24 skills found
SOYJUN / FTP Implement Based On UDPThe aim of this assignment is to have you do UDP socket client / server programming with a focus on two broad aspects : Setting up the exchange between the client and server in a secure way despite the lack of a formal connection (as in TCP) between the two, so that ‘outsider’ UDP datagrams (broadcast, multicast, unicast - fortuitously or maliciously) cannot intrude on the communication. Introducing application-layer protocol data-transmission reliability, flow control and congestion control in the client and server using TCP-like ARQ sliding window mechanisms. The second item above is much more of a challenge to implement than the first, though neither is particularly trivial. But they are not tightly interdependent; each can be worked on separately at first and then integrated together at a later stage. Apart from the material in Chapters 8, 14 & 22 (especially Sections 22.5 - 22.7), and the experience you gained from the preceding assignment, you will also need to refer to the following : ioctl function (Chapter 17). get_ifi_info function (Section 17.6, Chapter 17). This function will be used by the server code to discover its node’s network interfaces so that it can bind all its interface IP addresses (see Section 22.6). ‘Race’ conditions (Section 20.5, Chapter 20) You also need a thorough understanding of how the TCP protocol implements reliable data transfer, flow control and congestion control. Chapters 17- 24 of TCP/IP Illustrated, Volume 1 by W. Richard Stevens gives a good overview of TCP. Though somewhat dated for some things (it was published in 1994), it remains, overall, a good basic reference. Overview This assignment asks you to implement a primitive file transfer protocol for Unix platforms, based on UDP, and with TCP-like reliability added to the transfer operation using timeouts and sliding-window mechanisms, and implementing flow and congestion control. The server is a concurrent server which can handle multiple clients simultaneously. A client gives the server the name of a file. The server forks off a child which reads directly from the file and transfers the contents over to the client using UDP datagrams. The client prints out the file contents as they come in, in order, with nothing missing and with no duplication of content, directly on to stdout (via the receiver sliding window, of course, but with no other intermediate buffering). The file to be transferred can be of arbitrary length, but its contents are always straightforward ascii text. As an aside let me mention that assuming the file contents ascii is not as restrictive as it sounds. We can always pretend, for example, that binary files are base64 encoded (“ASCII armor”). A real file transfer protocol would, of course, have to worry about transferring files between heterogeneous platforms with different file structure conventions and semantics. The sender would first have to transform the file into a platform-independent, protocol-defined, format (using, say, ASN.1, or some such standard), and the receiver would have to transform the received file into its platform’s native file format. This kind of thing can be fairly time consuming, and is certainly very tedious, to implement, with little educational value - it is not part of this assignment. Arguments for the server You should provide the server with an input file server.in from which it reads the following information, in the order shown, one item per line : Well-known port number for server. Maximum sending sliding-window size (in datagram units). You will not be handing in your server.in file. We shall create our own when we come to test your code. So it is important that you stick strictly to the file name and content conventions specified above. The same applies to the client.in input file below. Arguments for the client The client is to be provided with an input file client.in from which it reads the following information, in the order shown, one item per line : IP address of server (not the hostname). Well-known port number of server. filename to be transferred. Receiving sliding-window size (in datagram units). Random generator seed value. Probability p of datagram loss. This should be a real number in the range [ 0.0 , 1.0 ] (value 0.0 means no loss occurs; value 1.0 means all datagrams all lost). The mean µ, in milliseconds, for an exponential distribution controlling the rate at which the client reads received datagram payloads from its receive buffer. Operation Server starts up and reads its arguments from file server.in. As we shall see, when a client communicates with the server, the server will want to know what IP address that client is using to identify the server (i.e. , the destination IP address in the incoming datagram). Normally, this can be done relatively straightforwardly using the IP_RECVDESTADDR socket option, and picking up the information using the ancillary data (‘control information’) capability of the recvmsg function. Unfortunately, Solaris 2.10 does not support the IP_RECVDESTADDR option (nor, incidentally, does it support the msg_flags option in msghdr - see p.390). This considerably complicates things. In the absence of IP_RECVDESTADDR, what the server has to do as part of its initialization phase is to bind each IP address it has (and, simultaneously, its well-known port number, which it has read in from server.in) to a separate UDP socket. The code in Section 22.6, which uses the get_ifi_info function, shows you how to do that. However, there are important differences between that code and the version you want to implement. The code of Section 22.6 binds the IP addresses and forks off a child for each address that is bound to. We do not want to do that. Instead you should have an array of socket descriptors. For each IP address, create a new socket and bind the address (and well-known port number) to the socket without forking off child processes. Creating child processes comes later, when clients arrive. The code of Section 22.6 also attempts to bind broadcast addresses. We do not want to do this. It binds a wildcard IP address, which we certainly do not want to do either. We should bind strictly only unicast addresses (including the loopback address). The get_ifi_info function (which the code in Section 22.6 uses) has to be modified so that it also gets the network masks for the IP addresses of the node, and adds these to the information stored in the linked list of ifi_info structures (see Figure 17.5, p.471) it produces. As you go binding each IP address to a distinct socket, it will be useful for later processing to build your own array of structures, where a structure element records the following information for each socket : sockfd IP address bound to the socket network mask for the IP address subnet address (obtained by doing a bit-wise and between the IP address and its network mask) Report, in a ReadMe file which you hand in with your code, on the modifications you had to introduce to ensure that only unicast addresses are bound, and on your implementation of the array of structures described above. You should print out on stdout, with an appropriate message and appropriately formatted in dotted decimal notation, the IP address, network mask, and subnet address for each socket in your array of structures (you do not need to print the sockfd). The server now uses select to monitor the sockets it has created for incoming datagrams. When it returns from select, it must use recvfrom or recvmsg to read the incoming datagram (see 6. below). When a client starts, it first reads its arguments from the file client.in. The client checks if the server host is ‘local’ to its (extended) Ethernet. If so, all its communication to the server is to occur as MSG_DONTROUTE (or SO_DONTROUTE socket option). It determines if the server host is ‘local’ as follows. The first thing the client should do is to use the modified get_ifi_info function to obtain all of its IP addresses and associated network masks. Print out on stdout, in dotted decimal notation and with an appropriate message, the IP addresses and network masks obtained. In the following, IPserver designates the IP address the client will use to identify the server, and IPclient designates the IP address the client will choose to identify itself. The client checks whether the server is on the same host. If so, it should use the loopback address 127.0.0.1 for the server (i.e. , IPserver = 127.0.0.1). IPclient should also be set to the loopback address. Otherwise it proceeds as follows: IPserver is set to the IP address for the server in the client.in file. Given