SkillAgentSearch skills...

scenario-zbrush-pose-print

Use when posing a sculpt or preparing it for 3D printing in ZBrush: "pose this character", Transpose Master, TPoseMesh, Gizmo posing with masks, ZSphere rig, Proxy Pose, weapon in the hand, stretching after posing, "3D print this", 1/6 scale statue, miniature, resin or FDM, hollowing, wall thickness…

Install / Use

npx skills add scenario-labs/skills --skill scenario-zbrush-pose-print

Installs into whichever agent you are using.

About this skill
📄

SKILL.md

Installable skill definition

Quality Score

86/100

Category

Marketing

Supported Platforms

Universal

Tags

Our assessment of scenario-zbrush-pose-print

scenario-zbrush-pose-print scores 86/100 on our quality scale, 397th of 639 Marketing skills we index.

Its SKILL.md is 20 KB long, well organised into 11 sections and no code examples: a thorough specification that gives an agent plenty to work with.

With 1,048 GitHub stars, it is one of the more widely adopted skills in the catalogue.

Substance
30/30
Structure
13/20
Description
15/15
Adoption
13/20
Freshness
15/15

Maintenance, license and trust

  • The repository was last updated 35 days ago, so scenario-zbrush-pose-print is actively maintained.
  • It is released under the MIT license, a permissive license that allows use, modification and commercial use with attribution.
  • Its trust signals score 100/100, with no cautions. These come from repository metadata, not a code audit — read the skill file before letting an agent act on it.

Safety scan

No issues found

Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands.

Automated pattern scan on 2026-11-20. It catches known dangerous patterns, not every risk — read a skill before letting an agent act on it.

scenario-zbrush-pose-print compared with similar skills

All 4 of these similar skills score higher than scenario-zbrush-pose-print; compare them before choosing.

SkillScoreStarsUpdatedFormat
scenario-zbrush-pose-print (this skill)by scenario-labs861.0k35d agoSKILL.md
algorithmic-artby anthropics100177.9k2mo agoSKILL.md
pptxby anthropics100177.9k2mo agoSKILL.md
prospectingby coreyhaines3110060.1k11d agoSKILL.md
ad-creativeby coreyhaines3110060.1k11d agoSKILL.md

Frequently asked questions

How do I install scenario-zbrush-pose-print?
Run npx skills add scenario-labs/skills --skill scenario-zbrush-pose-print. The install tabs above show the steps for each supported agent.
Which AI agents does scenario-zbrush-pose-print work with?
It is written for Universal, as a SKILL.md file. Other agents that read the same format can often use it too.
Is scenario-zbrush-pose-print safe to use?
Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands. It is MIT-licensed and scores 100/100 on trust signals. Skills are instructions an agent will follow, so read the file before installing it and do not approve commands you do not understand.
Is scenario-zbrush-pose-print still maintained?
The repository was last updated 35 days ago, so scenario-zbrush-pose-print is actively maintained.

name: scenario-zbrush-pose-print description: 'Use when posing a sculpt or preparing it for 3D printing in ZBrush: "pose this character", Transpose Master, TPoseMesh, Gizmo posing with masks, ZSphere rig, Proxy Pose, weapon in the hand, stretching after posing, "3D print this", 1/6 scale statue, miniature, resin or FDM, hollowing, wall thickness, drain holes, keys and pins, cutting into parts, 3D Print Hub, Scale Master, Decimation Master, STL or 3MF, size in millimeters.' license: MIT

ZBrush posing and 3D print

Expert level means a pose that stands and reads, transferred onto every SubTool without losing a level, and print parts whose size, walls, fits and cavities were measured in millimeters on the exported files. The stance: turn every decision into a number the agent can check (scale, point order, joint angles, walls, gaps), keep the pose reversible, use strokes only for cleanup. If a sibling skill named here is missing from your available skills, load it with skill_get (Scenario MCP) or ask the user to install it (https://github.com/scenario-labs/skills#install); unattended, proceed from tool schemas and flag the gap.

