16.12.13) Blocks Programming mode changes: Added blocks support for AdafruitBNO055IMU. Added Download Op Mode button to FtcBocks.html. Added support for copying blocks in one OpMode and pasting them in an other OpMode. The clipboard content is stored on the phone, so the programming mode server must be running. Modified Utilities section of the toolbox. In Programming Mode, display information about the active connections. Fixed paste location when workspace has been scrolled. Added blocks support for the android Accelerometer. Fixed issue where Blocks Upload Op Mode truncated name at first dot. Added blocks support for Android SoundPool. Added type safety to blocks for Acceleration. Added type safety to blocks for AdafruitBNO055IMU.Parameters. Added type safety to blocks for AnalogInput. Added type safety to blocks for AngularVelocity. Added type safety to blocks for Color. Added type safety to blocks for ColorSensor. Added type safety to blocks for CompassSensor. Added type safety to blocks for CRServo. Added type safety to blocks for DigitalChannel. Added type safety to blocks for ElapsedTime. Added type safety to blocks for Gamepad. Added type safety to blocks for GyroSensor. Added type safety to blocks for IrSeekerSensor. Added type safety to blocks for LED. Added type safety to blocks for LightSensor. Added type safety to blocks for LinearOpMode. Added type safety to blocks for MagneticFlux. Added type safety to blocks for MatrixF. Added type safety to blocks for MrI2cCompassSensor. Added type safety to blocks for MrI2cRangeSensor. Added type safety to blocks for OpticalDistanceSensor. Added type safety to blocks for Orientation. Added type safety to blocks for Position. Added type safety to blocks for Quaternion. Added type safety to blocks for Servo. Added type safety to blocks for ServoController. Added type safety to blocks for Telemetry. Added type safety to blocks for Temperature. Added type safety to blocks for TouchSensor. Added type safety to blocks for UltrasonicSensor. Added type safety to blocks for VectorF. Added type safety to blocks for Velocity. Added type safety to blocks for VoltageSensor. Added type safety to blocks for VuforiaLocalizer.Parameters. Added type safety to blocks for VuforiaTrackable. Added type safety to blocks for VuforiaTrackables. Added type safety to blocks for enums in AdafruitBNO055IMU.Parameters. Added type safety to blocks for AndroidAccelerometer, AndroidGyroscope, AndroidOrientation, and AndroidTextToSpeech. Version 2.4 (released on 16.11.13) Fix to avoid crashing for nonexistent resources. Blocks Programming mode changes: Added blocks to support OpenGLMatrix, MatrixF, and VectorF. Added blocks to support AngleUnit, AxesOrder, AxesReference, CameraDirection, CameraMonitorFeedback, DistanceUnit, and TempUnit. Added blocks to support Acceleration. Added blocks to support LinearOpMode.getRuntime. Added blocks to support MagneticFlux and Position. Fixed typos. Made blocks for ElapsedTime more consistent with other objects. Added blocks to support Quaternion, Velocity, Orientation, AngularVelocity. Added blocks to support VuforiaTrackables, VuforiaTrackable, VuforiaLocalizer, VuforiaTrackableDefaultListener. Fixed a few blocks. Added type checking to new blocks. Updated to latest blockly. Added default variable blocks to navigation and matrix blocks. Fixed toolbox entry for openGLMatrix_rotation_withAxesArgs. When user downloads Blocks-generated op mode, only the .blk file is downloaded. When user uploads Blocks-generated op mode (.blk file), Javascript code is auto generated. Added DbgLog support. Added logging when a blocks file is read/written. Fixed bug to properly render blocks even if missing devices from configuration file. Added support for additional characters (not just alphanumeric) for the block file names (for download and upload). Added support for OpMode flavor (“Autonomous” or “TeleOp”) and group. Changes to Samples to prevent tutorial issues. Incorporated suggested changes from public pull 216 (“Replace .. paths”). Remove Servo Glitches when robot stopped. if user hits “Cancels” when editing a configuration file, clears the unsaved changes and reverts to original unmodified configuration. Added log info to help diagnose why the Robot Controller app was terminated (for example, by watch dog function). Added ability to transfer log from the controller. Fixed inconsistency for AngularVelocity Limit unbounded growth of data for telemetry. If user does not call telemetry.update() for LinearOpMode in a timely manner, data added for telemetry might get lost if size limit is exceeded. Version 2.35 (released on 16.10.06) Blockly programming mode - Removed unnecesary idle() call from blocks for new project. Version 2.30 (released on 16.10.05) Blockly programming mode: Mechanism added to save Blockly op modes from Programming Mode Server onto local device To avoid clutter, blocks are displayed in categorized folders Added support for DigitalChannel Added support for ModernRoboticsI2cCompassSensor Added support for ModernRoboticsI2cRangeSensor Added support for VoltageSensor Added support for AnalogInput Added support for AnalogOutput Fix for CompassSensor setMode block Vuforia Fix deadlock / make camera data available while Vuforia is running. Update to Vuforia 6.0.117 (recommended by Vuforia and Google to close security loophole). Fix for autonomous 30 second timer bug (where timer was in effect, even though it appeared to have timed out). opModeIsActive changes to allow cleanup after op mode is stopped (with enforced 2 second safety timeout). Fix to avoid reading i2c twice. Updated sample Op Modes. Improved logging and fixed intermittent freezing. Added digital I/O sample. Cleaned up device names in sample op modes to be consistent with Pushbot guide. Fix to allow use of IrSeekerSensorV3. Version 2.20 (released on 16.09.08) Support for Modern Robotics Compass Sensor. Support for Modern Robotics Range Sensor. Revise device names for Pushbot templates to match the names used in Pushbot guide. Fixed bug so that IrSeekerSensorV3 device is accessible as IrSeekerSensor in hardwareMap. Modified computer vision code to require an individual Vuforia license (per legal requirement from PTC). Minor fixes. Blockly enhancements: Support for Voltage Sensor. Support for Analog Input. Support for Analog Output. Support for Light Sensor. Support for Servo Controller. Version 2.10 (released on 16.09.03) Support for Adafruit IMU. Improvements to ModernRoboticsI2cGyro class Block on reset of z axis. isCalibrating() returns true while gyro is calibration. Updated sample gyro program. Blockly enhancements support for android.graphics.Color. added support for ElapsedTime. improved look and legibility of blocks. support for compass sensor. support for ultrasonic sensor. support for IrSeeker. support for LED. support for color sensor. support for CRServo prompt user to configure robot before using programming mode. Provides ability to disable audio cues. various bug fixes and improvements. Version 2.00 (released on 16.08.19) This is the new release for the upcoming 2016-2017 FIRST Tech Challenge Season. Channel change is enabled in the FTC Robot Controller app for Moto G 2nd and 3rd Gen phones. Users can now use annotations to register/disable their Op Modes. Changes in the Android SDK, JDK and build tool requirements (minsdk=19, java 1.7, build tools 23.0.3). Standardized units in analog input. Cleaned up code for existing analog sensor classes. setChannelMode and getChannelMode were REMOVED from the DcMotorController class. This is important - we no longer set the motor modes through the motor controller. setMode and getMode were added to the DcMotor class. ContinuousRotationServo class has been added to the FTC SDK. Range.clip() method has been overloaded so it can support this operation for int, short and byte integers. Some changes have been made (new methods added) on how a user can access items from the hardware map. Users can now set the zero power behavior for a DC motor so that the motor will brake or float when power is zero. Prototype Blockly Programming Mode has been added to FTC Robot Controller. Users can place the Robot Controller into this mode, and then use a device (such as a laptop) that has a Javascript enabled browser to write Blockly-based Op Modes directly onto the Robot Controller. Users can now configure the robot remotely through the FTC Driver Station app. Android Studio project supports Android Studio 2.1.x and compile SDK Version 23 (Marshmallow). Vuforia Computer Vision SDK integrated into FTC SDK. Users can use sample vision targets to get localization information on a standard FTC field. Project structure has been reorganized so that there is now a TeamCode package that users can use to place their local/custom Op Modes into this package. Inspection function has been integrated into the FTC Robot Controller and Driver Station Apps (Thanks Team HazMat… 9277 & 10650!). Audio cues have been incorporated into FTC SDK. Swap mechanism added to FTC Robot Controller configuration activity. For example, if you have two motor controllers on a robot, and you misidentified them in your configuration file, you can use the Swap button to swap the devices within the configuration file (so you do not have to manually re-enter in the configuration info for the two devices). Fix mechanism added to all user to replace an electronic module easily. For example, suppose a servo controller dies on your robot. You replace the broken module with a new module, which has a different serial number from the original servo controller. You can use the Fix button to automatically reconfigure your configuration file to use the serial number of the new module. Improvements made to fix resiliency and responsiveness of the system. For LinearOpMode the user now must for a telemetry.update() to update the telemetry data on the driver station. This update() mechanism ensures that the driver station gets the updated data properly and at the same time. The Auto Configure function of the Robot Controller is now template based. If there is a commonly used robot configuration, a template can be created so that the Auto Configure mechanism can be used to quickly configure a robot of this type. The logic to detect a runaway op mode (both in the LinearOpMode and OpMode types) and to abort the run, then auto recover has been improved/implemented. Fix has been incorporated so that Logitech F310 gamepad mappings will be correct for Marshmallow users. Release 16.07.08 For the ftc_app project, the gradle files have been modified to support Android Studio 2.1.x. Release 16.03.30 For the MIT App Inventor, the design blocks have new icons that better represent the function of each design component. Some changes were made to the shutdown logic to ensure the robust shutdown of some of our USB services. A change was made to LinearOpMode so as to allow a given instance to be executed more than once, which is required for the App Inventor. Javadoc improved/updated. Release 16.03.09 Changes made to make the FTC SDK synchronous (significant change!) waitOneFullHardwareCycle() and waitForNextHardwareCycle() are no longer needed and have been deprecated. runOpMode() (for a LinearOpMode) is now decoupled from the system's hardware read/write thread. loop() (for an OpMode) is now decoupled from the system's hardware read/write thread. Methods are synchronous. For example, if you call setMode(DcMotorController.RunMode.RESET_ENCODERS) for a motor, the encoder is guaranteed to be reset when the method call is complete. For legacy module (NXT compatible), user no longer has to toggle between read and write modes when reading from or writing to a legacy device. Changes made to enhance reliability/robustness during ESD event. Changes made to make code thread safe. Debug keystore added so that user-generated robot controller APKs will all use the same signed key (to avoid conflicts if a team has multiple developer laptops for example). Firmware version information for Modern Robotics modules are now logged. Changes made to improve USB comm reliability and robustness. Added support for voltage indicator for legacy (NXT-compatible) motor controllers. Changes made to provide auto stop capabilities for op modes. A LinearOpMode class will stop when the statements in runOpMode() are complete. User does not have to push the stop button on the driver station. If an op mode is stopped by the driver station, but there is a run away/uninterruptible thread persisting, the app will log an error message then force itself to crash to stop the runaway thread. Driver Station UI modified to display lowest measured voltage below current voltage (12V battery). Driver Station UI modified to have color background for current voltage (green=good, yellow=caution, red=danger, extremely low voltage). javadoc improved (edits and additional classes). Added app build time to About activity for driver station and robot controller apps. Display local IP addresses on Driver Station About activity. Added I2cDeviceSynchImpl. Added I2cDeviceSync interface. Added seconds() and milliseconds() to ElapsedTime for clarity. Added getCallbackCount() to I2cDevice. Added missing clearI2cPortActionFlag. Added code to create log messages while waiting for LinearOpMode shutdown. Fix so Wifi Direct Config activity will no longer launch multiple times. Added the ability to specify an alternate i2c address in software for the Modern Robotics gyro. Release 16.02.09 Improved battery checker feature so that voltage values get refreshed regularly (every 250 msec) on Driver Station (DS) user interface. Improved software so that Robot Controller (RC) is much more resilient and “self-healing” to USB disconnects: If user attempts to start/restart RC with one or more module missing, it will display a warning but still start up. When running an op mode, if one or more modules gets disconnected, the RC & DS will display warnings,and robot will keep on working in spite of the missing module(s). If a disconnected module gets physically reconnected the RC will auto detect the module and the user will regain control of the recently connected module. Warning messages are more helpful (identifies the type of module that’s missing plus its USB serial number). Code changes to fix the null gamepad reference when users try to reference the gamepads in the init() portion of their op mode. NXT light sensor output is now properly scaled. Note that teams might have to readjust their light threshold values in their op modes. On DS user interface, gamepad icon for a driver will disappear if the matching gamepad is disconnected or if that gamepad gets designated as a different driver. Robot Protocol (ROBOCOL) version number info is displayed in About screen on RC and DS apps. Incorporated a display filter on pairing screen to filter out devices that don’t use the “-“ format. This filter can be turned off to show all WiFi Direct devices. Updated text in License file. Fixed formatting error in OpticalDistanceSensor.toString(). Fixed issue on with a blank (“”) device name that would disrupt WiFi Direct Pairing. Made a change so that the WiFi info and battery info can be displayed more quickly on the DS upon connecting to RC. Improved javadoc generation. Modified code to make it easier to support language localization in the future. Release 16.01.04 Updated compileSdkVersion for apps Prevent Wifi from entering power saving mode removed unused import from driver station Corrrected "Dead zone" joystick code. LED.getDeviceName and .getConnectionInfo() return null apps check for ROBOCOL_VERSION mismatch Fix for Telemetry also has off-by-one errors in its data string sizing / short size limitations error User telemetry output is sorted. added formatting variants to DbgLog and RobotLog APIs code modified to allow for a long list of op mode names. changes to improve thread safety of RobocolDatagramSocket Fix for "missing hardware leaves robot controller disconnected from driver station" error fix for "fast tapping of Init/Start causes problems" (toast is now only instantiated on UI thread). added some log statements for thread life cycle. moved gamepad reset logic inside of initActiveOpMode() for robustness changes made to mitigate risk of race conditions on public methods. changes to try and flag when WiFi Direct name contains non-printable characters. fix to correct race condition between .run() and .close() in ReadWriteRunnableStandard. updated FTDI driver made ReadWriteRunnableStanard interface public. fixed off-by-one errors in Command constructor moved specific hardware implmentations into their own package. moved specific gamepad implemnatations to the hardware library. changed LICENSE file to new BSD version. fixed race condition when shutting down Modern Robotics USB devices. methods in the ColorSensor classes have been synchronized. corrected isBusy() status to reflect end of motion. corrected "back" button keycode. the notSupported() method of the GyroSensor class was changed to protected (it should not be public). Release 15.11.04.001 Added Support for Modern Robotics Gyro. The GyroSensor class now supports the MR Gyro Sensor. Users can access heading data (about Z axis) Users can also access raw gyro data (X, Y, & Z axes). Example MRGyroTest.java op mode included. Improved error messages More descriptive error messages for exceptions in user code. Updated DcMotor API Enable read mode on new address in setI2cAddress Fix so that driver station app resets the gamepads when switching op modes. USB-related code changes to make USB comm more responsive and to display more explicit error messages. Fix so that USB will recover properly if the USB bus returns garbage data. Fix USB initializtion race condition. Better error reporting during FTDI open. More explicit messages during USB failures. Fixed bug so that USB device is closed if event loop teardown method was not called. Fixed timer UI issue Fixed duplicate name UI bug (Legacy Module configuration). Fixed race condition in EventLoopManager. Fix to keep references stable when updating gamepad. For legacy Matrix motor/servo controllers removed necessity of appending "Motor" and "Servo" to controller names. Updated HT color sensor driver to use constants from ModernRoboticsUsbLegacyModule class. Updated MR color sensor driver to use constants from ModernRoboticsUsbDeviceInterfaceModule class. Correctly handle I2C Address change in all color sensors Updated/cleaned up op modes. Updated comments in LinearI2cAddressChange.java example op mode. Replaced the calls to "setChannelMode" with "setMode" (to match the new of the DcMotor method). Removed K9AutoTime.java op mode. Added MRGyroTest.java op mode (demonstrates how to use MR Gyro Sensor). Added MRRGBExample.java op mode (demonstrates how to use MR Color Sensor). Added HTRGBExample.java op mode (demonstrates how to use HT legacy color sensor). Added MatrixControllerDemo.java (demonstrates how to use legacy Matrix controller). Updated javadoc documentation. Updated release .apk files for Robot Controller and Driver Station apps. Release 15.10.06.002 Added support for Legacy Matrix 9.6V motor/servo controller. Cleaned up build.gradle file. Minor UI and bug fixes for driver station and robot controller apps. Throws error if Ultrasonic sensor (NXT) is not configured for legacy module port 4 or 5. Release 15.08.03.001 New user interfaces for FTC Driver Station and FTC Robot Controller apps. An init() method is added to the OpMode class. For this release, init() is triggered right before the start() method. Eventually, the init() method will be triggered when the user presses an "INIT" button on driver station. The init() and loop() methods are now required (i.e., need to be overridden in the user's op mode). The start() and stop() methods are optional. A new LinearOpMode class is introduced. Teams can use the LinearOpMode mode to create a linear (not event driven) program model. Teams can use blocking statements like Thread.sleep() within a linear op mode. The API for the Legacy Module and Core Device Interface Module have been updated. Support for encoders with the Legacy Module is now working. The hardware loop has been updated for better performance.
molyswu / Hand Detectionusing Neural Networks (SSD) on Tensorflow. This repo documents steps and scripts used to train a hand detector using Tensorflow (Object Detection API). As with any DNN based task, the most expensive (and riskiest) part of the process has to do with finding or creating the right (annotated) dataset. I was interested mainly in detecting hands on a table (egocentric view point). I experimented first with the [Oxford Hands Dataset](http://www.robots.ox.ac.uk/~vgg/data/hands/) (the results were not good). I then tried the [Egohands Dataset](http://vision.soic.indiana.edu/projects/egohands/) which was a much better fit to my requirements. The goal of this repo/post is to demonstrate how neural networks can be applied to the (hard) problem of tracking hands (egocentric and other views). Better still, provide code that can be adapted to other uses cases. If you use this tutorial or models in your research or project, please cite [this](#citing-this-tutorial). Here is the detector in action. <img src="images/hand1.gif" width="33.3%"><img src="images/hand2.gif" width="33.3%"><img src="images/hand3.gif" width="33.3%"> Realtime detection on video stream from a webcam . <img src="images/chess1.gif" width="33.3%"><img src="images/chess2.gif" width="33.3%"><img src="images/chess3.gif" width="33.3%"> Detection on a Youtube video. Both examples above were run on a macbook pro **CPU** (i7, 2.5GHz, 16GB). Some fps numbers are: | FPS | Image Size | Device| Comments| | ------------- | ------------- | ------------- | ------------- | | 21 | 320 * 240 | Macbook pro (i7, 2.5GHz, 16GB) | Run without visualizing results| | 16 | 320 * 240 | Macbook pro (i7, 2.5GHz, 16GB) | Run while visualizing results (image above) | | 11 | 640 * 480 | Macbook pro (i7, 2.5GHz, 16GB) | Run while visualizing results (image above) | > Note: The code in this repo is written and tested with Tensorflow `1.4.0-rc0`. Using a different version may result in [some errors](https://github.com/tensorflow/models/issues/1581). You may need to [generate your own frozen model](https://pythonprogramming.net/testing-custom-object-detector-tensorflow-object-detection-api-tutorial/?completed=/training-custom-objects-tensorflow-object-detection-api-tutorial/) graph using the [model checkpoints](model-checkpoint) in the repo to fit your TF version. **Content of this document** - Motivation - Why Track/Detect hands with Neural Networks - Data preparation and network training in Tensorflow (Dataset, Import, Training) - Training the hand detection Model - Using the Detector to Detect/Track hands - Thoughts on Optimizations. > P.S if you are using or have used the models provided here, feel free to reach out on twitter ([@vykthur](https://twitter.com/vykthur)) and share your work! ## Motivation - Why Track/Detect hands with Neural Networks? There are several existing approaches to tracking hands in the computer vision domain. Incidentally, many of these approaches are rule based (e.g extracting background based on texture and boundary features, distinguishing between hands and background using color histograms and HOG classifiers,) making them not very robust. For example, these algorithms might get confused if the background is unusual or in situations where sharp changes in lighting conditions cause sharp changes in skin color or the tracked object becomes occluded.(see [here for a review](https://www.cse.unr.edu/~bebis/handposerev.pdf) paper on hand pose estimation from the HCI perspective) With sufficiently large datasets, neural networks provide opportunity to train models that perform well and address challenges of existing object tracking/detection algorithms - varied/poor lighting, noisy environments, diverse viewpoints and even occlusion. The main drawbacks to usage for real-time tracking/detection is that they can be complex, are relatively slow compared to tracking-only algorithms and it can be quite expensive to assemble a good dataset. But things are changing with advances in fast neural networks. Furthermore, this entire area of work has been made more approachable by deep learning frameworks (such as the tensorflow object detection api) that simplify the process of training a model for custom object detection. More importantly, the advent of fast neural network models like ssd, faster r-cnn, rfcn (see [here](https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/detection_model_zoo.md#coco-trained-models-coco-models) ) etc make neural networks an attractive candidate for real-time detection (and tracking) applications. Hopefully, this repo demonstrates this. > If you are not interested in the process of training the detector, you can skip straight to applying the [pretrained model I provide in detecting hands](#detecting-hands). Training a model is a multi-stage process (assembling dataset, cleaning, splitting into training/test partitions and generating an inference graph). While I lightly touch on the details of these parts, there are a few other tutorials cover training a custom object detector using the tensorflow object detection api in more detail[ see [here](https://pythonprogramming.net/training-custom-objects-tensorflow-object-detection-api-tutorial/) and [here](https://towardsdatascience.com/how-to-train-your-own-object-detector-with-tensorflows-object-detector-api-bec72ecfe1d9) ]. I recommend you walk through those if interested in training a custom object detector from scratch. ## Data preparation and network training in Tensorflow (Dataset, Import, Training) **The Egohands Dataset** The hand detector model is built using data from the [Egohands Dataset](http://vision.soic.indiana.edu/projects/egohands/) dataset. This dataset works well for several reasons. It contains high quality, pixel level annotations (>15000 ground truth labels) where hands are located across 4800 images. All images are captured from an egocentric view (Google glass) across 48 different environments (indoor, outdoor) and activities (playing cards, chess, jenga, solving puzzles etc). <img src="images/egohandstrain.jpg" width="100%"> If you will be using the Egohands dataset, you can cite them as follows: > Bambach, Sven, et al. "Lending a hand: Detecting hands and recognizing activities in complex egocentric interactions." Proceedings of the IEEE International Conference on Computer Vision. 2015. The Egohands dataset (zip file with labelled data) contains 48 folders of locations where video data was collected (100 images per folder). ``` -- LOCATION_X -- frame_1.jpg -- frame_2.jpg ... -- frame_100.jpg -- polygons.mat // contains annotations for all 100 images in current folder -- LOCATION_Y -- frame_1.jpg -- frame_2.jpg ... -- frame_100.jpg -- polygons.mat // contains annotations for all 100 images in current folder ``` **Converting data to Tensorflow Format** Some initial work needs to be done to the Egohands dataset to transform it into the format (`tfrecord`) which Tensorflow needs to train a model. This repo contains `egohands_dataset_clean.py` a script that will help you generate these csv files. - Downloads the egohands datasets - Renames all files to include their directory names to ensure each filename is unique - Splits the dataset into train (80%), test (10%) and eval (10%) folders. - Reads in `polygons.mat` for each folder, generates bounding boxes and visualizes them to ensure correctness (see image above). - Once the script is done running, you should have an images folder containing three folders - train, test and eval. Each of these folders should also contain a csv label document each - `train_labels.csv`, `test_labels.csv` that can be used to generate `tfrecords` Note: While the egohands dataset provides four separate labels for hands (own left, own right, other left, and other right), for my purpose, I am only interested in the general `hand` class and label all training data as `hand`. You can modify the data prep script to generate `tfrecords` that support 4 labels. Next: convert your dataset + csv files to tfrecords. A helpful guide on this can be found [here](https://pythonprogramming.net/creating-tfrecord-files-tensorflow-object-detection-api-tutorial/).For each folder, you should be able to generate `train.record`, `test.record` required in the training process. ## Training the hand detection Model Now that the dataset has been assembled (and your tfrecords), the next task is to train a model based on this. With neural networks, it is possible to use a process called [transfer learning](https://www.tensorflow.org/tutorials/image_retraining) to shorten the amount of time needed to train the entire model. This means we can take an existing model (that has been trained well on a related domain (here image classification) and retrain its final layer(s) to detect hands for us. Sweet!. Given that neural networks sometimes have thousands or millions of parameters that can take weeks or months to train, transfer learning helps shorten training time to possibly hours. Tensorflow does offer a few models (in the tensorflow [model zoo](https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/detection_model_zoo.md#coco-trained-models-coco-models)) and I chose to use the `ssd_mobilenet_v1_coco` model as my start point given it is currently (one of) the fastest models (read the SSD research [paper here](https://arxiv.org/pdf/1512.02325.pdf)). The training process can be done locally on your CPU machine which may take a while or better on a (cloud) GPU machine (which is what I did). For reference, training on my macbook pro (tensorflow compiled from source to take advantage of the mac's cpu architecture) the maximum speed I got was 5 seconds per step as opposed to the ~0.5 seconds per step I got with a GPU. For reference it would take about 12 days to run 200k steps on my mac (i7, 2.5GHz, 16GB) compared to ~5hrs on a GPU. > **Training on your own images**: Please use the [guide provided by Harrison from pythonprogramming](https://pythonprogramming.net/training-custom-objects-tensorflow-object-detection-api-tutorial/) on how to generate tfrecords given your label csv files and your images. The guide also covers how to start the training process if training locally. [see [here] (https://pythonprogramming.net/training-custom-objects-tensorflow-object-detection-api-tutorial/)]. If training in the cloud using a service like GCP, see the [guide here](https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/running_on_cloud.md). As the training process progresses, the expectation is that total loss (errors) gets reduced to its possible minimum (about a value of 1 or thereabout). By observing the tensorboard graphs for total loss(see image below), it should be possible to get an idea of when the training process is complete (total loss does not decrease with further iterations/steps). I ran my training job for 200k steps (took about 5 hours) and stopped at a total Loss (errors) value of 2.575.(In retrospect, I could have stopped the training at about 50k steps and gotten a similar total loss value). With tensorflow, you can also run an evaluation concurrently that assesses your model to see how well it performs on the test data. A commonly used metric for performance is mean average precision (mAP) which is single number used to summarize the area under the precision-recall curve. mAP is a measure of how well the model generates a bounding box that has at least a 50% overlap with the ground truth bounding box in our test dataset. For the hand detector trained here, the mAP value was **0.9686@0.5IOU**. mAP values range from 0-1, the higher the better. <img src="images/accuracy.jpg" width="100%"> Once training is completed, the trained inference graph (`frozen_inference_graph.pb`) is then exported (see the earlier referenced guides for how to do this) and saved in the `hand_inference_graph` folder. Now its time to do some interesting detection. ## Using the Detector to Detect/Track hands If you have not done this yet, please following the guide on installing [Tensorflow and the Tensorflow object detection api](https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/installation.md). This will walk you through setting up the tensorflow framework, cloning the tensorflow github repo and a guide on - Load the `frozen_inference_graph.pb` trained on the hands dataset as well as the corresponding label map. In this repo, this is done in the `utils/detector_utils.py` script by the `load_inference_graph` method. ```python detection_graph = tf.Graph() with detection_graph.as_default(): od_graph_def = tf.GraphDef() with tf.gfile.GFile(PATH_TO_CKPT, 'rb') as fid: serialized_graph = fid.read() od_graph_def.ParseFromString(serialized_graph) tf.import_graph_def(od_graph_def, name='') sess = tf.Session(graph=detection_graph) print("> ====== Hand Inference graph loaded.") ``` - Detect hands. In this repo, this is done in the `utils/detector_utils.py` script by the `detect_objects` method. ```python (boxes, scores, classes, num) = sess.run( [detection_boxes, detection_scores, detection_classes, num_detections], feed_dict={image_tensor: image_np_expanded}) ``` - Visualize detected bounding detection_boxes. In this repo, this is done in the `utils/detector_utils.py` script by the `draw_box_on_image` method. This repo contains two scripts that tie all these steps together. - detect_multi_threaded.py : A threaded implementation for reading camera video input detection and detecting. Takes a set of command line flags to set parameters such as `--display` (visualize detections), image parameters `--width` and `--height`, videe `--source` (0 for camera) etc. - detect_single_threaded.py : Same as above, but single threaded. This script works for video files by setting the video source parameter videe `--source` (path to a video file). ```cmd # load and run detection on video at path "videos/chess.mov" python detect_single_threaded.py --source videos/chess.mov ``` > Update: If you do have errors loading the frozen inference graph in this repo, feel free to generate a new graph that fits your TF version from the model-checkpoint in this repo. Use the [export_inference_graph.py](https://github.com/tensorflow/models/blob/master/research/object_detection/export_inference_graph.py) script provided in the tensorflow object detection api repo. More guidance on this [here](https://pythonprogramming.net/testing-custom-object-detector-tensorflow-object-detection-api-tutorial/?completed=/training-custom-objects-tensorflow-object-detection-api-tutorial/). ## Thoughts on Optimization. A few things that led to noticeable performance increases. - Threading: Turns out that reading images from a webcam is a heavy I/O event and if run on the main application thread can slow down the program. I implemented some good ideas from [Adrian Rosebuck](https://www.pyimagesearch.com/2017/02/06/faster-video-file-fps-with-cv2-videocapture-and-opencv/) on parrallelizing image capture across multiple worker threads. This mostly led to an FPS increase of about 5 points. - For those new to Opencv, images from the `cv2.read()` method return images in [BGR format](https://www.learnopencv.com/why-does-opencv-use-bgr-color-format/). Ensure you convert to RGB before detection (accuracy will be much reduced if you dont). ```python cv2.cvtColor(image_np, cv2.COLOR_BGR2RGB) ``` - Keeping your input image small will increase fps without any significant accuracy drop.(I used about 320 x 240 compared to the 1280 x 720 which my webcam provides). - Model Quantization. Moving from the current 32 bit to 8 bit can achieve up to 4x reduction in memory required to load and store models. One way to further speed up this model is to explore the use of [8-bit fixed point quantization](https://heartbeat.fritz.ai/8-bit-quantization-and-tensorflow-lite-speeding-up-mobile-inference-with-low-precision-a882dfcafbbd). Performance can also be increased by a clever combination of tracking algorithms with the already decent detection and this is something I am still experimenting with. Have ideas for optimizing better, please share! <img src="images/general.jpg" width="100%"> Note: The detector does reflect some limitations associated with the training set. This includes non-egocentric viewpoints, very noisy backgrounds (e.g in a sea of hands) and sometimes skin tone. There is opportunity to improve these with additional data. ## Integrating Multiple DNNs. One way to make things more interesting is to integrate our new knowledge of where "hands" are with other detectors trained to recognize other objects. Unfortunately, while our hand detector can in fact detect hands, it cannot detect other objects (a factor or how it is trained). To create a detector that classifies multiple different objects would mean a long involved process of assembling datasets for each class and a lengthy training process. > Given the above, a potential strategy is to explore structures that allow us **efficiently** interleave output form multiple pretrained models for various object classes and have them detect multiple objects on a single image. An example of this is with my primary use case where I am interested in understanding the position of objects on a table with respect to hands on same table. I am currently doing some work on a threaded application that loads multiple detectors and outputs bounding boxes on a single image. More on this soon.