IPserver and the (unicast) IP addresses and network masks for the client returned by get_ifi_info in the linked list of ifi_info structures, you should be able to figure out if the server node is ‘local’ or not. This will be discussed in class; but let me just remind you here that you should use ‘longest prefix matching’ where applicable. If there are multiple client addresses, and the server host is ‘local’, the client chooses an IP address for itself, IPclient, which matches up as ‘local’ according to your examination above. If the server host is not ‘local’, then IPclient can be chosen arbitrarily. Print out on stdout the results of your examination, as to whether the server host is ‘local’ or not, as well as the IPclient and IPserver addresses selected. Note that this manner of determining whether the server is local or not is somewhat clumsy and ‘over-engineered’, and, as such, should be viewed more in the nature of a pedagogical exercise. Ideally, we would like to look up the server IP address(es) in the routing table (see Section 18.3). This requires that a routing socket be created, for which we need superuser privilege. Alternatively, we might want to dump out the routing table, using the sysctl function for example (see Section 18.4), and examine it directly. Unfortunately, Solaris 2.10 does not support sysctl. Furthermore, note that there is a slight problem with the address 130.245.1.123/24 assigned to compserv3 (see rightmost column of file hosts, and note that this particular compserv3 address “overlaps” with the 130.245.1.x/28 addresses in that same column assigned to compserv1, compserv2 & comserv4). In particular, if the client is running on compserv3 and the server on any of the other three compservs, and if that server node is also being identified to the client by its /28 (rather than its /24) address, then the client will get a “false positive” when it tests as to whether the server node is local or not. In other words, the client will deem the server node to be local, whereas in fact it should not be considered local. Because of this, it is perhaps best simply not to use compserv3 to run the client (but it is o.k. to use it to run the server). Finally, using MSG_DONTROUTE where possible would seem to gain us efficiency, in as much as the kernel does not need to consult the routing table for every datagram sent. But, in fact, that is not so. Recall that one effect of connect with UDP sockets is that routing information is obtained by the kernel at the time the connect is issued. That information is cached and used for subsequent sends from the connected socket (see p.255). The client now creates a UDP socket and calls bind on IPclient, with 0 as the port number. This will cause the kernel to bind an ephemeral port to the socket. After the bind, use the getsockname function (Section 4.10) to obtain IPclient and the ephemeral port number that has been assigned to the socket, and print that information out on stdout, with an appropriate message and appropriately formatted. The client connects its socket to IPserver and the well-known port number of the server. After the connect, use the getpeername function (Section 4.10) to obtain IPserver and the well-known port number of the server, and print that information out on stdout, with an appropriate message and appropriately formatted. The client sends a datagram to the server giving the filename for the transfer. This send needs to be backed up by a timeout in case the datagram is lost. Note that the incoming datagram from the client will be delivered to the server at the socket to which the destination IP address that the datagram is carrying has been bound. Thus, the server can obtain that address (it is, of course, IPserver) and thereby achieve what IP_RECVDESTADDR would have given us had it been available. Furthermore, the server process can obtain the IP address (this will, of course, be IPclient) and ephemeral port number of the client through the recvfrom or recvmsg functions. The server forks off a child process to handle the client. The server parent process goes back to the select to listen for new clients. Hereafter, and unless otherwise stated, whenever we refer to the ‘server’, we mean the server child process handling the client’s file transfer, not the server parent process. Typically, the first thing the server child would be expected to do is to close all sockets it ‘inherits’ from its parent. However, this is not the case with us. The server child does indeed close the sockets it inherited, but not the socket on which the client request arrived. It leaves that socket open for now. Call this socket the ‘listening’ socket. The server (child) then checks if the client host is local to its (extended) Ethernet. If so, all its communication to the client is to occur as MSG_DONTROUTE (or SO_DONTROUTE socket option). If IPserver (obtained in 5. above) is the loopback address, then we are done. Otherwise, the server has to proceed with the following step. Use the array of structures you built in 1. above, together with the addresses IPserver and IPclient to determine if the client is ‘local’. Print out on stdout the results of your examination, as to whether the client host is ‘local’ or not. The server (child) creates a UDP socket to handle file transfer to the client. Call this socket the ‘connection’ socket. It binds the socket to IPserver, with port number 0 so that its kernel assigns an ephemeral port. After the bind, use the getsockname function (Section 4.10) to obtain IPserver and the ephemeral port number that has been assigned to the socket, and print that information out on stdout, with an appropriate message and appropriately formatted. The server then connects this ‘connection’ socket to the client’s IPclient and ephemeral port number. The server now sends the client a datagram, in which it passes it the ephemeral port number of its ‘connection’ socket as the data payload of the datagram. This datagram is sent using the ‘listening’ socket inherited from its parent, otherwise the client (whose socket is connected to the server’s ‘listening’ socket at the latter’s well-known port number) will reject it. This datagram must be backed up by the ARQ mechanism, and retransmitted in the event of loss. Note that if this datagram is indeed lost, the client might well time out and retransmit its original request message (the one carrying the file name). In this event, you must somehow ensure that the parent server does not mistake this retransmitted request for a new client coming in, and spawn off yet another child to handle it. How do you do that? It is potentially more involved than it might seem. I will be discussing this in class, as well as ‘race’ conditions that could potentially arise, depending on how you code the mechanisms I present. When the client receives the datagram carrying the ephemeral port number of the server’s ‘connection’ socket, it reconnects its socket to the server’s ‘connection’ socket, using IPserver and the ephemeral port number received in the datagram (see p.254). It now uses this reconnected socket to send the server an acknowledgment. Note that this implies that, in the event of the server timing out, it should retransmit two copies of its ‘ephemeral port number’ message, one on its ‘listening’ socket and the other on its ‘connection’ socket (why?). When the server receives the acknowledgment, it closes the ‘listening’ socket it inherited from its parent. The server can now commence the file transfer through its ‘connection’ socket. The net effect of all these binds and connects at server and client is that no ‘outsider’ UDP datagram (broadcast, multicast, unicast - fortuitously or maliciously) can now intrude on the communication between server and client. Starting with the first datagram sent out, the client behaves as follows. Whenever a datagram arrives, or an ACK is about to be sent out (or, indeed, the initial datagram to the server giving the filename for the transfer), the client uses some random number generator function random() (initialized by the client.in argument value seed) to decide with probability p (another client.in argument value) if the datagram or ACK should be discarded by way of simulating transmission loss across the network. (I will briefly discuss in class how you do this.) Adding reliability to UDP The mechanisms you are to implement are based on TCP Reno. These include : Reliable data transmission using ARQ sliding-windows, with Fast Retransmit. Flow control via receiver window advertisements. Congestion control that implements : SlowStart Congestion Avoidance (‘Additive-Increase/Multiplicative