Rationals .NET

Implementation of rational number arithmetic for .NET with arbitrary precision.

var left = (Rational) 1 / 2;
var right = (Rational) 1 / 4;

var sum = left + right; // equals to: 3 / 4

Download

Binaries of the last build can be downloaded on the AppVeyor CI page of the project.

The library is also published on NuGet.org, install using:

PM> Install-Package Rationals

The library can be used since .NET 4.0 or .NET Standard 1.3. It's also CLS compliant to allow use in VB.NET.

Features

implicit conversions - rationals integrate seamlessly with other number types
unlimited precision - rationals use BigInteger inside
canonical form - each rational can have its canonical form (irreducible fraction where denominator is always positive)
comparison & equality
separate whole and fractional part - any rational number can be separated into a whole part (integer quotient aka result of integer division) and fractional part (reminder of the integral division aka result of modulo operation)
continued fraction expansion - expand rational numbers to continued fraction (sequence of coefficients), construct rational numbers from sequence of continued fraction coefficients
rational number approximation - approximate floating point numbers (decimal, double, float) as rational numbers with customizable tolerance
multiple formatting options - ToString("C") (canonical form), ToString("W") (whole + fractional part), or normal fraction format

Documentation

The Rationals library is an alternative to BigRational found in BCL. Its implementation is quite trivial, it doesn't do any low-level magic to make sure it's the best performer. But it should be easy to use and has few nice features.

Constructors

There are just two constructors to rational numbers. For most scenarios, you might not need to use those constructors directly and rely on the typecasting operators.

// constructor from a whole BigInteger number
var p = new Rational(new BigInteger(3));

// constructor from a BigInteger numerator and denominator
var p = new Rational(new BigInteger(1), new BigInteger(2));

Implicit conversions from other types

Rationals are much easier created by implicit conversions. There exist implicit conversions from: int, uint, short, ushort, long, ulong, byte, sbyte, and BigInteger.

Rational p = 5;

Explicit conversions from other types

There exist explicit operator conversions from decimal, double, and float.

var p = (Rational) 0.5; // equals to: 1/2

Note that sometimes you might not get very nice rational numbers as the output.

var p = (Rational) 0.71428571428M; // equals to: 71428571428/100000000000 (or 17857142857/25000000000 simplified)

However, 0.71428571428 is almost exactly 5/7. To actually read the number as 5/7, you have to use the Rational.Approximate function and provide some tolerance.

Approximation

Approximation tries to find the "simplest" rational number for given decimal/floating point number.

The library supports approximation of decimal, double, and float numbers. An optional second tolerance parameter might be given.

var p1 = Rational.Approximate(0.71428571428M);                            // 17857142857/25000000000
var p2 = Rational.Approximate(0.71428571428M, tolerance: 0.00000000001M); // 5/7

var q1 = Rational.Approximate(0.3333);         // 3333/10000
var q2 = Rational.Approximate(0.3333, 0.0001); // 1/3

Continuous fraction expansion

Rational numbers can be expanded into Continuous fractions. The library can expand any rational number into a such a fraction, the result of this is the sequence of those coefficients.

For example, the rational number 649/200 can be represented as a continuous fraction with coefficients 3, 4, 12, 4, which when used in the formula 3 + 1/(4 + 1/(12 + 1/4)) give the result 649/200.

// compute rational number from continuous fraction coefficients
var p = Rational.FromContinuedFraction(new BigInteger[] { 3, 4, 12, 4 }); // 649/200

// find continuous fraction coefficients for a rational number
var coefficients = ((Rational) 10 / 7).ToContinuedFraction(); // 1, 2, 3

Reducing fractions, canonical form

The library supports reducing (simplifying) fractions. To reduce a fraction, you can use the CanonicalForm property. That returns a rational number that's irreducible, and where also the denominator is always positive. Canonical form of zero is 0/1.

var p1 = ((Rational) 9 / 12).CanonicalForm;    // 3/4
var p2 = ((Rational) (-9) / 12).CanonicalForm; // -3/4
var p3 = ((Rational) 9 / -12).CanonicalForm;   // -3/4
var p4 = ((Rational) 0 / -12).CanonicalForm;   // 0/1

There should always be just one canonical form of any rational number.