light-launcher / Light Android LauncherMinimalistic, super lightweight app launcher with a low memory usage and small install size.
klonnet23 / Helloy Word{ "releases": { "2.0.4": [ "[Fixed] Refresh for Enterprise repositories did not handle API error querying branches - #7713", "[Fixed] Missing \"Discard all changes\" context menu in Changes header - #7696", "[Fixed] \"Select all\" keyboard shortcut not firing on Windows - #7759" ], "2.0.4-beta1": [ "[Fixed] Refresh for Enterprise repositories did not handle API error querying branches - #7713", "[Fixed] Missing \"Discard all changes\" context menu in Changes header - #7696", "[Fixed] \"Select all\" keyboard shortcut not firing on Windows - #7759" ], "2.0.4-beta0": [ "[Added] Extend crash reports with more information about application state for troubleshooting - #7693", "[Fixed] Crash when attempting to update pull requests with partially updated repository information - #7688", "[Fixed] Crash when loading repositories after signing in through the welcome flow - #7699" ], "2.0.3": [ "[Fixed] Crash when loading repositories after signing in through the welcome flow - #7699" ], "2.0.2": [ "[Added] Extend crash reports with more information about application state for troubleshooting - #7693" ], "2.0.1": [ "[Fixed] Crash when attempting to update pull requests with partially updated repository information - #7688" ], "2.0.0": [ "[New] You can now choose to bring your changes with you to a new branch or stash them on the current branch when switching branches - #6107", "[New] Rebase your current branch onto another branch using a guided flow - #5953", "[New] Repositories grouped by owner, and recent repositories listed at top - #6923 #7132", "[New] Suggested next steps now includes suggestion to create a pull request after publishing a branch - #7505", "[Added] .resx syntax highlighting - #7235. Thanks @say25!", "[Added] \"Exit\" menu item now has accelerator and access key - #6507. Thanks @AndreiMaga!", "[Added] Help menu entry to view documentation about keyboard shortcuts - #7184", "[Added] \"Discard all changes\" action under Branch menu - #7394. Thanks @ahuth!", "[Fixed] \"Esc\" key does not close Repository or Branch list - #7177. Thanks @roottool!", "[Fixed] Attempting to revert commits not on current branch results in an error - #6300. Thanks @msftrncs!", "[Fixed] Emoji rendering in app when account name has special characters - #6909", "[Fixed] Files staged outside Desktop for deletion are incorrectly marked as modified after committing - #4133", "[Fixed] Horizontal scroll bar appears unnecessarily when switching branches - #7212", "[Fixed] Icon accessibility labels fail when multiple icons are visible at the same time - #7174", "[Fixed] Incorrectly encoding URLs affects issue filtering - #7506", "[Fixed] License templates do not end with newline character - #6999", "[Fixed] Conflicts banners do not hide after aborting operation outside Desktop - #7046", "[Fixed] Missing tooltips for change indicators in the sidebar - #7174", "[Fixed] Mistaken classification of all crashes being related to launch - #7126", "[Fixed] Unable to switch keyboard layout and retain keyboard focus while using commit form - #6366. Thanks @AndreiMaga!", "[Fixed] Prevent console errors due to underlying component unmounts - #6970", "[Fixed] Menus disabled by activity in inactive repositories - #6313", "[Fixed] Race condition with Git remote lookup may cause push to incorrect remote - #6986", "[Fixed] Restore GitHub Desktop to main screen if external monitor removed - #7418 #2107. Thanks @say25!", "[Fixed] Tab Bar focus ring outlines clip into other elements - #5802. Thanks @Daniel-McCarthy!", "[Improved] \"Automatically Switch Theme\" on macOS checks theme on launch - #7116. Thanks @say25!", "[Improved] \"Add\" button in repository list should always be visible - #6646", "[Improved] Pull Requests list loads and updates pull requests from GitHub more quickly - #7501 #7163", "[Improved] Indicator hidden in Pull Requests list when there are no open pull requests - #7258", "[Improved] Manually refresh pull requests instead of having to wait for a fetch - #7027", "[Improved] Accessibility attributes for dialog - #6496. Thanks @HirdayGupta!", "[Improved] Alignment of icons in repository list - #7133", "[Improved] Command line interface warning when using \"github open\" with a remote URL - #7452. Thanks @msztech!", "[Improved] Error message when unable to publish private repository to an organization - #7472", "[Improved] Initiate cloning by pressing \"Enter\" when a repository is selected - #6570. Thanks @Daniel-McCarthy!", "[Improved] Lowercase pronoun in \"Revert this commit\" menu item - #7534", "[Improved] Styles for manual resolution button in \"Resolve Conflicts\" dialog - #7302", "[Improved] Onboarding language for blank slate components - #6638. Thanks @jamesgeorge007!", "[Improved] Explanation for manually conflicted text files in diff viewer - #7611", "[Improved] Visual progress on \"Remove Repository\" and \"Discard Changes\" dialogs - #7015. Thanks @HashimotoYT!", "[Improved] Menu items now aware of force push state and preference to confirm repository removal - #4976 #7138", "[Removed] Branch and pull request filter text persistence - #7437", "[Removed] \"Discard all changes\" context menu item from Changes list - #7394. Thanks @ahuth!" ], "1.7.1-beta1": [ "[Fixed] Tab Bar focus ring outlines clip into other elements - #5802. Thanks @Daniel-McCarthy!", "[Improved] Show explanation for manually conflicted text files in diff viewer - #7611", "[Improved] Alignment of entries in repository list - #7133" ], "1.7.0-beta9": [ "[Fixed] Add warning when renaming a branch with a stash - #7283", "[Fixed] Restore Desktop to main screen when external monitor removed - #7418 #2107. Thanks @say25!", "[Improved] Performance for bringing uncommitted changes to another branch - #7474" ], "1.7.0-beta8": [ "[Added] Accelerator and access key to \"Exit\" menu item - #6507. Thanks @AndreiMaga!", "[Fixed] Pressing \"Shift\" + \"Alt\" in Commit summary moves input-focus to app menu - #6366. Thanks @AndreiMaga!", "[Fixed] Incorrectly encoding URLs affects issue filtering - #7506", "[Improved] Command line interface warns with helpful message when given a remote URL - #7452. Thanks @msztech!", "[Improved] Lowercase pronoun in \"Revert this commit\" menu item - #7534", "[Improved] \"Pull Requests\" list reflects pull requests from GitHub more quickly - #7501", "[Removed] Branch and pull request filter text persistence - #7437" ], "1.7.0-beta7": [ "[Improved] Error message when unable to publish private repository to an organization - #7472", "[Improved] \"Stashed changes\" button accessibility improvements - #7274", "[Improved] Performance improvements for bringing changes to another branch - #7471", "[Improved] Performance improvements for detecting conflicts from a restored stash - #7476" ], "1.7.0-beta6": [ "[Fixed] Stash viewer does not disable restore button when changes present - #7409", "[Fixed] Stash viewer does not center \"no content\" text - #7299", "[Fixed] Stash viewer pane width not remembered between sessions - #7416", "[Fixed] \"Esc\" key does not close Repository or Branch list - #7177. Thanks @roottool!", "[Fixed] Stash not cleaned up when it conflicts with working directory contents - #7383", "[Improved] Branch names remain accurate in dialog when stashing and switching branches - #7402", "[Improved] Moved \"Discard all changes\" to Branch menu to prevent unintentionally discarding all changes - #7394. Thanks @ahuth!", "[Improved] UI responsiveness when using keyboard to choose branch in rebase flow - #7407" ], "1.7.0-beta5": [ "[Fixed] Handle warnings if stash creation encounters file permission issue - #7351", "[Fixed] Add \"View stash entry\" action to suggested next steps - #7353", "[Fixed] Handle and recover from failed rebase flow starts - #7223", "[Fixed] Reverse button order when viewing a stash on macOS - #7273", "[Fixed] Prevent console errors due to underlying component unmounts - #6970", "[Fixed] Rebase success banner always includes base branch name - #7220", "[Improved] Added explanatory text for \"Restore\" button for stashes - #7303", "[Improved] Ask for confirmation before discarding stash - #7348", "[Improved] Order stashed changes files alphabetically - #7327", "[Improved] Clarify \"Overwrite Stash Confirmation\" dialog text - #7361", "[Improved] Message shown in rebase setup when target branch is already rebased - #7343", "[Improved] Update stashing prompt verbiage - #7393.", "[Improved] Update \"Start Rebase\" dialog verbiage - #7391", "[Improved] Changes list now reflects what will be committed when handling rebase conflicts - #7006" ], "1.7.0-beta4": [ "[Fixed] Manual conflict resolution choice not updated when resolving rebase conflicts - #7255", "[Fixed] Menu items don't display the expected verbiage for force push and removing a repository - #4976 #7138" ], "1.7.0-beta3": [ "[New] Users can choose to bring changes with them to a new branch or stash them on the current branch when switching branches - #6107", "[Added] GitHub Desktop keyboard shortcuts available in Help menu - #7184", "[Added] .resx file extension highlighting support - #7235. Thanks @say25!", "[Fixed] Attempting to revert commits not on current branch results in an error - #6300. Thanks @msftrncs!", "[Improved] Warn users before rebase if operation will require a force push after rebase complete - #6963", "[Improved] Do not show the number of pull requests when there are no open pull requests - #7258", "[Improved] Accessibility attributes for dialog - #6496. Thanks @HirdayGupta!", "[Improved] Initiate cloning by pressing \"Enter\" when a repository is selected - #6570. Thanks @Daniel-McCarthy!", "[Improved] Manual Conflicts button styling - #7302", "[Improved] \"Add\" button in repository list should always be visible - #6646" ], "1.7.0-beta2": [ "[New] Rebase your current branch onto another branch using a guided flow - #5953", "[Fixed] Horizontal scroll bar appears unnecessarily when switching branches - #7212", "[Fixed] License templates do not end with newline character - #6999", "[Fixed] Merge/Rebase conflicts banners do not clear when aborting the operation outside Desktop - #7046", "[Fixed] Missing tooltips for change indicators in the sidebar - #7174", "[Fixed] Icon accessibility labels fail when multiple icons are visible at the same time - #7174", "[Improved] Pull requests load faster and PR build status updates automatically - #7163" ], "1.7.0-beta1": [ "[New] Recently opened repositories appear at the top of the repository list - #7132", "[Fixed] Error when selecting diff text while diff is updating - #7131", "[Fixed] Crash when unable to create log file on disk - #7096", "[Fixed] Race condition with remote lookup could cause push to go to incorrect remote - #6986", "[Fixed] Mistaken classification of all crashes being related to launch - #7126", "[Fixed] Prevent menus from being disabled by activity in inactive repositories - #6313", "[Fixed] \"Automatically Switch Theme\" on macOS does not check theme on launch - #7116. Thanks @say25!", "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Emoji rendering in app broken when account name has special characters - #6909", "[Fixed] Files staged outside Desktop for deletion are incorrectly marked as modified after committing - #4133", "[Improved] Visual feedback on \"Remove Repository\" and \"Discard Changes\" dialogs to show progress - #7015. Thanks @HashimotoYT!", "[Improved] Onboarding language for blank slate components - #6638. Thanks @jamesgeorge007!", "[Improved] Manually refresh pull requests instead of having to wait for a fetch - #7027" ], "1.6.6": [ "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Handle error when unable to create log file for app - #7096", "[Fixed] Crash when selecting text while the underlying diff changes - #7131" ], "1.6.6-test1": [ "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Handle error when unable to create log file for app - #7096", "[Fixed] Crash when selecting text while the underlying diff changes - #7131" ], "1.6.5": [ "[Fixed] Publish Repository does not let you publish to an organization on your Enterprise account - #7052" ], "1.6.5-beta2": [ "[Fixed] Publish Repository does not let you choose an organization on your Enterprise account - #7052" ], "1.6.5-beta1": [ "[Fixed] Publish Repository does not let you choose an organization on your Enterprise account - #7052" ], "1.6.4": [ "[Fixed] Embedded Git not working for core.longpath usage in some environments - #7028", "[Fixed] \"Recover missing repository\" can get stuck in a loop - #7038" ], "1.6.4-beta1": [ "[Fixed] Embedded Git not working for core.longpath usage in some environments - #7028", "[Fixed] \"Recover missing repository\" can get stuck in a loop - #7038" ], "1.6.4-beta0": [ "[Removed] Option to discard when files would be overwritten by a checkout - #7016" ], "1.6.3": [ "[New] Display \"pull with rebase\" if a user has set this option in their Git config - #6553 #3422", "[Fixed] Context menu does not open when right clicking on the edges of files in Changes list - #6296. Thanks @JQuinnie!", "[Fixed] Display question mark in image when no commit selected in dark theme - #6915. Thanks @say25!", "[Fixed] No left padding for :emoji:/@user/#issue autocomplete forms. - #6895. Thanks @murrelljenna!", "[Fixed] Reinstate missing image and update illustration in dark theme when no local changes exist - #6894", "[Fixed] Resizing the diff area preserves text selection range - #2677", "[Fixed] Text selection in wrapped diff lines now allows selection of individual lines - #1551", "[Improved] Add option to fetch when a user needs to pull changes from the remote before pushing - #2738 #5451", "[Improved] Enable Git protocol v2 for fetch/push/pull operations - #6142", "[Improved] Moving mouse pointer outside visible diff while selecting a range of lines in a partial commit now automatically scrolls the diff - #658", "[Improved] Sign in form validates both username and password - #6952. Thanks @say25!", "[Improved] Update GitHub logo in \"About\" dialog - #5619. Thanks @HashimotoYT!" ], "1.6.3-beta4": [ "[Improved] Update GitHub logo in \"About\" dialog - #5619. Thanks @HashimotoYT!", "[Improved] Sign in form validates both username and password - #6952. Thanks @say25!" ], "1.6.3-beta3": [ "[New] Display \"pull with rebase\" if a user has set this option in their Git config - #6553 #3422", "[Added] Provide option to discard when files would be overwritten by a checkout - #6755. Thanks @mathieudutour!", "[Fixed] No left padding for :emoji:/@user/#issue autocomplete forms. - #6895. Thanks @murrelljenna!", "[Fixed] Reinstate missing image and fix illustration to work in the dark theme when there are no local changes - #6894", "[Fixed] Display question mark image when there is no commit selected in dark theme - #6915. Thanks @say25!", "[Improved] Group and filter repositories by owner - #6923", "[Improved] Add option to fetch when a user needs to pull changes from the remote before pushing - #2738 #5451" ], "1.6.3-beta2": [ "[Fixed] Text selection in wrapped diff lines now allows selection of individual lines - #1551", "[Fixed] Resizing the diff area preserves text selection range - #2677", "[Improved] Moving the mouse pointer outside of the visible diff while selecting a range of lines in a partial commit will now automatically scroll the diff - #658" ], "1.6.3-beta1": [ "[New] Branches that have been merged and deleted on GitHub.com will now be pruned after two weeks - #750", "[Fixed] Context menu doesn't open when right clicking on the edges of files in Changes list - #6296. Thanks @JQuinnie!", "[Improved] Enable Git protocol v2 for fetch/push/pull operations - #6142", "[Improved] Upgrade to Electron v3 - #6391" ], "1.6.2": [ "[Added] Allow users to also resolve manual conflicts when resolving merge conflicts - #6062", "[Added] Automatic switching between Dark and Light modes on macOS - #5037. Thanks @say25!", "[Added] Crystal and Julia syntax highlighting - #6710. Thanks @KennethSweezy!", "[Added] Lua and Fortran syntax highlighting - #6700. Thanks @SimpleBinary!", "[Fixed] Abbreviated commits are not long enough for large repositories - #6662. Thanks @say25!", "[Fixed] App menu bar visible on hover on Windows when in \"Let’s get started\" mode - #6669", "[Fixed] Fix pointy corners on commit message text area - #6635. Thanks @lisavogtsf!", "[Fixed] Inconsistent \"Reveal in …\" labels for context menus - #6466. Thanks @say25!", "[Fixed] Merge conflict conflict did not ask user to resolve some binary files - #6693", "[Fixed] Prevent concurrent fetches between user and status indicator checks - #6121 #5438 #5328", "[Fixed] Remember scroll positions in History and Changes lists - #5177 #5059. Thanks @Daniel-McCarthy!", "[Improved] Guided merge conflict resolution only commits changes relevant to the merge - #6349", "[Improved] Use higher contrast color for links in \"Merge Conflicts\" dialog - #6758", "[Improved] Add link to all release notes in Release Notes dialog - #6443. Thanks @koralcem!", "[Improved] Arrow for renamed/copied changes when viewing commit - #6519. Thanks @koralcem!", "[Improved] Updated verbiage for ignoring the files - #6689. Thanks @PaulViola!" ], "1.6.2-beta3": [ "[Improved] Guided merge conflict resolution only commits changes relevant to the merge - #6349" ], "1.6.2-beta2": [ "[Added] Allow users to also resolve manual conflicts when resolving merge conflicts - #6062", "[Added] Crystal and Julia syntax highlighting - #6710. Thanks @KennethSweezy!", "[Fixed] Fix pointy corners on commit message text area - #6635. Thanks @lisavogtsf!", "[Fixed] Use higher contrast color for links in \"Merge Conflicts\" dialog - #6758" ], "1.6.2-beta1": [ "[Added] Automatic switching between Dark and Light modes on macOS - #5037. Thanks @say25!", "[Added] Lua and Fortran syntax highlighting - #6700. Thanks @SimpleBinary!", "[Fixed] Abbreviated commits are not long enough for large repositories - #6662. Thanks @say25!", "[Fixed] App menu bar visible on hover on Windows when in \"Let’s get started\" mode - #6669", "[Fixed] Remember scroll positions in History and Changes lists - #5177 #5059. Thanks @Daniel-McCarthy!", "[Fixed] Inconsistent \"Reveal in …\" labels for context menus - #6466. Thanks @say25!", "[Fixed] Prevent concurrent fetches between user and status indicator checks - #6121 #5438 #5328", "[Fixed] Merge conflict conflict did not ask user to resolve some binary files - #6693", "[Improved] Add link to all release notes in Release Notes dialog - #6443. Thanks @koralcem!", "[Improved] Arrow for renamed/copied changes when viewing commit - #6519. Thanks @koralcem!", "[Improved] Menu state updating to address race condition - #6643", "[Improved] Updated verbiage when clicking on changed files to make it more explicit what will occur when you ignore the file(s) - #6689. Thanks @PaulViola!" ], "1.6.2-beta0": [ "[Fixed] Don't show \"No local changes\" view when switching between changed files" ], "1.6.1": [ "[Fixed] Don't show \"No local changes\" view when switching between changed files" ], "1.6.0": [ "[New] Help users add their first repo during onboarding - #6474", "[New] \"No local changes\" view helpfully suggests next actions for you to take - #6445", "[Added] Support JetBrains Webstorm as an external editor - #6077. Thanks @KennethSweezy!", "[Added] Add Visual Basic syntax highlighting - #6461. Thanks @SimpleBinary!", "[Fixed] Automatically locate a missing repository when it cannot be found - #6228. Thanks @msftrncs!", "[Fixed] Don't include untracked files in merge commit - #6411", "[Fixed] Don't show \"Still Conflicted Warning\" when all conflicts are resolved - #6451", "[Fixed] Only execute menu action a single time upon hitting Enter - #5344", "[Fixed] Show autocompletion of GitHub handles and issues properly in commit description field - #6459", "[Improved] Repository list when no repositories found - #5566 #6474", "[Improved] Image diff menu no longer covered by large images - #6520. Thanks @06b!", "[Improved] Enable additional actions during a merge conflict - #6385", "[Improved] Increase contrast on input placeholder color in dark mode - #6556", "[Improved] Don't show merge success banner when attempted merge doesn't complete - #6282", "[Improved] Capitalize menu items appropriately on macOS - #6469" ], "1.6.0-beta3": [ "[Fixed] Autocomplete selection does not overflow text area - #6459", "[Fixed] No local changes views incorrectly rendering ampersands - #6596", "[Improved] Capitalization of menu items on macOS - #6469" ], "1.6.0-beta2": [ "[New] \"No local changes\" view makes it easy to find and accomplish common actions - #6445", "[Fixed] Automatically locate a missing repository when it cannot be found - #6228. Thanks @msftrncs!", "[Improved] Enable additional actions during a merge conflict - #6385", "[Improved] Increase contrast on input placeholder color in dark mode - #6556", "[Improved] Merge success banner no longer shown when attempted merge doesn't complete - #6282" ], "1.6.0-beta1": [ "[New] Help users add their first repo during onboarding - #6474", "[Added] Include ability for users to add new repositories when there are none available - #5566 #6474", "[Added] Support JetBrains Webstorm as an external editor - #6077. Thanks @KennethSweezy!", "[Added] Add Visual Basic syntax highlighting - #6461. Thanks @SimpleBinary!", "[Fixed] Don't include untracked files in merge commit - #6411", "[Fixed] Don't show \"Still Conflicted Warning\" when all conflicts are resolved - #6451", "[Fixed] Enter when using keyboard to navigate app menu executed menu action twice - #5344", "[Improved] Image diff menu no longer covered by large images - #6520. Thanks @06b!" ], "1.5.2-beta0": [], "1.5.1": [ "[Added] Provide keyboard shortcut for getting to commit summary field - #1719. Thanks @bruncun!", "[Added] Add hover states on list items and tabs - #6310", "[Added] Add Dockerfile syntax highlighting - #4533. Thanks @say25!", "[Added] Support Visual SlickEdit as an external editor - #6029. Thanks @texasaggie97!", "[Fixed] Allow repositories to be cloned to empty folders - #5857. Thanks @Daniel-McCarthy!", "[Fixed] Prevent creating branch with detached HEAD from reverting to default branch - #6085", "[Fixed] Fix \"Open In External Editor\" for Atom/VS Code on Windows when paths contain spaces - #6181. Thanks @msftrncs!", "[Fixed] Persist Branch List and Pull Request List filter text - #6002. Thanks @Daniel-McCarthy!", "[Fixed] Retain renamed branches position in recent branches list - #6155. Thanks @gnehcc!", "[Fixed] Prevent avatar duplication when user is co-author and committer - #6135. Thanks @bblarney!", "[Fixed] Provide keyboard selection for the \"Clone a Repository\" dialog - #3596. Thanks @a-golovanov!", "[Fixed] Close License & Open Source Notices dialog upon pressing \"Enter\" in dialog - #6137. Thanks @bblarney!", "[Fixed] Dismiss \"Merge into Branch\" dialog with escape key - #6154. Thanks @altaf933!", "[Fixed] Focus branch selector when comparing to branch from menu - #5600", "[Fixed] Reverse fold/unfold icons for expand/collapse commit summary - #6196. Thanks @HazemAM!", "[Improved] Allow toggling between diff modes - #6231. Thanks @06b!", "[Improved] Show focus around full input field - #6234. Thanks @seokju-na!", "[Improved] Make lists scroll to bring selected items into view - #6279", "[Improved] Consistently order the options for adding a repository - #6396. Thanks @vilanz!", "[Improved] Clear merge conflicts banner after there are no more conflicted files - #6428" ], "1.5.1-beta6": [ "[Improved] Consistently order the options for adding a repository - #6396. Thanks @vilanz!", "[Improved] Clear merge conflicts banner after there are no more conflicted files - #6428" ], "1.5.1-beta5": [ "[Improved] Commit conflicted files warning - #6381", "[Improved] Dismissable merge conflict dialog and associated banner - #6379 #6380", "[Fixed] Fix feature flag for readme overwrite warning so that it shows on beta - #6412" ], "1.5.1-beta4": [ "[Improved] Display warning if existing readme file will be overwritten - #6338. Thanks @Daniel-McCarthy!", "[Improved] Add check for attempts to commit >100 MB files without Git LFS - #997. Thanks @Daniel-McCarthy!", "[Improved] Merge conflicts dialog visual updates - #6377" ], "1.5.1-beta3": [ "[Improved] Maintains state on tabs for different methods of cloning repositories - #5937" ], "1.5.1-beta2": [ "[Improved] Clarified internal documentation - #6348. Thanks @bblarney!" ], "1.5.1-beta1": [ "[Added] Provide keyboard shortcut for getting to commit summary field - #1719. Thanks @bruncun!", "[Added] Add hover states on list items and tabs - #6310", "[Added] Add Dockerfile syntax highlighting - #4533. Thanks @say25!", "[Added] Support Visual SlickEdit as an external editor - #6029. Thanks @texasaggie97!", "[Improved] Allow toggling between diff modes - #6231. Thanks @06b!", "[Improved] Show focus around full input field - #6234. Thanks @seokju-na!", "[Improved] Make lists scroll to bring selected items into view - #6279", "[Fixed] Allow repositories to be cloned to empty folders - #5857. Thanks @Daniel-McCarthy!", "[Fixed] Prevent creating branch with detached HEAD from reverting to default branch - #6085", "[Fixed] Fix 'Open In External Editor' for Atom/VS Code on Windows when paths contain spaces - #6181. Thanks @msftrncs!", "[Fixed] Persist Branch List and Pull Request List filter text - #6002. Thanks @Daniel-McCarthy!", "[Fixed] Retain renamed branches position in recent branches list - #6155. Thanks @gnehcc!", "[Fixed] Prevent avatar duplication when user is co-author and committer - #6135. Thanks @bblarney!", "[Fixed] Provide keyboard selection for the ‘Clone a Repository’ dialog - #3596. Thanks @a-golovanov!", "[Fixed] Close License & Open Source Notices dialog upon pressing \"Enter\" in dialog - #6137. Thanks @bblarney!", "[Fixed] Dismiss \"Merge into Branch\" dialog with escape key - #6154. Thanks @altaf933!", "[Fixed] Focus branch selector when comparing to branch from menu - #5600", "[Fixed] Reverse fold/unfold icons for expand/collapse commit summary - #6196. Thanks @HazemAM!" ], "1.5.1-beta0": [], "1.5.0": [ "[New] Clone, create, or add repositories right from the repository dropdown - #5878", "[New] Drag-and-drop to add local repositories from macOS tray icon - #5048", "[Added] Resolve merge conflicts through a guided flow - #5400", "[Added] Allow merging branches directly from branch dropdown - #5929. Thanks @bruncun!", "[Added] Commit file list now has \"Copy File Path\" context menu action - #2944. Thanks @Amabel!", "[Added] Keyboard shortcut for \"Rename Branch\" menu item - #5964. Thanks @agisilaos!", "[Added] Notify users when a merge is successfully completed - #5851", "[Fixed] \"Compare on GitHub\" menu item enabled when no repository is selected - #6078", "[Fixed] Diff viewer blocks keyboard navigation using reverse tab order - #2794", "[Fixed] Launching Desktop from browser always asks to clone repository - #5913", "[Fixed] Publish dialog displayed on push when repository is already published - #5936", "[Improved] \"Publish Repository\" dialog handles emoji characters - #5980. Thanks @WaleedAshraf!", "[Improved] Avoid repository checks when no path is specified in \"Create Repository\" dialog - #5828. Thanks @JakeHL!", "[Improved] Clarify the direction of merging branches - #5930. Thanks @JQuinnie!", "[Improved] Default commit summary more explanatory and consistent with GitHub.com - #6017. Thanks @Daniel-McCarthy!", "[Improved] Display a more informative message on merge dialog when branch is up to date - #5890", "[Improved] Getting a repository's status only blocks other operations when absolutely necessary - #5952", "[Improved] Display current branch in header of merge dialog - #6027", "[Improved] Sanitize repository name before publishing to GitHub - #3090. Thanks @Daniel-McCarthy!", "[Improved] Show the branch name in \"Update From Default Branch\" menu item - #3018. Thanks @a-golovanov!", "[Improved] Update license and .gitignore templates for initializing a new repository - #6024. Thanks @say25!" ], "1.5.0-beta5": [], "1.5.0-beta4": [ "[Fixed] \"Compare on GitHub\" menu item enabled when no repository is selected - #6078", "[Fixed] Diff viewer blocks keyboard navigation using reverse tab order - #2794", "[Improved] \"Publish Repository\" dialog handles emoji characters - #5980. Thanks @WaleedAshraf!" ], "1.5.0-beta3": [], "1.5.0-beta2": [ "[Added] Resolve merge conflicts through a guided flow - #5400", "[Added] Notify users when a merge is successfully completed - #5851", "[Added] Allow merging branches directly from branch dropdown - #5929. Thanks @bruncun!", "[Improved] Merge dialog displays current branch in header - #6027", "[Improved] Clarify the direction of merging branches - #5930. Thanks @JQuinnie!", "[Improved] Show the branch name in \"Update From Default Branch\" menu item - #3018. Thanks @a-golovanov!", "[Improved] Default commit summary more explanatory and consistent with GitHub.com - #6017. Thanks @Daniel-McCarthy!", "[Improved] Updated license and .gitignore templates for initializing a new repository - #6024. Thanks @say25!" ], "1.5.0-beta1": [ "[New] Repository switcher has a convenient \"Add\" button to add other repositories - #5878", "[New] macOS tray icon now supports drag-and-drop to add local repositories - #5048", "[Added] Keyboard shortcut for \"Rename Branch\" menu item - #5964. Thanks @agisilaos!", "[Added] Commit file list now has \"Copy File Path\" context menu action - #2944. Thanks @Amabel!", "[Fixed] Launching Desktop from browser always asks to clone repository - #5913", "[Fixed] Publish dialog displayed on push when repository is already published - #5936", "[Improved] Sanitize repository name before publishing to GitHub - #3090. Thanks @Daniel-McCarthy!", "[Improved] Getting a repository's status only blocks other operations when absolutely necessary - #5952", "[Improved] Avoid repository checks when no path is specified in \"Create Repository\" dialog - #5828. Thanks @JakeHL!", "[Improved] Display a more informative message on merge dialog when branch is up to date - #5890" ], "1.4.4-beta0": [], "1.4.3": [ "[Added] Add \"Remove Repository\" keyboard shortcut - #5848. Thanks @say25!", "[Added] Add keyboard shortcut to delete a branch - #5018. Thanks @JakeHL!", "[Fixed] Emoji autocomplete not rendering in some situations - #5859", "[Fixed] Release notes text overflowing dialog box - #5854. Thanks @amarsiingh!", "[Improved] Support Python 3 in Desktop CLI on macOS - #5843. Thanks @munir131!", "[Improved] Avoid unnecessarily reloading commit history - #5470", "[Improved] Publish Branch dialog will publish commits when pressing Enter - #5777. Thanks @JKirkYuan!" ], "1.4.3-beta2": [ "[Added] Added keyboard shortcut to delete a branch - #5018. Thanks @JakeHL!", "[Fixed] Fix release notes text overflowing dialog box - #5854. Thanks @amarsiingh!", "[Improved] Avoid unnecessarily reloading commit history - #5470" ], "1.4.3-beta1": [ "[Added] Add \"Remove Repository\" keyboard shortcut - #5848. Thanks @say25!", "[Fixed] Fix emoji autocomplete not rendering in some situations - #5859", "[Fixed] Support Python 3 in Desktop CLI on macOS - #5843. Thanks @munir131!", "[Improved] Publish Branch dialog will publish commits when pressing Enter - #5777. Thanks @JKirkYuan!" ], "1.4.3-beta0": [], "1.4.2": [ "[New] Show resolved conflicts as resolved in Changes pane - #5609", "[Added] Add Terminator, MATE Terminal, and Terminology shells - #5753. Thanks @joaomlneto!", "[Fixed] Update embedded Git to version 2.19.1 for security vulnerability fix", "[Fixed] Always show commit history list when History tab is clicked - #5783. Thanks @JKirkYuan!", "[Fixed] Stop overriding the protocol of a detected GitHub repository - #5721", "[Fixed] Update sign in error message - #5766. Thanks @tiagodenoronha!", "[Fixed] Correct overflowing T&C and License Notices dialogs - #5756. Thanks @amarsiingh!", "[Improved] Add default commit message for single-file commits - #5240. Thanks @lean257!", "[Improved] Refresh commit list faster after reverting commit via UI - #5752", "[Improved] Add repository path to Remove repository dialog - #5805. Thanks @NickCraver!", "[Improved] Display whether user entered incorrect username or email address - #5775. Thanks @tiagodenoronha!", "[Improved] Update Discard Changes dialog text when discarding all changes - #5744. Thanks @Daniel-McCarthy!" ], "1.4.2-beta0": [], "1.4.1-test2": [ "Testing changes to how Desktop performs CI platform checks" ], "1.4.1-test1": [ "Testing changes to how Desktop performs CI platform checks" ], "1.4.1": [ "[Added] Support for opening repository in Cygwin terminal - #5654. Thanks @LordOfTheThunder!", "[Fixed] 'Compare to Branch' menu item not disabled when modal is open - #5673. Thanks @kanishk98!", "[Fixed] Co-author form does not show/hide for newly-added repository - #5490", "[Fixed] Desktop command line always suffixes `.git` to URL when starting a clone - #5529. Thanks @j-f1!", "[Fixed] Dialog styling issue for dark theme users on Windows - #5629. Thanks @cwongmath!", "[Fixed] No message shown when filter returns no results in Clone Repository view - #5637. Thanks @DanielHix!", "[Improved] Branch names cannot start with a '+' character - #5594. Thanks @Daniel-McCarthy!", "[Improved] Clone dialog re-runs filesystem check when re-focusing on Desktop - #5518. Thanks @Daniel-McCarthy!", "[Improved] Commit disabled when commit summary is only spaces - #5677. Thanks @Daniel-McCarthy!", "[Improved] Commit summary expander sometimes shown when not needed - #5700. Thanks @aryyya!", "[Improved] Error handling when looking for merge base of a missing ref - #5612", "[Improved] Warning if branch exists on remote when creating branch - #5141. Thanks @Daniel-McCarthy!" ], "1.4.1-beta1": [ "[Added] Support for opening repository in Cygwin terminal - #5654. Thanks @LordOfTheThunder!", "[Fixed] 'Compare to Branch' menu item not disabled