Decrease’ – AIMD) Fast Recovery (but without the window-inflation aspect of Fast Recovery) Only some, and by no means all, of the details for these are covered below. The rest will be presented in class, especially those concerning flow control and TCP Reno’s congestion control mechanisms in general : Slow Start, Congestion Avoidance, Fast Retransmit and Fast Recovery. Implement a timeout mechanism on the sender (server) side. This is available to you from Stevens, Section 22.5 . Note, however, that you will need to modify the basic driving mechanism of Figure 22.7 appropriately since the situation at the sender side is not a repetitive cycle of send-receive, but rather a straightforward progression of send-send-send-send- . . . . . . . . . . . Also, modify the RTT and RTO mechanisms of Section 22.5 as specified below. I will be discussing the details of these modifications and the reasons for them in class. Modify function rtt_stop (Fig. 22.13) so that it uses integer arithmetic rather than floating point. This will entail your also having to modify some of the variable and function parameter declarations throughout Section 22.5 from float to int, as appropriate. In the unprrt.h header file (Fig. 22.10) set : RTT_RXTMIN to 1000 msec. (1 sec. instead of the current value 3 sec.) RTT_RXTMAX to 3000 msec. (3 sec. instead of the current value 60 sec.) RTT_MAXNREXMT to 12 (instead of the current value 3) In function rtt_timeout (Fig. 22.14), after doubling the RTO in line 86, pass its value through the function rtt_minmax of Fig. 22.11 (somewhat along the lines of what is done in line 77 of rtt_stop, Fig. 22.13). Finally, note that with the modification to integer calculation of the smoothed RTT and its variation, and given the small RTT values you will experience on the cs / sbpub network, these calculations should probably now be done on a millisecond or even microsecond scale (rather than in seconds, as is the case with Stevens’ code). Otherwise, small measured RTTs could show up as 0 on a scale of seconds, yielding a negative result when we subtract the smoothed RTT from the measured RTT (line 72 of rtt_stop, Fig. 22.13). Report the details of your modifications to the code of Section 22.5 in the ReadMe file which you hand in with your code. We need to have a sender sliding window mechanism for the retransmission of lost datagrams; and a receiver sliding window in order to ensure correct sequencing of received file contents, and some measure of flow control. You should implement something based on TCP Reno’s mechanisms, with cumulative acknowledgments, receiver window advertisements, and a congestion control mechanism I will explain in detail in class. For a reference on TCP’s mechanisms generally, see W. Richard Stevens, TCP/IP Illustrated, Volume 1 , especially Sections 20.2 - 20.4 of Chapter 20 , and Sections 21.1 - 21.8 of Chapter 21 . Bear in mind that our sequence numbers should count datagrams, not bytes as in TCP. Remember that the sender and receiver window sizes have to be set according to the argument values in client.in and server.in, respectively. Whenever the sender window becomes full and so ‘locks’, the server should print out a message to that effect on stdout. Similarly, whenever the receiver window ‘locks’, the client should print out a message on stdout. Be aware of the potential for deadlock when the receiver window ‘locks’. This situation is handled by having the receiver process send a duplicate ACK which acts as a window update when its window opens again (see Figure 20.3 and the discussion about it in TCP/IP Illustrated). However, this is not enough, because ACKs are not backed up by a timeout mechanism in the event they are lost. So we will also need to implement a persist timer driving window probes in the sender process (see Sections 22.1 & 22.2 in Chapter 22 of TCP/IP Illustrated). Note that you do not have to worry about the Silly Window Syndrome discussed in Section 22.3 of TCP/IP Illustrated since the receiver process consumes ‘full sized’ 512-byte messages from the receiver buffer (see 3. below). Report on the details of the ARQ mechanism you implemented in the ReadMe file you hand in. Indeed, you should report on all the TCP mechanisms you implemented in the ReadMe file, both the ones discussed here, and the ones I will be discussing in class. Make your datagram payload a fixed 512 bytes, inclusive of the file transfer protocol header (which must, at the very least, carry: the sequence number of the datagram; ACKs; and advertised window notifications). The client reads the file contents in its receive buffer and prints them out on stdout using a separate thread. This thread sits in a repetitive loop till all the file contents have been printed out, doing the following. It samples from an exponential distribution with mean µ milliseconds (read from the client.in file), sleeps for that number of milliseconds; wakes up to read and print all in-order file contents available in the receive buffer at that point; samples again from the exponential distribution; sleeps; and so on. The formula -1 × µ × ln( random( ) ) , where ln is the natural logarithm, yields variates from an exponential distribution with mean µ, based on the uniformly-distributed variates over ( 0 , 1 ) returned by random(). Note that you will need to implement some sort of mutual exclusion/semaphore mechanism on the client side so that the thread that sleeps and wakes up to consume from the receive buffer is not updating the state variables of the buffer at the same time as the main thread reading from the socket and depositing into the buffer is doing the same. Furthermore, we need to ensure that the main thread does not effectively monopolize the semaphore (and thus lock out for prolonged periods of time) the sleeping thread when the latter wakes up. See the textbook, Section 26.7, ‘Mutexes: Mutual Exclusion’, pp.697-701. You might also find Section 26.8, ‘Condition Variables’, pp.701-705, useful. You will need to devise some way by which the sender can notify the receiver when it has sent the last datagram of the file transfer, without the receiver mistaking that EOF marker as part of the file contents. (Also, note that the last data segment could be a “short” segment of less than 512 bytes – your client needs to be able to handle this correctly somehow.) When the sender receives an ACK for the last datagram of the transfer, the (child) server terminates. The parent server has to take care of cleaning up zombie children. Note that if we want a clean closing, the client process cannot simply terminate when the receiver ACKs the last datagram. This ACK could be lost, which would leave the (child) server process ‘hanging’, timing out, and retransmitting the last datagram. TCP attempts to deal with this problem by means of the TIME_WAIT state. You should have your receiver process behave similarly, sticking around in something akin to a TIME_WAIT state in case in case it needs to retransmit the ACK. In the ReadMe file you hand in, report on how you dealt with the issues raised here: sender notifying receiver of the last datagram, clean closing, and so on. Output Some of the output required from your program has been described in the section Operation above. I expect you to provide further output – clear, well-structured, well-laid-out, concise but sufficient and helpful – in the client and server windows by means of which we can trace the correct evolution of your TCP’s behaviour in all its intricacies : information (e.g., sequence number) on datagrams and acks sent and dropped, window advertisements, datagram retransmissions (and why : dup acks or RTO); entering/exiting Slow Start and Congestion Avoidance, ssthresh and cwnd values; sender and receiver windows locking/unlocking; etc., etc. . . . . The onus is on you to convince us that the TCP mechanisms you implemented are working correctly. Too many students do not put sufficient thought, creative imagination, time or effort into this. It is not the TA’s nor my responsibility to sit staring at an essentially blank screen, trying to summon up our paranormal psychology skills to figure out if your TCP implementation is really working correctly in all its very intricate aspects, simply because the transferred file seems to be printing o.k. in the client window. Nor is it our responsibility to strain our eyes and our patience wading through a mountain of obscure, ill-structured, hyper-messy, debugging-style output because, for example, your effort-conserving concept of what is ‘suitable’ is to dump your debugging output on us, relevant, irrelevant, and everything in between.