Whole and fractional parts

A rational number x/y can be thought of as having a whole and fractional part a + b/c.

For example, the 14/4 can be written as 3 + 2/4 where 3 is the whole part, and 2/4 is the fractional part.

var r1 = (Rational)14 / 4;
BigInteger a1 = r1.WholePart;   // 3
Rational bc1 = r1.FractionPart; // 2/4

var r2 = (Rational)(-49) / 10;
BigInteger a2 = r2.WholePart;   // -5
Rational bc2 = r2.FractionPart; // 1/10

Explicit conversions to other types

Rational numbers can be explicitly converted to decimal, double, and float decimal numbers. Note that the Rational type has unlimited precision where the types to convert to are limited. As a result of that, there might be some rounding occurring or an overflow.

var p1 = (Rational) 1 / 2;
var x1 = (decimal) p1; // 0.5

var p2 = (Rational) 1 / 3;
var x2 = (double) p2; // 0.33333333333333337

Rational numbers can also be explicitly converted to whole number types int, uint, short, ushort, long, ulong, byte, and sbyte. For these, we only take the whole part of the fractional number:

var p1 = (Rational) 3 / 2;
var x1 = (int) p1; // 1

var p2 = (Rational) (-3) / 2;
var x2 = (int) p2; // -2

BigInteger inspired properties

There are several other useful properties of the rational number that have similar equivalents in BigInteger:

.IsZero returns true if the number is equal to 0
.IsOne returns true if the is equal to 1
.Sign returns an int number (negative, positive, or zero) that indicates the sign of the number
.IsPowerOfTwo returns true if the number is a power of two

Overloaded operators

Rational numbers have all the common numeric operators overloaded so that their use in C# is very idiomatic. All of these operators should behave as expected: +, unary -, binary -, *, /, ++, --, ==, !=, <, >, <=, >=.

var p = (Rational) 3 / 4;
var q = (Rational) 1 / 3;
var result = p / q; // 9/4

Mathematical operations

The Rational class has a range of static methods that implement common mathematical operations. Some of these can be used through the corresponding overloaded operators.

var p = (Rational) 3 / 4;
var q = (Rational) 1 / 3;

Rational.Invert(p);      // 4/3
Rational.Negate(p);      // -3/4
Rational.Add(p, q);      // 13/12
Rational.Subtract(p, q); // 5/12
Rational.Multiply(p, q); // 3/12
Rational.Divide(p, q);   // 9/4
Rational.Pow(p, 2);      // 9/16
Rational.Abs(p);         // 3/4
Rational.Log10(p);       // -0.12493873660829985
Rational.Log(p);         // -0.28768207245178079 (base is e)
Rational.Log(p, 2);      // -0.4150374992788437
Rational.Root(p, 2);     // 0.8660254037844386 (square root, result is double)
Rational.RationalRoot((Rational) 9 / 16, 2); // 3/4 (square root, result is rational)

Computing magnitude

Magnitude of a number can be thought of as the exponent of 10 if the number was written in scientific notation.

Magnitude of 0 is 0.
Magnitude of 5 is 0.
Magnitude of 12 is 1.
Magnitude of 3988222 is 6.
Magnitude of 0.2223 is -1.
Magnitude of 0.04 is -2.

To find the magnitude of rational number, use the .Magnitude property.

var p = (Rational) 1 / 11;
int magnitude = p.Magnitude; // -2

Significant digits

Every rational number has a Digits property that enumerates all significant digits of the rational number. You might want to use this together with the Magnitude property.

Keep in mind that the result of this might be infinite. For example, for the rational number 1/3, it will return an infinite sequence of threes.

((Rational) 200).Digits;                // 2
((Rational) 1/2).Digits;                // 5
((Rational) 1/3).Digits.Take(10);       // 3, 3, 3, 3, 3, 3, 3, 3, 3, 3
((Rational) (-213)/31).Digits.Take(10); // 6, 8, 7, 0, 9, 6, 7, 7, 4, 1
((Rational) 0).Digits;                  // 0

Formatting

Rational numbers can be formatted in three formats passed int

Rationals

Install / Use

README