when modal is open - #5673. Thanks @kanishk98!", "[Fixed] No message shown when filter returns no results in Clone Repository view - #5637. Thanks @DanielHix!", "[Fixed] Co-author form does not show/hide for newly-added repository - #5490", "[Fixed] Dialog styling issue for dark theme users on Windows - #5629. Thanks @cwongmath!", "[Fixed] Desktop command line always suffixes `.git` to URL when starting a clone - #5529. Thanks @j-f1!", "[Improved] Commit summary expander sometimes shown when not needed - #5700. Thanks @aryyya!", "[Improved] Commit disabled when commit summary is only spaces - #5677. Thanks @Daniel-McCarthy!", "[Improved] Error handling when looking for merge base of a missing ref - #5612", "[Improved] Clone dialog re-runs filesystem check when re-focusing on Desktop - #5518. Thanks @Daniel-McCarthy!", "[Improved] Branch names cannot start with a '+' character - #5594. Thanks @Daniel-McCarthy!", "[Improved] Warning if branch exists on remote when creating branch - #5141. Thanks @Daniel-McCarthy!" ], "1.4.1-beta0": [], "1.4.0": [ "[New] When an update is available for GitHub Desktop, release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Fixed] Caret in co-author selector is hidden when dark theme enabled - #5589", "[Fixed] Authenticating to GitHub Enterprise fails when user has no emails defined - #5585", "[Improved] Avoid multiple lookups of default remote - #5399" ], "1.4.0-beta3": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta2": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta1": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta0": [], "1.3.5": [ "[Fixed] Disable delete button while deleting a branch - #5331", "[Fixed] History now avoids calling log.showSignature if set in config - #5466", "[Fixed] Start blocking the ability to add local bare repositories - #4293. Thanks @Daniel-McCarthy!", "[Fixed] Revert workaround for tooltip issue on Windows - #3362. Thanks @divayprakash!", "[Improved] Error message when publishing to missing organisation - #5380. Thanks @Daniel-McCarthy!", "[Improved] Don't hide commit details when commit description is expanded. - #5471. Thanks @aryyya!" ], "1.3.5-beta1": [ "[Fixed] Disable delete button while deleting a branch - #5331", "[Fixed] History now avoids calling log.showSignature if set in config - #5466", "[Fixed] Start blocking the ability to add local bare repositories - #4293. Thanks @Daniel-McCarthy!", "[Fixed] Revert workaround for tooltip issue on Windows - #3362. Thanks @divayprakash!", "[Improved] Error message when publishing to missing organisation - #5380. Thanks @Daniel-McCarthy!", "[Improved] Don't hide commit details when commit summary description is expanded. - #5471. Thanks @aryyya!" ], "1.3.5-beta0": [], "1.3.4": [ "[Improved] Cloning message uses remote repo name not file destination - #5413. Thanks @lisavogtsf!", "[Improved] Support VSCode user scope installation - #5281. Thanks @saschanaz!" ], "1.3.4-beta1": [ "[Improved] Cloning message uses remote repo name not file destination - #5413. Thanks @lisavogtsf!", "[Improved] Support VSCode user scope installation - #5281. Thanks @saschanaz!" ], "1.3.4-beta0": [], "1.3.3": [ "[Fixed] Maximize and restore app on Windows does not fill available space - #5033", "[Fixed] 'Clone repository' menu item label is obscured on Windows - #5348. Thanks @Daniel-McCarthy!", "[Fixed] User can toggle files when commit is in progress - #5341. Thanks @masungwon!", "[Improved] Repository indicator background work - #5317 #5326 #5363 #5241 #5320" ], "1.3.3-beta1": [ "[Fixed] Maximize and restore app on Windows does not fill available space - #5033", "[Fixed] 'Clone repository' menu item label is obscured on Windows - #5348. Thanks @Daniel-McCarthy!", "[Fixed] User can toggle files when commit is in progress - #5341. Thanks @masungwon!", "[Improved] Repository indicator background work - #5317 #5326 #5363 #5241 #5320" ], "1.3.3-test6": ["Testing infrastructure changes"], "1.3.3-test5": ["Testing the new CircleCI config changes"], "1.3.3-test4": ["Testing the new CircleCI config changes"], "1.3.3-test3": ["Testing the new CircleCI config changes"], "1.3.3-test2": ["Testing the new CircleCI config changes"], "1.3.3-test1": ["Testing the new CircleCI config changes"], "1.3.2": [ "[Fixed] Bugfix for background checks not being aware of missing repositories - #5282", "[Fixed] Check the local state of a repository before performing Git operations - #5289", "[Fixed] Switch to history view for default branch when deleting current branch during a compare - #5256", "[Fixed] Handle missing .git directory inside a tracked repository - #5291" ], "1.3.2-beta1": [ "[Fixed] Bugfix for background checks not being aware of missing repositories - #5282", "[Fixed] Check the local state of a repository before performing Git operations - #5289", "[Fixed] Switch to history view for default branch when deleting current branch during a compare - #5256", "[Fixed] Handle missing .git directory inside a tracked repository - #5291" ], "1.3.1": [ "[Fixed] Background Git operations on missing repositories are not handled as expected - #5282" ], "1.3.1-beta1": [ "[Fixed] Background Git operations on missing repositories are not handled as expected - #5282" ], "1.3.1-beta0": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes indicator and ahead/behind information - #2259 #5095", "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Added] Syntax highlighting for PowerShell files - #5081. Thanks @say25!", "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Display root directory name when repository is located at drive root - #4924", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Fixed] History omits latest commit from list - #5243", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Improved] Change primary button color to blue for dark theme - #5074", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes indicator and ahead/behind information - #2259 #5095", "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Added] Syntax highlighting for PowerShell files - #5081. Thanks @say25!", "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Display root directory name when repository is located at drive root - #4924", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Fixed] History omits latest commit from list - #5243", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Improved] Change primary button color to blue for dark theme - #5074", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0-beta7": [], "1.3.0-beta6": [], "1.3.0-beta5": [ "[Fixed] Ensure commit message is cleared after successful commit - #4046", "[Fixed] History omits latest commit from list - #5243" ], "1.3.0-beta4": [ "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069" ], "1.3.0-beta3": [ "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0-beta2": [ "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158" ], "1.2.7-test3": ["Test deployment for electron version bump."], "1.3.0-beta1": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes count and ahead/behind information - #2259", "[Added] Syntax highlighting for PowerShell files- #5081. Thanks @say25!", "[Fixed] Display something when repository is located at drive root - #4924", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Improved] Repository list badge style tweaks and tweaks for dark theme - #5095", "[Improved] Change primary button color to blue for dark theme - #5074" ], "1.2.7-test2": ["Test deployment for electron version bump."], "1.2.7-test1": ["Sanity check deployment for refactored scripts"], "1.2.7-beta0": [ "[Fixed] Visual indicator for upcoming feature should not be shown - #5026" ], "1.2.6": [ "[Fixed] Visual indicator for upcoming feature should not be shown - #5026" ], "1.2.6-beta0": [ "[Fixed] Feature flag for upcoming feature not applied correctly - #5024" ], "1.2.5": [ "[Fixed] Feature flag for upcoming feature not applied correctly - #5024" ], "1.2.4": [ "[New] Dark Theme preview - #4849", "[Added] Syntax highlighting for Cake files - #4935. Thanks @say25!", "[Added] WebStorm support for macOS - #4841. Thanks @mrsimonfletcher!", "[Fixed] Compare tab appends older commits when scrolling to bottom of list - #4964", "[Fixed] Remove temporary directory after Git LFS operation completes - #4414", "[Fixed] Unable to compare when two branches exist - #4947 #4730", "[Fixed] Unhandled errors when refreshing pull requests fails - #4844 #4866", "[Improved] Remove context menu needs to hint if a dialog will be shown - #4975", "[Improved] Upgrade embedded Git LFS - #4602 #4745", "[Improved] Update banner message clarifies that only Desktop needs to be restarted - #4891. Thanks @KennethSweezy!", "[Improved] Discard Changes context menu entry should contain ellipses when user needs to confirm - #4846. Thanks @yongdamsh!", "[Improved] Initializing syntax highlighting components - #4764", "[Improved] Only show overflow shadow when description overflows - #4898", "[Improved] Changes tab displays number of changed files instead of dot - #4772. Thanks @yongdamsh!" ], "1.2.4-beta5": [], "1.2.4-beta4": [ "[Fixed] Compare tab appends older commits when scrolling to bottom of list - #4964", "[Fixed] Remove temporary directory after Git LFS operation completes - #4414", "[Improved] Remove context menu needs to hint if a dialog will be shown - #4975", "[Improved] Upgrade embedded Git LFS - #4602 #4745" ], "1.2.4-test1": [ "Confirming latest Git LFS version addresses reported issues" ], "1.2.4-beta3": [ "[Added] WebStorm support for macOS - #4841. Thanks @mrsimonfletcher!", "[Improved] Update banner message clarifies that only Desktop needs to be restarted - #4891. Thanks @KennethSweezy!" ], "1.2.4-beta2": [], "1.2.4-beta1": [ "[New] Dark Theme preview - #4849", "[Added] Syntax highlighting for Cake files - #4935. Thanks @say25!", "[Fixed] Unable to compare when two branches exist - #4947 #4730", "[Fixed] Unhandled errors when refreshing pull requests fails - #4844 #4866", "[Improved] Discard Changes context menu entry should contain ellipses when user needs to confirm - #4846. Thanks @yongdamsh!", "[Improved] Initializing syntax highlighting components - #4764", "[Improved] Only show overflow shadow when description overflows - #4898", "[Improved] Changes tab displays number of changed files instead of dot - #4772. Thanks @yongdamsh!" ], "1.2.3": [ "[Fixed] No autocomplete when searching for co-authors - #4847", "[Fixed] Error when checking out a PR from a fork - #4842" ], "1.2.3-beta1": [ "[Fixed] No autocomplete when searching for co-authors - #4847", "[Fixed] Error when checking out a PR from a fork - #4842" ], "1.2.3-test1": [ "Confirming switch from uglify-es to babel-minify addresses minification issue - #4871" ], "1.2.2": [ "[Fixed] Make cURL/schannel default to using the Windows certificate store - #4817", "[Fixed] Restore text selection highlighting in diffs - #4818" ], "1.2.2-beta1": [ "[Fixed] Make cURL/schannel default to using the Windows certificate store - #4817", "[Fixed] Text selection highlighting in diffs is back - #4818" ], "1.2.1": [ "[Added] Brackets support for macOS - #4608. Thanks @3raxton!", "[Added] Pull request number and author are included in fuzzy-find filtering - #4653. Thanks @damaneice!", "[Fixed] Decreased the max line length limit - #3740. Thanks @sagaragarwal94!", "[Fixed] Updated embedded Git to 2.17.1 to address upstream security issue - #4791", "[Improved] Display the difference in file size of an image in the diff view - #4380. Thanks @ggajos!" ], "1.2.1-test1": ["Upgraded embedded Git to 2.17.0"], "1.2.1-beta1": [ "[Added] Brackets support for macOS - #4608. Thanks @3raxton!", "[Added] Pull request number and author are included in fuzzy-find filtering - #4653. Thanks @damaneice!", "[Fixed] Decreased the max line length limit - #3740. Thanks @sagaragarwal94!", "[Fixed] Updated embedded Git to 2.17.1 to address upstream security issue - #4791", "[Improved] Display the difference in file size of an image in the diff view - #4380. Thanks @ggajos!" ], "1.2.1-beta0": [], "1.1.2-test6": ["Testing the Webpack v4 output from the project"], "1.2.0": [ "[New] History now has ability to compare to another branch and merge outstanding commits", "[New] Support for selecting more than one file in the changes list - #1712. Thanks @icosamuel!", "[New] Render bitmap images in diffs - #4367. Thanks @MagicMarvMan!", "[Added] Add PowerShell Core support for Windows and macOS - #3791. Thanks @saschanaz!", "[Added] Add MacVim support for macOS - #4532. Thanks @johnelliott!", "[Added] Syntax highlighting for JavaServer Pages (JSP) - #4470. Thanks @damaneice!", "[Added] Syntax highlighting for Haxe files - #4445. Thanks @Gama11!", "[Added] Syntax highlighting for R files - #4455. Thanks @say25!", "[Fixed] 'Open in Shell' on Linux ensures Git is on PATH - #4619. Thanks @ziggy42!", "[Fixed] Pressing 'Enter' on filtered Pull Request does not checkout - #4673", "[Fixed] Alert icon shrinks in rename dialog when branch name is long - #4566", "[Fixed] 'Open in Desktop' performs fetch to ensure branch exists before checkout - #3006", "[Fixed] 'Open in Default Program' on Windows changes the window title - #4446", "[Fixed] Skip fast-forwarding when there are many eligible local branches - #4392", "[Fixed] Image diffs not working for files with upper-case file extension - #4466", "[Fixed] Syntax highlighting not working for files with upper-case file extension - #4462. Thanks @say25!", "[Fixed] Error when creating Git LFS progress causes clone to fail - #4307. Thanks @MagicMarvMan!", "[Fixed] 'Open File in External Editor' always opens a new instance - #4381", "[Fixed] 'Select All' shortcut now works for changes list - #3821", "[Improved] Automatically add valid repository when using command line interface - #4513. Thanks @ggajos!", "[Improved] Always fast-forward the default branch - #4506", "[Improved] Warn when trying to rename a published branch - #4035. Thanks @agisilaos!", "[Improved] Added context menu for files in commit history - #2845. Thanks @crea7or", "[Improved] Discarding all changes always prompts for confirmation - #4459", "[Improved] Getting list of changed files is now more efficient when dealing with thousands of files - #4443", "[Improved] Checking out a Pull Request may skip unnecessary fetch - #4068. Thanks @agisilaos!", "[Improved] Commit summary now has a hint to indicate why committing is disabled - #4429.", "[Improved] Pull request status text now matches format on GitHub - #3521", "[Improved] Add escape hatch to disable hardware acceleration when launching - #3921" ], "1.1.2-beta7": [], "1.1.2-beta6": [ "[Added] Add MacVim support for macOS - #4532. Thanks @johnelliott!", "[Fixed] Open in Shell on Linux ensures Git is available on the user's PATH - #4619. Thanks @ziggy42!", "[Fixed] Keyboard focus issues when navigating Pull Request list - #4673", "[Improved] Automatically add valid repository when using command line interface - #4513. Thanks @ggajos!" ], "1.1.2-test5": ["Actually upgrading fs-extra to v6 in the app"], "1.1.2-test4": ["Upgrading fs-extra to v6"], "1.1.2-beta5": [ "[Added] Syntax highlighting for JavaServer Pages (JSP) - #4470. Thanks @damaneice!", "[Fixed] Prevent icon from shrinking in rename dialog - #4566" ], "1.1.2-beta4": [ "[New] New Compare tab allowing visualization of the relationship between branches", "[New] Support for selecting more than one file in the changes list - #1712. Thanks @icosamuel!", "[Fixed] 'Select All' shortcut now works for changes list - #3821", "[Improved] Always fast-forward the default branch - #4506", "[Improved] Warn when trying to rename a published branch - #4035. Thanks @agisilaos!", "[Improved] Added context menu for files in commit history - #2845. Thanks @crea7or", "[Improved] Discarding all changes always prompts for confirmation - #4459" ], "1.1.2-beta3": [ "[Added] Syntax highlighting for Haxe files - #4445. Thanks @Gama11!", "[Added] Syntax highlighting for R files - #4455. Thanks @say25!", "[Fixed] Fetch to ensure \"Open in Desktop\" has a branch to checkout - #3006", "[Fixed] Handle the click event when opening a binary file - #4446", "[Fixed] Skip fast-forwarding when there are a lot of eligible local branches - #4392", "[Fixed] Image diffs not working for files with upper-case file extension - #4466", "[Fixed] Syntax highlighting not working for files with upper-case file extension - #4462. Thanks @say25!", "[Improved] Getting list of changed files is now more efficient when dealing with thousands of files - #4443", "[Improved] Checking out a Pull Request may skip unnecessary fetch - #4068. Thanks @agisilaos!", "[Improved] Commit summary now has a hint to indicate why committing is disabled - #4429." ], "1.1.2-test3": ["[New] Comparison Branch demo build"], "1.1.2-test2": [ "Refactoring the diff internals to potentially land some SVG improvements" ], "1.1.2-test1": [ "Refactoring the diff internals to potentially land some SVG improvements" ], "1.1.2-beta2": [ "[New] Render bitmap images in diffs - #4367. Thanks @MagicMarvMan!", "[New] Add PowerShell Core support for Windows and macOS - #3791. Thanks @saschanaz!", "[Fixed] Error when creating Git LFS progress causes clone to fail - #4307. Thanks @MagicMarvMan!", "[Fixed] 'Open File in External Editor' does not use existing window - #4381", "[Fixed] Always ask for confirmation when discarding all changes - #4423", "[Improved] Pull request status text now matches format on GitHub - #3521", "[Improved] Add escape hatch to disable hardware acceleration when launching - #3921" ], "1.1.2-beta1": [], "1.1.1": [ "[New] Render WebP images in diffs - #4164. Thanks @agisilaos!", "[Fixed] Edit context menus in commit form input elements - #3886", "[Fixed] Escape behavior for Pull Request list does not match Branch List - #3597", "[Fixed] Keep caret position after inserting completion for emoji/mention - #3835. Thanks @CarlRosell!", "[Fixed] Handle error events when watching files used to get Git LFS output - #4117", "[Fixed] Potential race condition when opening a fork pull request - #4149", "[Fixed] Show placeholder image when no pull requests found - #3973", "[Fixed] Disable commit summary and description inputs while commit in progress - #3893. Thanks @crea7or!", "[Fixed] Ensure pull request cache is cleared after last pull request merged - #4122", "[Fixed] Focus two-factor authentication dialog on input - #4220. Thanks @WaleedAshraf!", "[Fixed] Branches button no longer disabled while on an unborn branch - #4236. Thanks @agisilaos!", "[Fixed] Delete gitignore file when all entries cleared in Repository Settings - #1896", "[Fixed] Add visual indicator that a folder can be dropped on Desktop - #4004. Thanks @agisilaos!", "[Fixed] Attempt to focus the application window on macOS after signing in via the browser - #4126", "[Fixed] Refresh issues when user manually fetches - #4076", "[Improved] Add `Discard All Changes...` to context menu on changed file list - #4197. Thanks @xamm!", "[Improved] Improve contrast for button labels in app toolbar - #4219", "[Improved] Speed up check for submodules when discarding - #4186. Thanks @kmscode!", "[Improved] Make the keychain known issue more clear within Desktop - #4125", "[Improved] Continue past the 'diff too large' message and view the diff - #4050", "[Improved] Repository association might not have expected prefix - #4090. Thanks @mathieudutour!", "[Improved] Add message to gitignore dialog when not on default branch - #3720", "[Improved] Hide Desktop-specific forks in Branch List - #4127", "[Improved] Disregard accidental whitespace when cloning a repository by URL - #4216", "[Improved] Show alert icon in repository list when repository not found on disk - #4254. Thanks @gingerbeardman!", "[Improved] Repository list now closes after removing last repository - #4269. Thanks @agisilaos!", "[Improved] Move forget password link after the password dialog to match expected tab order - #4283. Thanks @iamnapo!", "[Improved] More descriptive text in repository toolbar button when no repositories are tracked - #4268. Thanks @agisilaos!", "[Improved] Context menu in Changes tab now supports opening file in your preferred editor - #4030" ], "1.1.1-beta4": [ "[Improved] Context menu in Changes tab now supports opening file in your preferred editor - #4030" ], "1.1.1-beta3": [], "1.1.1-beta2": [ "[New] Render WebP images in diffs - #4164. Thanks @agisilaos!", "[Fixed] Edit context menus in commit form input elements - #3886", "[Fixed] Escape behavior should match that of Branch List - #3972", "[Fixed] Keep caret position after inserting completion - #3835. Thanks @CarlRosell!", "[Fixed] Handle error events when watching files used to get Git LFS output - #4117", "[Fixed] Potential race condition when opening a fork pull request - #4149", "[Fixed] Show placeholder image when no pull requests found - #3973", "[Fixed] Disable input fields summary and description while commit in progress - #3893. Thanks @crea7or!", "[Fixed] Ensure pull request cache is cleared after last pull request merged - #4122", "[Fixed] Focus two-factor authentication dialog on input - #4220. Thanks @WaleedAshraf!", "[Fixed] Branches button no longer disabled while on an unborn branch - #4236. Thanks @agisilaos!", "[Fixed] Delete gitignore file when entries cleared in Repository Settings - #1896", "[Fixed] Add visual indicator that a folder can be dropped on Desktop - #4004. Thanks @agisilaos!", "[Improved] Add `Discard All Changes...` to context menu on changed file list - #4197. Thanks @xamm!", "[Improved] Improve contrast for button labels in app toolbar - #4219", "[Improved] Speed up check for submodules when discarding - #4186. Thanks @kmscode!", "[Improved] Make the keychain known issue more clear within Desktop - #4125", "[Improved] Continue past the 'diff too large' message and view the diff - #4050", "[Improved] Repository association might not have expected prefix - #4090. Thanks @mathieudutour!", "[Improved] Add message to gitignore dialog when not on default branch - #3720", "[Improved] Hide Desktop-specific forks in Branch List - #4127", "[Improved] Disregard accidental whitespace when cloning a repository by URL - #4216", "[Improved] Show alert icon in repository list when repository not found on disk - #4254. Thanks @gingerbeardman!", "[Improved] Repository list now closes after removing last repository - #4269. Thanks @agisilaos!", "[Improved] Move forget password link to after the password dialog to maintain expected tab order - #4283. Thanks @iamnapo!", "[Improved] More descriptive text in repository toolbar button when no repositories are tracked - #4268. Thanks @agisilaos!" ], "1.1.1-test2": ["[Improved] Electron 1.8.3 upgrade (again)"], "1.1.1-test1": [ "[Improved] Forcing a focus on the window after the OAuth dance is done" ], "1.1.1-beta1": [], "1.1.0": [ "[New] Check out pull requests from collaborators or forks from within Desktop", "[New] View the commit status of the branch when it has an open pull request", "[Added] Add RubyMine support for macOS - #3883. Thanks @gssbzn!", "[Added] Add TextMate support for macOS - #3910. Thanks @caiofbpa!", "[Added] Syntax highlighting for Elixir files - #3774. Thanks @joaovitoras!", "[Fixed] Update layout of branch blankslate image - #4011", "[Fixed] Expanded avatar stack in commit summary gets cut off - #3884", "[Fixed] Clear repository filter when switching tabs - #3787. Thanks @reyronald!", "[Fixed] Avoid crash when unable to launch shell - #3954", "[Fixed] Ensure renames are detected when viewing commit diffs - #3673", "[Fixed] Fetch default remote if it differs from the current - #4056", "[Fixed] Handle Git errors when .gitmodules are malformed - #3912", "[Fixed] Handle error when \"where\" is not on PATH - #3882 #3825", "[Fixed] Ignore action assumes CRLF when core.autocrlf is unset - #3514", "[Fixed] Prevent duplicate entries in co-author autocomplete list - #3887", "[Fixed] Renames not detected when viewing commit diffs - #3673", "[Fixed] Support legacy usernames as co-authors - #3897", "[Improved] Update branch button text from \"New\" to \"New Branch\" - #4032", "[Improved] Add fuzzy search in the repository, branch, PR, and clone FilterLists - #911. Thanks @j-f1!", "[Improved] Tidy up commit summary and description layout in commit list - #3922. Thanks @willnode!", "[Improved] Use smaller default size when rendering Gravatar avatars - #3911", "[Improved] Show fetch progress when initializing remote for fork - #3953", "[Improved] Remove references to Hubot from the user setup page - #4015. Thanks @j-f1!", "[Improved] Error handling around ENOENT - #3954", "[Improved] Clear repository filter text when switching tabs - #3787. Thanks @reyronald!", "[Improved] Allow window to accept single click on focus - #3843", "[Improved] Disable drag-and-drop interaction when a popup is in the foreground - #3996" ], "1.1.0-beta3": [ "[Fixed] Fetch default remote if it differs from the current - #4056" ], "1.1.0-beta2": [ "[Improved] Update embedded Git to improve error handling when using stdin - #4058" ], "1.1.0-beta1": [ "[Improved] Add 'Branch' to 'New' branch button - #4032", "[Improved] Remove references to Hubot from the user setup page - #4015. Thanks @j-f1!" ], "1.0.14-beta5": [ "[Fixed] Improve detection of pull requests associated with current branch - #3991", "[Fixed] Disable drag-and-drop interaction when a popup is in the foreground - #3996", "[Fixed] Branch blank slate image out of position - #4011" ], "1.0.14-beta4": [ "[New] Syntax highlighting for Elixir files - #3774. Thanks @joaovitoras!", "[Fixed] Crash when unable to launch shell - #3954", "[Fixed] Support legacy usernames as co-authors - #3897", "[Improved] Enable fuzzy search in the repository, branch, PR, and clone FilterLists - #911. Thanks @j-f1!", "[Improved] Tidy up commit summary and description layout in commit list - #3922. Thanks @willnode!" ], "1.0.14-test1": ["[Improved] Electron 1.8.2 upgrade"], "1.0.14-beta3": [ "[Added] Add TextMate support for macOS - #3910. Thanks @caiofbpa!", "[Fixed] Handle Git errors when .gitmodules are malformed - #3912", "[Fixed] Clear repository filter when switching tabs - #3787. Thanks @reyronald!", "[Fixed] Prevent duplicate entries in co-author autocomplete list - #3887", "[Improved] Show progress when initializing remote for fork - #3953" ], "1.0.14-beta2": [ "[Added] Add RubyMine support for macOS - #3883. Thanks @gssbzn!", "[Fixed] Allow window to accept single click on focus - #3843", "[Fixed] Expanded avatar list hidden behind commit details - #3884", "[Fixed] Renames not detected when viewing commit diffs - #3673", "[Fixed] Ignore action assumes CRLF when core.autocrlf is unset - #3514", "[Improved] Use smaller default size when rendering Gravatar avatars - #3911" ], "1.0.14-beta1": ["[New] Commit together with co-authors - #3879"], "1.0.13": [ "[New] Commit together with co-authors - #3879", "[New] PhpStorm is now a supported external editor on macOS - #3749. Thanks @hubgit!", "[Improved] Update embedded Git to 2.16.1 - #3617 #3828 #3871", "[Improved] Blank slate view is now more responsive when zoomed - #3777", "[Improved] Documentation fix for Open in Shell resource - #3799. Thanks @saschanaz!", "[Improved] Improved error handling for Linux - #3732", "[Improved] Allow links in unexpanded summary to be clickable - #3719. Thanks @koenpunt!", "[Fixed] Update Electron to 1.7.11 to address security issue - #3846", "[Fixed] Allow double dashes in branch name - #3599. Thanks @JQuinnie!", "[Fixed] Sort the organization list - #3657. Thanks @j-f1!", "[Fixed] Check out PRs from a fork - #3395", "[Fixed] Confirm deleting branch when it has an open PR - #3615", "[Fixed] Defer user/email validation in Preferences - #3722", "[Fixed] Checkout progress did not include branch name - #3780", "[Fixed] Don't block branch switching when in detached HEAD - #3807", "[Fixed] Handle discarding submodule changes properly - #3647", "[Fixed] Show tooltip with additional info about the build status - #3134", "[Fixed] Update placeholders to support Linux distributions - #3150", "[Fixed] Refresh local commit list when switching tabs - #3698" ], "1.0.13-test1": [ "[Improved] Update embedded Git to 2.16.1 - #3617 #3828 #3871", "[Fixed] Update Electron to 1.7.11 to address security issue - #3846", "[Fixed] Allows double dashes in branch name - #3599. Thanks @JQuinnie!", "[Fixed] Pull Request store may not have status defined - #3869", "[Fixed] Render the Pull Request badge when no commit statuses found - #3608" ], "1.0.13-beta1": [ "[New] PhpStorm is now a supported external editor on macOS - #3749. Thanks @hubgit!", "[Improved] Blank slate view is now more responsive when zoomed - #3777", "[Improved] Documentation fix for Open in Shell resource - #3799. Thanks @saschanaz!", "[Improved] Improved error handling for Linux - #3732", "[Improved] Allow links in unexpanded summary to be clickable - #3719. Thanks @koenpunt!", "[Fixed] Sort the organization list - #3657. Thanks @j-f1!", "[Fixed] Check out PRs from a fork - #3395", "[Fixed] Confirm deleting branch when it has an open PR - #3615", "[Fixed] Defer user/email validation in Preferences - #3722", "[Fixed] Checkout progress did not include branch name - #3780", "[Fixed] Don't block branch switching when in detached HEAD - #3807", "[Fixed] Handle discarding submodule changes properly - #3647", "[Fixed] Show tooltip with additional info about the build status - #3134", "[Fixed] Update placeholders to support Linux distributions - #3150", "[Fixed] Refresh local commit list when switching tabs - #3698" ], "1.0.12": [ "[New] Syntax highlighting for Rust files - #3666. Thanks @subnomo!", "[New] Syntax highlighting for Clojure cljc, cljs, and edn files - #3610. Thanks @mtkp!", "[Improved] Prevent creating a branch in the middle of a merge - #3733", "[Improved] Truncate long repo names in panes and modals to fit into a single line - #3598. Thanks @http-request!", "[Improved] Keyboard navigation support in pull request list - #3607", "[Fixed] Inconsistent caret behavior in text boxes when using certain keyboard layouts - #3354", "[Fixed] Only render the organizations list when it has orgs - #1414", "[Fixed] Checkout now handles situations where a ref exists on multiple remotes - #3281", "[Fixed] Retain accounts on desktop when losing connectivity - #3641", "[Fixed] Missing argument in FullScreenInfo that could prevent app from launching - #3727. Thanks @OiYouYeahYou!" ], "1.0.12-beta1": [ "[New] Syntax highlighting for Rust files - #3666. Thanks @subnomo!", "[New] Syntax highlighting for Clojure cljc, cljs, and edn files - #3610. Thanks @mtkp!", "[Improved] Prevent creating a branch in the middle of a merge - #3733", "[Improved] Truncate long repo names in panes and modals to fit into a single line - #3598. Thanks @http-request!", "[Improved] Keyboard navigation support in pull request list - #3607", "[Fixed] Inconsistent caret behavior in text boxes when using certain keyboard layouts - #3354", "[Fixed] Only render the organizations list when it has orgs - #1414", "[Fixed] Checkout now handles situations where a ref exists on multiple remotes - #3281", "[Fixed] Retain accounts on desktop when losing connectivity - #3641", "[Fixed] Missing argument in FullScreenInfo that could prevent app from launching - #3727. Thanks @OiYouYeahYou!" ], "1.0.12-beta0": [ "[New] Highlight substring matches in the \"Branches\" and \"Repositories\" list when filtering - #910. Thanks @JordanMussi!", "[New] Add preview for ico files - #3531. Thanks @serhiivinichuk!", "[New] Fallback to Gravatar for loading avatars - #821", "[New] Provide syntax highlighting for Visual Studio project files - #3552. Thanks @saul!", "[New] Provide syntax highlighting for F# fsx and fsi files - #3544. Thanks @saul!", "[New] Provide syntax highlighting for Kotlin files - #3555. Thanks @ziggy42!", "[New] Provide syntax highlighting for Clojure - #3523. Thanks @mtkp!", "[Improved] Toggle the \"Repository List\" from the menu - #2638. Thanks @JordanMussi!", "[Improved] Prevent saving of disallowed character strings for your name and email - #3204", "[Improved] Error messages now appear at the top of the \"Create a New Repository\" dialog - #3571. Thanks @http-request!", "[Improved] \"Repository List\" header is now \"Github.com\" for consistency - #3567. Thanks @iFun!", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] Fix ordering of commit history when your branch and tracking branch have both changed - #2737", "[Fixed] Prevent creating a branch that starts with a period - #3013. Thanks @JordanMussi!", "[Fixed] Branch names are properly encoded when creating a pull request - #3509", "[Fixed] Re-enable all the menu items after closing a popup - #3533", "[Fixed] Removes option to delete remote branch after it's been deleted - #2964. Thanks @JordanMussi!", "[Fixed] Windows: Detects available editors and shells now works even when the group policy blocks write registry access - #3105 #3405", "[Fixed] Windows: Menu items are no longer truncated - #3547", "[Fixed] Windows: Prevent disabled menu items from being accessed - #3391 #1521", "[Fixed] Preserve the selected pull request when a manual fetch is done - #3524", "[Fixed] Update pull request badge after switching branches or pull requests - #3454", "[Fixed] Restore keyboard arrow navigation for pull request list - #3499" ], "1.0.11": [ "[New] Highlight substring matches in the \"Branches\" and \"Repositories\" list when filtering - #910. Thanks @JordanMussi!", "[New] Add preview for ico files - #3531. Thanks @serhiivinichuk!", "[New] Fallback to Gravatar for loading avatars - #821", "[New] Provide syntax highlighting for Visual Studio project files - #3552. Thanks @saul!", "[New] Provide syntax highlighting for F# fsx and fsi files - #3544. Thanks @saul!", "[New] Provide syntax highlighting for Kotlin files - #3555. Thanks @ziggy42!", "[New] Provide syntax highlighting for Clojure - #3523. Thanks @mtkp!", "[Improved] Toggle the \"Repository List\" from the menu - #2638. Thanks @JordanMussi!", "[Improved] Prevent saving of disallowed character strings for your name and email - #3204", "[Improved] Error messages now appear at the top of the \"Create a New Repository\" dialog - #3571. Thanks @http-request!", "[Improved] \"Repository List\" header is now \"Github.com\" for consistency - #3567. Thanks @iFun!", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] Fix ordering of commit history when your branch and tracking branch have both changed - #2737", "[Fixed] Prevent creating a branch that starts with a period - #3013. Thanks @JordanMussi!", "[Fixed] Branch names are properly encoded when creating a pull request - #3509", "[Fixed] Re-enable all the menu items after closing a popup - #3533", "[Fixed] Removes option to delete remote branch after it's been deleted - #2964. Thanks @JordanMussi!", "[Fixed] Windows: Detects available editors and shells now works even when the group policy blocks write registry access - #3105 #3405", "[Fixed] Windows: Menu items are no longer truncated - #3547", "[Fixed] Windows: Prevent disabled menu items from being accessed - #3391 #1521" ], "1.0.11-test0": [ "[Improved] now with a new major version of electron-packager" ], "1.0.11-beta0": [ "[Improved] Refresh the pull requests list after fetching - #3503", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] URL encode branch names when creating a pull request - #3509", "[Fixed] Windows: detecting available editors and shells now works even when the group policy blocks write registry access - #3105 #3405" ], "1.0.10": [ "[New] ColdFusion Builder is now a supported external editor - #3336 #3321. Thanks @AtomicCons!", "[New] VSCode Insiders build is now a supported external editor - #3441. Thanks @say25!", "[New] BBEdit is now a supported external editor - #3467. Thanks @NiklasBr!", "[New] Hyper is now a supported shell on Windows too - #3455. Thanks @JordanMussi!", "[New] Swift is now syntax highlighted - #3305. Thanks @agisilaos!", "[New] Vue.js is now syntax highlighted - #3368. Thanks @wanecek!", "[New] CoffeeScript is now syntax highlighted - #3356. Thanks @agisilaos!", "[New] Cypher is now syntax highlighted - #3440. Thanks @say25!", "[New] .hpp is now syntax highlighted as C++ - #3420. Thanks @say25!", "[New] ML-like languages are now syntax highlighted - #3401. Thanks @say25!", "[New] Objective-C is now syntax highlighted - #3355. Thanks @koenpunt!", "[New] SQL is now syntax highlighted - #3389. Thanks @say25!