Mdshobu / Liberty House Club Whitepaper# Liberty House Club **A Parallel Binance Chain to Enable Smart Contracts** _NOTE: This document is under development. Please check regularly for updates!_ ## Table of Contents - [Motivation](#motivation) - [Design Principles](#design-principles) - [Consensus and Validator Quorum](#consensus-and-validator-quorum) * [Proof of Staked Authority](#proof-of-staked-authority) * [Validator Quorum](#validator-quorum) * [Security and Finality](#security-and-finality) * [Reward](#reward) - [Token Economy](#token-economy) * [Native Token](#native-token) * [Other Tokens](#other-tokens) - [Cross-Chain Transfer and Communication](#cross-chain-transfer-and-communication) * [Cross-Chain Transfer](#cross-chain-transfer) * [BC to BSC Architecture](#bc-to-bsc-architecture) * [BSC to BC Architecture](#bsc-to-bc-architecture) * [Timeout and Error Handling](#timeout-and-error-handling) * [Cross-Chain User Experience](#cross-chain-user-experience) * [Cross-Chain Contract Event](#cross-chain-contract-event) - [Staking and Governance](#staking-and-governance) * [Staking on BC](#staking-on-bc) * [Rewarding](#rewarding) * [Slashing](#slashing) - [Relayers](#relayers) * [BSC Relayers](#bsc-relayers) * [Oracle Relayers](#oracle-relayers) - [Outlook](#outlook) # Motivation After its mainnet community [launch](https://www.binance.com/en/blog/327334696200323072/Binance-DEX-Launches-on-Binance-Chain-Invites-Further-Community-Development) in April 2019, [Binance Chain](https://www.binance.org) has exhibited its high speed and large throughput design. Binance Chain’s primary focus, its native [decentralized application](https://en.wikipedia.org/wiki/Decentralized_application) (“dApp”) [Binance DEX](https://www.binance.org/trade), has demonstrated its low-latency matching with large capacity headroom by handling millions of trading volume in a short time. Flexibility and usability are often in an inverse relationship with performance. The concentration on providing a convenient digital asset issuing and trading venue also brings limitations. Binance Chain's most requested feature is the programmable extendibility, or simply the [Smart Contract](https://en.wikipedia.org/wiki/Smart_contract) and Virtual Machine functions. Digital asset issuers and owners struggle to add new decentralized features for their assets or introduce any sort of community governance and activities. Despite this high demand for adding the Smart Contract feature onto Binance Chain, it is a hard decision to make. The execution of a Smart Contract may slow down the exchange function and add non-deterministic factors to trading. If that compromise could be tolerated, it might be a straightforward idea to introduce a new Virtual Machine specification based on [Tendermint](https://tendermint.com/core/), based on the current underlying consensus protocol and major [RPC](https://docs.binance.org/api-reference/node-rpc.html) implementation of Binance Chain. But all these will increase the learning requirements for all existing dApp communities, and will not be very welcomed. We propose a parallel blockchain of the current Binance Chain to retain the high performance of the native DEX blockchain and to support a friendly Smart Contract function at the same time. # Design Principles After the creation of the parallel blockchain into the Binance Chain ecosystem, two blockchains will run side by side to provide different services. The new parallel chain will be called “**Binance Smart Chain**” (short as “**BSC**” for the below sections), while the existing mainnet remains named “**Binance Chain**” (short as “**BC**” for the below sections). Here are the design principles of **BSC**: 1. **Standalone Blockchain**: technically, BSC is a standalone blockchain, instead of a layer-2 solution. Most BSC fundamental technical and business functions should be self-contained so that it can run well even if the BC stopped for a short period. 2. **Ethereum Compatibility**: The first practical and widely-used Smart Contract platform is Ethereum. To take advantage of the relatively mature applications and community, BSC chooses to be compatible with the existing Ethereum mainnet. This means most of the **dApps**, ecosystem components, and toolings will work with BSC and require zero or minimum changes; BSC node will require similar (or a bit higher) hardware specification and skills to run and operate. The implementation should leave room for BSC to catch up with further Ethereum upgrades. 3. **Staking Involved Consensus and Governance**: Staking-based consensus is more environmentally friendly and leaves more flexible option to the community governance. Expectedly, this consensus should enable better network performance over [proof-of-work](https://en.wikipedia.org/wiki/Proof_of_work) blockchain system, i.e., faster blocking time and higher transaction capacity. 4. **Native Cross-Chain Communication**: both BC and BSC will be implemented with native support for cross-chain communication among the two blockchains. The communication protocol should be bi-directional, decentralized, and trustless. It will concentrate on moving digital assets between BC and BSC, i.e., [BEP2](https://github.com/binance-chain/BEPs/blob/master/BEP2.md) tokens, and eventually, other BEP tokens introduced later. The protocol should care for the minimum of other items stored in the state of the blockchains, with only a few exceptions. # Consensus and Validator Quorum Based on the above design principles, the consensus protocol of BSC is to fulfill the following goals: 1. Blocking time should be shorter than Ethereum network, e.g. 5 seconds or even shorter. 2. It requires limited time to confirm the finality of transactions, e.g. around 1-min level or shorter. 3. There is no inflation of native token: BNB, the block reward is collected from transaction fees, and it will be paid in BNB. 4. It is compatible with Ethereum system as much as possible. 5. It allows modern [proof-of-stake](https://en.wikipedia.org/wiki/Proof_of_stake) blockchain network governance. ## Proof of Staked Authority Although Proof-of-Work (PoW) has been recognized as a practical mechanism to implement a decentralized network, it is not friendly to the environment and also requires a large size of participants to maintain the security. Ethereum and some other blockchain networks, such as [MATIC Bor](https://github.com/maticnetwork/bor), [TOMOChain](https://tomochain.com/), [GoChain](https://gochain.io/), [xDAI](https://xdai.io/), do use [Proof-of-Authority(PoA)](https://en.wikipedia.org/wiki/Proof_of_authority) or its variants in different scenarios, including both testnet and mainnet. PoA provides some defense to 51% attack, with improved efficiency and tolerance to certain levels of Byzantine players (malicious or hacked). It serves as an easy choice to pick as the fundamentals. Meanwhile, the PoA protocol is most criticized for being not as decentralized as PoW, as the validators, i.e. the nodes that take turns to produce blocks, have all the authorities and are prone to corruption and security attacks. Other blockchains, such as EOS and Lisk both, introduce different types of [Delegated Proof of Stake (DPoS)](https://en.bitcoinwiki.org/wiki/DPoS) to allow the token holders to vote and elect the validator set. It increases the decentralization and favors community governance. BSC here proposes to combine DPoS and PoA for consensus, so that: 1. Blocks are produced by a limited set of validators 2. Validators take turns to produce blocks in a PoA manner, similar to [Ethereum’s Clique](https://eips.ethereum.org/EIPS/eip-225) consensus design 3. Validator set are elected in and out based on a staking based governance ## Validator Quorum In the genesis stage, a few trusted nodes will run as the initial Validator Set. After the blocking starts, anyone can compete to join as candidates to elect as a validator. The staking status decides the top 21 most staked nodes to be the next validator set, and such an election will repeat every 24 hours. **BNB** is the token used to stake for BSC. In order to remain as compatible as Ethereum and upgradeable to future consensus protocols to be developed, BSC chooses to rely on the **BC** for staking management (Please refer to the below “[Staking and Governance](#staking-and-governance)” section). There is a **dedicated staking module for BSC on BC**. It will accept BSC staking from BNB holders and calculate the highest staked node set. Upon every UTC midnight, BC will issue a verifiable `ValidatorSetUpdate` cross-chain message to notify BSC to update its validator set. While producing further blocks, the existing BSC validators check whether there is a `ValidatorSetUpdate` message relayed onto BSC periodically. If there is, they will update the validator set after an **epoch period**, i.e. a predefined number of blocking time. For example, if BSC produces a block every 5 seconds, and the epoch period is 240 blocks, then the current validator set will check and update the validator set for the next epoch in 1200 seconds (20 minutes). ## Security and Finality Given there are more than ½\*N+1 validators are honest, PoA based networks usually work securely and properly. However, there are still cases where certain amount Byzantine validators may still manage to attack the network, e.g. through the “[Clone Attack](https://arxiv.org/pdf/1902.10244.pdf)”. To secure as much as BC, BSC users are encouraged to wait until receiving blocks sealed by more than ⅔\*N+1 different validators. In that way, the BSC can be trusted at a similar security level to BC and can tolerate less than ⅓\*N Byzantine validators. With 21 validators, if the block time is 5 seconds, the ⅔\*N+1 different validator seals will need a time period of (⅔\*21+1)*5 = 75 seconds. Any critical applications for BSC may have to wait for ⅔\*N+1 to ensure a relatively secure