Pattern-Exploiting Training (PET)

This repository contains the code for Exploiting Cloze Questions for Few-Shot Text Classification and Natural Language Inference and It's Not Just Size That Matters: Small Language Models Are Also Few-Shot Learners. The papers introduce pattern-exploiting training (PET), a semi-supervised training procedure that reformulates input examples as cloze-style phrases. In low-resource settings, PET and iPET significantly outperform regular supervised training, various semi-supervised baselines and even GPT-3 despite requiring 99.9% less parameters. The iterative variant of PET (iPET) trains multiple generations of models and can even be used without any training data.

<table> <tr> <th>#Examples</th> <th>Training Mode</th> <th>Yelp (Full)</th> <th>AG's News</th> <th>Yahoo Questions</th> <th>MNLI</th> </tr> <tr> <td rowspan="2" align="center">0</td> <td>unsupervised</td> <td align="right">33.8</td> <td align="right">69.5</td> <td align="right">44.0</td> <td align="right">39.1</td> </tr> <tr> <td>iPET</td> <td align="right">56.7</td> <td align="right">87.5</td> <td align="right">70.7</td> <td align="right">53.6</td> </tr> <tr> <td rowspan="3" align="center">100</td> <td>supervised</td> <td align="right">53.0</td> <td align="right">86.0</td> <td align="right">62.9</td> <td align="right">47.9</td> </tr> <tr> <td>PET</td> <td align="right">61.9</td> <td align="right">88.3</td> <td align="right">69.2</td> <td align="right">74.7</td> </tr> <tr> <td>iPET</td> <td align="right">62.9</td> <td align="right">89.6</td> <td align="right">71.2</td> <td align="right">78.4</td> </tr> </table>

Note: To exactly reproduce the above results, make sure to use v1.1.0 (--branch v1.1.0).

📑 Contents

🔧 Setup

💬 CLI Usage

💻 API Usage

🐶 Train your own PET

📕 Citation

🔧 Setup

All requirements for PET can be found in requirements.txt. You can install all required packages with pip install -r requirements.txt.

💬 CLI Usage

The command line interface cli.py in this repository currently supports three different training modes (PET, iPET, supervised training), two additional evaluation methods (unsupervised and priming) and 13 different tasks. For Yelp Reviews, AG's News, Yahoo Questions, MNLI and X-Stance, see the original paper for further details. For the 8 SuperGLUE tasks, see this paper.

PET Training and Evaluation

To train and evaluate a PET model for one of the supported tasks, simply run the following command:

python3 cli.py \
--method pet \
--pattern_ids $PATTERN_IDS \
--data_dir $DATA_DIR \
--model_type $MODEL_TYPE \
--model_name_or_path $MODEL_NAME_OR_PATH \
--task_name $TASK \
--output_dir $OUTPUT_DIR \
--do_train \
--do_eval

where

$PATTERN_IDS specifies the PVPs to use. For example, if you want to use all patterns, specify PATTERN_IDS 0 1 2 3 4 for AG's News and Yahoo Questions or PATTERN_IDS 0 1 2 3 for Yelp Reviews and MNLI.
$DATA_DIR is the directory containing the train and test files (check tasks.py to see how these files should be named and formatted for each task).
$MODEL_TYPE is the name of the model being used, e.g. albert, bert or roberta.
$MODEL_NAME is the name of a pretrained model (e.g., roberta-large or albert-xxlarge-v2) or the path to a pretrained model.
$TASK_NAME is the name of the task to train and evaluate on.
$OUTPUT_DIR is the name of the directory in which the trained model and evaluation results are saved.

You can additionally specify various training parameters for both the ensemble of PET models corresponding to individual PVPs (prefix --pet_) and for the final sequence classification model (prefix --sc_). For example, the default parameters used for our SuperGLUE evaluation are:

--pet_per_gpu_eval_batch_size 8 \
--pet_per_gpu_train_batch_size 2 \
--pet_gradient_accumulation_steps 8 \
--pet_max_steps 250 \
--pet_max_seq_length 256 \
--pet_repetitions 3 \
--sc_per_gpu_train_batch_size 2 \
--sc_per_gpu_unlabeled_batch_size 2 \
--sc_gradient_accumulation_steps 8 \
--sc_max_steps 5000 \
--sc_max_seq_length 256 \
--sc_repetitions 1