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Improved] Avoid excessive background fetching when switching repositories - #3329", "[Improved] Ignore menu events sent when a modal is shown - #3308", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268", "[Fixed] Windows: Removed the title attribute on the Windows buttons so that they no longer leave their tooltips hanging around - #3348. Thanks @j-f1!", "[Fixed] Windows: Detect VS Code when installed to non-standard locations - #3304", "[Fixed] Hitting Return would select the first item in a filter list when the filter text was empty - #3447", "[Fixed] Add some missing keyboard shortcuts - #3327. Thanks @say25!", "[Fixed] Handle \"304 Not Modified\" responses - #3399", "[Fixed] Don't overwrite an existing .gitattributes when creating a new repository - #3419. Thanks @strafe!" ], "1.0.10-beta3": [ "[New] Change \"Create Pull Request\" to \"Show Pull Request\" when there is already a pull request open for the branch - #2524", "[New] VSCode Insiders build is now a supported external editor - #3441. Thanks @say25!", "[New] BBEdit is now a supported external editor - #3467. Thanks @NiklasBr!", "[New] Hyper is now a supported shell - #3455. Thanks @JordanMussi!", "[New] Cypher is now syntax highlighted - #3440. Thanks @say25!", "[New] .hpp is now syntax highlighted as C++ - #3420. Thanks @say25!", "[New] ML-like languages are now syntax highlighted - #3401. Thanks @say25!", "[Improved] Use the same colors in pull request dropdown as we use on GitHub.com - #3451", "[Improved] Fancy pull request loading animations - #2868", "[Improved] Avoid excessive background fetching when switching repositories - #3329", "[Improved] Refresh the pull request list when the Push/Pull/Fetch button is clicked - #3448", "[Improved] Ignore menu events sent when a modal is shown - #3308", "[Fixed] Hitting Return would select the first item in a filter list when the filter text was empty - #3447", "[Fixed] Add some missing keyboard shortcuts - #3327. Thanks @say25!", "[Fixed] Handle \"304 Not Modified\" responses - #3399", "[Fixed] Don't overwrite an existing .gitattributes when creating a new repository - #3419. Thanks @strafe!" ], "1.0.10-beta2": [ "[New] SQL is now syntax highlighted! - #3389. Thanks @say25!", "[Fixed] Windows: Detect VS Code when installed to non-standard locations - #3304" ], "1.0.10-beta1": [ "[New] Vue.js code is now syntax highlighted! - #3368. Thanks @wanecek!", "[New] CoffeeScript is now syntax highlighted! - #3356. Thanks @agisilaos!", "[New] Highlight .m as Objective-C - #3355. Thanks @koenpunt!", "[Improved] Use smarter middle truncation for branch names - #3357", "[Fixed] Windows: Removed the title attribute on the Windows buttons so that they no longer leave their tooltips hanging around - #3348. Thanks @j-f1!" ], "1.0.10-beta0": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9-beta1": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9-beta0": [ "[Fixed] Crash when rendering diffs for certain types of files - #3249", "[Fixed] Continually being prompted to add the upstream remote, even when it already exists - #3252" ], "1.0.8": [ "[Fixed] Crash when rendering diffs for certain types of files - #3249", "[Fixed] Continually being prompted to add the upstream remote, even when it already exists - #3252" ], "1.0.8-beta0": [ "[New] Syntax highlighted diffs - #3101", "[New] Add upstream to forked repositories - #2364", "[Fixed] Only reset scale of title bar on macOS - #3193", "[Fixed] Filter symbolic refs in the branch list - #3196", "[Fixed] Address path issue with invoking Git Bash - #3186", "[Fixed] Update embedded Git to support repository hooks and better error messages - #3067 #3079", "[Fixed] Provide credentials to LFS repositories when performing checkout - #3167", "[Fixed] Assorted changelog typos - #3174 #3184 #3207. Thanks @strafe, @alanaasmaa and @jt2k!" ], "1.0.7": [ "[New] Syntax highlighted diffs - #3101", "[New] Add upstream to forked repositories - #2364", "[Fixed] Only reset scale of title bar on macOS - #3193", "[Fixed] Filter symbolic refs in the branch list - #3196", "[Fixed] Address path issue with invoking Git Bash - #3186", "[Fixed] Update embedded Git to support repository hooks and better error messages - #3067 #3079", "[Fixed] Provide credentials to LFS repositories when performing checkout - #3167", "[Fixed] Assorted changelog typos - #3174 #3184 #3207. Thanks @strafe, @alanaasmaa and @jt2k!" ], "1.0.7-beta0": [ "[Fixed] The Branches list wouldn't display the branches for non-GitHub repositories - #3169", "[Fixed] Pushing or pulling could error when the temp directory was unavailable - #3046" ], "1.0.6": [ "[Fixed] The Branches list wouldn't display the branches for non-GitHub repositories - #3169", "[Fixed] Pushing or pulling could error when the temp directory was unavailable - #3046" ], "1.0.5": [ "[New] The command line interface now provides some helpful help! - #2372. Thanks @j-f1!", "[New] Create new branches from the Branches foldout - #2784", "[New] Add support for VSCode Insiders - #3012 #3062. Thanks @MSathieu!", "[New] Linux: Add Atom and Sublime Text support - #3133. Thanks @ziggy42!", "[New] Linux: Tilix support - #3117. Thanks @ziggy42!", "[New] Linux: Add Visual Studio Code support - #3122. Thanks @ziggy42!", "[Improved] Report errors when a problem occurs storing tokens - #3159", "[Improved] Bump to Git 2.14.3 - #3146", "[Improved] Don't try to display diffs that could cause the app to hang - #2596", "[Fixed] Handle local user accounts with URL-hostile characters - #3107", "[Fixed] Cloning a repository which uses Git LFS would leave all the files appearing modified - #3146", "[Fixed] Signing in in the Welcome flow could hang - #2769", "[Fixed] Properly replace old Git LFS configuration values - #2984" ], "1.0.5-beta1": [ "[New] Create new branches from the Branches foldout - #2784", "[New] Add support for VSCode Insiders - #3012 #3062. Thanks @MSathieu!", "[New] Linux: Add Atom and Sublime Text support - #3133. Thanks @ziggy42!", "[New] Linux: Tilix support - #3117. Thanks @ziggy42!", "[New] Linux: Add Visual Studio Code support - #3122. Thanks @ziggy42!", "[Improved] Report errors when a problem occurs storing tokens - #3159", "[Improved] Bump to Git 2.14.3 - #3146", "[Improved] Don't try to display diffs that could cause the app to hang - #2596", "[Fixed] Handle local user accounts with URL-hostile characters - #3107", "[Fixed] Cloning a repository which uses Git LFS would leave all the files appearing modified - #3146", "[Fixed] Signing in in the Welcome flow could hang - #2769", "[Fixed] Properly replace old Git LFS configuration values - #2984" ], "1.0.5-test1": [], "1.0.5-test0": [], "1.0.5-beta0": [ "[New] The command line interface now provides some helpful help! - #2372. Thanks @j-f1!" ], "1.0.4": [ "[New] Report Git LFS progress when cloning, pushing, pulling, or reverting - #2226", "[Improved] Increased diff contrast and and line gutter selection - #2586 #2181", "[Improved] Clarify why publishing a branch is disabled in various scenarios - #2773", "[Improved] Improved error message when installing the command Line tool fails - #2979. Thanks @agisilaos!", "[Improved] Format the branch name in \"Create Branch\" like we format branch names elsewhere - #2977. Thanks @j-f1!", "[Fixed] Avatars not updating after signing in - #2911", "[Fixed] Lots of bugs if there was a file named \"HEAD\" in the repository - #3009 #2721 #2938", "[Fixed] Handle duplicate config values when saving user.name and user.email - #2945", "[Fixed] The \"Create without pushing\" button when creating a new pull request wouldn't actually do anything - #2917" ], "1.0.4-beta1": [ "[New] Report Git LFS progress when cloning, pushing, pulling, or reverting - #2226", "[Improved] Increased diff contrast and and line gutter selection - #2586 #2181", "[Improved] Clarify why publishing a branch is disabled in various scenarios - #2773", "[Improved] Improved error message when installing the command Line tool fails - #2979. Thanks @agisilaos!", "[Improved] Format the branch name in \"Create Branch\" like we format branch names elsewhere - #2977. Thanks @j-f1!", "[Fixed] Avatars not updating after signing in - #2911", "[Fixed] Lots of bugs if there was a file named \"HEAD\" in the repository - #3009 #2721 #2938", "[Fixed] Handle duplicate config values when saving user.name and user.email - #2945", "[Fixed] The \"Create without pushing\" button when creating a new pull request wouldn't actually do anything - #2917 #2917" ], "1.0.4-beta0": [ "[Improved] Increase the contrast of the modified file status octicons - #2914", "[Fixed] Showing changed files in Finder/Explorer would open the file - #2909", "[Fixed] macOS: Fix app icon on High Sierra - #2915", "[Fixed] Cloning an empty repository would fail - #2897 #2906", "[Fixed] Catch logging exceptions - #2910" ], "1.0.3": [ "[Improved] Increase the contrast of the modified file status octicons - #2914", "[Fixed] Showing changed files in Finder/Explorer would open the file - #2909", "[Fixed] macOS: Fix app icon on High Sierra - #2915", "[Fixed] Cloning an empty repository would fail - #2897 #2906", "[Fixed] Catch logging exceptions - #2910" ], "1.0.2": [ "[Improved] Better message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Improved] Clone error message now suggests networking might be involved - #2872. Thanks @agisilaos!", "[Improved] Include push/pull progress information in the push/pull button tooltip - #2879", "[Improved] Allow publishing a brand new, empty repository - #2773", "[Improved] Make file paths in lists selectable - #2801. Thanks @artivilla!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712", "[Fixed] Use the initial path provided when creating a new repository - #2883", "[Fixed] Windows: Avoid long path limits when discarding changes - #2833", "[Fixed] Files would get deleted when undoing the first commit - #2764", "[Fixed] Find the repository root before adding it - #2832", "[Fixed] Display warning about an existing folder before cloning - #2777 #2830", "[Fixed] Show contents of directory when showing a repository from Show in Explorer/Finder instead of showing the parent - #2798" ], "1.0.2-beta1": [ "[Improved] Clone error message now suggests networking might be involved - #2872. Thanks @agisilaos!", "[Improved] Include push/pull progress information in the push/pull button tooltip - #2879", "[Improved] Allow publishing a brand new, empty repository - #2773", "[Improved] Make file paths in lists selectable - #2801. Thanks @artivilla!", "[Fixed] Use the initial path provided when creating a new repository - #2883", "[Fixed] Windows: Avoid long path limits when discarding changes - #2833", "[Fixed] Files would get deleted when undoing the first commit - #2764", "[Fixed] Find the repository root before adding it - #2832", "[Fixed] Display warning about an existing folder before cloning - #2777 #2830", "[Fixed] Show contents of directory when showing a repository from Show in Explorer/Finder instead of showing the parent - #2798" ], "1.0.2-beta0": [ "[Improved] Message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712" ], "1.0.1": [ "[Improved] Message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712" ], "1.0.1-beta0": [ "[Fixed] Use the loading/disabled state while publishing - #1995", "[Fixed] Lock down menu item states for unborn repositories - #2744 #2573", "[Fixed] Windows: Detecting the available shells and editors when using a language other than English - #2735" ], "1.0.0": [ "[Fixed] Use the loading/disabled state while publishing - #1995", "[Fixed] Lock down menu item states for unborn repositories - #2744 #2573", "[Fixed] Windows: Detecting the available shells and editors when using a language other than English - #2735" ], "1.0.0-beta3": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.9.1": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "1.0.0-beta2": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.9.0": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.8.2": [ "[New] Ask to install LFS filters when an LFS repository is added - #2227", "[New] Clone GitHub repositories tab - #57", "[New] Option to opt-out of confirming discarding changes - #2681", "[Fixed] Long commit summary truncation - #1742", "[Fixed] Ensure the repository list is always enabled - #2648", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Clicking the \"Cancel\" button on the Publish Branch dialog - #2646", "[Fixed] Windows: Don't rely on PATH for knowing where to find chcp - #2678", "[Fixed] Relocating a repository now actually does that - #2685", "[Fixed] Clicking autocompletes inserts them - #2674", "[Fixed] Use shift for shortcut chord instead of alt - #2607", "[Fixed] macOS: \"Open in Terminal\" works with repositories with spaces in their path - #2682" ], "1.0.0-beta1": [ "[New] Option to to opt-out of confirming discarding changes - #2681", "[Fixed] Windows: Don't rely on PATH for knowing where to find chcp - #2678", "[Fixed] Relocating a repository now actually does that - #2685", "[Fixed] Clicking autocompletes inserts them - #2674", "[Fixed] Use shift for shortcut chord instead of alt - #2607", "[Fixed] macOS: \"Open in Terminal\" works with repositories with spaces in their path - #2682" ], "1.0.0-beta0": [ "[New] Ask to install LFS filters when an LFS repository is added - #2227", "[New] Clone GitHub repositories tab - #57", "[Fixed] Long commit summary truncation - #1742", "[Fixed] Ensure the repository list is always enabled - #2648", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Clicking the \"Cancel\" button on the Publish Branch dialog - #2646" ], "0.8.1": [ "[New] 'Open in Shell' now supports multiple shells - #2473", "[New] Windows: Enable adding self-signed certificates - #2581", "[Improved] Enhanced image diffs - #2383", "[Improved] Line diffs - #2461", "[Improved] Octicons updated - #2495", "[Improved] Adds ability to close repository list using shortcut - #2532", "[Improved] Switch default buttons in the Publish Branch dialog - #2515", "[Improved] Bring back \"Contact Support\" - #1472", "[Improved] Persist repository filter text after closing repository list - #2571", "[Improved] Redesigned example commit in the Welcome flow - #2141", "[Improved] Tidy up initial \"external editor\" experience - #2551", "[Fixed] 'Include All' checkbox not in sync with partial selection - #2493", "[Fixed] Copied text from diff removed valid characters - #2499", "[Fixed] Click-focus on Windows would dismiss dialog - #2488", "[Fixed] Branch list not rendered in app - #2531", "[Fixed] Git operations checking certificate store - #2520", "[Fixed] Properly identify repositories whose remotes have a trailing slash - #2584", "[Fixed] Windows: Fix launching the `github` command line tool - #2563", "[Fixed] Use the primary email address if it's public - #2244", "[Fixed] Local branch not checked out after clone - #2561", "[Fixed] Only the most recent 30 issues would autocomplete for GitHub Enterprise repositories - #2541", "[Fixed] Missing \"View on GitHub\" menu item for non-Gitub repositories - #2615", "[Fixed] New tab opened when pressing \"]\" for certain keyboard layouts - #2607", "[Fixed] Windows: Crash when exiting full screen - #1502", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Ensure the repository list is always accessible - #2648" ], "0.8.1-beta4": [ "[Improved] Persist repository filter text after closing repository list - #2571", "[Improved] Redesigned example commit in the Welcome flow - #2141", "[Improved] Tidy up initial \"external editor\" experience - #2551", "[Fixed] Missing \"View on GitHub\" menu item for non-Gitub repositories - #2615", "[Fixed] New tab opened when pressing \"]\" for certain keyboard layouts - #2607", "[Fixed] Windows: Crash when exiting full screen - #1502" ], "0.8.1-beta3": [ "[New] Windows: Enable adding self-signed certificates - #2581", "[Improved] Adds ability to close repository list using shortcut - #2532", "[Improved] Switch default buttons in the Publish Branch dialog - #2515", "[Improved] Bring back \"Contact Support\" - #1472", "[Fixed] Properly identify repositories whose remotes have a trailing slash - #2584", "[Fixed] Windows: Fix launching the `github` command line tool - #2563", "[Fixed] Use the primary email address if it's public - #2244", "[Fixed] Local branch not checked out after clone - #2561", "[Fixed] Only the most recent 30 issues would autocomplete for GitHub Enterprise repositories - #2541" ], "0.8.1-beta2": [ "[Fixed] Branch list not rendered in app - #2531", "[Fixed] Git operations checking certificate store - #2520" ], "0.8.1-beta1": [ "[New] 'Open in Shell' now supports multiple shells - #2473", "[Improved] Enhanced image diffs - #2383", "[Improved] Line diffs - #2461", "[Improved] Octicons updated - #2495", "[Fixed] 'Include All' checkbox not in sync with partial selection - #2493", "[Fixed] Copied text from diff removed valid characters - #2499", "[Fixed] Click-focus on Windows would dismiss dialog - #2488" ], "0.8.1-beta0": [], "0.8.0": [ "[New] Added commit context menu - #2434", "[New] Added 'Open in External Editor' - #2009", "[New] Can choose whether a branch should be deleted on the remote as well as locally - #2136", "[New] Support authenticating with non-GitHub servers - #852", "[New] Added the ability to revert a commit - #752", "[New] Added a keyboard shortcut for opening the repository in the shell - #2138", "[Improved] Copied diff text no longer includes the line changetype markers - #1499", "[Improved] Fetch if a push fails because they need to pull first - #2431", "[Improved] Discard changes performance - #1889", "[Fixed] Show 'Add Repository' dialog when repository is dragged onto the app - #2442", "[Fixed] Dialog component did not remove event handler - #2469", "[Fixed] Open in External Editor context menu - #2475", "[Fixed] Update to Git 2.14.1 to fix security vulnerability - #2432", "[Fixed] Recent branches disappearing after renaming a branch - #2426", "[Fixed] Changing the default branch on GitHub.com is now reflected in the app - #1489", "[Fixed] Swap around some callouts for no repositories - #2447", "[Fixed] Darker unfocused selection color - #1669", "[Fixed] Increase the max sidebar width - #1588", "[Fixed] Don't say \"Publish this branch to GitHub\" for non-GitHub repositories - #1498", "[Fixed] macOS: Protocol schemes not getting registered - #2429", "[Fixed] Patches which contain the \"no newline\" marker would fail to apply - #2123", "[Fixed] Close the autocompletion popover when it loses focus - #2358", "[Fixed] Clear the selected org when switching Publish Repository tabs - #2386", "[Fixed] 'Create Without Pushing' button throwing an exception while opening a pull request - #2368", "[Fixed] Windows: Don't removing the running app out from under itself when there are updates pending - #2373", "[Fixed] Windows: Respect `core.autocrlf` and `core.safeclrf` when modifying the .gitignore - #1535", "[Fixed] Windows: Fix opening the app from the command line - #2396" ], "0.7.3-beta5": [], "0.7.3-beta4": [], "0.7.3-beta3": [], "0.7.3-beta2": [], "0.7.3-beta1": [], "0.7.3-beta0": [], "0.7.2": ["[Fixed] Issues with auto-updating to 0.7.1."], "0.7.2-beta0": [], "0.7.1": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Improved] Create Pull Request dialog shows more feedback while it's working - #2265", "[Improved] Version text is now copiable - #1935", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299", "[Fixed] Help menu items now work - #2314", "[Fixed] Windows: `github` command line tool not installing after updating - #2312", "[Fixed] Caret position jumping around while changing the path for adding a local repository - #2222", "[Fixed] Error dialogs being closed too easily - #2211", "[Fixed] Windows: Non-ASCII credentials were mangled - #189" ], "0.7.1-beta5": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Improved] Create Pull Request dialog shows more feedback while it's working - #2265", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299", "[Fixed] Help menu items now work - #2314", "[Fixed] Windows: `github` command line tool not installing after updating - #2312", "[Fixed] Caret position jumping around while changing the path for adding a local repository - #2222", "[Fixed] Error dialogs being closed too easily - #2211", "[Fixed] Windows: Non-ASCII credentials were mangled - #189" ], "0.7.1-beta4": [], "0.7.1-beta3": [], "0.7.1-beta2": [], "0.7.1-beta1": [], "0.7.1-beta0": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299" ], "0.7.0": [ "[New] Added the Branch > Create Pull Request menu item - #2135", "[New] Added the `github` command line tool - #696", "[Improved] Better error message when publishing a repository fails - #2089", "[Improved] Windows: Don't recreate the desktop shortcut if it's been deleted - #1759", "[Fixed] Cloning a repository's wiki - #1624", "[Fixed] Don't call GitHub Enterprise GitHub.com - #2094", "[Fixed] Don't push after publishing a new repository if the branch is unborn - #2086", "[Fixed] Don't close dialogs when clicking the title bar - #2056", "[Fixed] Windows: Clicking 'Show in Explorer' doesn't bring Explorer to the front - #2127", "[Fixed] Windows: Opening links doesn't bring the browser to the front - #1945", "[Fixed] macOS: Closing the window wouldn't exit fullscreen - #1901", "[Fixed] Scale blankslate images so they look nicer on high resolution displays - #1946", "[Fixed] Windows: Installer not completing or getting stuck in a loop - #1875 #1863", "[Fixed] Move the 'Forgot Password' link to fix the tab order of the sign in view - #2200" ], "0.6.3-beta7": [], "0.6.3-beta6": [], "0.6.3-beta5": [], "0.6.3-beta4": [], "0.6.3-beta3": [], "0.6.3-beta2": [], "0.6.3-beta1": [], "0.6.3-beta0": [], "0.6.2": [ "[New] Link to User Guides from the Help menu - #1963", "[New] Added the 'Open in External Editor' contextual menu item to changed files - #2023", "[New] Added the 'Show' and 'Open Command Prompt' contextual menu items to repositories - #1554", "[New] Windows: Support self-signed or untrusted certificates - #671", "[New] Copy the SHA to the clipboard when clicked - #1501", "[Improved] Provide the option of initializing a new repository when adding a directory that isn't already one - #969", "[Improved] Link to the working directory when there are no changes - #1871", "[Improved] Hitting Enter when selecting a base branch creates the new branch - #1780", "[Improved] Prefix repository names with their owner if they are ambiguous - #1848", "[Fixed] Sort and filter licenses like GitHub.com - #1987", "[Fixed] Long branch names not getting truncated in the Rename Branch dialog - #1891", "[Fixed] Prune old log files - #1540", "[Fixed] Ensure the local path is valid before trying to create a new repository - #1487", "[Fixed] Support cloning repository wikis - #1624", "[Fixed] Disable the Select All checkbox when there are no changes - #1389", "[Fixed] Changed docx files wouldn't show anything in the diff panel - #1990", "[Fixed] Disable the Merge button when there are no commits to merge - #1359", "[Fixed] Username/password authentication not working for GitHub Enterprise - #2064", "[Fixed] Better error messages when an API call fails - #2017", "[Fixed] Create the 'logs' directory if it doesn't exist - #1550", "[Fixed] Enable the 'Remove' menu item for missing repositories - #1776" ], "0.6.1": [ "[Fixed] Properly log stats opt in/out - #1949", "[Fixed] Source maps for exceptions in the main process - #1957", "[Fixed] Styling of the exception dialog - #1956", "[Fixed] Handle ambiguous references - #1947", "[Fixed] Handle non-ASCII text in diffs - #1970", "[Fixed] Uncaught exception when hitting the arrow keys after showing autocompletions - #1971", "[Fixed] Clear the organizations list when publishing a new repository and switching between tabs - #1969", "[Fixed] Push properly when a tracking branch has a different name from the local branch - #1967", "[Improved] Warn when line endings will change - #1906" ], "0.6.0": [ "[Fixed] Issue autocompletion not working for older issues - #1814", "[Fixed] GitHub repository association not working for repositories with some remote URL formats - #1826 #1679", "[Fixed] Don't try to delete a remote branch that no longer exists - #1829", "[Fixed] Tokens created by development builds would be used in production builds but wouldn't work - #1727", "[Fixed] Submodules can now be added - #708", "[Fixed] Properly handle the case where a file is added to the index but removed from the working tree - #1310", "[Fixed] Use a local image for the default avatar - #1621", "[Fixed] Make the file path in diffs selectable - #1768", "[Improved] More logging! - #1823", "[Improved] Better error message when trying to add something that's not a repository - #1747", "[Improved] Copy the shell environment into the app's environment - #1796", "[Improved] Updated to Git 2.13.0 - #1897", "[Improved] Add 'Reveal' to the contextual menu for changed files - #1566", "[Improved] Better handling of large diffs - #1818 #1524", "[Improved] App launch time - #1900" ], "0.5.9": [ "[New] Added Zoom In and Zoom Out - #1217", "[Fixed] Various errors when on an unborn branch - #1450", "[Fixed] Disable push/pull menu items when there is no remote - #1448", "[Fixed] Better error message when the GitHub Enterprise version is too old - #1628", "[Fixed] Error parsing non-JSON responses - #1505 #1522", "[Fixed] Updated the 'Install Git' help documentation link - #1797", "[Fixed] Disable menu items while in the Welcome flow - #1529", "[Fixed] Windows: Fall back to HOME if Document cannot be found - #1825", "[Improved] Close the window when an exception occurs - #1562", "[Improved] Always use merge when pulling - #1627", "[Improved] Move the 'New Branch' menu item into the Branch menu - #1757", "[Improved] Remove Repository's default button is now Cancel - #1751", "[Improved] Only fetch the default remote - #1435", "[Improved] Faster commits with many files - #1405", "[Improved] Measure startup time more reliably - #1798", "[Improved] Prefer the GitHub repository name instead of the name on disk - #664" ], "0.5.8": [ "[Fixed] Switching tabs in Preferences/Settings or Repository Settings would close the dialog - #1724", "[Improved] Standardized colors which improves contrast and readability - #1713" ], "0.5.7": [ "[Fixed] Windows: Handle protocol events which launch the app - #1582", "[Fixed] Opting out of stats reporting in the Welcome flow - #1698", "[Fixed] Commit description text being too light - #1695", "[Fixed] Exception on startup if the app was activated too quickly - #1564", "[Improved] Default directory for cloning now - #1663", "[Improved] Accessibility support - #1289", "[Improved] Lovely blank slate illustrations - #1708" ], "0.5.6": [ "[Fixed] macOS: The buttons in the Untrusted Server dialog not doing anything - #1622", "[Fixed] Better warning in Rename Branch when the branch will be created with a different name than was entered - #1480", "[Fixed] Provide a tooltip for commit summaries in the History list - #1483", "[Fixed] Prevent the Update Available banner from getting squished - #1632", "[Fixed] Title bar not responding to double-clicks - #1590 #1655", "[Improved] Discard All Changes is now accessible by right-clicking the file column header - #1635" ], "0.5.5": [ "[Fixed] Save the default path after creating a new repository - #1486", "[Fixed] Only let the user launch the browser once for the OAuth flow - #1427", "[Fixed] Don't linkify invalid URLs - #1456", "[Fixed] Excessive padding in the Merge Branch dialog - #1577", "[Fixed] Octicon pixel alignment issues - #1584", "[Fixed] Windows: Invoking some menu items would break the window's snapped state - #1603", "[Fixed] macOS: Errors authenticating while pushing - #1514", "[Fixed] Don't linkify links in the History list or in Undo - #1548 #1608 #1474", "[Fixed] Diffs not working when certain git config values were set - #1559" ], "0.5.4": [ "[Fixed] The release notes URL pointed to the wrong page - #1503", "[Fixed] Only create the `logs` directory if it doesn't already exist - #1510", "[Fixed] Uncaught exception creating a new repository if you aren't a member of any orgs - #1507", "[Fixed] Only report the first uncaught exception - #1517", "[Fixed] Include the name of the default branch in the New Branch dialog - #1449", "[Fixed] Uncaught exception if a network error occurred while loading user email addresses - #1522 #1508", "[Fixed] Uncaught exception while performing a contextual menu action - #1532", "[Improved] Move all error logging to the main process - #1473", "[Improved] Stats reporting reliability - #1561" ], "0.5.3": [ "[Fixed] Display of large image diffs - #1494", "[Fixed] Discard Changes spacing - #1495" ], "0.5.2": [ "[Fixed] Display errors that happen while publishing a repository - #1396", "[Fixed] Menu items not updating - #1462", "[Fixed] Always select the first changed file - #1306", "[Fixed] macOS: Use Title Case consistently - #1477 #1481", "[Fixed] Create Branch padding - #1479", "[Fixed] Bottom padding in commit descriptions - #1345", "[Improved] Dialog polish - #1451", "[Improved] Store logs in a logs directory - #1370", "[Improved] New Welcome illustrations - #1471", "[Improved] Request confirmation before removing a repository - #1233", "[Improved] Windows icon polish - #1457" ], "0.5.1": [ "[New] Windows: A nice little gif while installing the app - #1440", "[Fixed] Disable pinch zoom - #1431", "[Fixed] Don't show carriage return indicators in diffs - #1444", "[Fixed] History wouldn't update after switching branches - #1446", "[Improved] Include more information in exception reports - #1429", "[Improved] Updated Terms and Conditions - #1438", "[Improved] Sub-pixel anti-aliasing in some lists - #1452", "[Improved] Windows: A new application identifier, less likely to collide with other apps - #1441" ], "0.5.0": [ "[Added] Menu item for showing the app logs - #1349", "[Fixed] Don't let the two-factor authentication dialog be submitted while it's empty - #1386", "[Fixed] Undo Commit showing the wrong commit - #1373", "[Fixed] Windows: Update the icon used for the installer - #1410", "[Fixed] Undoing the first commit - #1401", "[Fixed] A second window would be opened during the OAuth dance - #1382", "[Fixed] Don't include the comment from the default merge commit message - #1367", "[Fixed] Show progress while committing - #923", "[Fixed] Windows: Merge Branch sizing would be wrong on high DPI monitors - #1210", "[Fixed] Windows: Resize the app from the top left corner - #1424", "[Fixed] Changing the destination path for cloning a repository now appends the repository's name - #1408", "[Fixed] The blank slate view could be visible briefly when the app launched - #1398", "[Improved] Performance updating menu items - #1321", "[Improved] Windows: Dim the title bar when the app loses focus - #1189" ], "0.0.39": ["[Fixed] An uncaught exception when adding a user - #1394"], "0.0.38": [ "[New] Shiny new icon! - #1221", "[New] More helpful blank slate view - #871", "[Fixed] Don't allow Undo while pushing/pulling/fetching - #1047", "[Fixed] Updating the default branch on GitHub wouldn't be reflected in the app - #1028 #1314", "[Fixed] Long repository names would overflow their container - #1331", "[Fixed] Removed development menu items in production builds - #1031 #1251 #1323 #1340", "[Fixed] Create Branch no longer changes as it's animating closed - #1304", "[Fixed] Windows: Cut / Copy / Paste menu items not working - #1379", "[Improved] Show a better error message when the user tries to authenticate with a personal access token - #1313", "[Improved] Link to the repository New Issue page from the Help menu - #1349", "[Improved] Clone