RaspiCam

#RaspiCam

RaspiCam can be used to capture(server) and play(client) video

Hardware:

• RaspiberryPi B+
• RPi-Camera-F

Software:

• Server(written in python, runs on raspbian)
• Client(written in c++(Qt), runs on ubuntu)

###!!still under development...

depends on libvlc: libvlc may support Qt5 as well, but on my ubuntu, many
software depends on libGuiQt4.so I tend not to remove libGuiQt4 or modify $PATH(may have effect)
so if you want use Qt5 with libvlc , just do it . ^V^

###Server:

• (Capture video use raspivid and Streaming video use vlc)
• support start, stop video streaming control
• support video record local(pc) and remote(Pi) (local record file in currdir remote record file in /home/pi/records/year-month-day/hh:mm:ss.mp4)
• support remote change video streaming parameters(brightness, fps, bitrate, video width, video height...)
• support auto discovery
• support web access(control)

###Client:

• (Play video use libvlc based on Qt)
• support auto discovery Rpi(just push scan button)
• support start, stop control
• support record and remote-record control
• support video record replay
• support local snapshot(store in snapshot folder)
• support remote change Rpi video streaming parameters(brightness, fps, bitrate, video width, video height...)

##Installation

before use :
check Server(RaspiberryPi) installed these components:
python-dev -- sudo apt-get install python-dev
pyhton-pip -- sudo apt-get install python-pip
vlc        -- sudo apt-get install vlc
netifaces  -- sudo pip install netifaces

*may be has other packeges or components not mentioned above you may install 
by yourself.*

##Useage:

Server:

- put server dir in your Rpi then
- cd server
- python ctlserver.py

Client:

- open with Qt then compile and run
- (or) 

    1.cd RaspiCamClient
    2.qmake
    3.make

sorry for my poor english