REQUIRED BACKGROUND: scenario-zbrush-expert (bridge, stroke engine, review loop, 2026 traps).

Stance (the expert delta)

  • Gaboury: scale is the first decision. SubTool number one is a box at the client's size; nothing may clip out of it, and the whole tool resizes in one step because sizes change late (6 in with 15 points of articulation became 4 in with 8). Agent form: brief_box, zb_print.envelope, set_export_scale(target_mm).
  • Munoz Gomez: pose at the lowest level, several SubTools through Transpose Master, the pose on a 3D Layer. Plates and carried props (weapon, shield, staff) stay IN the TPose mesh as rigid pieces (Auto Groups, one group per loose piece, masked whole); Move Topological clears intersections. Plouffe forbids deforming primitives, not moving them rigidly: never pull a carried prop out and re-place it with one rotation.
  • Maxon doc: two things destroy a transfer: a partially hidden SubTool (Vertex Mismatch) and Gizmo 3D deformers on the TPose mesh (they reorder points; SubTools die on TPose>SubT). Pavlovich: "The order of the vertices is very important." Start from a clean project, save the ZPR while a TPose mesh exists (the Transpose Master data lives there).
  • Plouffe: parts that bend together need the same polygon size at level 1 (mask blur spreads per polygon). Re-place bolts and discs after bending. Spend detail only where the final size and viewing distance show it.
  • Pavlovich: DynaMesh without levels = Proxy Pose plus a ZSphere rig. Location beats size, helpers hold volume, rotate only.
  • Gaboury: never hollow the 9M sculpt. Shell a light DynaMesh copy (128 was enough for a 9 in car), keep its inner wall, Polish it, subtract it from the untouched detailed part in Live Boolean. Create Shell Thickness is not millimeters: measure.
  • Bennett (Hasbro): 1 mm minimum wall (0.85 mm was flagged), 0.5 mm edges, 0.12 mm fit offset for Formlabs parts; thin walls are thickened from the inside so the outside does not change.
  • Gaboury: decimate by eye (about 1M per mesh is plenty; 10k to 20k triangles can still print); masks on the detail that matters (face, hands) steer Decimation Master; pre-process again after any edit; vent every cup on SLA.

Establish first

| Input | Why it changes the plan | Default when the brief is silent | | --------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------------ | | Process: resin (SLA, MSLA), FDM, molded or cast | walls, clearance, hollowing, shrink (Hasbro sculpts PVC at 104 %); molds add Hasbro's rules: touching fingers lock the mold, Group Front shows the parting line, Draw Draft Analysis shows draft | resin, direct print | | Size: ratio and real height, envelope W x H x D, base included or not | export scale, brief box, feature floor | 1/6 = standing height / 6 (1,800 mm gives 300 mm), measured on the rest pose | | Printer volume, slicer caps | splits (Gaboury split a car for the Form 2 bed); polycount or file caps (his example: 50 MB) | ask; report each part's size | | Parts: one piece or kit, glued or pegged | cuts and keys (Carratala plans cuts while sculpting) | natural breaks (collar, belt, cuffs, weapon at the hand), two keys per glued joint [added] | | Pose source; alternate poses | route and layers | one layer per pose | | Deliverable | STL has no units; 3MF declares them | STL and 3MF per part in mm, JSON report |

Posing without a mouse

The artists' default (Ctrl+click a polygroup, drag a Gizmo ring) is a canvas gesture. The SDK cannot read mask data, and press_key is documented but marked "Does not work, hidden for now" in the installed 2026 stub (with canvas_click it is reported unreliable, Maxon forum). Routes by determinism:

| Route | When | How | Status | | ----------------------------------------------------------------- | ---------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------- | | A. Numeric external rig (Munoz Gomez's Blender route, made exact) | humanoids, extreme or many poses | TPoseMesh, export_tpose, loose_pieces weighted rigidly to one bone each, scenario-blender-rigging poses by angle and returns the same order, import_pose, TPose>SubT | deterministic; guards tested offline | | B. ZSphere rig by code | in ZBrush, organic, or DynaMesh via Proxy Pose | joints from polygroup borders, zs_build, forward kinematics zs_pose | FK tested; bound mesh following API edits [verify live_p02] | | C. Whole-SubTool rigid moves | a base, a stand, a prop added after posing | rotate_subtool_matrix (X, Y, Z) plus translate_subtool, the carrier's whole transform, corrected from exports | math tested; signs [verify live_p03, p08] | | D. Mask plus Gizmo or action line | cleanup by a computer-use agent or a human | Ctrl+click group, Alt pivot, drag | weak for this agent |

Weak without a human: gesture design, Plouffe's hand-painted gradient masks, large fold redesign. Seam smoothing and Move Topological have agent forms in procedures.md P6, still [verify].

Workflow

zb_pose.call("name", ...) runs inside ZBrush; zb_print runs on exported OBJs; full code in references/procedures.md.

  1. Intake. Versioned ZTL, inventory(), target and envelope in mm. GATE: every SubTool named, unique, with points and levels.
  2. Scale. set_export_scale, export_parts, check_scale, then brief_box (hidden while exporting). GATE: height within 0.5 % [added], one export scale on every part (a part appended from another ZTool arrives at another scale), envelope ok, named dimensions checked with caliper.
  3. Pose prep. clean_project (ZTL saved, default project, Load Tool); polygroup every segment, plates and props left as loose pieces; preflight_tpose. GATE: preflight ok, density spread under 2x [added]. No levels: scenario-zbrush-retopology-export or Proxy Pose.
  4. Pose. tpose_mesh(layer=True, groups=True) with props and plates visible, export_tpose (the order reference), save_project; route A or B, center first, parents before children, rotations only; no Gizmo deformers. GATE: rigid_pieces ok, follows puts each carried prop where its carrier took it (0.5 mm [added]), piece_interference empty or listed for P6, tpose_to_subtools(expected, rest_obj) passes its order guard and point counts, rigid_delta within 2 degrees of the plan [added], balance stands or a base is planned; review sheet: silhouette and weight read (Plouffe: an unstable pose "destroys the entire work").
  5. Fix deformation. New layer at the top level. Seam first while the rest is protected (Munoz Gomez smooths and moves before clearing the mask); then volumes and folds re-sculpted for the new pose (tension from the stretched joint, compression on the inner bend [added]); re-place primitives; Move Topological on pieces; pose-specific detail on a pose-only layer, because layers blend linearly. GATE: stretch_report near the rest pose, piece_interference ok, Polyframe tiles.
  6. Breakdown. Parts at natural breaks; merge what prints as one (Live Boolean union or DynaMesh on light copies: Hasbro engineers on decimated meshes). Molded: loops, parting line, draft. GATE: each part closed, fits the build volume.
  7. Hollow when asked. hollow_copy (insert inside, DynaMesh about 128, Create Shell), keep_inner_shell, Live Boolean: detailed part start, inner shell, drain and vents subtract; thin ends stay solid. Too thin: move the cutter inward, never the outside. GATE: thickness p01 at the wall target, no sealed cavity for resin, outer_drift ok, vents at cups.
  8. Cut and key. Cutter QCube in Live Boolean or a polygroup split then Close Holes [added]; plan_keys; socket = peg grown by 2 x clearance. GATE: clearance median at target, no interference; one key pair test-printed before the kit (Gaboury).
  9. Decimate. Unique names; per-SubTool budgets, masks before Pre-process (`mask="cavi

Truncated for display — read the full file on GitHub.

Related Skills

View on GitHub
GitHub Stars1.0k
CategoryMarketing
Updated1mo ago
Forks129

Languages

Python

Trust signals

100/100

From repository metadata: license, adoption, age and documentation. Not a code audit — see the Safety scan above for what the skill file itself contains.

No cautions