finality. However, besides such arrangement, BSC does introduce **Slashing** logic to penalize Byzantine validators for **double signing** or **inavailability**, which will be covered in the “Staking and Governance” section later. This Slashing logic will expose the malicious validators in a very short time and make the “Clone Attack” very hard or extremely non-beneficial to execute. With this enhancement, ½\*N+1 or even fewer blocks are enough as confirmation for most transactions. ## Reward All the BSC validators in the current validator set will be rewarded with transaction **fees in BNB**. As BNB is not an inflationary token, there will be no mining rewards as what Bitcoin and Ethereum network generate, and the gas fee is the major reward for validators. As BNB is also utility tokens with other use cases, delegators and validators will still enjoy other benefits of holding BNB. The reward for validators is the fees collected from transactions in each block. Validators can decide how much to give back to the delegators who stake their BNB to them, in order to attract more staking. Every validator will take turns to produce the blocks in the same probability (if they stick to 100% liveness), thus, in the long run, all the stable validators may get a similar size of the reward. Meanwhile, the stakes on each validator may be different, so this brings a counter-intuitive situation that more users trust and delegate to one validator, they potentially get less reward. So rational delegators will tend to delegate to the one with fewer stakes as long as the validator is still trustful (insecure validator may bring slashable risk). In the end, the stakes on all the validators will have less variation. This will actually prevent the stake concentration and “winner wins forever” problem seen on some other networks. Some parts of the gas fee will also be rewarded to relayers for Cross-Chain communication. Please refer to the “[Relayers](#relayers)” section below. # Token Economy BC and BSC share the same token universe for BNB and BEP2 tokens. This defines: 1. The same token can circulate on both networks, and flow between them bi-directionally via a cross-chain communication mechanism. 2. The total circulation of the same token should be managed across the two networks, i.e. the total effective supply of a token should be the sum of the token’s total effective supply on both BSC and BC. 3. The tokens can be initially created on BSC in a similar format as ERC20 token standard, or on BC as a BEP2, then created on the other. There are native ways on both networks to link the two and secure the total supply of the token. ## Native Token BNB will run on BSC in the same way as ETH runs on Ethereum so that it remains as “native token” for both BSC and BC. This means, in addition to BNB is used to pay most of the fees on Binance Chain and Binance DEX, BNB will be also used to: 1. pay “fees“ to deploy smart contracts on BSC 2. stake on selected BSC validators, and get corresponding rewards 3. perform cross-chain operations, such as transfer token assets across BC and BSC ### Seed Fund Certain amounts of BNB will be burnt on BC and minted on BSC during its genesis stage. This amount is called “Seed Fund” to circulate on BSC after the first block, which will be dispatched to the initial BC-to-BSC Relayer(described in later sections) and initial validator set introduced at genesis. These BNBs are used to pay transaction fees in the early stage to transfer more BNB from BC onto BSC via the cross-chain mechanism. The BNB cross-chain transfer is discussed in a later section, but for BC to BSC transfer, it is generally to lock BNB on BC from the source address of the transfer to a system-controlled address and unlock the corresponding amount from special contract to the target address of the transfer on BSC, or reversely, when transferring from BSC to BC, it is to lock BNB from the source address on BSC into a special contract and release locked amount on BC from the system address to the target address. The logic is related to native code on BC and a series of smart contracts on BSC. ## Other Tokens BC supports BEP2 tokens and upcoming [BEP8 tokens](https://github.com/binance-chain/BEPs/pull/69), which are native assets transferrable and tradable (if listed) via fast transactions and sub-second finality. Meanwhile, as BSC is Ethereum compatible, it is natural to support ERC20 tokens on BSC, which here is called “**BEP2E**” (with the real name to be introduced by the future BEPs,it potentially covers BEP8 as well). BEP2E may be “Enhanced” by adding a few more methods to expose more information, such as token denomination, decimal precision definition and the owner address who can decide the Token Binding across the chains. BSC and BC work together to ensure that one token can circulate in both formats with confirmed total supply and be used in different use cases. ### Token Binding BEP2 tokens will be extended to host a new attribute to associate the token with a BSC BEP2E token contract, called “**Binder**”, and this process of association is called “**Token Binding**”. Token Binding can happen at any time after BEP2 and BEP2E are ready. The token owners of either BEP2 or BEP2E don’t need to bother about the Binding, until before they really want to use the tokens on different scenarios. Issuers can either create BEP2 first or BEP2E first, and they can be bound at a later time. Of course, it is encouraged for all the issuers of BEP2 and BEP2E to set the Binding up early after the issuance. A typical procedure to bind the BEP2 and BEP2E will be like the below: 1. Ensure both the BEP2 token and the BEP2E token both exist on each blockchain, with the same total supply. BEP2E should have 3 more methods than typical ERC20 token standard: * symbol(): get token symbol * decimals(): get the number of the token decimal digits * owner(): get **BEP2E contract owner’s address.** This value should be initialized in the BEP2E contract constructor so that the further binding action can verify whether the action is from the BEP2E owner. 2. Decide the initial circulation on both blockchains. Suppose the total supply is *S*, and the expected initial circulating supply on BC is *K*, then the owner should lock S-K tokens to a system controlled address on BC. 3. Equivalently, *K* tokens is locked in the special contract on BSC, which handles major binding functions and is named as **TokenHub**. The issuer of the BEP2E token should lock the *K* amount of that token into TokenHub, resulting in *S-K* tokens to circulate on BSC. Thus the total circulation across 2 blockchains remains as *S*. 4. The issuer of BEP2 token sends the bind transaction on BC. Once the transaction is executed successfully after proper verification: * It transfers *S-K* tokens to a system-controlled address on BC. * A cross-chain bind request package will be created, waiting for Relayers to relay. 5. BSC Relayers will relay the cross-chain bind request package into **TokenHub** on BSC, and the corresponding request and information will be stored into the contract. 6. The contract owner and only the owner can run a special method of TokenHub contract, `ApproveBind`, to verify the binding request to mark it as a success. It will confirm: * the token has not been bound; * the binding is for the proper symbol, with proper total supply and decimal information; * the proper lock are done on both networks; 10. Once the `ApproveBind` method has succeeded, TokenHub will mark the two tokens are bounded and share the same circulation on BSC, and the status will be propagated back to BC. After this final confirmation, the BEP2E contract address and decimals will be written onto the BEP2 token as a new attribute on BC, and the tokens can be transferred across the two blockchains bidirectionally. If the ApproveBind fails, the failure event will also be propagated back to BC to release the locked tokens, and the above steps can be re-tried later. # Cross-Chain Transfer and Communication Cross-chain communication is the key foundation to allow the community to take advantage of the dual chain structure: * users are free to create any tokenization, financial products, and digital assets on BSC or BC as they wish * the items on BSC can be manually and programmingly traded and circulated in a stable, high throughput, lighting fast and friendly environment of BC * users can operate these in one UI and tooling ecosystem. ## Cross-Chain Transfer The cross-chain transfer is the key communication between the two blockchains. Essentially the logic is: 1. the `transfer-out` blockchain will lock the amount from source owner addresses into a system controlled address/contracts; 2. the `transfer-in` blockchain will unlock the amount from the system controlled address/contracts and send it to target addresses. The cross-chain transfer package message should allow the BSC Relayers and BC **Oracle Relayers** to verify: 1. Enough amount of token assets are removed from the source address and locked into a system controlled addresses/contracts on the source blockchain. And this can be confirmed on the target blockchain. 2. Proper amounts of token assets are released from a system controlled addresses/contracts and allocated into target addresses on the target blockchain. If this fails, it can be confirmed on source blockchain, so that the locked token can be released back (may deduct fees). 3. The sum of the total circulation of the token assets across the 2 blockchains are not changed after this transfer action completes, no matter if the transfer succeeds or not.  