myComfortClient

Windhager myComfort Python client for Home Assistant

Usage

This module is intended to use inside HA to interact as a client of RC7030 gateway (myComfort). You can get your credentials on https://connect.windhager.com/

Here is the manual usage of the module :

python3 -m mycomfortclient --help
usage: mycomfortclient [-h] --hostname HOSTNAME [--port PORT] --username
                   USERNAME --password PASSWORD [--cache CACHE] [--debug]

optional arguments:
  -h, --help           show this help message and exit
  --hostname HOSTNAME
  --port PORT
  --username USERNAME
  --password PASSWORD
  --cache CACHE
  --debug

Example

Here is what you should get in a real world :

Boiler serial_no : 0700183ec901
Boiler Alarm : OK
Boiler actual temperature : 35.77
Boiler setpoint temperature : 0.0
Boiler exhaust temperature : 31.4
Boiler operating hours : 991
Boiler current output : 0
Boiler current mode : Stand-by
Boiler cleaning stage 1 : 516
Boiler cleaning stage 2 : 1566
Boiler full service : 3666
Boiler burner starts : 939
Boiler pellet consumption since bulk fill : 1.78
Boiler pellet consumption total : 1.78
Module serial_no : 07024a742a01
Outside temperature : 11.8
Actual flow temperature : 16.9
Setpoint flow temperature : 0.0
Actual DHW temperature : 14.4
Setpoint DHW temperature : 10.0
Active program : Stand-by
Operation mode : Stand-by
Burner active : False
Room temperature setpoint : 5.0
Module serial_no : 07024a749b01
Outside temperature : 11.8
Actual flow temperature : 17.1
Setpoint flow temperature : 0.0
Active program : Heating program 1
Operation mode : Stand-by heating limit
Burner active : False
Room temperature setpoint : 13.0    

Limitations

It doesn't handle thermostat for now (I don't have anyone to test). It it only tested on a Windhager Biowin II heater (for now).