in Desktop opens the Clone dialog - #918" ], "0.0.37": [ "[Fixed] Better display of the 'no newline at end of file' indicator - #1253", "[Fixed] macOS: Destructive dialogs now use the expected button order - #1315", "[Fixed] Display of submodule paths - #785", "[Fixed] Incomplete stats submission - #1337", "[Improved] Redesigned welcome flow - #1254", "[Improved] App launch time - #1225", "[Improved] Handle uncaught exceptions - #1106" ], "0.0.36": [ "[Fixed] Bugs around associating an email address with a GitHub user - #975", "[Fixed] Use the correct reference name for an unborn branch - #1283", "[Fixed] Better diffs for renamed files - #980", "[Fixed] Typo in Create Branch - #1303", "[Fixed] Don't allow whitespace-only branch names - #1288", "[Improved] Focus ring polish - #1287", "[Improved] Less intrusive update notifications - #1136", "[Improved] Faster launch time on Windows - #1309", "[Improved] Faster git information refreshing - #1305", "[Improved] More consistent use of sentence case on Windows - #1316", "[Improved] Autocomplete polish - #1241" ], "0.0.35": [ "[New] Show push/pull/fetch progress - #1238", "[Fixed] macOS: Add the Zoom menu item - #1260", "[Fixed] macOS: Don't show the titlebar while full screened - #1247", "[Fixed] Windows: Updates would make the app unresponsive - #1269", "[Fixed] Windows: Keyboard navigation in menus - #1293", "[Fixed] Windows: Repositories list item not working - #1293", "[Fixed] Auto updater errors not being propagated properly - #1266", "[Fixed] Only show the current branch tooltip on the branches button - #1275", "[Fixed] Double path truncation - #1270", "[Fixed] Sometimes toggling a file's checkbox would get undone - #1248", "[Fixed] Uncaught exception when internet connectivity was lost - #1048", "[Fixed] Cloned repositories wouldn't be associated with their GitHub repository - #1285", "[Improved] Better performance on large repositories - #1281", "[Improved] Commit summary is now expandable when the summary is long - #519", "[Improved] The SHA in historical commits is now selectable - #1154", "[Improved] The Create Branch dialog was polished and refined - #1137" ], "0.0.34": [ "[New] macOS: Users can choose whether to accept untrusted certificates - #671", "[New] Windows: Users are prompted to install git when opening a shell if it is not installed - #813", "[New] Checkout progress is shown if branch switching takes a while - #1208", "[New] Commit summary and description are automatically populated for merge conflicts - #1228", "[Fixed] Cloning repositories while not signed in - #1163", "[Fixed] Merge commits are now created as merge commits - #1216", "[Fixed] Display of diffs with /r newline - #1234", "[Fixed] Windows: Maximized windows are no longer positioned slightly off screen - #1202", "[Fixed] JSON parse errors - #1243", "[Fixed] GitHub Enterprise repositories were not associated with the proper Enterprise repository - #1242", "[Fixed] Timestamps in the Branches list would wrap - #1255", "[Fixed] Merges created from pulling wouldn't use the right git author - #1262", "[Improved] Check for update errors are suppressed if they happen in the background - #1104, #1195", "[Improved] The shortcut to show the repositories list is now command or control-T - #1220", "[Improved] Command or control-W now closes open dialogs - #949", "[Improved] Less memory usage while parsing large diffs - #1235" ], "0.0.33": ["[Fixed] Update Now wouldn't update now - #1209"], "0.0.32": [ "[New] You can now disable stats reporting from Preferences > Advanced - #1120", "[New] Acknowledgements are now available from About - #810", "[New] Open pull requests from dot com in the app - #808", "[Fixed] Don't show background fetch errors - #875", "[Fixed] No more surprise and delight - #620", "[Fixed] Can't discard renamed files - #1177", "[Fixed] Logging out of one account would log out of all accounts - #1192", "[Fixed] Renamed files truncation - #695", "[Fixed] Git on Windows now integrates with the system certificate store - #706", "[Fixed] Cloning with an account/repoository shortcut would always fail - #1150", "[Fixed] OS version reporting - #1130", "[Fixed] Publish a new repository would always fail - #1046", "[Fixed] Authentication would fail for the first repository after logging in - #1118", "[Fixed] Don't flood the user with errors if a repository disappears on disk - #1132", "[Improved] The Merge dialog uses the Branches list instead of a drop down menu - #749", "[Improved] Lots of design polish - #1188, #1183, #1170, #1184, #1181, #1179, #1142, #1125" ], "0.0.31": [ "[New] Prompt user to login when authentication error occurs - #903", "[New] Windows application has a new app menu, replaces previous hamburger menu - #991", "[New] Refreshed colours to align with GitHub website scheme - #1077", "[New] Custom about dialog on all platforms - #1102", "[Fixed] Improved error handling when probing for a GitHub Enterprise server - #1026", "[Fixed] User can cancel 2FA flow - #1057", "[Fixed] Tidy up current set of menu items - #1063", "[Fixed] Manually focus the window when a URL action has been received - #1072", "[Fixed] Disable middle-click event to prevent new windows being launched - #1074", "[Fixed] Pre-fill the account name in the Welcome wizard, not login - #1078", "[Fixed] Diffs wouldn't work if an external diff program was configured - #1123", "[Improved] Lots of design polish work - #1113, #1099, #1094, #1077" ], "0.0.30": [ "[Fixed] Crash when invoking menu item due to incorrect method signature - #1041" ], "0.0.29": [ "[New] Commit summary and description fields now display issues and mentions as links for GitHub repositories - #941", "[New] Show placeholder when the repository cannot be found on disk - #946", "[New] New Repository actions moved out of popover and into new menu - #1018", "[Fixed] Display a helpful error message when an unverified user signs into GitHub Desktop - #1010", "[Fixed] Fix kerning issue when access keys displayed - #1033", "[Fixed] Protected branches show a descriptive error when the push is rejected - #1036", "[Fixed] 'Open in shell' on Windows opens to repository location - #1037" ], "0.0.28": ["[Fixed] Bumping release notes to test deployments again"], "0.0.27": [ "[Fixed] 2FA dialog when authenticating has information for SMS authentication - #1009", "[Fixed] Autocomplete for users handles accounts containing `-` - #1008" ], "0.0.26": [ "[Fixed] Address deployment issue by properly documenting release notes" ], "0.0.25": [ "[Added] Autocomplete displays user matches - #942", "[Fixed] Handle Enter key in repository and branch list when no matches exist - #995", "[Fixed] 'Add Repository' button displays in dropdown when repository list empty - #984", "[Fixed] Correct icon displayed for non-GitHub repository - #964 #955", "[Fixed] Enter key when inside dialog submits form - #956", "[Fixed] Updated URL handler entry on macOS - #945", "[Fixed] Commit button is disabled while commit in progress - #940", "[Fixed] Handle index state change when gitginore change is discarded - #935", "[Fixed] 'Create New Branch' view squashes branch list when expanded - #927", "[Fixed] Application creates repository path if it doesn't exist on disk - #925", "[Improved] Preferences sign-in flow updated to standalone dialogs - #961" ], "0.0.24": ["Changed a thing", "Added another thing"] } }
lixinyang123 / AvaloniaAOTAvalonia Native AOT Templete. Smaller size, lower memory usage and faster startup speed.
Rastaman4e / 1NICEHASH PLATFORM TERMS OF USE AND NICEHASH MINING TERMS OF SERVICE PLEASE READ THESE NICEHASH PLATFORM TERMS OF USE AND NICEHASH MINING TERMS OF SERVICE (“Terms”) CAREFULLY BEFORE USING THE THE PLATFORM OR SERVICES DESCRIBED HEREIN. BY SELECTING “I AGREE”, ACCESSING THE PLATFORM, USING NICEHASH MINING SERVICES OR DOWNLOADING OR USING NICEHASH MINING SOFTWARE, YOU ARE ACKNOWLEDGING THAT YOU HAVE READ THESE TERMS, AS AMENDED FROM TIME TO TIME, AND YOU ARE AGREEING TO BE BOUND BY THEM. IF YOU DO NOT AGREE TO THESE TERMS, OR ANY SUBSEQUENT AMENDMENTS, CHANGES OR UPDATES, DO NOT ACCESS THE PLATFORM, USE NICEHASH MINING SERVICES OR USE THE NICEHASH MINING SOFTWARE. GENERAL These Terms apply to users of the NiceHash Platform (“Platform” and NiceHash Mining Services (“Services”) which are provided to you by NICEHASH Ltd, company organized and existing under the laws of the British Virgin Islands, with registered address at Intershore Chambers, Road Town, Tortola, British Virgin Islands, registration number: 2048669, hereinafter referred to as “NiceHash, as well as “we” or “us”. ELIGIBILITY By using the NiceHash platform and NiceHash Mining Services, you represent and warrant that you: are at least Minimum Age and have capacity to form a binding contract; have not previously been suspended or removed from the NiceHash Platform; have full power and authority to enter into this agreement and in doing so will not violate any other agreement to which you are a party; are not not furthering, performing, undertaking, engaging in, aiding, or abetting any unlawful activity through your relationship with us, through your use of NiceHash Platform or use of NiceHash Mining Services; will not use NiceHash Platform or NiceHash Mining Services if any applicable laws in your country prohibit you from doing so in accordance with these Terms. We reserve the right to terminate your access to the NiceHash Platform and Mining Services for any reason and in our sole and absolute discretion. Use of NiceHash Platform and Mining Services is void where prohibited by applicable law. Depending on your country of residence or incorporation or registered office, you may not be able to use all the functions of the NiceHash Platform or services provided therein. It is your responsibility to follow the rules and laws in your country of residence and/or country from which you access the NiceHash Platform. DEFINITIONS NiceHash Platform means a website located on the following web address: www.nicehash.com. NiceHash Mining Services mean all services provided by NiceHash, namely the provision of the NiceHash Platform, NiceHash Hashing power marketplace, NiceHash API, NiceHash OS, NiceHash Mining Software including licence for NiceHash Miner, NiceHash Private Endpoint, NiceHash Account, NiceHash mobile apps, and all other software products, applications and services associated with these products, except for the provision of NiceHash Exchange Services. NiceHash Exchange Service means a service which allows trading of digital assets in the form of digital tokens or cryptographic currency for our users by offering them a trading venue, helping them find a trading counterparty and providing the means for transaction execution. NiceHash Exchange Services are provided by NICEX Ltd and accessible at the NiceHash Platform under NiceHash Exchange Terms of Service. Hashing power marketplace means an infrastructure provided by the NiceHash which enables the Hashing power providers to point their rigs towards NiceHash stratum servers where Hashing power provided by different Hashing power providers is gathered and sold as generic Hashing power to the Hashing power buyers. Hashing power buyer means a legal entity or individual who buys the gathered and generic hashing power on the Hashing power marketplace from undefined Hashing power providers. Hashing power provider means a legal entity or individual who sells his hashing power on the Hashing power marketplace to undefined Hashing power buyers. NiceHash Mining Software means NiceHash Miner and any other software available via the NiceHash Platform. NiceHash Miner means a comprehensive software with graphical user interface and web interface, owned by NiceHash. NiceHash Miner is a process manager software which enables the Hashing power providers to point their rigs towards NiceHash stratum servers and sell their hashing power to the Hashing power buyers. NiceHash Miner also means any and all of its code, compilations, updates, upgrades, modifications, error corrections, patches and bug fixes and similar. NiceHash Miner does not mean third party software compatible with NiceHash Miner (Third Party Plugins and Miners). NiceHash QuickMiner means a software accessible at https://www.nicehash.com/quick-miner which enables Hashing power providers to point their PCs or rigs towards NiceHash stratum servers and sell their hashing power to the Hashing power buyers. NiceHash QuickMiner is intended as a tryout tool. Hashing power rig means all hardware which produces hashing power that represents computation power which is required to calculate the hash function of different type of cryptocurrency. Secondary account is an account managed by third party from which the Account holder deposits funds to his NiceHash Wallet or/and to which the Account holder withdraws funds from his NiceHash Wallet. Stratum is a lightweight mining protocol: https://slushpool.com/help/manual/stratum-protocol. NiceHash Account means an online account available on the NiceHash Platform and created by completing the registration procedure on the NiceHash Platform. Account holder means an individual or legal entity who completes the registration procedure and successfully creates the NiceHash Account. Minimum Age means 18 years old or older, if in order for NiceHash to lawfully provide the Services to you without parental consent (including using your personal data). NiceHash Wallet means a wallet created automatically for the Account holder and provided by the NiceHash Wallet provider. NiceHash does not hold funds on behalf of the Account holder but only transfers Account holder’s requests regarding the NiceHash Wallet transaction to the NiceHash Wallet provider who executes the requested transactions. In this respect NiceHash only processes and performs administrative services related to the payments regarding the NiceHash Mining Services and NiceHash Exchange Services, if applicable. NiceHash Wallet provider is a third party which on the behalf of the Account holder provides and manages the NiceHash Wallet, holds, stores and transfers funds and hosts NiceHash Wallet. For more information about the NiceHash Wallet provider, see the following website: https://www.bitgo.com/. Blockchain network is a distributed database that is used to maintain a continuously growing list of records, called blocks. Force Majeure Event means any governmental or relevant regulatory regulations, acts of God, war, riot, civil commotion, fire, flood, or any disaster or an industrial dispute of workers unrelated to you or NiceHash. Any act, event, omission, happening or non-happening will only be considered Force Majeure if it is not attributable to the wilful act, neglect or failure to take reasonable precautions of the affected party, its agents, employees, consultants, contractors and sub-contractors. SALE AND PURCHASE OF HASHING POWER Hashing power providers agree to sell and NiceHash agrees to proceed Hashing power buyers’ payments for the provided hashing power on the Hashing power marketplace, on the Terms set forth herein. According to the applicable principle get-paid-per-valid-share (pay as you go principle) Hashing power providers will be paid only for validated and accepted hashing power to their NiceHash Wallet or other wallet, as indicated in Account holder’s profile settings or in stratum connection username. In some cases, no Hashing power is sent to Hashing power buyers or is accepted by NiceHash Services, even if Hashing power is generated on the Hashing power rigs. These cases include usage of slower hardware as well as software, hardware or network errors. In these cases, Hashing power providers are not paid for such Hashing power. Hashing power buyers agree to purchase and NiceHash agrees to process the order and forward the purchased hashing power on the Hashing power marketplace, on the Terms set forth herein. According to the applicable principle pay-per-valid-share (pay as you go principle) Hashing power buyers will pay from their NiceHash Wallet only for the hashing power that was validated by our engine. When connection to the mining pool which is selected on the Hashing power order is lost or when an order is cancelled during its lifetime, Hashing power buyer pays for additional 10 seconds worth of hashing power. Hashing power order is charged for extra hashing power when mining pool which is selected on the Hashing power order, generates rapid mining work changes and/or rapid mining job switching. All payments including any fees will be processed in crypto currency and NiceHash does not provide an option to sale and purchase of the hashing power in fiat currency. RISK DISCLOSURE If you choose to use NiceHash Platform, Services and NiceHash Wallet, it is important that you remain aware of the risks involved, that you have adequate technical resources and knowledge to bear such risks and that you monitor your transactions carefully. General risk You understand that NiceHash Platform and Services, blockchain technology, Bitcoin, all other cryptocurrencies and cryptotokens, proof of work concept and other associated and related technologies are new and untested and outside of NiceHash’s control. You acknowledge that there are major risks associated with these technologies. In addition to the risks disclosed below, there are risks that NiceHash cannot foresee and it is unreasonable to believe that such risk could have been foreseeable. The performance of NiceHash’s obligation under these Terms will terminate if market or technology circumstances change to such an extent that (i) these Terms clearly no longer comply with NiceHash’s expectations, (ii) it would be unjust to enforce NiceHash’s obligations in the general opinion or (iii) NiceHash’s obligation becomes impossible. NiceHash Account abuse You acknowledge that there is risk associated with the NiceHash Account abuse and that you have been fully informed and warned about it. The funds stored in the NiceHash Wallet may be disposed by third party in case the third party obtains the Account holder’s login credentials. The Account holder shall protect his login credentials and his electronic devices where the login credentials are stored against unauthorized access. Regulatory risks You acknowledge that there is risk associated with future legislation which may restrict, limit or prohibit certain aspects of blockchain technology which may also result in restriction, limitation or prohibition of NiceHash Services and that you have been fully informed and warned about it. Risk of hacking You acknowledge that there is risk associated with hacking NiceHash Services and NiceHash Wallet and that you have been fully informed and warned about it. Hacker or other groups or organizations may attempt to interfere with NiceHash Services or NiceHash Wallet in any way, including without limitation denial of services attacks, Sybil attacks, spoofing, smurfing, malware attacks, mining attacks or consensus-based attacks. Cryptocurrency risk You acknowledge that there is risk associated with the cryptocurrencies which are used as payment method and that you have been fully informed and warned about it. Cryptocurrencies are prone to, but not limited to, value volatility, transaction costs and times uncertainty, lack of liquidity, availability, regulatory restrictions, policy changes and security risks. NiceHash Wallet risk You acknowledge that there is risk associated with funds held on the NiceHash Wallet and that you have been fully informed and warned about it. You acknowledge that NiceHash Wallet is provided by NiceHash Wallet provider and not NiceHash. You acknowledge and agree that NiceHash shall not be responsible for any NiceHash Wallet provider’s services, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality or any other aspect thereof. NiceHash does not assume and shall not have any liability or responsibility to you or any other person or entity for any Hash Wallet provider’s services. Hash Wallet provider’s services and links thereto are provided solely as a convenience to you and you access and use them entirely at your own risk and subject to NiceHash Wallet provider’s terms and conditions. Since the NiceHash Wallet is a cryptocurrency wallet all funds held on it are entirely uninsured in contrast to the funds held on the bank account or other financial institutions which are insured. Connection risk You acknowledge that there are risks associated with usage of NiceHash Services which are provided through the internet including, but not limited to, the failure of hardware, software, configuration and internet connections and that you have been fully informed and warned about it. You acknowledge that NiceHash will not be responsible for any configuration, connection or communication failures, disruptions, errors, distortions or delays you may experience when using NiceHash Services, however caused. Hashing power provision risk You acknowledge that there are risks associated with the provisions of the hashing power which is provided by the Hashing power providers through the Hashing power marketplace and that you have been fully informed and warned about it. You acknowledge that NiceHash does not provide the hashing power but only provides the Hashing power marketplace as a service. Hashing power providers’ Hashing power rigs are new and untested and outside of NiceHash’s control. There is a major risk that the Hashing power rigs (i) will stop providing hashing power, (ii) will provide hashing power in an unstable way, (iii) will be wrongly configured or (iv) provide insufficient speed of the hashing power. Hashing power rigs as hardware could be subject of damage, errors, electricity outage, misconfiguration, connection or communication failures and other malfunctions. NiceHash will not be responsible for operation of Hashing power rigs and its provision of hashing power. By submitting a Hashing power order you agree to Hashing power no-refund policy – all shares forwarded to mining pool, selected on the Hashing power order are final and non-refundable. Hashing power profitability risk You acknowledge that there is risk associated with the profitability of the hashing power provision and that you have been fully informed and warned about it. You acknowledge that all Hashing power rig’s earning estimates and profitability calculations on NiceHash Platform are only for informational purposes and were made based on the Hashing power rigs set up in the test environments. NiceHash does not warrant that your Hashing power rigs would achieve the same profitability or earnings as calculated on NiceHash Platform. There is risk that your Hashing power rig would not produce desired hashing power quantity and quality and that your produced hashing power would differentiate from the hashing power produced by our Hashing power rigs set up in the test environments. There is risk that your Hashing power rigs would not be as profitable as our Hashing power rigs set up in the test environments or would not be profitable at all. WARRANTIES NiceHash Platform and Mining Services are provided on the “AS IS” and “AS AVAILABLE” basis, including all faults and defects. To the maximum extent permitted by applicable law, NiceHash makes no representations and warranties and you waive all warranties of any kind. Particularly, without limiting the generality of the foregoing, the NiceHash makes no representations and warranties, whether express, implied, statutory or otherwise regarding NiceHash Platform and Mining Services or other services related to NiceHash Platform and provided by third parties, including any warranty that such services will be uninterrupted, harmless, secure or not corrupt or damaged, meet your requirements, achieve any intended results, be compatible or work with any other software, applications, systems or services, meet any performance or error free or that any errors or defects can or will be corrected. Additionally NiceHash makes no representations and warranties, whether express, implied, statutory or otherwise of merchantability, suitability, reliability, availability, timeliness, accuracy, satisfactory quality, fitness for a particular purpose or quality, title and non-infringement with respect to any of the Mining Services or other services related to NiceHash Platform and provided by third parties, or quiet enjoyment and any warranties arising out of any course of dealing, course of performance, trade practice or usage of NiceHash Platform and Mining Services including information, content and material contained therein. Especially NiceHash makes no representations and warranties, whether express, implied, statutory or otherwise regarding any payment services and systems, NiceHash Wallet which is provided by third party or any other financial services which might be related to the NiceHash Platform and Mining Services. You acknowledge that you do not rely on and have not been induced to accept the NiceHash Platform and Mining Services according to these Terms on the basis of any warranties, representations, covenants, undertakings or any other statement whatsoever, other than expressly set out in these Terms that neither the NiceHash nor any of its respective agents, officers, employees or advisers have given any such warranties, representations, covenants, undertakings or other statements. LIABILITY NiceHash and their respective officers, employees or agents will not be liable to you or anyone else, to the maximum extent permitted by applicable law, for any damages of any kind, including, but not limited to, direct, consequential, incidental, special or indirect damages (including but not limited to lost profits, trading losses or damages that result from use or loss of use of NiceHash Services or NiceHash Wallet), even if NiceHash has been advised of the possibility of such damages or losses, including, without limitation, from the use or attempted use of NiceHash Platform and Mining Services, NiceHash Wallet or other related websites or services. NiceHash does not assume any obligations to users in connection with the unlawful alienation of Bitcoins, which occurred on 6. 12. 2017 with NICEHASH, d. o. o., and has been fully reimbursed with the completion of the NiceHash Repayment Program. NiceHash will not be responsible for any compensation, reimbursement, or damages arising in connection with: (i) your inability to use the NiceHash Platform and Mining Services, including without limitation as a result of any termination or suspension of the NiceHash Platform or these Terms, power outages, maintenance, defects, system failures, mistakes, omissions, errors, defects, viruses, delays in operation or transmission or any failure of performance, (ii) the cost of procurement of substitute goods or services, (iii) any your investments, expenditures, or commitments in connection with these Terms or your use of or access to the NiceHash Platform and Mining Services, (iv) your reliance on any information obtained from NiceHash, (v) Force Majeure Event, communications failure, theft or other interruptions or (vi) any unauthorized access, alteration, deletion, destruction, damage, loss or failure to store any data, including records, private key or other credentials, associated with NiceHash Platform and Mining Services or NiceHash Wallet. Our aggregate liability (including our directors, members, employees and agents), whether in contract, warranty, tort (including negligence, whether active, passive or imputed), product liability, strict liability or other theory, arising out of or relating to the use of NiceHash Platform and Mining Services, or inability to use the Platform and Services under these Terms or under any other document or agreement executed and delivered in connection herewith or contemplated hereby, shall in any event not exceed 100 EUR per user. You will defend, indemnify, and hold NiceHash harmless and all respective employees, officers, directors, and representatives from and against any claims, demand, action, damages, loss, liabilities, costs and expenses (including reasonable attorney fees) arising out of or relating to (i) any third-party claim concerning these Terms, (ii) your use of, or conduct in connection with, NiceHash Platform and Mining Services, (iii) any feedback you provide, (iv) your violation of these Terms, (v) or your violation of any rights of any other person or entity. If you are obligated to indemnify us, we will have the right, in our sole discretion, to control any action or proceeding (at our expense) and determine whether we wish to settle it. If we are obligated to respond to a third-party subpoena or other compulsory legal order or process described above, you will also reimburse us for reasonable attorney fees, as well as our employees’ and contractors’ time and materials spent responding to the third-party subpoena or other compulsory legal order or process at reasonable hourly rates. The Services and the information, products, and services included in or available through the NiceHash Platform may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Improvements or changes on the NiceHash Platform can be made at any time. NICEHASH ACCOUNT The registration of the NiceHash Account is made through the NiceHash Platform, where you are required to enter your email address and password in the registration form. After successful completion of registration, the confirmation email is sent to you. After you confirm your registration by clicking on the link in the confirmation email the NiceHash Account is created. NiceHash will send you proof of completed registration once the process is completed. When you create NiceHash Account, you agree to (i) create a strong password that you change frequently and do not use for any other website, (ii) implement reasonable and appropriate measures designed to secure access to any device which has access to your email address associated with your NiceHash Account and your username and password for your NiceHash Account, (iii) maintain the security of your NiceHash Account by protecting your password and by restricting access to your NiceHash Account; (iv) promptly notify us if you discover or otherwise suspect any security breaches related to your NiceHash Account so we can take all required and possible measures to secure your NiceHash Account and (v) take responsibility for all activities that occur under your NiceHash Account and accept all risks of any authorized or unauthorized access to your NiceHash Account, to the maximum extent permitted by law. Losing access to your email, registered at NiceHash Platform, may also mean losing access to your NiceHash Account. You may not be able to use the NiceHash Platform or Mining Services, execute withdrawals and other security sensitive operations until you regain access to your email address, registered at NiceHash Platform. If you wish to change the email address linked to your NiceHash Account, we may ask you to complete a KYC procedure for security purposes. This step serves solely for the purpose of identification in the process of regaining access to your NiceHash Account. Once the NiceHash Account is created a NiceHash Wallet is automatically created for the NiceHash Account when the request for the first deposit to the NiceHash Wallet is made by the user. Account holder’s NiceHash Wallet is generated by NiceHash Wallet provider. Account holder is strongly suggested to enhance the security of his NiceHash Account by adding an additional security step of Two-factor authentication (hereinafter “2FA”) when logging into his account, withdrawing funds from his NiceHash Wallet or placing a new order. Account holder can enable this security feature in the settings of his NiceHash Account. In the event of losing or changing 2FA code, we may ask the Account holder to complete a KYC procedure for security reasons. This step serves solely for the purpose of identification in the process of reactivating Account holders 2FA and it may be subject to an a In order to use certain functionalities of the NiceHash Platform, such as paying for the acquired hashing power, users must deposit funds to the NiceHash Wallet, as the payments for the hashing power could be made only through NiceHash Wallet. Hashing power providers have two options to get paid for the provided hashing power: (i) by using NiceHash Wallet to receive the payments or (ii) by providing other Bitcoin address where the payments shall be received to. Hashing power providers provide their Bitcoin address to NiceHash by providing such details via Account holder’s profile settings or in a form of a stratum username while connecting to NiceHash stratum servers. Account holder may load funds on his NiceHash Wallet from his Secondary account. Account holder may be charged fees by the Secondary account provider or by the blockchain network for such transaction. NiceHash is not responsible for any fees charged by Secondary account providers or by the blockchain network or for the management and security of the Secondary accounts. Account holder is solely responsible for his use of Secondary accounts and Account holder agrees to comply with all terms and conditions applicable to any Secondary accounts. The timing associated with a load transaction will depend in part upon the performance of Secondary accounts providers, the performance of blockchain network and performance of the NiceHash Wallet provider. NiceHash makes no guarantee regarding the amount of time it may take to load funds on to NiceHash Wallet. NiceHash Wallet shall not be used by Account holders to keep, save and hold funds for longer period and also not for executing other transactions which are not related to the transactions regarding the NiceHash Platform. The NiceHash Wallet shall be used exclusively and only for current and ongoing transactions regarding the NiceHash Platform. Account holders shall promptly withdraw any funds kept on the NiceHash Wallet that will not be used and are not intended for the reasons described earlier. Commission