rou2exOS Rusted Edition

A second iteration of the RoureXOS operating system, rewritten in Rust.

• Original RoureXOS (a blog post)
• rou2exOS Rusted Edition (a blog post)

The goal of this project is to make the rou2exOS kernel to follow the microkernel architecture. For purposes of the external program development, there are two key links to consider opening when thinking about extending the system:

• ABI specification document
• Syscall client implementation examples (aka rou2exOS Apps)

To run the OS, you can use the attached ISO image from any Release, and run it in QEMU emulator. The system was also tested on the x86_64 baremetal (booted from the USB flash disk). To enable the filesystem functionalities, attach a IMG file to QEMU as well (in virtual floppy drive A).

qemu-system-x86_64 -boot d -cdrom r2.iso -fda fat.img

Preview

^ v0.10.2: kernel init process output

^ v0.10.4: external executable output + clock process

Legacy

^v0.10.1: kernel init process output

How to build and run from source

# install Rust and its dependencies
make init

# make sure you have `xorriso`, `net-tools` and `grub2-tools` (or just grub-tools) 
# installed (Linux)
dnf install xorriso net-tools grub2-tools qemu qemu-common qemu-system-x86 mtools lld

# compile the kernel and stage2 bootloader, link it into an ELF binary and bake into an ISO
# image with GRUB bootloader
make build

# run the QEMU emulation with ISO image
make run_iso

# create a floppy image and attach it to virtual machine (will enable filesystem-related features)
# please do note that the floppy image is overwritten every time you hit this target
make run_iso_floppy

# (alternative) run the kernel exclusively only (needs the `bootloader` dependency in 
# Cargo.toml to be added)
cargo bootimage
make run

How to test ICMP/SLIP

Start a virtual machine to receive the pty handle:

make run_iso

char device redirected to /dev/pts/3 (label serial0)

Listen for SLIP packets and create a sl0 interface:

sudo slattach -L -p slip -s 115200 /dev/pts/3
sudo ifconfig sl0 192.168.3.1 pointopoint 192.168.3.2 up

Catch packets using tcpdump:

sudo tcpdump -i sl0

Run the response command in the system shell to handle ICMP

response

Now you should be able to ping the machine from your machine

ping 192.168.3.2

How to convert and import a font (graphics mode)

Download a font (ideally in PSF format), add the selected font file into src/video/fonts as console.psf.

To convert a font from BDF format use the bdf2psf utility (should be available in the Linux distro repos). We especially want to render the font to Framebuffer (--fb flag). An example command syntax is shown below.

bdf2psf --fb terminus-font-4.49.1/ter-u16b.bdf /usr/share/bdf2psf/standard.equivalents /usr/share/bdf2psf/ascii.set 256 console.psf