The architecture of cross-chain communication is as in the above diagram. To accommodate the 2 heteroid systems, communication handling is different in each direction. ## BC to BSC Architecture BC is a Tendermint-based, instant finality blockchain. Validators with at least ⅔\*N+1 of the total voting power will co-sign each block on the chain. So that it is practical to verify the block transactions and even the state value via **Block Header** and **Merkle Proof** verification. This has been researched and implemented as “**Light-Client Protocol**”, which are intensively discussed in [the Ethereum](https://github.com/ethereum/wiki/wiki/Light-client-protocol) community, studied and implemented for [Cosmos inter-chain communication](https://github.com/cosmos/ics/blob/a4173c91560567bdb7cc9abee8e61256fc3725e9/spec/ics-007-tendermint-client/README.md). BC-to-BSC communication will be verified in an “**on-chain light client**” implemented via BSC **Smart Contracts** (some of them may be **“pre-compiled”**). After some transactions and state change happen on BC, if a transaction is defined to trigger cross-chain communication,the Cross-chain “**package**” message will be created and **BSC Relayers** will pass and submit them onto BSC as data into the "build-in system contracts". The build-in system contracts will verify the package and execute the transactions if it passes the verification. The verification will be guaranteed with the below design: 1. BC blocking status will be synced to the light client contracts on BSC from time to time, via block header and pre-commits, for the below information: * block and app hash of BC that are signed by validators * current validatorset, and validator set update 2. the key-value from the blockchain state will be verified based on the Merkle Proof and information from above #1. After confirming the key-value is accurate and trustful, the build-in system contracts will execute the actions corresponding to the cross-chain packages. Some examples of such packages that can be created for BC-to-BSC are: 1. Bind: bind the BEP2 tokens and BEP2E 2. Transfer: transfer tokens after binding, this means the circulation will decrease (be locked) from BC and appear in the target address balance on BSC 3. Error Handling: to handle any timeout/failure event for BSC-to-BC communication 4. Validatorset update of BSC To ensure no duplication, proper message sequence and timely timeout, there is a “Channel” concept introduced on BC to manage any types of the communication. For relayers, please also refer to the below “Relayers” section. ## BSC to BC Architecture BSC uses Proof of Staked Authority consensus protocol, which has a chance to fork and requires confirmation of more blocks. One block only has the signature of one validator, so that it is not easy to rely on one block to verify data from BSC. To take full advantage of validator quorum of BC, an idea similar to many [Bridge ](https://github.com/poanetwork/poa-bridge)or Oracle blockchains is adopted: 1. The cross-chain communication requests from BSC will be submitted and executed onto BSC as transactions. The execution of the transanction wil emit `Events`, and such events can be observed and packaged in certain “**Oracle**” onto BC. Instead of Block Headers, Hash and Merkle Proof, this type of “Oracle” package directly contains the cross-chain information for actions, such as sender, receiver and amount for transfer. 2. To ensure the security of the Oracle, the validators of BC will form anothe quorum of “**Oracle Relayers**”. Each validator of the BC should run a **dedicated process** as the Oracle Relayer. These Oracle Relayers will submit and vote for the cross-chain communication package, like Oracle, onto BC, using the same validator keys. Any package signed by more than ⅔\*N+1 Oracle Relayers’ voting power is as secure as any block signed by ⅔\*N+1 of the same quorum of validators’ voting power. By using the same validator quorum, it saves the light client code on BC and continuous block updates onto BC. Such Oracles also have Oracle IDs and types, to ensure sequencing and proper error handling. ## Timeout and Error Handling There are scenarios that the cross-chain communication fails. For example, the relayed package cannot be executed on BSC due to some coding bug in the contracts. **Timeout and error handling logics are** used in such scenarios. For the recognizable user and system errors or any expected exceptions, the two networks should heal themselves. For example, when BC to BSC transfer fails, BSC will issue a failure event and Oracle Relayers will execute a refund on BC; when BSC to BC transfer fails, BC will issue a refund package for Relayer to relay in order to unlock the fund. However, unexpected error or exception may still happen on any step of the cross-chain communication. In such a case, the Relayers and Oracle Relayers will discover that the corresponding cross-chain channel is stuck in a particular sequence. After a Timeout period, the Relayers and Oracle Relayers can request a “SkipSequence” transaction, the stuck sequence will be marked as “Unexecutable”. A corresponding alerts will be raised, and the community has to discuss how to handle this scenario, e.g. payback via the sponsor of the validators, or event clear the fund during next network upgrade. ## Cross-Chain User Experience Ideally, users expect to use two parallel chains in the same way as they use one single chain. It requires more aggregated transaction types to be added onto the cross-chain communication to enable this, which will add great complexity, tight coupling, and maintenance burden. Here BC and BSC only implement the basic operations to enable the value flow in the initial launch and leave most of the user experience work to client side UI, such as wallets. E.g. a great wallet may allow users to sell a token directly from BSC onto BC’s DEX order book, in a secure way. ## Cross-Chain Contract Event Cross-Chain Contract Event (CCCE) is designed to allow a smart contract to trigger cross-chain transactions, directly through the contract code. This becomes possible based on: 1. Standard system contracts can be provided to serve operations callable by general smart contracts; 2. Standard events can be emitted by the standard contracts; 3. Oracle Relayers can capture the standard events, and trigger the corresponding cross-chain operations; 4. Dedicated, code-managed address (account) can be created on BC and accessed by the contracts on the BSC, here it is named as **“Contract Address on BC” (CAoB)**. Several standard operations are implemented: 1. BSC to BC transfer: this is implemented in the same way as normal BSC to BC transfer, by only triggered via standard contract. The fund can be transferred to any addresses on BC, including the corresponding CAoB of the transfer originating contract. 2. Transfer on BC: this is implemented as a special cross-chain transfer, while the real transfer is from **CAoB** to any other address (even another CAoB). 3. BC to BSC transfer: this is implemented as two-pass cross-chain communication. The first is triggered by the BSC contract and propagated onto BC, and then in the second pass, BC will start a normal BC to BSC cross-chain transfer, from **CAoB** to contract address on BSC. A special note should be paid on that the BSC contract only increases balance upon any transfer coming in on the second pass, and the error handling in the second pass is the same as the normal BC to BSC transfer. 4. IOC (Immediate-Or-Cancel) Trade Out: the primary goal of transferring assets to BC is to trade. This event will instruct to trade a certain amount of an asset in CAoB into another asset as much as possible and transfer out all the results, i.e. the left the source and the traded target tokens of the trade, back to BSC. BC will handle such relayed events by sending an “Immediate-Or-Cancel”, i.e. IOC order onto the trading pairs, once the next matching finishes, the result will be relayed back to BSC, which can be in either one or two assets. 5. Auction Trade Out: Such event will instruct BC to send an auction order to trade a certain amount of an asset in **CAoB** into another asset as much as possible and transfer out all the results back to BSC at the end of the auction. Auction function is upcoming on BC. There are some details for the Trade Out: 1. both can have a limit price (absolute or relative) for the trade; 2. the end result will be written as cross-chain packages to relay back to BSC; 3. cross-chain communication fees may be charged from the asset transferred back to BSC; 4. BSC contract maintains a mirror of the balance and outstanding orders on CAoB. No matter what error happens during the Trade Out, the final status will be propagated back to the originating contract and clear its internal state. With the above features, it simply adds the cross-chain transfer and exchange functions with high liquidity onto all the smart contracts on BSC. It will greatly add the application scenarios on Smart Contract and dApps, and make 1 chain +1 chain > 2 chains. # Staking and Governance Proof of Staked Authority brings in decentralization and community involvement. Its core logic can be summarized as the below. You may see similar ideas from other networks, especially Cosmos and EOS. 1. Token holders, including the validators, can put their tokens “**bonded**” into the stake. Token holders can **delegate** their tokens onto any validator or validator candidate, to expect it can become an actual validator, and later they can choose a different validator or candidate to **re-delegate** their tokens<sup>1</sup>. 2. All validator candidates will be ranked by the number of bonded tokens on them, and the top ones will become the real validators. 3. Validators can share (part of) their blocking reward with their delegators. 4. Validators can suffer from “**Slashing**”, a punishment for their bad behaviors, such as double sign and/or instability. 