fees may be charged by the NiceHash Wallet provider, by the blockchain network or by NiceHash for any NiceHash Wallet transactions. Please refer to the NiceHash Platform, for more information about the commission fees for NiceHash Wallet transactions which are applicable at the time of the transaction. NiceHash reserves the right to change these commission fees according to the provisions to change these Terms at any time for any reason. You have the right to use the NiceHash Account only in compliance with these Terms and other commercial terms and principles published on the NiceHash Platform. In particular, you must observe all regulations aimed at ensuring the security of funds and financial transactions. Provided that the balance of funds in your NiceHash Wallet is greater than any minimum balance requirements needed to satisfy any of your open orders, you may withdraw from your NiceHash Wallet any amount of funds, up to the total amount of funds in your NiceHash Wallet in excess of such minimum balance requirements, to Secondary Account, less any applicable withdrawal fees charged by NiceHash or by the blockchain network for such transaction. Withdrawals are not processed instantly and may be grouped with other withdrawal requests. Some withdrawals may require additional verification information which you will have to provide in order to process the withdrawal. It may take up to 24 hours before withdrawal is fully processed and distributed to the Blockchain network. Please refer to the NiceHash Platform for more information about the withdrawal fees and withdrawal processing. NiceHash reserves the right to change these fees according to the provisions to change these Terms at any time for any reason. You have the right to close the NiceHash Account. In case you have funds on your NiceHash Wallet you should withdraw funds from your account prior to requesting NiceHash Account closure. After we receive your NiceHash Account closure request we will deactivate your NiceHash Account. You can read more about closing the NiceHash Account in our Privacy Policy. Your NiceHash Account may be deactivated due to your inactivity. Your NiceHash account may be locked and a mandatory KYC procedure is applied for security reasons, if it has been more than 6 month since your last login. NiceHash or any of its partners or affiliates are not responsible for the loss of the funds, stored on or transferred from the NiceHash Wallet, as well as for the erroneous implementation of the transactions made via NiceHash Wallet, where such loss or faulty implementation of the transaction are the result of a malfunction of the NiceHash Wallet and the malfunction was caused by you or the NiceHash Wallet provider. You are obliged to inform NiceHash in case of loss or theft, as well as in the case of any possible misuse of the access data to your NiceHash Account, without any delay, and demand change of access data or closure of your existing NiceHash Account and submit a request for new access data. NiceHash will execute the change of access data or closure of the NiceHash Account and the opening of new NiceHash Account as soon as technically possible and without any undue delay. All information pertaining to registration, including a registration form, generation of NiceHash Wallet and detailed instructions on the use of the NiceHash Account and NiceHash Wallet are available at NiceHash Platform. The registration form as well as the entire system is properly protected from unwanted interference by third parties. KYC PROCEDURE NiceHash is appropriately implementing AML/CTF and security measures to diligently detect and prevent any malicious or unlawful use of NiceHash Services or use, which is strictly prohibited by these Terms, which are deemed as your agreement to provide required personal information for identity verification. Security measures include a KYC procedure, which is aimed at determining the identity of an individual user or an organisation. We may ask you to complete this procedure before enabling some or all functionalities of the NiceHash platform and provide its services. A KYC procedure might be applied as a security measure when: changing the email address linked to your NiceHash Account, losing or changing your 2FA code; logging in to your NiceHash Account for the first time after the launch of the new NiceHash Platform in August 2019, gaining access to all or a portion of NiceHash Services, NiceHash Wallet and its related services or any portion thereof if they were disabled due to and activating your NiceHash Account if it has been deactivated due to its inactivity and/or security or other reasons. HASHING POWER TRANSACTIONS General NiceHash may, at any time and in our sole discretion, (i) refuse any order submitted or provided hashing power, (ii) cancel an order or part of the order before it is executed, (iii) impose limits on the order amount permitted or on provided hashing power or (iv) impose any other conditions or restrictions upon your use of the NiceHash Platform and Mining Services without prior notice. For example, but not limited to, NiceHash may limit the number of open orders that you may establish or limit the type of supported Hashing power rigs and mining algorithms or NiceHash may restrict submitting orders or providing hashing power from certain locations. Please refer to the NiceHash Platform, for more information about terminology, hashing power transactions’ definitions and descriptions, order types, order submission, order procedure, order rules and other restrictions and limitations of the hashing power transactions. NiceHash reserves the right to change any transaction, definitions, description, order types, procedure, rules, restrictions and limitations at any time for any reason. Orders, provision of hashing power, payments, deposits, withdrawals and other transactions are accepted only through the interface of the NiceHash Platform, NiceHash API and NiceHash Account and are fixed by the software and hardware tools of the NiceHash Platform. If you do not understand the meaning of any transaction option, NiceHash strongly encourages you not to utilize any of those options. Hashing Power Order In order to submit an Hashing Power Order via the NiceHash Account, the Hashing power buyer must have available funds in his NiceHash Wallet. Hashing power buyer submits a new order to buy hashing power via the NiceHash Platform or via the NiceHash API by setting the following parameters in the order form: NiceHash service server location, third-party mining pool, algorithm to use, order type, set amount he is willing to spend on this order, set price per hash he is willing to pay, optionally approximate limit maximum hashing power for his order and other parameters as requested and by confirming his order. Hashing power buyer may submit an order in maximum amount of funds available on his NiceHash Wallet at the time of order submission. Order run time is only approximate since order’s lifetime is based on the number of hashes that it delivers. Particularly during periods of high volume, illiquidity, fast movement or volatility in the marketplace for any digital assets or hashing power, the actual price per hash at which some of the orders are executed may be different from the prevailing price indicated on NiceHash Platform at the time of your order. You understand that NiceHash is not liable for any such price fluctuations. In the event of market disruption, NiceHash Services disruption, NiceHash Hashing Power Marketplace disruption or manipulation or Force Majeure Event, NiceHash may do one or more of the following: (i) suspend access to the NiceHash Account or NiceHash Platform, or (ii) prevent you from completing any actions in the NiceHash Account, including closing any open orders. Following any such event, when trading resumes, you acknowledge that prevailing market prices may differ significantly from the prices available prior to such event. When Hashing power buyer submits an order for purchasing of the Hashing power via NiceHash Platform or via the NiceHash API he authorizes NiceHash to execute the order on his behalf and for his account in accordance with such order. Hashing power buyer acknowledges and agrees that NiceHash is not acting as his broker, intermediary, agent or advisor or in any fiduciary capacity. NiceHash executes the order in set order amount minus NiceHash’s processing fee. Once the order is successfully submitted the order amount starts to decrease in real time according to the payments for the provided hashing power. Hashing power buyer agrees to pay applicable processing fee to NiceHash for provided services. The NiceHash’s fees are deducted from Hashing power buyer’s NiceHash Wallet once the whole order is exhausted and completed. Please refer to the NiceHash Platform, for more information about the fees which are applicable at the time of provision of services. NiceHash reserves the right to change these fees according to the provisions to change these Terms at any time for any reason. The changed fees will apply only for the NiceHash Services provided after the change of the fees. All orders submitted prior the fee change but not necessary completed prior the fee change will be charged according to the fees applicable at the time of the submission of the order. NiceHash will attempt, on a commercially reasonable basis, to execute the Hashing power buyer’s purchase of the hashing power on the Hashing power marketplace under these Terms according to the best-effort delivery approach. In this respect NiceHash does not guarantee that the hashing power will actually be delivered or verified and does not guarantee any quality of the NiceHash Services. Hashing power buyer may cancel a submitted order during order’s lifetime. If an order has been partially executed, Hashing power buyer may cancel the unexecuted remainder of the order. In this case the NiceHash’s processing fee will apply only for the partially executed order. NiceHash reserves the right to refuse any order cancellation request once the order has been submitted. Selling Hashing Power and the Provision of Hashing Power In order to submit the hashing power to the NiceHash stratum server the Hashing power provider must first point its Hashing power rig to the NiceHash stratum server. Hashing power provider is solely responsible for configuration of his Hashing power rig. The Hashing power provider gets paid by Hashing power buyers for all validated and accepted work that his Hashing power rig has produced. The provided hashing power is validated by NiceHash’s stratum engine and validator. Once the hashing power is validated the Hashing power provider is entitled to receive the payment for his work. NiceHash logs all validated hashing power which was submitted by the Hashing power provider. The Hashing power provider receives the payments of current globally weighted average price on to his NiceHash Wallet or his selected personal Bitcoin address. The payments are made periodically depending on the height of payments. NiceHash reserves the right to hold the payments any time and for any reason by indicating the reason, especially if the payments represent smaller values. Please refer to the NiceHash Platform, for more information about the height of payments for provided hashing power, how the current globally weighted average price is calculated, payment periods, payment conditions and conditions for detention of payments. NiceHash reserves the right to change this payment policy according to the provisions to change these Terms at any time for any reason. All Hashing power rig’s earnings and profitability calculations on NiceHash Platform are only for informational purposes. NiceHash does not warrant that your Hashing power rigs would achieve the same profitability or earnings as calculated on NiceHash Platform. You hereby acknowledge that it is possible that your Hashing power rigs would not be as profitable as indicated in our informational calculations or would not be profitable at all. Hashing power provider agrees to pay applicable processing fee to NiceHash for provided Services. The NiceHash’s fees are deducted from all the payments made to the Hashing power provider for his provided work. Please refer to the NiceHash Platform, for more information about the fees which are applicable at the time of provision of services. Hashing power provider which has not submitted any hashing power to the NiceHash stratum server for a period of 90 days agrees that a processing fee of 0.00001000 BTC or less, depending on the unpaid mining balance, will be deducted from his unpaid mining balance. NiceHash reserves the right to change these fees according to the provisions to change these Terms at any time for any reason. The changed fees will apply only for the NiceHash Services provided after the change of the fees. NiceHash will attempt, on a commercially reasonable basis, to execute the provision of Hashing power providers’ hashing power on the Hashing power marketplace under these Terms according to the best-effort delivery approach. In this respect NiceHash does not guarantee that the hashing power will actually be delivered or verified and does not guarantee any quality of the NiceHash Services. Hashing power provider may disconnect the Hashing power rig from the NiceHash stratum server any time. NiceHash reserves the right to refuse any Hashing power rig once the Hashing power rig has been pointed towards NiceHash stratum server. RESTRICTIONS When accessing the NiceHash Platform or using the Mining Services or NiceHash Wallet, you warrant and agree that you: will not use the Services for any purpose that is unlawful or prohibited by these Terms, will not violate any law, contract, intellectual property or other third-party right or commit a tort, are solely responsible for your conduct while accessing the NiceHash Platform or using the Mining Services or NiceHash Wallet, will not access the NiceHash Platform or use the Mining Services in any manner that could damage, disable, overburden, or impair the provision of the Services or interfere with any other party's use and enjoyment of the Services, will not misuse and/or maliciously use Hashing power rigs, you will particularly refrain from using network botnets or using NiceHash Platform or Mining Services with Hashing power rigs without the knowledge or awareness of Hashing power rig owner(s), will not perform or attempt to perform any kind of malicious attacks on blockchains with the use of the NiceHash Platform or Mining Services, intended to maliciously gain control of more than 50% of the network's mining hash rate, will not use the NiceHash Platform or Mining Services for any kind of market manipulation or disruption, such as but not limited to NiceHash Mining Services disruption and NiceHash Hashing Power Marketplace manipulation. In case of any of the above mentioned events, NiceHash reserves the right to immediately suspend your NiceHash Account, freeze or block the funds in the NiceHash Wallet, and suspend your access to NiceHash Platform, particularly if NiceHash believes that such NiceHash Account are in violation of these Terms or Privacy Policy, or any applicable laws and regulation. RIGHTS AND OBLIGATIONS In the event of disputes with you, NiceHash is obliged to prove that the NiceHash service which is the subject of the dispute was not influenced by technical or other failure. You will have possibility to check at any time, subject to technical availability, the transactions details, statistics and available balance of the funds held on the NiceHash Wallet, through access to the NiceHash Account. You may not obtain or attempt to obtain any materials or information through any means not intentionally made available or provided to you or public through the NiceHash Platform or Mining Services. We may, in our sole discretion, at any time, for any or no reason and without liability to you, with prior notice (i) terminate all rights and obligations between you and NiceHash derived from these Terms, (ii) suspend your access to all or a portion of NiceHash Services, NiceHash Wallet and its related services or any portion thereof and delete or deactivate your NiceHash Account and all related information and files in such account (iii) modify, suspend or discontinue, temporarily or permanently, any portion of NiceHash Platform or (iv) provide enhancements or improvements to the features and functionality of the NiceHash Platform, which may include patches, bug fixes, updates, upgrades and other modifications. Any such change may modify or delete certain portion, features or functionalities of the NiceHash Services. You agree that NiceHash has no obligation to (i) provide any updates, or (ii) continue to provide or enable any particular portion, features or functionalities of the NiceHash Services to you. You further agree that all changes will be (i) deemed to constitute an integral part of the NiceHash Platform, and (ii) subject to these Terms. In the event of your breach of these Terms, including but not limited to, for instance, in the event that you breach any term of these Terms, due to legal grounds originating in anti-money laundering and know your client regulation and procedures, or any other relevant applicable regulation, all right and obligations between you and NiceHash derived from these Terms terminate automatically if you fail to comply with these Terms within the notice period of 8 days after you have been warned by NiceHash about the breach and given 8 days period to cure the breaches. NiceHash reserves the right to keep these rights and obligations in force despite your breach of these Terms. In the event of termination, NiceHash will attempt to return you any funds stored on your NiceHash Wallet not otherwise owed to NiceHash, unless NiceHash believes you have committed fraud, negligence or other misconduct. You acknowledge that the NiceHash Services and NiceHash Wallet may be suspended for maintenance. Technical information about the hashing power transactions, including information about chosen server locations, algorithms used, selected mining pools, your business or activities, including all financial and technical information, specifications, technology together with all details of prices, current transaction performance and future business strategy represent confidential information and trade secrets. NiceHash shall, preserve the confidentiality of all before mentioned information and shall not disclose or cause or permit to be disclosed without your permission any of these information to any person save to the extent that such disclosure is strictly to enable you to perform or comply with any of your obligations under these Terms, or to the extent that there is an irresistible legal requirement on you or NiceHash to do so; or where the information has come into the public domain otherwise than through a breach of any of the terms of these Terms. NiceHash shall not be entitled to make use of any of these confidential information and trade secrets other than during the continuance of and pursuant to these Terms and then only for the purpose of carrying out its obligations pursuant to these Terms. NICEHASH MINER LICENSE (NICEHASH MINING SOFTWARE LICENSE) NiceHash Mining Software whether on disk, in read only memory, or any other media or in any other form is licensed, not sold, to you by NiceHash for use only under these Terms. NiceHash retains ownership of the NiceHash Mining Software itself and reserves all rights not expressly granted to you. Subject to these Terms, you are granted a limited, non-transferable, non-exclusive and a revocable license to download, install and use the NiceHash Mining Software. You may not distribute or make the NiceHash Mining Software available over a network where it could be used by multiple devices at the same time. You may not rent, lease, lend, sell, redistribute, assign, sublicense host, outsource, disclose or otherwise commercially exploit the NiceHash Mining Software or make it available to any third party. There is no license fee for the NiceHash Mining Software. NiceHash reserves the right to change the license fee policy according to the provisions to change these Terms any time and for any reason, including to decide to start charging the license fee for the NiceHash Mining Software. You are responsible for any and all applicable taxes. You may not, and you agree not to or enable others to, copy, decompile, reverse engineer, reverse compile, disassemble, attempt to derive the source code of, decrypt, modify, or create derivative works of the NiceHash Mining Software or any services provided by the NiceHash Mining Software, or any part thereof (except as and only to the extent any foregoing restriction is prohibited by applicable law or to the extent as may be permitted by the licensing terms governing use of open-sourced components included with the NiceHash Mining Software). If you choose to allow automatic updates, your device will periodically check with NiceHash for updates and upgrades to the NiceHash Mining Software and, if an update or upgrade is available, the update or upgrade will automatically download and install onto your device and, if applicable, your peripheral devices. You can turn off the automatic updates altogether at any time by changing the automatic updates settings found within the NiceHash Mining Software. You agree that NiceHash may collect and use technical and related information, including but not limited to technical information about your computer, system and application software, and peripherals, that is gathered periodically to facilitate the provision of software updates, product support and other services to you (if any) related to the NiceHash Mining Software and to verify compliance with these Terms. NiceHash may use this information, as long as it is in a form that does not personally identify you, to improve our NiceHash Services. NiceHash Mining Software contains features that rely upon information about your selected mining pools. You agree to our transmission, collection, maintenance, processing, and use of all information obtained from you about your selected mining pools. You can opt out at any time by going to settings in the NiceHash Mining Software. NiceHash may provide interest-based advertising to you. If you do not want to receive relevant ads in the NiceHash Mining Software, you can opt out at any time by going to settings in the NiceHash Mining Software. If you opt out, you will continue to receive the same number of ads, but they may be less relevant because they will not be based on your interest. NiceHash Mining Software license is effective until terminated. All provisions of these Terms regarding the termination apply also for the NiceHash Mining Software license. Upon the termination of NiceHash Mining Software license, you shall cease all use of the NiceHash Mining Software and destroy or delete all copies, full or partial, of the NiceHash Mining Software. THIRD PARTY MINERS AND PLUGINS Third Party Miners and Plugins are a third party software which enables the best and most efficient mining operations. NiceHash Miner integrates third party mining software using a third party miner plugin system. Third Party Mining Software is a closed source software which supports mining algorithms for cryptocurrencies and can be integrated into NiceHash Mining Software. Third Party Miner Plugin enables the connection between NiceHash Mining Software and Third Party Mining Software and it can be closed, as well as open sourced. NiceHash Mining Software user interface enables the user to manually select which available Third Party Miners and Plugins will be downloaded and integrated. Users can select or deselect Third Party Miners and Plugins found in the Plugin Manager window. Some of the available Third Party Miners and Plugins which are most common are preselected by NiceHash, but can be deselected, depending on users' needs. The details of the Third Party Miners and Plugins available for NiceHash Mining Software are accessible within the NiceHash Mining Software user interface. The details include, but not limited to, the author of the software and applicable license information, if applicable information about developer fee for Third Party Miners, software version etc. Developer fees may apply to the use of Third Party Miners and Plugins. NiceHash will not be liable, to the maximum extent permitted by applicable law, for any damages of any kind, including, but not limited to, direct, consequential, incidental, special or indirect damages, arising out of using Third Party Miners and Plugins. The latter includes, but is not limited to: i) any power outages, maintenance, defects, system failures, mistakes, omissions, errors, defects, viruses, delays in operation or transmission or any failure of performance; ii) any unauthorized access, alteration, deletion, destruction, damage, loss or failure to store any data, including records, private key or other credentials, associated with usage of Third Party Miners and Plugins and ii) Force Majeure Event, communications failure, theft or other interruptions. If you choose to allow automatic updates, your device will periodically check with NiceHash for updates and upgrades to the installed Third Party Miners and Plugins, if an update or upgrade is available, the update or upgrade will automatically download and install onto your device and, if applicable, your peripheral devices. You can turn off the automatic updates altogether at any time by changing the automatic updates settings found within the NiceHash Mining Software. NICEHASH QUICKMINER NiceHash QuickMiner is a software application that allows the visitors of the NiceHash Quick Miner web page, accessible athttps://www.nicehash.com/quick-miner, to connect their PC or a mining rig to the NiceHash Hashing Power Marketplace. Visitors of the NiceHash Quick Miner web page can try out and experience crypto currency mining without having to register on the NiceHash Platform and create a NiceHash Account. Users are encouraged to do so as soon as possible in order to collect the funds earned using NiceHash Quick Miner. Users can download NiceHash QuickMiner free of charge. In order to operate NiceHash QuickMiner software needs to automatically detect technical information about users' computer hardware. You agree that NiceHash may collect and use technical and related information. For more information please refer to NiceHash Privacy Policy. Funds arising from the usage of NiceHash QuickMiner are transferred to a dedicated cryptocurrency wallet owned and managed by NiceHash. NiceHash QuickMiner Users expressly agree and acknowledge that completing the registration process and creating a NiceHash Account is necessary in order to collect the funds arising from the usage of NiceHash QuickMiner. Users of NiceHash QuickMiner who do not successfully register a NiceHash Account will lose their right to claim funds arising from their usage of NiceHash QuickMiner. Those funds, in addition to the condition that the user has not been active on the NiceHash QuickMiner web page for consecutive 7 days, will be donated to the charity of choice. NICEHASH PRIVATE ENDPOINT NiceHash Private Endpoint is a network interface that connects users privately and securely to NiceHash Stratum servers. Private Endpoint uses a private IP address and avoids additional latency caused by DDOS protection. All NiceHash Private Mining Proxy servers are managed by NiceHash and kept up-to-date. Users can request a dedicated private access endpoint by filling in the form for NiceHash Private Endpoint Solution available at the NiceHash Platform. In the form the user specifies the email address, country, number of connections and locations and algorithms used. Based on the request NiceHash prepares an individualized offer based on the pricing stipulated on the NiceHash Platform, available at https://www.nicehash.com/private-endpoint-solution. NiceHash may request additional information from the users of the Private Endpoint Solution in order to determine whether we are obligated to collect VAT from you, including your VAT identification number. INTELLECTUAL PROPERTY NiceHash retains all copyright and other intellectual property rights, including inventions, discoveries, knowhow, processes, marks, methods, compositions, formulae, techniques, information and data, whether or not patentable, copyrightable or protectable in trademark, and any trademarks, copyrights or patents based thereon over all content and other materials contained on NiceHash Platform or provided in connection with the Services, including, without limitation, the NiceHash logo and all designs, text, graphics, pictures, information, data, software, source code, as well as the compilation thereof, sound files, other files and the selection and arrangement thereof. This material is protected by international copyright laws and other intellectual property right laws, namely trademark. These Terms shall not be understood and interpreted in a way that they would mean assignment of copyright or other intellectual property rights, unless it is explicitly defined so in these Terms. NiceHash hereby grants you a limited, nonexclusive and non-sublicensable license to access and use NiceHash’s copyrighted work and other intellectual property for your personal or internal business use. Such license is subject to these Terms and does not permit any resale, the distribution, public performance or public display, modifying or otherwise making any derivative uses, use, publishing, transmission, reverse engineering, participation in the transfer or sale, or any way exploit any of the copyrighted work and other intellectual property other than for their intended purposes. This granted license will automatically terminate if NiceHash suspends or terminates your access to the Services, NiceHash Wallet or closes your NiceHash Account. NiceHash will own exclusive rights, including all intellectual property rights, to any feedback including, but not limited to, suggestions, ideas or other information or materials regarding NiceHash Services or related products that you provide, whether by email, posting through our NiceHash Platform, NiceHash Account or otherwise and you irrevocably assign any and all intellectual property rights on such feedback unlimited in time, scope and territory. Any Feedback you submit is non-confidential and shall become the sole property of NiceHash. NiceHash will be entitled to the unrestricted use, modification or dissemination of such feedback for any purpose, commercial or otherwise, without acknowledgment or compensation to you. You waive any rights you may have to the feedback. We have the right to remove any posting you make on NiceHash Platform if, in our opinion, your post does not comply with the content standards defined by these Terms. PRIVACY POLICY Please refer to our NiceHash Platform and Mining Services Privacy Policy published on the NiceHash Platform for information about how we collect, use and share your information, as well as what options do you have with regards to your personal information. COMMUNICATION AND SUPPORT You agree and consent to receive electronically all communications, agreements, documents, receipts, notices and disclosures that NiceHash provides in connection with your NiceHash Account or use of the NiceHash Platform and Services. You agree that NiceHash may provide these communications to you by posting them via the NiceHash Account or by emailing them to you at the email address you provide. You should maintain copies of electronic communications by printing a paper copy or saving an electronic copy. It is your responsibility to keep your email address updated in the NiceHash Account so that NiceHash can communicate with you electronically. You understand and agree that if NiceHash sends you an electronic communication but you do not receive it because your email address is incorrect, out of date, blocked by your service provider, or you are otherwise unable to receive electronic communications, it will be deemed that you have been provided with the communication. You can update your NiceHash Account preferences at any time by logging into your NiceHash Account. If your email address becomes invalid such that electronic communications sent to you by NiceHash are returned, NiceHash may deem your account to be inactive and close it. You may give NiceHash a notice under these Terms by sending an email to support@nicehash.com or contact NiceHash through support located on the NiceHash Platform. All communication and notices pursuant to these Terms must be given in English language. FEES Please refer to the NiceHash Platform for more information about the fees or administrative costs which are applicable at the time of provision of services. NiceHash reserves the right to change these fees according to the provisions to change these Terms at any time for any reason. The changed fees will apply only for the Services provided after the change of the fees. You authorize us, or our designated payment processor, to charge or deduct your NiceHash Account for any applicable fees in connection with the transactions completed via the Services. TAX It is your responsibility to determine what, if any, taxes apply to the transactions you complete or services you provide via the NiceHash Platform, Mining Services and NiceHash Wallet, it is your responsibility to report and remit the correct tax to the appropriate tax authority and all your factual and potential tax obligations are your concern. You agree that NiceHash is not in any case and under no conditions responsible for determining whether taxes apply to your transactions or services or for collecting, reporting, withholding or remitting any taxes arising from any transactions or services. You also agree that NiceHash is not in any case and under no conditions bound to compensate