For each pattern $P and repetition $I, running the above command creates a directory $OUTPUT_DIR/p$P-i$I that contains the following files:

pytorch_model.bin: the finetuned model, possibly along with some model-specific files (e.g, spiece.model, special_tokens_map.json)
wrapper_config.json: the configuration of the model being used
train_config.json: the configuration used for training
eval_config.json: the configuration used for evaluation
logits.txt: the model's predictions on the unlabeled data
eval_logits.txt: the model's prediction on the evaluation data
results.json: a json file containing results such as the model's final accuracy
predictions.jsonl: a prediction file for the evaluation set in the SuperGlue format

The final (distilled) model for each repetition $I can be found in $OUTPUT_DIR/final/p0-i$I, which contains the same files as described above.

🚨 If your GPU runs out of memory during training, you can try decreasing both the pet_per_gpu_train_batch_size and the sc_per_gpu_unlabeled_batch_size while increasing both pet_gradient_accumulation_steps and sc_gradient_accumulation_steps.

iPET Training and Evaluation

To train and evaluate an iPET model for one of the supported tasks, simply run the same command as above, but replace --method pet with --method ipet. There are various additional iPET parameters that you can modify; all of them are prefixed with --ipet_.

For each generation $G, pattern $P and iteration $I, this creates a directory $OUTPUT_DIR/g$G/p$P-i$I that is structured as for regular PET. The final (distilled) model can again be found in $OUTPUT_DIR/final/p0-i$I.

🚨 If you use iPET with zero training examples, you need to specify how many examples for each label should be chosen in the first generation and you need to change the reduction strategy to mean: --ipet_n_most_likely 100 --reduction mean.

Supervised Training and Evaluation

To train and evaluate a regular sequence classifier in a supervised fashion, simply run the same command as above, but replace --method pet with --method sequence_classifier. There are various additional parameters for the sequence classifier that you can modify; all of them are prefixed with --sc_.

Unsupervised Evaluation

To evaluate a pretrained language model with the default PET patterns and verbalizers, but without fine-tuning, remove the argument --do_train and add --no_distillation so that no final distillation is performed.

Priming

If you want to use priming, remove the argument --do_train and add the arguments --priming --no_distillation so that all training examples are used for priming and no final distillation is performed.

🚨 Remember that you may need to increase the maximum sequence length to a much larger value, e.g. --pet_max_seq_length 5000. This only works with language models that support such long sequences, e.g. XLNet. For using XLNet, you can specify --model_type xlnet --model_name_or_path xlnet-large-cased --wrapper_type plm.

💻 API Usage

Instead of using the command line interface, you can also directly use the PET API, most of which is defined in pet.modeling. By including import pet, you can access methods such as train_pet, train_ipet and train_classifier. Check out their documentation for more information.

🐶 Train your own PET

To use PET for custom tasks, you need to define two things:

a DataProcessor, responsible for loading training and test data. See examples/custom_task_processor.py for an example.
a PVP, responsible for applying patterns to inputs and mapping labels to natural language verbalizations. See examples/custom_task_pvp.py for an example.

After having implemented the DataProcessor and the PVP, you can train a PET model using the command line as described above. Below, you can find additional information on how to define the two components of a PVP, verbalizers and patterns.

Verbalizers

Verbalizers are used to map task labels to words in natural language. For example, in a binary sentiment classification task, you could map the positive label (+1) to the word good and the negative label (-1) to the word bad. Verbalizers are realized through a PVP's verbalize() method. The simplest way of defining a verbalizer is to use a dictionary:

VERBALIZER = {"+1": ["good"], "-1": ["bad"]}
    
def verbalize(self, label) -> List[str]:
    return self.VERBALIZER[label]

Importantly, in PET's current version, verbalizers are by default restricted to single tokens in the underlying LMs vocabulary (for using more than one token, see below). Given a language model's tokenizer, you can easily check whether a word corresponds to a single token by verifying that len(tokenizer.tokenize(word)) == 1.

You can also define multiple verbalizations for a single label. For example, if you are unsure which words best represent the labels in a binary sentiment classification task, you could define your verbalizer as follows:

Pet

Install / Use

README