comicnamer

comicnamer is a utility which to rename files from some.comic.01.cbr to Some Comic - [01] - The Issue Name.cbr (by retrieving the issue name using data from comicvine_api)

To install

You can easily install comicnamer via easy_install

sudo easy_install comicnamer

This installs the comicnamer command-line tool (and the comicvine_api module as a requirement)

If you wish to install the latest (non-stable) development version from source, download the latest version of the code, either from http://github.com/swc/comicnamer/tarball/master or by running:

git clone git://github.com/swc/comicnamer.git

..then cd into the directory, and run:

sudo python setup.py install

Example terminal session (you can skip the curl line if you have already downloaded and extracted the above link):

$ cd Downloads/
$ curl -L http://github.com/swc/comicnamer/tarball/master | gunzip - | tar -x -
$ ls
swc-comicnamer-02b9a4c/
$ cd swc-comicnamer-02b9a4c/
$ sudo python setup.py install
Password:
[...]
Finished processing dependencies for comicnamer==1.0

Bugs?

Please make tickets for any possible bugs or feature requests, or if you discover a filename format that comicnamer cannot parse (as long as a reasonably common format, and has enough information to be parsed!), or if you are struggling with the a custom configuration (please state your desired filename output, and what problems you are encountering)

Basic usage

From the command line, simply run:

comicnamer the.file.01.cbr

For example:

$ comicnamer y.the.last.man.01.cbr
####################
# Starting comicnamer
# Found 1 issues
# Processing file: y.the.last.man.01.cbr
# Detected series: Y - The Last Man (issue: 1)
ComicVine Search Results:
1 -> Y: The Last Man # http://api.comicvine.com/series/9419/
Automatically selecting only result
####################
# Old filename: y.the.last.man.01.cbr
# New filename: Y The Last Man - [001] - Unmanned.cbr
Rename?
([y]/n/a/q) 

Enter y then press return and the file will be renamed to "Y The Last Man - [001] - Unmanned.cbr". You can also simply press return to select the default option, denoted by the surrounding []

If there are multiple series' with the same (or similar) names or languages, you will be asked to select the correct one - "The Walking Dead" is a good example of this:

$ comicnamer the.walking.dead.01.cbr
####################
# Starting comicnamer
# Found 1 issues
# Processing the.walking.dead.01.cbr
ComicVine Search Results:
1 -> The Walking Dead # http://api.comicvine.com/series/18166/
2 -> The Walking Dead # http://api.comicvine.com/series/30345/
3 -> The Walking Dead # http://api.comicvine.com/series/19273/
4 -> Image Firsts: The Walking Dead # http://api.comicvine.com/series/32361/
5 -> The Walking Dead Special Edition # http://api.comicvine.com/series/34065/
6 -> Deadman: Deadman Walking # http://api.comicvine.com/series/29972/
Enter choice (first number, ? for help):    

To select the first result, enter 1 then return, to select the second enter 2 and so on. The link after # goes to the relevant [comicvine.com][comicvine] page, which will contain information and images to help you select the correct series.

You can rename multiple files, or an entire directory by using the files or directories as arguments:

$ comicnamer file1.cbr file2.cbr etc
$ comicnamer .
$ comicnamer /path/to/my/folder/
$ comicnamer ./folder/1/ ./folder/2/

You can skip a specific file by entering n (no). If you enter a (always) comicnamer will rename the remaining files automatically. The suggested use of this is check the first few issues are named correctly, then use a to rename the rest.

Note, comicnamer will only descend one level into directories unless the -r (or --recursive) flag is specified. For example, if you have the following directory structure:

dir1/
    file1.cbr
    dir2/
        file2.cbr
        file3.cbr

..then running comicnamer dir1/ will only rename file1.cbr, ignoring dir2/ and its contents.

If you wish to rename all files (file1, file2 and file3), you would run:

comicnamer --recursive dir1/

Command line arguments

There are various flags you can use with comicnamer, run..

comicnamer --help

..to see them, and a short description of each.