for your tax obligation or give you any advice related to tax issues. All fees and charges payable by you to NiceHash are exclusive of any taxes, and shall certain taxes be applicable, they shall be added on top of the payable amounts. Upon our request, you will provide to us any information that we reasonably request to determine whether we are obligated to collect VAT from you, including your VAT identification number. If any deduction or withholding is required by law, you will notify NiceHash and will pay NiceHash any additional amounts necessary to ensure that the net amount received by NiceHash, after any deduction and withholding, equals the amount NiceHash would have received if no deduction or withholding had been required. Additionally, you will provide NiceHash with documentation showing that the withheld and deducted amounts have been paid to the relevant taxing authority. FINAL PROVISIONS Natural persons and legal entities that are not capable of holding legal rights and obligations are not allowed to create NiceHash Account and use NiceHash Platform or other related services. If NiceHash becomes aware that such natural person or legal entity has created the NiceHash Account or has used NiceHash Services, NiceHash will delete such NiceHash Account and disable any Services and block access to NiceHash Account and NiceHash Services to such natural person or legal entity. If you register to use the NiceHash Services on behalf of a legal entity, you represent and warrant that (i) such legal entity is duly organized and validly existing under the applicable laws of the jurisdiction of its organization; and (ii) you are duly authorized by such legal entity to act on its behalf. These Terms do not create any third-party beneficiary rights in any individual or entity. These Terms forms the entire agreement and understanding relating to the subject matter hereof and supersede any previous and contemporaneous agreements, arrangements or understandings relating to the subject matter hereof to the exclusion of any terms implied by law that may be excluded by contract. If at any time any provision of these Terms is or becomes illegal, invalid or unenforceable, the legality, validity and enforceability of every other provisions will not in any way be impaired. Such illegal, invalid or unenforceable provision of these Terms shall be deemed to be modified and replaced by such legal, valid and enforceable provision or arrangement, which corresponds as closely as possible to our and your will and business purpose pursued and reflected in these Terms. Headings of sections are for convenience only and shall not be used to limit or construe such sections. No failure to enforce nor delay in enforcing, on our side to the Terms, any right or legal remedy shall function as a waiver thereof, nor shall any individual or partial exercise of any right or legal remedy prevent any further or other enforcement of these rights or legal remedies or the enforcement of any other rights or legal remedies. NiceHash reserves the right to make changes, amendments, supplementations or modifications from time to time to these Terms including but not limited to changes of licence agreement for NiceHash Mining Software and of any fees and compensations policies, in its sole discretion and for any reason. We suggest that you review these Terms periodically for changes. If we make changes to these Terms, we will provide you with notice of such changes, such as by sending an email, providing notice on the NiceHash Platform, placing a popup window after login to the NiceHash Account or by posting the amended Terms on the NiceHash Platform and updating the date at the top of these Terms. The amended Terms will be deemed effective immediately upon posting for any new users of the NiceHash Services. In all other cases, the amended Terms will become effective for preexisting users upon the earlier of either: (i) the date users click or press a button to accept such changes in their NiceHash Account, or (ii) continued use of NiceHash Services 30 days after NiceHash provides notice of such changes. Any amended Terms will apply prospectively to use of the NiceHash Services after such changes become effective. The notice of change of these Terms is considered as notice of termination of all rights and obligations between you and NiceHash derived from these Terms with notice period of 30 days, if you do not accept the amended Terms. If you do not agree to any amended Terms, (i) the agreement between you and NiceHash is terminated by expiry of 30 days period which starts after NiceHash provides you a notice of change of these Terms, (ii) you must discontinue using NiceHash Services and (iii) you must inform us regarding your disagreement with the changes and request closure of your NiceHash Account. If you do not inform us regarding your disagreement and do not request closure of you NiceHash Account, we will deem that you agree with the changed Terms. You may not assign or transfer your rights or obligations under these Terms without the prior written consent of NiceHash. NiceHash may assign or transfer any or all of its rights under these Terms, in whole or in part, without obtaining your consent or approval. These Terms shall be governed by and construed and enforced in accordance with the Laws of the British Virgin Islands, and shall be interpreted in all respects as a British Virgin Islands contract. Any transaction, dispute, controversy, claim or action arising from or related to your access or use of the NiceHash Platform or these Terms of Service likewise shall be governed by the Laws of the British Virgin Islands, exclusive of choice-of-law principles. The rights and remedies conferred on NiceHash by, or pursuant to, these Terms are cumulative and are in addition, and without prejudice, to all other rights and remedies otherwise available to NiceHash at law. NiceHash may transfer its rights and obligations under these Terms to other entities which include, but are not limited to H-BIT, d.o.o. and NICEX Ltd, or any other firm or business entity that directly or indirectly acquires all or substantially all of the assets or business of NICEHASH Ltd. If you do not consent to any transfer, you may terminate this agreement and close your NiceHash Account. These Terms are not boilerplate. If you disagree with any of them, believe that any should not apply to you, or wish to negotiate these Terms, please contact NiceHash and immediately navigate away from the NiceHash Platform. Do not use the NiceHash Mining Services, NiceHash Wallet or other related services until you and NiceHash have agreed upon new terms of service. Last updated: March 1, 2021
nyaundid / EC2 AWS AND SHELLSEIS 665 Assignment 2: Linux & Git Overview This week we will focus on becoming familiar with launching a Linux server and working with some basic Linux and Git commands. We will use AWS to launch and host the Linux server. AWS might seem a little confusing at this point. Don’t worry, we will gain much more hands-on experience with AWS throughout the course. The goal is to get you comfortable working with the technology and not overwhelm you with all the details. Requirements You need to have a personal AWS account and GitHub account for this assignment. You should also read the Git Hands-on Guide and Linux Hands-on Guide before beginning this exercise. A word about grading One of the key DevOps practices we learn about in this class is the use of automation to increase the speed and repeatability of processes. Automation is utilized during the assignment grading process to review and assess your work. It’s important that you follow the instructions in each assignment and type in required files and resources with the proper names. All names are case sensitive, so a name like "Web1" is not the same as "web1". If you misspell a name, use the wrong case, or put a file in the wrong directory location you will lose points on your assignment. This is the easiest way to lose points, and also the most preventable. You should always double-check your work to make sure it accurately reflects the requirements specified in the assignment. You should always carefully review the content of your files before submitting your assignment. The assignment Let’s get started! Create GitHub repository The first step in the assignment is to setup a Git repository on GitHub. We will use a special solution called GitHub Classroom for this course which automates the process of setting up student assignment repositories. Here are the basic steps: Click on the following link to open Assignment 2 on the GitHub Classroom site: https://classroom.github.com/a/K4zcVmX- (Links to an external site.)Links to an external site. Click on the Accept this assignment button. GitHub Classroom will provide you with a URL (https) to access the assignment repository. Either copy this address to your clipboard or write it down somewhere. You will need to use this address to set up the repository on a Linux server. Example: https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git At this point your new repository to ready to use. The repository is currently empty. We will put some content in there soon! Launch Linux server The second step in the assignment is to launch a Linux server using AWS EC2. The server should have the following characteristics: Amazon Linux 2 AMI 64-bit (usually the first option listed) Located in a U.S. region (us-east-1) t2.micro instance type All default instance settings (storage, vpm, security group, etc.) I’ve shown you how to launch EC2 instances in class. You can review it on Canvas. Once you launch the new server, it may take a few minutes to provision. Log into server The next step is to log into the Linux server using a terminal program with a secure shell (SSH) support. You can use iTerm2 (Links to an external site.)Links to an external site. on a Mac and GitBash/PuTTY (Links to an external site.)Links to an external site. on a PC. You will need to have the private server key and the public IP address before attempting to log into the server. The server key is basically your password. If you lose it, you will need to terminate the existing instance and launch a new server. I recommend reusing the same key when launching new servers throughout the class. Note, I make this recommendation to make the learning process easier and not because it is a common security practice. I’ve shown you how to use a terminal application to log into the instance using a Windows desktop. Your personal computer or lab computer may be running a different OS version, but the process is still very similar. You can review the videos on the Canvas. Working with Linux If you’ve made it this far, congratulations! You’ve made it over the toughest hurdle. By the end of this course, I promise you will be able to launch and log into servers in your sleep. You should be looking at a login screen that looks something like this: Last login: Mon Mar 21 21:17:54 2016 from 174-20-199-194.mpls.qwest.net __| __|_ ) _| ( / Amazon Linux AMI ___|\___|___| https://aws.amazon.com/amazon-linux-ami/2015.09-release-notes/ 8 package(s) needed for security, out of 17 available Run "sudo yum update" to apply all updates. ec2-user@ip-172-31-15-26 ~]$ Your terminal cursor is sitting at the shell prompt, waiting for you to type in your first command. Remember the shell? It is a really cool program that lets you start other programs and manage services on the Linux system. The rest of this assignment will be spent working with the shell. Note, when you are asked to type in a command in the steps below, don’t type in the dollar-sign ($) character. This is just meant to represent the command prompt. The actual commands are represented by the characters to the right of the command prompt. Let’s start by asking the shell for some help. Type in: $ help The shell provides you with a list of commands you can run along with possible command options. Next, check out one of the pages in the built-in manual: $ man ls A man page will appear with information on how to use the ls command. This command is used to list the contents of file directories. Either space through the contents of the man page or hit q to exit. Most of the core Linux commands have man pages available. But honestly, some of these man pages are a bit hard to understand. Sometimes your best bet is to search on Google if you are trying to figure out how to use a specific command. When you initially log into Linux, the system places you in your home directory. Each user on the system has a separate home directory. Let’s see where your home directory is located: $ pwd The response should be /home/ec2-user. The pwd command is handy to remember if you ever forget what file directory you are currently located in. If you recall from the Linux Hands-on Guide, this directory is also your current working directory. Type in: $ cd / The cd command let’s you change to a new working directory on the server. In this case, we changed to the root (/) directory. This is the parent of all the other directories on the file system. Type in: $ ls The ls command lists the contents of the current directory. As you can see, root directory contains many other directories. You will become familiar with these directories over time. The ls command provides a very basic directory listing. You need to supply the command with some options if you want to see more detailed information. Type in: $ ls -la See how this command provides you with much more detailed information about the files and directories? You can use this detailed listing to see the owner, group, and access control list settings for each file or directory. Do you see any files listed? Remember, the first character in the access control list column denotes whether a listed item is a file or a directory. You probably see a couple files with names like .autofsck. How come you didn’t see this file when you typed in the lscommand without any options? (Try to run this command again to convince yourself.) Files names that start with a period are called hidden files. These files won’t appear on normal directory listings. Type in: $ cd /var Then, type in: $ ls You will see a directory listing for the /var directory. Next, type in: $ ls .. Huh. This directory listing looks the same as the earlier root directory listing. When you use two periods (..) in a directory path that means you are referring to the parent directory of the current directory. Just think of the two dots as meaning the directory above the current directory. Now, type in: $ cd ~ $ pwd Whoa. We’re back at our home directory again. The tilde character (~) is another one of those handy little directory path shortcuts. It always refers to our personal home directory. Keep in mind that since every user has their own home directory, the tilde shortcut will refer to a unique directory for each logged-in user. Most students are used to navigating a file system by clicking a mouse in nested graphical folders. When they start using a command-line to navigate a file system, they sometimes get confused and lose track of their current position in the file system. Remember, you can always use the pwd command to quickly figure out what directory you are currently working in. Let’s make some changes to the file system. We can easily make our own directories on the file system. Type: mkdir test Now type: ls Cool, there’s our new test directory. Let’s pretend we don’t like that directory name and delete it. Type: rmdir test Now it’s gone. How can you be sure? You should know how to check to see if the directory still exists at this point. Go ahead and check. Let’s create another directory. Type in: $ mkdir documents Next, change to the new directory: $ cd documents Did you notice that your command prompt displays the name of the current directory? Something like: [ec2-user@ip-172-31-15-26 documents]$. Pretty handy, huh? Okay, let’s create our first file in the documents directory. This is just an empty file for training purposes. Type in: $ touch paper.txt Check to see that the new file is in the directory. Now, go back to the previous directory. Remember the double dot shortcut? $ cd .. Okay, we don’t like our documents directory any more. Let’s blow it away. Type in: $ rmdir documents Uh oh. The shell didn’t like that command because the directory isn’t empty. Let’s change back into the documents directory. But this time don’t type in the full name of the directory. You can let shell auto-completion do the typing for you. Type in the first couple characters of the directory name and then hit the tab key: $ cd doc<tab> You should use the tab auto-completion feature often. It saves typing and makes working with the Linux file system much much easier. Tab is your friend. Now, remove the file by typing: $ rm paper.txt Did you try to use the tab key instead of typing in the whole file name? Check to make sure the file was deleted from the directory. Next, create a new file: $ touch file1 We like file1 so much that we want to make a backup copy. Type: $ cp file1 file1-backup Check to make sure the new backup copy was created. We don’t really like the name of that new file, so let’s rename it. Type: $ mv file1-backup backup Moving a file to the same directory and giving it a new name is basically the same thing as renaming it. We could have moved it to a different directory if we wanted. Let’s list all of the files in the current directory that start with the letter f: $ ls f* Using wildcard pattern matching in file commands is really useful if you want the command to impact or filter a group of files. Now, go up one directory to the parent directory (remember the double dot shortcut?) We tried to remove the documents directory earlier when it had files in it. Obviously that won’t work again. However, we can use a more powerful command to destroy the directory and vanquish its contents. Behold, the all powerful remove command: $ rm -fr documents Did you remember to use auto-completion when typing in documents? This command and set of options forcibly removes the directory and its contents. It’s a dangerous command wielded by the mightiest Linux wizards. Okay, maybe that’s a bit of an exaggeration. Just be careful with it. Check to make sure the documents directory is gone before proceeding. Let’s continue. Change to the directory /var and make a directory called test. Ugh. Permission denied. We created this darn Linux server and we paid for it. Shouldn’t we be able to do anything we want on it? You logged into the system as a user called ec2-user. While this user can create and manage files in its home directory, it cannot change files all across the system. At least it can’t as a normal user. The ec2-user is a member of the root group, so it can escalate its privileges to super-user status when necessary. Let’s try it: $ sudo mkdir test Check to make sure the directory exists now. Using sudo we can execute commands as a super-user. We can do anything we want now that we know this powerful new command. Go ahead and delete the test directory. Did you remember to use sudo before the rmdir command? Check to make sure the directory is gone. You might be asking yourself the question: why can we list the contents of the /var directory but not make changes? That’s because all users have read access to the /var directory and the ls command is a read function. Only the root users or those acting as a super-user can write changes to the directory. Let’s go back to our home directory: $ cd ~ Editing text files is a really common task on Linux systems because many of the application configuration files are text files. We can create a text file by using a text editor. Type in: $ nano myfile.conf The shell starts up the nano text editor and places your terminal cursor in the editing screen. Nano is a simple text-based word processor. Type in a few lines of text. When you’re done writing your novel, hit ctrl-x and answer y to the prompt to save your work. Finally, hit enter to save the text to the filename you specified. Check to see that your file was saved in the directory. You can take a look at the contents of your file by typing: $ cat myfile.conf The cat command displays your text file content on the terminal screen. This command works fine for displaying small text files. But if your file is hundreds of lines long, the content will scroll down your terminal screen so fast that you won’t be able to easily read it. There’s a better way to view larger text files. Type in: $ less myfile.conf The less command will page the display of a text file, allowing you to page through the contents of the file using the space bar. Your text file is probably too short to see the paging in action though. Hit q to quit out of the less text viewer. Hit the up-arrow key on your keyboard a few times until the commmand nano myfile.conf appears next to your command prompt. Cool, huh? The up-arrow key allows you to replay a previously run command. Linux maintains a list of all the commands you have run since you logged into the server. This is called the command history. It’s a really useful feature if you have to re-run a complex command again. Now, hit ctrl-c. This cancels whatever command is displayed on the command line. Type in the following command to create a couple empty files in the directory: $ touch file1 file2 file3 Confirm that the files were created. Some commands, like touch. allow you to specify multiple files as arguments. You will find that Linux commands have all kinds of ways to make tasks more efficient like this. Throughout this assignment, we have been running commands and viewing results on the terminal screen. The screen is the standard place for commands to output results. It’s known as the standard out (stdout). However, it’s really useful to output results to the file system sometimes. Type in: $ ls > listing.txt Take a look at the directory listing now. You just created a new file. View the contents of the listing.txt file. What do you see? Instead of sending the output from the ls command to the screen we sent it to a text file. Let’s try another one. Type: $ cat myfile.conf > listing.txt Take a look at the contents of the listing.txt file again. It looks like your myfile.conf file now. It’s like you made a copy of it. But what happened to the previous content in the listing.txt file? When you redirect the output of a command using the right angle-bracket character (>), the output overwrites the existing file. Type this command in: $ cat myfile.conf >> listing.txt Now look at the contents of the listing.txt file. You should see your original content displayed twice. When you use two angle-bracket characters in the commmand the output appends (or adds to) the file instead of overwriting it. We redirected the output from a command to a text file. It’s also possible to redirect the input to a command. Typically we use a keyboard to provide input, but sometimes it makes more sense to input a file to a command. For example, how many words are in your new listing.txt file? Let’s find out. Type in: $ wc -w < listing.txt Did you get a number? This command inputs the listing.txt file into a word count program called wc. Type in the command: $ ls /usr/bin The terminal screen probably scrolled quickly as filenames flashed by. The /usr/bin directory holds quite a few files. It would be nice if we could page through the contents of this directory. Well, we can. We can use a special shell feature called pipes. In previous steps, we redirected I/O using the file system. Pipes allow us to redirect I/O between programs. We can redirect the output from one program into another. Type in: $ ls /usr/bin | less Now the directory listing is paged. Hit the spacebar to page through the listing. The pipe, represented by a vertical bar character (|), takes the output from the ls command and redirects it to the less command where the resulting output is paged. Pipes are super powerful and used all the time by savvy Linux operators. Hit the q key to quit the paginated directory listing command. Working with shell scripts Now things are going to get interesting. We’ve been manually typing in commands throughout this exercise. If we were running a set of repetitive tasks, we would want to automate the process as much as possible. The shell makes it really easy to automate tasks using shell scripts. The shell provides many of the same features as a basic procedural programming language. Let’s write some code. Type in this command: $ j=123 $ echo $j We just created a variable named j referencing the string 123. The echo command printed out the value of the variable. We had to use a dollar sign ($) when referencing the variable in another command. Next, type in: $ j=1+1 $ echo $j Is that what you expected? The shell just interprets the variable value as a string. It’s not going to do any sort of computation. Typing in shell script commands on the command line is sort of pointless. We want to be able to create scripts that we can run over-and-over. Let’s create our first shell script. Use the nano editor to create a file named myscript. When the file is open in the editor, type in the following lines of code: #!/bin/bash echo Hello $1 Now quit the editor and save your file. We can run our script by typing: $ ./myscript World Er, what happened? Permission denied. Didn’t we create this file? Why can’t we run it? We can’t run the script file because we haven’t set the execute permission on the file. Type in: $ chmod u+x myscript This modifies the file access control list to allow the owner of the file to execute it. Let’s try to run the command again. Hit the up-arrow key a couple times until the ./myscript World command is displayed and hit enter. Hooray! Our first shell script. It’s probably a bit underwhelming. No problem, we’ll make it a little more complex. The script took a single argument called World. Any arguments provided to a shell script are represented as consecutively numbered variables inside the script ($1, $2, etc). Pretty simple. You might be wondering why we had to type the ./ characters before the name of our script file. Try to type in the command without them: $ myscript World Command not found. That seems a little weird. Aren’t we currently in the directory where the shell script is located? Well, that’s just not how the shell works. When you enter a command into the shell, it looks for the command in a predefined set of directories on the server called your PATH. Since your script file isn’t in your special path, the shell reports it as not found. By typing in the ./ characters before the command name you are basically forcing the shell to look for your script in the current directory instead of the default path. Create another file called cleanup using nano. In the file editor window type: #!/bin/bash # My cleanup script mkdir archive mv file* archive Exit the editor window and save the file. Change the permissions on the script file so that you can execute it. Now run the command: $ ./cleanup Take a look at the file directory listing. Notice the archive directory? List the contents of that directory. The script automatically created a new directory and moved three files into it. Anything you can do manually at a command prompt can be automated using a shell script. Let’s create one more shell script. Use nano to create a script called namelist. Here is the content of the script: #!/bin/bash # for-loop test script names='Jason John Jane' for i in $names do echo Hello $i done Change the permissions on the script file so that you can execute it. Run the command: $ ./namelist The script will loop through a set of names stored in a variable displaying each one. Scripts support several programming constructs like for-loops, do-while loops, and if-then-else. These building blocks allow you to create fairly complex scripts for automating tasks. Installing packages and services We’re nearing the end of this assignment. But before we finish, let’s install some new software packages on our server. The first thing we should do is make sure all the current packages installed on our Linux server are up-to-date. Type in: $ sudo yum update -y This is one of those really powerful commands that requires sudo access. The system will review the currently installed packages and go out to the Internet and download appropriate updates. Next, let’s install an Apache web server on our system. Type in: $ sudo yum install httpd -y Bam! You probably never knew that installing a web server was so easy. We’re not going to actually use the web server in this exercise, but we will in future assignments. We installed the web server, but is it actually running? Let’s check. Type in: $ sudo service httpd status Nope. Let’s start it. Type: $ sudo service httpd start We can use the service command to control the services running on the system. Let’s setup the service so that it automatically starts when the system boots up. Type in: $ sudo chkconfig httpd on Cool. We installed the Apache web server on our system, but what other programs are currently running? We can use the pscommand to find out. Type in: $ ps -ax Lots of processes are running on our system. We can even look at the overall performance of our system using the topcommand. Let’s try that now. Type in: $ top The display might seem a little overwhelming at first. You should see lots of performance information displayed including the cpu usage, free memory, and a list of running tasks. We’re almost across the finish line. Let’s make sure all of our valuable work is stored in a git repository. First, we need to install git. Type in the command: $ sudo yum install git -y Check your work It’s very important to check your work before submitting it for grading. A misspelled, misplaced or missing file will cost you points. This may seem harsh, but the reality is that these sorts of mistakes have consequences in the real world. For example, a server instance could fail to launch properly and impact customers because a single required file is missing. Here is what the contents of your git repository should look like before final submission: ┣archive ┃ ┣ file1 ┃ ┣ file2 ┃ ┗ file3 ┣ namelist ┗ myfile.conf Saving our work in the git repository Next, make sure you are still in your home directory (/home/ec2-user). We will install the git repository you created at the beginning of this exercise. You will need to modify this command by typing in the GitHub repository URL you copied earlier. $ git clone <your GitHub URL here>.git Example: git clone https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git The git application will ask you for your GitHub username and password. Note, if you have multi-factor authentication enabled on your GitHub account you will need to provide a personal token instead of your password. Git will clone (copy) the repository from GitHub to your Linux server. Since the repository is empty the clone happens almost instantly. Check to make sure that a sub-directory called "hw2-seis665-02-spring2019-<username>" exists in the current directory (where <username> is your GitHub account name). Git automatically created this directory as part of the cloning process. Change to the hw2-seis665-02-spring2019-<username> directory and type: $ ls -la Notice the .git hidden directory? This is where git actually stores all of the file changes in your repository. Nothing is actually in your repository yet. Change back to the parent directory (cd ..). Next, let’s move some of our files into the repository. Type: $ mv archive hw2-seis665-02-spring2019-<username> $ mv namelist hw2-seis665-02-spring2019-<username> $ mv myfile.conf hw2-seis665-02-spring2019-<username> Hopefully, you remembered to use the auto-complete function to reduce some of that typing. Change to the hw2-seis665-02-spring2019-<username> directory and list the directory contents. Your files are in the working directory, but are not actually stored in the repository because they haven’t been committed yet. Type in: $ git status You should see a list of untracked files. Let’s tell git that we want these files tracked. Type in: $ git add * Now type in the git status command again. Notice how all the files are now being tracked and are ready to be committed. These files are in the git staging area. We’ll commit them to the repository next. Type: $ git commit -m 'assignment 2 files' Next, take a look at the commit log. Type: $ git log You should see your commit listed along with an assigned hash (long string of random-looking characters). Finally, let’s save the repository to our GitHub account. Type in: $ git push origin master The git client will ask you for your GitHub username and password before pushing the repository. Go back to the GitHub.com website and login if you have been logged out. Click on the repository link for the assignment. Do you see your files listed there? Congratulations, you completed the exercise! Terminate server The last step is to terminate your Linux instance. AWS will bill you for every hour the instance is running. The cost is nominal, but there’s no need to rack up unnecessary charges. Here are the steps to terminate your instance: Log into your AWS account and click on the EC2 dashboard. Click the Instances menu item. Select your server in the instances table. Click on the Actions drop down menu above the instances table. Select the Instance State menu option Click on the Terminate action. Your Linux instance will shutdown and disappear in a few minutes. The EC2 dashboard will continue to display the instance on your instance listing for another day or so. However, the state of the instance will be terminated. Submitting your assignment — IMPORTANT! If you haven’t already, please e-mail me your GitHub username in order to receive credit for this assignment. There is no need to email me to tell me that you have committed your work to GitHub or to ask me if your GitHub submission worked. If you can see your work in your GitHub repository, I can see your work.