5. There is an “**unbonding period**” for validators and delegators so that the system makes sure the tokens remain bonded when bad behaviors are caught, the responsible will get slashed during this period. ## Staking on BC Ideally, such staking and reward logic should be built into the blockchain, and automatically executed as the blocking happens. Cosmos Hub, who shares the same Tendermint consensus and libraries with Binance Chain, works in this way. BC has been preparing to enable staking logic since the design days. On the other side, as BSC wants to remain compatible with Ethereum as much as possible, it is a great challenge and efforts to implement such logic on it. This is especially true when Ethereum itself may move into a different Proof of Stake consensus protocol in a short (or longer) time. In order to keep the compatibility and reuse the good foundation of BC, the staking logic of BSC is implemented on BC: 1. The staking token is BNB, as it is a native token on both blockchains anyway 2. The staking, i.e. token bond and delegation actions and records for BSC, happens on BC. 3. The BSC validator set is determined by its staking and delegation logic, via a staking module built on BC for BSC, and propagated every day UTC 00:00 from BC to BSC via Cross-Chain communication. 4. The reward distribution happens on BC around every day UTC 00:00. ## Rewarding Both the validator update and reward distribution happen every day around UTC 00:00. This is to save the cost of frequent staking updates and block reward distribution. This cost can be significant, as the blocking reward is collected on BSC and distributed on BC to BSC validators and delegators. (Please note BC blocking fees will remain rewarding to BC validators only.) A deliberate delay is introduced here to make sure the distribution is fair: 1. The blocking reward will not be sent to validator right away, instead, they will be distributed and accumulated on a contract; 2. Upon receiving the validator set update into BSC, it will trigger a few cross-chain transfers to transfer the reward to custody addresses on the corresponding validators. The custody addresses are owned by the system so that the reward cannot be spent until the promised distribution to delegators happens. 3. In order to make the synchronization simpler and allocate time to accommodate slashing, the reward for N day will be only distributed in N+2 days. After the delegators get the reward, the left will be transferred to validators’ own reward addresses. ## Slashing Slashing is part of the on-chain governance, to ensure the malicious or negative behaviors are punished. BSC slash can be submitted by anyone. The transaction submission requires **slash evidence** and cost fees but also brings a larger reward when it is successful. So far there are two slashable cases. ### Double Sign It is quite a serious error and very likely deliberate offense when a validator signs more than one block with the same height and parent block. The reference protocol implementation should already have logic to prevent this, so only the malicious code can trigger this. When Double Sign happens, the validator should be removed from the Validator **Set** right away. Anyone can submit a slash request on BC with the evidence of Double Sign of BSC, which should contain the 2 block headers with the same height and parent block, sealed by the offending validator. Upon receiving the evidence, if the BC verifies it to be valid: 1. The validator will be removed from validator set by an instance BSC validator set update Cross-Chain update; 2. A predefined amount of BNB would be slashed from the **self-delegated** BNB of the validator; Both validator and its delegators will not receive the staking rewards. 3. Part of the slashed BNB will allocate to the submitter’s address, which is a reward and larger than the cost of submitting slash request transaction 4. The rest of the slashed BNB will allocate to the other validators’ custody addresses, and distributed to all delegators in the same way as blocking reward. ### Inavailability The liveness of BSC relies on everyone in the Proof of Staked Authority validator set can produce blocks timely when it is their turn. Validators can miss their turn due to any reason, especially problems in their hardware, software, configuration or network. This instability of the operation will hurt the performance and introduce more indeterministic into the system. There can be an internal smart contract responsible for recording the missed blocking metrics of each validator. Once the metrics are above the predefined threshold, the blocking reward for validator will not be relayed to BC for distribution but shared with other better validators. In such a way, the poorly-operating validator should be gradually voted out of the validator set as their delegators will receive less or none reward. If the metrics remain above another higher level of threshold, the validator will be dropped from the rotation, and this will be propagated back to BC, then a predefined amount of BNB would be slashed from the **self-delegated** BNB of the validator. Both validators and delegators will not receive their staking rewards. ### Governance Parameters There are many system parameters to control the behavior of the BSC, e.g. slash amount, cross-chain transfer fees. All these parameters will be determined by BSC Validator Set together through a proposal-vote process based on their staking. Such the process will be carried on BC, and the new parameter values will be picked up by corresponding system contracts via a cross-chain communication. # Relayers Relayers are responsible to submit Cross-Chain Communication Packages between the two blockchains. Due to the heterogeneous parallel chain structure, two different types of Relayers are created. ## BSC Relayers Relayers for BC to BSC communication referred to as “**BSC Relayers**”, or just simply “Relayers”. Relayer is a standalone process that can be run by anyone, and anywhere, except that Relayers must register themselves onto BSC and deposit a certain refundable amount of BNB. Only relaying requests from the registered Relayers will be accepted by BSC. The package they relay will be verified by the on-chain light client on BSC. The successful relay needs to pass enough verification and costs gas fees on BSC, and thus there should be incentive reward to encourage the community to run Relayers. ### Incentives There are two major communication types: 1. Users triggered Operations, such as `token bind` or `cross chain transfer`. Users must pay additional fee to as relayer reward. The reward will be shared with the relayers who sync the referenced blockchain headers. Besides, the reward won't be paid the relayers' accounts directly. A reward distribution mechanism will be brought in to avoid monopolization. 2. System Synchronization, such as delivering `refund package`(caused by failures of most oracle relayers), special blockchain header synchronization(header contains BC validatorset update), BSC staking package. System reward contract will pay reward to relayers' accounts directly. If some Relayers have faster networks and better hardware, they can monopolize all the package relaying and leave no reward to others. Thus fewer participants will join for relaying, which encourages centralization and harms the efficiency and security of the network. Ideally, due to the decentralization and dynamic re-election of BSC validators, one Relayer can hardly be always the first to relay every message. But in order to avoid the monopolization further, the rewarding economy is also specially designed to minimize such chance: 1. The reward for Relayers will be only distributed in batches, and one batch will cover a number of successful relayed packages. 2. The reward a Relayer can get from a batch distribution is not linearly in proportion to their number of successful relayed packages. Instead, except the first a few relays, the more a Relayer relays during a batch period, the less reward it will collect. ## Oracle Relayers Relayers for BSC to BC communication are using the “Oracle” model, and so-called “**Oracle Relayers**”. Each of the validators must, and only the ones of the validator set, run Oracle Relayers. Each Oracle Relayer watches the blockchain state change. Once it catches Cross-Chain Communication Packages, it will submit to vote for the requests. After Oracle Relayers from ⅔ of the voting power of BC validators vote for the changes, the cross-chain actions will be performed. Oracle Replayers should wait for enough blocks to confirm the finality on BSC before submitting and voting for the cross-chain communication packages onto BC. The cross-chain fees will be distributed to BC validators together with the normal BC blocking rewards. Such oracle type relaying depends on all the validators to support. As all the votes for the cross-chain communication packages are recorded on the blockchain, it is not hard to have a metric system to assess the performance of the Oracle Relayers. The poorest performer may have their rewards clawed back via another Slashing logic introduced in the future. # Outlook It is hard to conclude for Binance Chain, as it has never stopped evolving. The dual-chain strategy is to open the gate for users to take advantage of the fast transferring and trading on one side, and flexible and extendable programming on the other side, but it will be one stop along the development of Binance Chain. Here below are the topics to look into so as to facilitate the community better for more usability and extensibility: 1. Add different digital asset model for different business use cases 2. Enable more data feed, especially DEX market data, to be communicated from Binance DEX to BSC 3. Provide interface and compatibility to integrate with Ethereum, including its further upgrade, and other blockchain 4. Improve client side experience to manage wallets and use blockchain more conveniently ------ [1]: BNB business practitioners may provide other benefits for BNB delegators, as they do now for long term BNB holders.