The most useful are most likely --batch, --selectfirst and --always:

--selectfirst will select the first series the search found, but will not automatically rename any issues.

--always will ask you select the correct series, then automatically rename all files.

--batch will not prompt you for anything. It automatically selects the first series search result, and automatically rename all files (identical to using both --selectfirst and --always). Use carefully!

Configs

comicnamer allows you to customise behaviour without modifying the code. To write the default JSON configuration file, which is a good starting point for your modifications, simply run:

comicnamer --save=./mycomicnamerconfig.json

To use your custom configuration, you must either specify the location using comicnamer --config=/path/to/mycomicnamerconfig.json or place the file at ~/.comicnamer.json (a file named .comicnamer.json in your home directory)

Important: If comicnamer's default settings change and your saved config contains the old settings, you may experience strange behaviour or bugs (the config may contain a buggy filename_patterns regex, for example). It is recommended you remove config options you are not altering (particularly filename_patterns). If you experience any strangeness, try disabling your custom configuration (moving it away from ~/.comicnamer.json)

If for example you wish to change the default extensions recognized by comicnamer, modify the extensions listed in valid_extensions. Your config file would look something like:

{
    "valid_extensions": ["cbr", "cbz"]
}

For an always up-to-date description of all config options, see the comments in config_defaults.py

Custom output filenames

If you wish to change the output filename format, there are several options you must change:

• One for a file with an issue name (filename_with_issue). Example input: y.the.last.man.01.unmanned.cbr
• One for a file without an issue name (filename_without_issue). Example input: the.walking.dead.01.cbr

Say you want the format Series Name 001 Issue Name.cbr, your filename_with_issue option would be:

%(seriesname)s %(issue)s %(issuename)s%(ext)s

The formatting language used is Python's string formatting feature, which you can read about in the Python documentation, 6.6.2. String Formatting Operations. Basically it's just %()s and the name element you wish to use between ( )

Note ext contains the extension separator symbol, usually . - for example .cbr

Then you need to make a variant without the issuename section:

filename_without_issue:

%(seriesname)s %(issue)s%(ext)s

There are yet two more options you may want to change, issue_single and issue_separator

issue_single is the Python string formatting pattern used to format the issue number. By default it is %02d - this simply turns the number 1 to 01, and keeps 24 as 24

If you do not want any padding in your numbers, you could change this to %d - this would result in filenames such as Series - [3] - Issue Name.cbr (or Series 3 Issue Name.cbr using your custom name, as described above)

The issue_separator option is for multi-issue files. When multiple issues are detected in one file (such as Air.01-02.cbr), this string is used to join the issue numbers together. By default it is - which results in filenames such as Air - [01-02] - ... .cbr

You could change this to , , and by altering the filename_* options you could create filenames such as..

Series - [01, 02] - Issue Name.cbr

By default, comicnamer will sanitise files for the current operating system - either POSIX-compatible (OS X, Linux, FreeBSD) or Windows. You can force Windows compatible filenames by setting the option windows_safe_filenames to True

You can remove spaces in characters by adding a space to the option custom_filename_character_blacklist and changing the option replace_blacklisted_characters_with to .

normalize_unicode_filenames attempts to replace Unicode characters with their unaccented ASCII equivalent (å becomes a etc). Any untranslatable characters are removed.

selectfirst and always_rename mirror the command line arguments --selectfirst and --always - one automatically selects the first series search result, the other always renames files. Setting both to True is equivalent to --batch. recursive also mirrors the command line argument

Custom filename parsing pattern

comicnamer comes with a set of patterns to parse a majority of common (and many uncommon) comic file names. If these don't parse your files, you can write custom patterns.

The patterns are regular expressions, compiled with the re.VERBOSE flag. Each pattern must contain several named groups.

Named groups are like regular groups, but the group starts with ?P<thegroupname>. For example:

(?P<seriesname>.+?)

All patterns must contain a named group seriesname - this is of course the name of the series the filename contains.

You must also match an issue number group. For simple, single issue files use the group issuenumber

If you wish to match multiple issues in one file,