o
      o   /---o
     /---/---o
o---/
     \---\---o
      o   \---o
            o

Cyme

List system USB buses and devices. A modern cross-platform lsusb that attempts to maintain compatibility with, but also add new features. Profiles system USB buses and the devices on those buses, including full device descriptors.

As a developer of embedded devices, I use a USB list tool on a frequent basis and developed this to cater to what I believe are the short comings of lsusb: verbose dump is mostly too verbose, tree doesn't contain useful data on the whole, it barely works on non-Linux platforms and modern terminals support features that make glancing through the data easier.

The project started as a quick replacement for the barely working lsusb script and a Rust project to keep me up to date! Like most fun projects, it quickly experienced feature creep as I developed it into a cross-platform replacement for lsusb. It started as a macOS system_profiler parser, evolved to include a 'libusb' based profiler for reading full device descriptors and now defaults to a pure Rust profiler using nusb.

It's not perfect as it started out as a Rust refresher but I had a lot of fun developing it and hope others will find it useful and can contribute. Reading around the lsusb source code, USB-IF and general USB information was also a good knowledge builder.

The name comes from the technical term for the type of blossom on a Apple tree: cyme - it is Apple related and also looks like a USB device tree 😃🌸.

Features

• Compatible with lsusb using --lsusb argument. Supports all arguments including --verbose output - fully parsed device descriptors! Output is identical for use with no args (list), tree (excluding drivers on non-Linux) and should match for verbose (perhaps formatting differences).
• Default build is a native Rust profiler using nusb.
• Filters like lsusb but that also work when printing --tree. Adds --filter-name, --filter-serial, --filter-class and option to hide empty --hide-buses/--hide-hubs.
• Improved --tree mode; shows device, configurations, interfaces and endpoints as tree depending on level of --verbose.
• Controllable display --blocks for device, bus --bus-blocks, configurations --config-blocks, interfaces --interface-blocks and endpoints --endpoint-blocks. Use --more to see more by default.
• Modern terminal features with coloured output, utf-8 characters and icon look-up based device data. Can be turned off and customised. See --encoding (glyphs [default], utf8 and ascii), which can keep icons/tree within a certain encoding, --color (auto [default], always and never) and --icon (auto [default], always and never). Auto --icon will only show icons if all icons to be shown are supported by the --encoding.
• Can be used as a library too with system profiler module, USB descriptor modules and display module for printing amongst others.
• --json output that honours filters and --tree.
• --headers to show meta data only when asked and not take space otherwise.
• --mask-serials to either '*' or randomise serial string for sharing dumps with sensitive serial numbers.
• Auto-scaling to terminal width. Variable length strings such as descriptors will be truncated with a '...' to indicate this. Can be disabled with config option 'no-auto-width' and a fixed max defined with 'max-variable-string-len'.
• cyme watch subcommand to watch for USB device hotplug events and also live edit display settings. Works with all global flags.
• Targets for Linux, macOS and Windows.

Demo

<a href="https://asciinema.org/a/542486" target="_blank"><img src="https://asciinema.org/a/542486.svg" /></a>

• YouTube demo of watch sub-command

Install

Requirements

For pre-compiled binaries, see the releases. Pre-compiled builds use native profiling backends and should require no extra dependencies.

From crates.io with a Rust tool-chain installed: cargo install cyme. To do it from within a local clone: cargo install --locked --path ..

Package Managers

• Homebrew 'cyme' which will also install a man page, completions and the 'libusb' dependency:

brew install cyme

• Arch Linux official package

pacman -S cyme

• Debian packages as part of release - need a Debian maintainer for this.

More package managers to come/package distribution, please feel free to create a PR if you want to help out here.

Alias lsusb

If one wishes to create a macOS version of lsusb or just use this instead, create an alias one's environment with the --lsusb compatibility flag:

alias lsusb='cyme --lsusb'

Linux udev Information

[!NOTE] Only supported on Linux targets.

To obtain device and interface drivers being used on Linux like lsusb, one can use the --features udev feature when building - it's a default feature. The feature uses the Rust crate udevrs to obtain the information. To use the C FFI libudev library, use --no-default-features --features udevlib which will use the 'libudev' crate. Note that this will require 'libudev-dev' to be installed on the host machine.

To lookup USB IDs from the udev hwdb as well (like lsusb) use --features udev_hwdb. Without hwdb, cyme will use the 'usb-ids' crate, which is the same source as the hwdb binary data but the bundled hwdb may differ due to customisations or last update ('usb-ids' will be most up to date).

Profilers and Feature Flags

Native

Uses native Rust nusb and udevrs for profiling devices: sysfs (Linux), IOKit (macOS) and WinUSB.

It is the default profiler as of 2.0.0. Use --feature=native ('nusb' and 'udevrs' on Linux) or --feature=nusb to manually specify.

Libusb

Uses 'libusb' for profiling devices. Requires libusb 1.0.0 to be installed: brew install libusb, sudo apt install libusb-1.0-0-dev or one's package manager of choice.

Was the default feature before 2.0.0 for gathering verbose information. It is the profiler used by lsusb but there should be no difference in output between the two, since cyme uses control messages to gather the same information. If one wishes to use 'libusb', use --no-default-features and --feature=libusb or --feature=ffi for udevlib too.

[!NOTE] 'libusb' does not profile buses on non-Linux systems (since it relies on root_hubs). On these platforms, cyme will generate generic bus information.

macOS system_profiler

Uses the macOS system_profiler SPUSBDataType command to profile devices.

Was the default feature before 2.0.0 for macOS systems to provide the base information; 'libusb' was used to open devices for verbose information. It is not used anymore if using the default native profiler but can be forced with --system-profiler - the native profiler uses the same IOKit backend but is much faster as it is not deserializing JSON. It also always captures bus numbers where system_profiler does not.

[!TIP] If wishing to use only macOS system_profiler and not obtain more verbose information, remove default features with cargo install --no-default-features cyme. There is not much to be gained by this considering that the default native profiler uses the same IOKit as a backend, can open devices to read descriptors (verbose mode) and is much faster.

Usage

Use cyme --help for basic usage or man ./doc/cyme.1. There are also autocompletions in './doc'.

Examples

Tree

# List all USB devices and buses in a tree format with default display blocks
cyme --tree
# As above but with configurations too
cyme --tree --verbose
# And with interfaces and endpoints - each verbose level goes further down the USB descriptor tree. Using short arg here.
cyme --tree -vvv
# List all USB devices and buses in a tree format with more display blocks, all verbose levels and headings to show what is being displayed
cyme --tree --more --headings
# Export the tree to a JSON file - --json works with all options
cyme --tree --verbose --json > tree.json
# Then import the JSON file to view the system USB tree as it was when exported. All cyme args can be used with this static import as if it was profiled data.
cyme --from-json tree.json

lsusb

# List all USB devices and buses like 'lsusb'
cyme --lsusb
# lsusb verbose device dump including all descriptor information
cyme --lsusb --verbose
# lsusb tree mode (can add verbose levels [-v])
cyme --lsusb --tree

Blocks

See cyme --help for blocks available. One can also omit the value to the arg to show options. Specifying multiple blocks requires multiple args or csv. By default the supplied blocks will add to the default blocks. Use --block-operation to change this behaviour.

# List USB devices with more display blocks
cyme --more
# Add base-class and last-event blocks to default display and host-controller-vendor to bus display
cyme --blocks base-class,last-event --bus-blocks host-controller-vendor
# Add dev-path and mount-paths to interface blocks
cyme --interface-blocks dev-path,mount-paths
# List USB devices with explicit blocks: name, vid, pid, serial, speed (can u