16Bitt / KubememA small binary to probe memory usage in a kubernetes pod
jecsham / Shorthash2Mainly based on shorthash (apparently abandoned), by Bibig, shorthash2 offers a small optimization in memory usage, small features and is available for Browser and NodeJs.
needle-mirror / Com.unity.memoryprofilerThe Memory Profiler offers a unified solution allowing you to profile both small projects on mobile devices and big AAA projects on high end machines. It provides actionable information about allocations in the engine to allow developers to manage and reduce memory usage. 📦 [Mirrored from UPM, not affiliated with Unity Technologies.]
robotty / Simple Process StatsA small Rust library to get memory usage and elapsed CPU time.
solariun / AtomicxPure C++ non stack displacement that implements cooperative multitask library for SINGLE CORE embedded development on DSPs, Microcontrollers and Processor (ARV, RISCV, ARM(all), TENSY, ESP), while also suitable for applications on Windows, Linux and MacOs and compatible with some RTOSs as well. This library allows full event driven applications while uses SMARTs LOCKS and WAIT/NOTIFY locks to also transport messages, MESSAGE BROKER is also provided (Those uses Message type size_t message and size_t tags, where tag will give meaning to the message). That implementation also introduce thread safe QUEUE (full object) and smart_ptr (to allow better implementation on minimal environment)
SE-Design / FAQ.mdNetSaver Pro ======== Please scroll down if you want to ask a question, request a feature or report a bug. Frequently Asked Questions (FAQ) -------------------------------- <a name="FAQ0"></a> **(0) How do I use NetSaver Pro?** * Enable the firewall using the switch in the action bar * Allow/deny Wi-Fi/mobile internet access using the icons along the right side of the application list You can use the settings menu to change from blacklist mode (allow all in *Settings* but block unwanted applications in list) to whitelist mode (block all in *Settings* but allow favorite applications in list). * Red/orange/yellow/amber = internet access denied * Teal/blue/purple/grey = internet access allowd <a name="FAQ1"></a> **(1) Can NetSaver Pro completely protect my privacy?** No - nothing can completely protect your privacy. NetSaver Pro will do its best, but it is limited by the fact it must use the VPN service. This is the trade-off required to make a firewall which does not require root access. The firewall can only start when Android "allows" it to start, so it will not offer protection during early boot-up (although your network may not be loaded at that time). It will, however, be much better than nothing, especially if you are not rebooting often. If you want to protect yourself more, you can (at least in theory) disable Wi-Fi and mobile data before rebooting, and only enable them on reboot, after the firewall service has started (and the small key icon is visible in the status bar). Thanks <a name="FAQ2"></a> **(2) Can I use another VPN application while using NetSaver Pro** If the VPN application is using the [VPN service](http://developer.android.com/reference/android/net/VpnService.html), then no, because NetSaver Pro needs to use this service. Android allows only one application at a time to use this service. <a name="FAQ3"></a> **(3) Can I use NetSaver Pro on any Android version?** No, the minimum required Android version is 4.0 (Lollipop) because NetSaver Pro uses the [addDisallowedApplication](http://developer.android.com/reference/android/net/VpnService.Builder.html#addDisallowedApplication(java.lang.String)) method. <a name="FAQ4"></a> **(4) Will NetSaver Pro use extra battery power?** If you didn't enable IP filtering, probably not. However, the network speed graph notification will use extra battery power. This is why the notification is shown only when the screen is on. You can decrease the update frequency using the settings to reduce the battery usage. <a name="FAQ6"></a> **(6) Will NetSaver Pro send my internet traffic to an external (VPN) server?** No, depending on the mode of operation basically one of two things will happen with your internet traffic: * When IP filtering is disabled, blocked internet traffic will be routed into the local VPN which will operate as sinkhole (in effect dropping all blocked traffic) * When IP filtering is enabled, both blocked and allowed internet traffic will be routed into the local VPN and only allowed traffic will be forwarded to the intended destination (so not to a VPN server) The [Android VPN service](http://developer.android.com/reference/android/net/VpnService.html) is being used to locally route all internet traffic to NetGuard so no root is required to build a firewall application. NetSaver Pro is unlike all other no-root firewalls applications. <a name="FAQ7"></a> **(7) Why are applications without internet permission shown?** Internet permission can be granted with each application update without user consent. By showing all applications, NetGuard allows you to control internet access even *before* such an update occurs. <a name="FAQ8"></a> **(8) What do I need to enable for the Google Play™ store app to work?** You need 3 packages (applications) enabled (use search in NetGuard to find them quickly): * com.android.vending (Play store) * com.google.android.gms (Play services) * com.android.providers.downloads (Download manager) Since the Google Play™ store app has a tendency to check for updates or even download them all by itself (even if no account is associated), one can keep it in check by enabling "*Allow when device in use*" for all 3 of these packages. Click on the down arrow on the left side of an application name and check that option, but leave the network icons set to red (hence blocked).The little human icon will appear for those packages. Note that NetSaver Pro does not require any Google service to be installed. <a name="FAQ9"></a> **(9) Why is the VPN service being restarted?** The VPN service will be restarted when you turn the screen on or off and when connectivity changes (Wi-Fi, mobile) to apply the rules with the conditions '*Allow when screen is on*' and '*Block when roaming*'. See [here](http://forum.xda-developers.com/showpost.php?p=65723629&postcount=1788) for more details. <a name="FAQ10"></a> **(10) Will you provide a Tasker plug-in?** If disabling NetSaver Pro is allowed to Tasker, any application can disabled NetSaver Pro too. Allowing to disable a security application from other applications is not a good idea. <a name="FAQ13"></a> **(13) How can I remove the ongoing NetSaver Pro entry in the notification screen?** * Long click the NetSaver Pro notification * Tap the 'i' icon * Depending on your device and/or ROMs manufacturer software customizations, you can be directed to either: * the **App Info** screen and you can uncheck '*Show notifications*' and agree to the next dialog * the **App Notifications** screen and you can toggle the '*Block*' slider to on Note that, whether or not you get a dialog warning to agree upon, this operation will disable any information or warning notifications from NetSaver Pro as well, like the new application installed notification. To read about the need for the notification in the first place, see [question 24](#FAQ24). Some Android versions display an additional notification, which might include a key icon. This notification can unfortunately not be removed. <a name="FAQ14"></a> **(14) Why can't I select OK to approve the VPN connection request?** There might be another (invisible) application on top of the VPN connection request dialog. Some known (screen dimming) applications which can cause this are *Lux Brightness*, *Night Mode* and *Twilight*. To avoid this problem, at least temporary, close all applications and/or services which may be running in the background. <a name="FAQ15"></a> **(15) Why won't you support the F-Droid builds?** Because F-Droid doesn't support reproducible builds. Read [here](https://blog.torproject.org/blog/deterministic-builds-part-one-cyberwar-and-global-compromise) why this is important. Another reason is that F-Droid builds are more often than not outdated, leaving users with an old version with known bugs. <a name="FAQ16"></a> **(16) Why are some applications shown dimmed?** Disabled applications and applications without internet permission are shown dimmed. <a name="FAQ17"></a> **(17) Why is NetSaver Pro so much memory?** It isn't, NetSaver Pro doesn't allocate any memory, except a little for displaying the user interface elements. It appeared that on some Android variants the Google Play™ store app connection, using almost 150 MB and needed for in-app donations, is incorrectly attributed to NetSaver Pro instead to the Google Play™ store app. <a name="FAQ18"></a> **(18) Why can't I findNetSaver Pro in the Google Play™ store app?** NetSaver Pro requires at least Android 4.0, so it is not available in the Google Play™ store app for devices running older Android versions. <a name="FAQ19"></a> **(19) Why does aplication XYZ still have internet access?** If you block internet access for an application, there is no way around it. However, applications could access the internet through other applications. Google Play services is handling push messages for most applications for example. You can prevent this by blocking internet access for the other application as well. Note that some applications keep trying to access the internet, which is done by sending a connection request packet. This packet goes into the VPN sinkhole when internet access for the application is blocked. This packet consists of less than 100 bytes and is counted by Android as outgoing traffic and will be visible in the speed graph notification as well. <a name="FAQ20"></a> **(20) Can I Greenify/hibernate NetGuard?** No. [Greenifying](https://play.google.com/store/apps/details?id=com.oasisfeng.greenify) or otherwise hibernating NetGuard will result in rules not being applied when connectivity changes from Wi-Fi/mobile, screen on/off and roaming/not roaming. <a name="FAQ21"></a> **(21) Does doze mode affect NNetSaver Pro?** I am not sure, because the [doze mode documentation](http://developer.android.com/training/monitoring-device-state/doze-standby.html) is not clear if the [Android VPN service](http://developer.android.com/reference/android/net/VpnService.html) will be affected. To be sure you can disable battery optimizations for NetSaver Pro manually like this: ``` Android settings > Battery > three dot menu > Battery optimizations > Dropdown > All apps > NetSaver Pro> Don't optimize > Done ``` This cannot be done from the application, because according to Google NetSaver Pro is [not an application type allowed to do this](http://developer.android.com/training/monitoring-device-state/doze-standby.html#whitelisting-cases). <a name="FAQ22"></a> **(22) Can I tether / use Wi-Fi calling while using NetGuard?** Yes, but this needs to be enabled in the settings. If it works depends on your Android version, because some Android versions have a bug preventing tethering and the VPN service to work together. Some devices hibernate Wi-Fi preventing tethering to work when the screen is off. This behavior can be disabled in the Android enhanced/advanced Wi-Fi settings. <a name="FAQ24"></a> **(24) Can you remove the notification from the status bar?** Android can kill background services at any time. This can only be prevented by turning a background service into a foreground service. Android requires an ongoing notification for all foreground services to make you aware of potential battery usage (see [question 4](#FAQ4)). So, the notification cannot be removed without causing instability. However, the notification is being marked as low priority, which should result in moving it to the bottom of the list. The key icon and/or the VPN running notification, which is shown by Android and not by NetGuard, can unfortunately not be removed. The [Google documentation](http://developer.android.com/reference/android/net/VpnService.html) says: "*A system-managed notification is shown during the lifetime of a VPN connection*". <a name="FAQ25"></a> **(25) Can you add a 'select all'?** There is no need for a select all function, because you can switch from black list to white list mode using the settings. See also [question 0](#FAQ0). <a name="FAQ27"></a> **(27) How do I read the blocked traffic log?** The columns have the following meaning: 1. Time (tap on a log entry to see the date) 1. Application icon (tap on a log entry to see the application name) 1. Application UID 1. Wi-Fi / mobile connection, green=allowed, red=blocked 1. Interactive state (screen on or off) 1. Protocol (see below) and packet flags (see below) 1. Source and destination port (tap on a log entry to lookup a destination port) 1. Source and destination IPv4 or IPv6 address (tap on a log entry to lookup a destination IP address) 1. Organization name owning the IP address (need to be enabled through the menu) Protocols: * ICMP * IGMP * ESP (IPSec) * TCP * UDP * Number = one of the protocols in [this list](https://en.wikipedia.org/wiki/List_of_IP_protocol_numbers) * 4 = IPv4 * 6 = IPv6 Packet flags: * S = SYN * A = ACK * P = PSH * F = FIN * R = RST For a detailed explanation see [here](https://en.wikipedia.org/wiki/Transmission_Control_Protocol). <a name="FAQ28"></a> **(28) Why is Google connectivity services allowed internet access by default?** The Google connectivity services system application checks if the current network is really connected to the internet. This is probably done by briefly connecting to some Google server. If this is not the case, there will be an '!' in the Wi-Fi or mobile icon in the system status bar. Recent Android versions seem not to switch connectivity from mobile to Wi-Fi when the Wi-Fi network is not really connected, even though there is a connection to the Wi-Fi network (or the other way around). On Android 6.0 and later you might get a notification asking you if you want to keep this connection on or not. To prevent a bad user experience there is a predefined rule to default allow the Google connectivity services. <a name="FAQ29"></a> **(29) Why do I get 'The item you requested is not available for purchase'?** You can only purchase pro feature when you installed NetSaver Pro from the Play store. <a name="FAQ30"></a> **(30) Can I also run AFWall+ on the same device?** Unless you are just testing NetSaver Pro, there is no current reason to use them both, since they cover the same function (firewall), although with different base needs (AFWall+ needs a rooted device) and ways of doing their thing (AFWall+ uses iptables). Also you need to keep per applicaton access rules _always_ in sync, else the application will not be able to access the network, hence bringing another level of complexity when setting and assuring things work out. Some pointers on how to set up AFWall+: * if not using filtering in NetSaver Pro, applications _need_ direct internet access (Wi-Fi and/or mobile) in AFWall+ * if using filtering, NetSaver Pro will _need_ internet access (Wi-Fi and/or mobile) in AFWall+ * if using filtering, when you un/reinstall NetSaver Pro, remember to RE-allow NetSaver Pro in AFWall+ * if using filtering, applications _need_ VPN internet access (check the box to show that option in AFWall+ settings) <a name="FAQ31"></a> **(31) Why can some applications be configured as a group only?** For a lot of purposes, including network access, Android groups applications on UID and not on package/application name. Especially system applications often have the same UID, despite having a different package and application name, these are set up like this by the ROM manufacturer at build time. These applications can only be allowed/blocked access to the internet as a group. <a name="FAQ32"></a> **(32) Why is the battery/network usage of NetSaver Pro so high?** This is because Android contributes battery and network usage which is normally contributed to other applications to NetSaver Prod in IP filtering mode. The total battery usage is slightly higher when IP filtering mode is enabled. IP filtering mode is always enabled on Android version before 5.0 and optionally enabled on later Android versions. <a name="FAQ33"></a> **(33) Can you add profiles?** Profiles are inconvenient because they need to be operated manually. Conditions like '*When screen is on*' are on the other hand convenient because they work automatic. Therefore profiles will not be added, but you are welcome to propose new conditions, however they need to be generally usable to be included. As a workaround you can use the export/import function to apply specific settings in specific circumstances. <a name="FAQ34"></a> **(34) Can you add the condition 'when on foreground'?** Recent Android versions do not allow an application to query if other applications are in the foreground or background anymore, so this cannot be added. You can use the condition '*when screen is on*' instead. <a name="FAQ35"></a> **(35) Why does the VPN not start?** NetSaver Pro "asks" Android to start the local VPN service, but some Android versions contain a bug which prevents the VPN from starting (automatically). Sometimes this is caused by updating NetSaver Pro. Unfortunately this cannot be fixed from NetSaver Pro. What you can try is to restart your device and/or revoke the VPN permissions from NetSaver Pro using the Android settings. Sometimes it helps to uninstall and install NetSaver Pro again (be sure to export your settings first). <a name="FAQ36"></a> **(36) Can you add PIN or password protection?** Since turning off the VPN service using the Android settings cannot be prevented, there is little use in adding PIN or password protection. <a name="FAQ37"></a> **(37) Why are the pro features so expensive?** The right question is "*why are there so many taxes and fees*": * VAT: 25% (depending on your country) * Google fee: 30% * Income tax: 50% So, what is left for the developer is just a fraction of what you pay. Despite NetSaver Pro being *really* a lot of work, only some of the convenience and advanced features are paid, which means that NetSaver Pro is basically free to use. Also note that most free applications will appear not to be sustainable in the end, whereas NetSaver Pro is properly maintained and supported. <br />
anujkumarthakur / Rust TutorialIntroduction Note: This edition of the book is the same as The Rust Programming Language available in print and ebook format from No Starch Press. Welcome to The Rust Programming Language, an introductory book about Rust. The Rust programming language helps you write faster, more reliable software. High-level ergonomics and low-level control are often at odds in programming language design; Rust challenges that conflict. Through balancing powerful technical capacity and a great developer experience, Rust gives you the option to control low-level details (such as memory usage) without all the hassle traditionally associated with such control. Who Rust Is For Rust is ideal for many people for a variety of reasons. Let’s look at a few of the most important groups. Teams of Developers Rust is proving to be a productive tool for collaborating among large teams of developers with varying levels of systems programming knowledge. Low-level code is prone to a variety of subtle bugs, which in most other languages can be caught only through extensive testing and careful code review by experienced developers. In Rust, the compiler plays a gatekeeper role by refusing to compile code with these elusive bugs, including concurrency bugs. By working alongside the compiler, the team can spend their time focusing on the program’s logic rather than chasing down bugs. Rust also brings contemporary developer tools to the systems programming world: Cargo, the included dependency manager and build tool, makes adding, compiling, and managing dependencies painless and consistent across the Rust ecosystem. Rustfmt ensures a consistent coding style across developers. The Rust Language Server powers Integrated Development Environment (IDE) integration for code completion and inline error messages. By using these and other tools in the Rust ecosystem, developers can be productive while writing systems-level code. Students Rust is for students and those who are interested in learning about systems concepts. Using Rust, many people have learned about topics like operating systems development. The community is very welcoming and happy to answer student questions. Through efforts such as this book, the Rust teams want to make systems concepts more accessible to more people, especially those new to programming. Companies Hundreds of companies, large and small, use Rust in production for a variety of tasks. Those tasks include command line tools, web services, DevOps tooling, embedded devices, audio and video analysis and transcoding, cryptocurrencies, bioinformatics, search engines, Internet of Things applications, machine learning, and even major parts of the Firefox web browser. Open Source Developers Rust is for people who want to build the Rust programming language, community, developer tools, and libraries. We’d love to have you contribute to the Rust language. People Who Value Speed and Stability Rust is for people who crave speed and stability in a language. By speed, we mean the speed of the programs that you can create with Rust and the speed at which Rust lets you write them. The Rust compiler’s checks ensure stability through feature additions and refactoring. This is in contrast to the brittle legacy code in languages without these checks, which developers are often afraid to modify. By striving for zero-cost abstractions, higher-level features that compile to lower-level code as fast as code written manually, Rust endeavors to make safe code be fast code as well. The Rust language hopes to support many other users as well; those mentioned here are merely some of the biggest stakeholders. Overall, Rust’s greatest ambition is to eliminate the trade-offs that programmers have accepted for decades by providing safety and productivity, speed and ergonomics. Give Rust a try and see if its choices work for you. Who This Book Is For This book assumes that you’ve written code in another programming language but doesn’t make any assumptions about which one. We’ve tried to make the material broadly accessible to those from a wide variety of programming backgrounds. We don’t spend a lot of time talking about what programming is or how to think about it. If you’re entirely new to programming, you would be better served by reading a book that specifically provides an introduction to programming. How to Use This Book In general, this book assumes that you’re reading it in sequence from front to back. Later chapters build on concepts in earlier chapters, and earlier chapters might not delve into details on a topic; we typically revisit the topic in a later chapter. You’ll find two kinds of chapters in this book: concept chapters and project chapters. In concept chapters, you’ll learn about an aspect of Rust. In project chapters, we’ll build small programs together, applying what you’ve learned so far. Chapters 2, 12, and 20 are project chapters; the rest are concept chapters. Chapter 1 explains how to install Rust, how to write a Hello, world! program, and how to use Cargo, Rust’s package manager and build tool. Chapter 2 is a hands-on introduction to the Rust language. Here we cover concepts at a high level, and later chapters will provide additional detail. If you want to get your hands dirty right away, Chapter 2 is the place for that. At first, you might even want to skip Chapter 3, which covers Rust features similar to those of other programming languages, and head straight to Chapter 4 to learn about Rust’s ownership system. However, if you’re a particularly meticulous learner who prefers to learn every detail before moving on to the next, you might want to skip Chapter 2 and go straight to Chapter 3, returning to Chapter 2 when you’d like to work on a project applying the details you’ve learned. Chapter 5 discusses structs and methods, and Chapter 6 covers enums, match expressions, and the if let control flow construct. You’ll use structs and enums to make custom types in Rust. In Chapter 7, you’ll learn about Rust’s module system and about privacy rules for organizing your code and its public Application Programming Interface (API). Chapter 8 discusses some common collection data structures that the standard library provides, such as vectors, strings, and hash maps. Chapter 9 explores Rust’s error-handling philosophy and techniques. Chapter 10 digs into generics, traits, and lifetimes, which give you the power to define code that applies to multiple types. Chapter 11 is all about testing, which even with Rust’s safety guarantees is necessary to ensure your program’s logic is correct. In Chapter 12, we’ll build our own implementation of a subset of functionality from the grep command line tool that searches for text within files. For this, we’ll use many of the concepts we discussed in the previous chapters. Chapter 13 explores closures and iterators: features of Rust that come from functional programming languages. In Chapter 14, we’ll examine Cargo in more depth and talk about best practices for sharing your libraries with others. Chapter 15 discusses smart pointers that the standard library provides and the traits that enable their functionality. In Chapter 16, we’ll walk through different models of concurrent programming and talk about how Rust helps you to program in multiple threads fearlessly. Chapter 17 looks at how Rust idioms compare to object-oriented programming principles you might be familiar with. Chapter 18 is a reference on patterns and pattern matching, which are powerful ways of expressing ideas throughout Rust programs. Chapter 19 contains a smorgasbord of advanced topics of interest, including unsafe Rust, macros, and more about lifetimes, traits, types, functions, and closures. In Chapter 20, we’ll complete a project in which we’ll implement a low-level multithreaded web server! Finally, some appendixes contain useful information about the language in a more reference-like format. Appendix A covers Rust’s keywords, Appendix B covers Rust’s operators and symbols, Appendix C covers derivable traits provided by the standard library, Appendix D covers some useful development tools, and Appendix E explains Rust editions. There is no wrong way to read this book: if you want to skip ahead, go for it! You might have to jump back to earlier chapters if you experience any confusion. But do whatever works for you. An important part of the process of learning Rust is learning how to read the error messages the compiler displays: these will guide you toward working code. As such, we’ll provide many examples that don’t compile along with the error message the compiler will show you in each situation. Know that if you enter and run a random example, it may not compile! Make sure you read the surrounding text to see whether the example you’re trying to run is meant to error. Ferris will also help you distinguish code that isn’t meant to work:
nomankhalil / GitHub Desktop Overview Release Notes Help Release Notes For Windows View Release Notes For MaGitHub Desktop Overview Release Notes | Help Release Notes for Windows View release notes for Mac 2016/09/22v3.3.3 Chocolate-Covered Yaks UPDATEDGit Shell updated to v2.10.2 2016/09/22v3.3.2 Chocolate-Covered Yaks UPDATEDGit Shell updated to v2.10.1 which updates Curl to 7.50.3 and fixes some issues working with repositories over HTTPS with domains that use self-signed certificates. FIXEDUnable to resize the app to a width of 1024. 2016/09/22v3.3.1 Chocolate-Covered Yaks UPDATEDForce usage of TLS 1.2 when the client supports the protocol. 2016/09/06v3.3.0 Chocolate-Covered Yaks UPDATEDGit Shell updated to v2.10 which includes major performance improvements to interactive rebase among other enhancements. UPDATEDGit LFS updated to v1.3.1. FIXEDDpi scaling on Windows 10 Anniversary Edition caused blurry fonts. 2016/07/26v3.2.0 War on Emus ADDEDNew button to open a repository in Atom or Visual Studio. UPDATEDGit Shell updated to v2.9.0.1. IMPROVEDBetter error message when publishing a repository that already exists on the server. FIXEDCrash due to an unhandled COMException thrown by the default text input spellchecker 2016/05/06v3.1.1 Oh Darth, Where Art Thou? FIXEDCrash when using a Windows theme with drop shadows enabled. 2016/05/04v3.1.0 Oh Darth, Where Art Thou? NEWDark theme now available from Options menu. ADDEDIcons indicating whether a file was added, removed or modified. FIXEDUnable to add repository which exists at drive root. FIXEDCrash due to incorrect handling of input arguments on launch. FIXEDCrash due to COM exception when interacting with Taskbar. FIXEDCrash when scanning filesystem for local repositories. FIXEDCreated SSH keys not added to ssh-agent on first launch. FIXEDCrash due to decoding malformed parameters on restart. UPDATEDPosh-Git now includes new icons in prompt. UPDATEDGit Shell updated to v2.8.1. UPDATEDGit LFS updated to v1.2.0. UPDATEDGit Shell adds Visual Studio 2015 developer tools and other common tools to $PATH. 2016/03/31v3.0.17 Proctional Fungramming FIXEDCrash when updating the Windows taskbar with information but the taskbar is not ready or not found. 2016/03/24v3.0.16 Proctional Fungramming FIXEDExcessive memory allocations in large repositories that caused out of memory errors. FIXEDCommit selection would stop working if one commit failed to load. FIXEDVarious memory and performance improvements. UPDATEDGit Shell updated to v2.7.4. 2016/03/15v3.0.15 Proctional Fungramming IMPROVEDReduced memory consumption when pruning merged branches. IMPROVEDReduced memory consumption by requesting smaller avatars. 2016/03/03v3.0.14 Proctional Fungramming FIXEDPosh-Git update does not work for users running Powershell v2. 2016/03/02v3.0.13 Proctional Fungramming ADDEDIssue suggestions when creating commit messages by pressing the # key. UPDATEDGit Shell updated to v2.7.1. UPDATEDPosh-Git now includes new icons in prompt FIXEDCrash when trying to rapidly load diffs for multiple Git-LFS files. IMPROVEDLocal branches that have been merged into the default branch are automatically pruned. IMPROVEDArrow keys and Page Up/Down can can be used to scroll through diffs. 2016/01/22v3.0.12 Only You Can Shave Yakkind FIXEDUpdated Authenticode certificate to replace obsolete SHA1 certificate. FIXEDRare crash when hovering over commit graph. 2015/12/17v3.0.11 No Type Remains FIXEDUnable to view diffs in LFS-enabled repositories 2015/12/16v3.0.10 One Type Remains IMPROVEDCTRL + ~ opens Git Shell in addition to ~. IMPROVEDCTRL + Enter creates a PR when used within the pull request panel. IMPROVEDUpdated Git LFS to v1.1.0. FIXEDCloning large Git LFS-enabled repositories would fail when exceeding one hour. FIXEDRare crash when saving git attributes in repository settings. FIXEDExtracting Git shell components could fail when using certain anti-virus programs. FIXEDGit LFS accessible when launching using shell.ps1 2015/11/25v3.0.9 Totally Texas FIXEDGit Shell would load incorrect assembly, impacting git-remote-https operations. 2015/11/24v3.0.8 Totally Texas UPDATEDGit command line updated to v2.5. FIXEDDiff generation failed for specific scenarios. FIXEDAvatars disappearing when switching repositories. FIXEDTutorial would get automatically selected on start up until completed or removed. FIXEDRepository list lost focus while using keyboard navigation due to automatic focusing of commit title. FIXEDRare crash when hovering over a commit in the graph. FIXEDGit LFS attributes created in repository settings now match those creating using the CLI. 2015/10/29v3.0.7 Never Gonna Git You Up IMPROVEDAuto focus commit summary when switching to changes tab. FIXEDError rendering diffs for modified renamed files. FIXEDWrong changelog showing for users on the beta program. FIXEDCrash when attempting to show diff for large file storage assets. FIXEDCloning GitHub wikis using the 'Clone in Desktop' button. UPDATEDGit LFS updated to v1.0.2 2015/10/09v3.0.6 Berge Mase ADDEDFrom the Git Shell, you can now open the GitHub Desktop application to a specific repository from the command line by passing the path to the repository to github.exe. FIXEDLogging in on multiple machines could cause other sessions to be revoked. FIXEDComparison graph sometimes showed the wrong current branch. FIXEDFailing to load the correct commits when scrolling in the history tab. FIXEDRare crash when account transitioned between authenticated and unauthenticated. FIXEDTutorial repository showing after opening settings, about or option view. IMPROVEDNew tab header styles. IMPROVEDQuick sign in from clone dialog when not authenticated. IMPROVEDHelpful messaging when failing to push to, or delete, a protected branch. IMPROVEDMore detailed messaging when failing to render a diff. IMPROVEDLong branch names are now truncated in repository view and menus. IMPROVEDDisabled buttons in comparison graph no longer have hover states. 2015/09/08v3.0.5 Realtime Baking ADDEDEasily switch between Changes and History using the tabs. ADDEDDelete the current branch from the gear menu. IMPROVED@mentions list is refreshed more frequently. IMPROVEDReduced memory usage when browsing history. FIXEDA rare crash when accessing a repository's config file. 2015/08/24v3.0.4 The Last Free Monad IMPROVEDscrolling animations inside comparison graph. FIXEDCloning forked repository not displaying correct graph initially. FIXED'Update from {branch}' uses tracked branch if defined. FIXEDA potential crash when appending commits in history view. FIXEDPull Request tooltip showing incorrect message. FIXEDA potential crash when extracting tutorial repository. 2015/08/14v3.0.3 The Last Free Monad IMPROVEDScrolling commits is now way faster! FIXEDNew commits weren't reflected in the history. FIXEDUndoing commits weren't reflected in the history. FIXEDRemote commits were inserted at the end of the history when syncing. 2015/08/12v3.0.2 The Last Free Monad FIXEDA crash when fetching commits in rare cases. FIXEDA crash when opening the base branch popover. FIXEDA crash when failing to load files in commits. FIXEDA crash when restarting the tutorial. FIXEDChanged files appearing under the commit form. 2015/08/12v3.0.1 The Last Free Monad FIXEDA potential crash while generating the comparison graph. 2015/07/06v3.0.0 The Last Free Monad NEW'Use the comparison graph to compare two branches and keep them in sync.' Overview Release Notes | Help © 2016 GitHub, Inc. All rights reserved.
anerisheth19 / CNN MobileNet V1 Implementation On AWS FPGA Using OpenCLIncreasing the accuracy of Convolutional Neural Networks (CNNs) has become a recent research focus in computer vision applications. Smaller CNN architectures like SqueezeNet and MobileNet can demonstrate accelerated performance on FPGAs and GPUs due to smaller model size and fewer network parameters. Implementation of CNNs on accelerators have two important benefits - GPUs provide thread-level parallelism to achieve higher throughput and FPGAs offer a customizable application-specific datapath. These two reasons make these platforms better suited for convolution like operations which involve huge data. This project aims to implement one such CNN architecture, MobileNet on an Image dataset in OpenCL, thereby comparing kernel execution time and memory bandwidth usage on FPGA and GPU
ssaunier / Node Redis MonitorSmall web app to monitor a redis instance. Graphs command per seconds and memory usage.
m4vic / TinyMobileLLMon-mobile-llm is a research-style project that evaluates how well small language models (0.5B–2B parameters) run fully offline on an Android smartphone using GGUF + llama.cpp + Termux. The goal is to measure speed, memory usage, thermals, stability, and output quality across a variety of SLM architectures.