nessry / Hybrid BeamformingThis example introduces the basic concept of hybrid beamforming and shows how to split the precoding and combining weights using orthogonal matching pursuit algorithm. It shows that hybrid beamforming can closely match the performance offered by optimal digital weights. This program simulates a 64 x 16 MIMO hybrid beamforming system, with a 64-element square array with 4 RF chains on the transmitter side and a 16-element square array with 4 RF chains on the receiver side. Each antenna element can be connected to one or more TR modules.
arun1993 / Implementing 802.11 Transmitter And Receiver Blocks In MATLABIn this repo, an OFDM communication system is realized using Matlab. The system represents a simplified version of the WiFi (802.11) PHY layer, which involves packet construction at the transmitter side, and packet detection, synchronization and decoding at the receiver side.
akuhara / MC3deconvBayeisan inversion to recover Green's functions of receiver-side structures from teleseismic waveforms
Liang-Ding / PyCAPLunarpyCAPLunar is a python package to determine the moment tensor of earthquake sources and their uncertainty by using the 3D receiver-side SGT database.
archity / GPS ReceiverThis repository consists of the processing of the recieved GPS signals at the receiver side. MATLAB has been put to use. MATLAB to HDL may be used for running it on an FPGA.
sagarpant / Restaurant Of The FutureRestaurant of The Future Abstract-: Changing the tradition of human waiters, the bot delivers delicious food to you. The project uses mobile app to order the food and a mechanical bot to deliver the cokked food to the consumer. Team Members-: 1)Sanjay Kumar 2)Kundan Kumar 3)Aman Verma 4)Sagar Pant 5)Shubham Chitransh 5)Harshit Bansal 6)Karan Shrivastav Mentors-: Prashant Pulkit Goyal Applications-: The bot may be used to completely transform the future of restaurants. It may be used as the perfect replacement for the waitors to deliver the food ordered by the customer . Other applications include delivery of goods from malls and other nearby stores. Pre-Requisites-: 1)Arduino (Uno / Mega or any other aduino board) 2)2 Servo Motors(..... ) 3)2 Wheels 4)1 Caster Wheel 5)2 Motor Drives(L298N) 6)2 Encoders / Proximity sesnors 7)Bluetooth Module(HC-05) 8)Jumper Wires 9)Breadboard 10)12V battery Software Used- !)Arduino 2)Android Studio Electronic Design -: Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, - and turn it into an output - activating a motor, turning on an LED. You can tell your board what to do by sending a set of instructions to the microcontroller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing. We used Arduino Mega Board -: The Arduino Mega is a microcontroller board based on the ATmega1280 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila. Otical Encoder-: An optical encoder is a type of rotary encoder that uses a sensor to identify position change as light passes through a patterned encoder wheel or disk. There are four components in an optical shaft encoder: A light source (an LED light) A sensor A moveable disk A fixed mask The LED shines through one side of the optical shaft encoder. The encoder wheel or disk has a series of tracks on it, similar to the concentric grooves in an LP. The mask has a corresponding track for every track on the disk of the optical encoder, and small perforations, called windows, are cut along the tracks in the mask. As the disk moves, different windows in the mask are covered or open, showing the movement and position of the optical shaft encoder. Each arc in the rotation indicates a different position and has a different pattern of open/closed windows. The sensor behind the mask identifies the optical encoders’ current pattern. Motor Drives-: An H-Bridge is a circuit that can drive a current in either polarity and be controlled by *Pulse Width Modulation (PWM). Pulse Width Modulation is a means in controlling the duration of an electronic pulse. In motors try to imagine the brush as a water wheel and electrons as a the flowing droplets of water. The voltage would be the water flowing over the wheel at a constant rate, the more water flowing the higher the voltage. Motors are rated at certain voltages and can be damaged if the voltage is applied to heavily or if it is dropped quickly to slow the motor down. Thus PWM. Take the water wheel analogy and think of the water hitting it in pulses but at a constant flow. The longer the pulses the faster the wheel will turn, the shorter the pulses, the slower the water wheel will turn. Motors will last much longer and be more reliable if controlled through PWM. Working -: The Bot is a signal receiver cum delivery bot that may be used in a restaurant to take the order from the customer and deliver the ordered itmes to cutomers. This is done by the use of an app built using android studio. The app may be placed on each table of a restaurant and the customers may use it for ordering food. The bot uses a bluetooth module to recieve the signal and gets to know about the table to which it is supposed to move. Then it makes use of the code on the microcontroller and moves to the table which has ordered the food and delivers it to the customer by sliding the upper plate using a gear driven by the motor. The error reduction in motion is done through pid tuning of the bot. The bot moves to the table position which is fixed and delivers the food.
benbaptist / RtlwebPython-based SDR receiver, controlled entirely over the web. All processing performed server-side, for minimum bandwidth impact.
mtuqorg / SeisgenSEISGEN is a python package to acquire and generate the Greens function and synthetic waveform from the stored receiver-side 3D database including the Strain Greens Tensor (SGT) database and the (displacement) Greens function (DGF) database.
lpx1233 / RxDspLibThe receiver side dsp library in Matlab
openskynetwork / Opensky SensorThis is the OpenSky Daemon (OpenSkyD), which serves as an intermediate component between an ADSB receiver and the OpenSky Network, relaying ADS-B frames to the OpenSky collector server. It is supposed to run on the user side.
asadian98 / 802.11a PHYHardware implementation (Verilog) and Software Implementation (MATLAB) of IEEE's 802.11a standard for transmitter and receiver sides of WLAN PHY.
vinaychawla11 / Image Encryption Using Elliptic Curve Cryptography And Exchange Using Web SocketsThis is my final year project along with 2 of my peers, which uses AES-256 along with Elliptic Curve key generation and sharing to encrypt images. It uses what is known as Elliptic Curve Integrated Encryption Scheme. It is coded in Python and uses web socket to share images between 2 clients. It encrypts the image before sending and decrypts it on the receiver side using the above mentioned scheme.
sowetom / ESP32 NRF24 TX RXThis project was my attempt to build a simple transmitter receiver remote control or joystick with 2 servos on the receive side to control either camera movements robotics or simple toys. I use one ESP32 and NRF for TX and another set for RX. There are 2 sketches included, one for each. With the introduction of the ESPNow communication protocol many are using that instead for wireless communication in the 2.4GHz range but keeping a separate 2.4 channel using the NRF will prove useful later on when the project is taken to the next level to create mesh networked devices using wifi backhaul to provide 2 separate 2.4 channels for more bandwidth and interference mitigation. I tried to find an already existing project like this and i imagine there are but this is my version. I try to use timer based interrupts/delays to sync transmission packets but this only shows the beginnings of that process. I will model the communication protocol based on cellular concepts to minimize losses and increase bandwidth efficiency plus audio/video packets will eventually be sent along with coordinate data.
amansouri3476 / 802.11a PHYHardware implementation (by Verilog HDL) and Software Implementation (by Matlab) of IEEE's 802.11a standard for transmitter and receiver sides of PHY
danielrempel / USBIRReceiverUSB IR receiver on atmega8l with own host-side software
mrusamamuzaffar / Static Chat ScreenThis is demo chat screen. You can add message to the sender side by simply pressing the send button and to add message to the receiver side, you have to long press the same send button.
Shreekanya / Receiver Side LMS Adaptive EqualizerThis is a self learning project to implement a single tap equalizer and understand the working of Least Mean Square algorithm for adaptive equalization
Anthon1e / ADRV9009 Receiver Signal Path FIR FilterAn attempt to implement the signal path on the receiver side of the ADRV9009, a highly integrated, radio frequency (RF) transceiver.
