SkillAgentSearch skills...

F1c100s

f1c100s source code

GenerateConvertImprove

Install / Use

/learn @hcly/F1c100s
About this skill

Quality Score

0/100

Supported Platforms

Universal

README

f1c100s 128MB W25N01G spi nand调试记录

最新源码

uboot
kernel
filesystem and images

镜像使用说明

镜像位置images文件夹 uboot-with-spl-usb.bin　FEL模式下使用的uboot镜像 uboot-with-spl-spinand.bin spi nand启动使用的uboot镜像 FEL模式下使用标准sunxi-fel执行如下命令

sunxi-fel uboot uboot-with-spl-usb.bin write 0x80000000 uboot-with-spl-spinand.bin

由于sunxi-fel直接写spi nand代码没有调试过，所以直接将uboot镜像传到内存后写入spi nand 执行完成，等待u-boot倒计时完后会自动将uboot-with-spl-spinand.bin写入spi nand中 FEL模式日志

U-Boot SPL 2018.01-g5a65529-dirty (Dec 17 2019 - 15:19:40)
DRAM: 64 MiB
Trying to boot from FEL


U-Boot 2018.01-g5a65529-dirty (Dec 17 2019 - 15:19:40 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SPI-NAND: W25N01GV is found size: 128MB.
read status2:0x18
internal ecc is on now turn off
write status2:0x8
read status2:0x8
*** Warning - bad CRC, using default environment

In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0 
SPI-NAND: W25N01GV is found size: 128MB.
read status2:0x18
internal ecc is on now turn off
write status2:0x8
read status2:0x8
SPI-NAND: 1310720 bytes @ 0x0 Updated: OK
SPI-NAND: W25N01GV is found size: 128MB.
read status2:0x18
internal ecc is on now turn off
write status2:0x8
read status2:0x8
SPI-NAND: 2490368 bytes @ 0x80000 Read: OK
Unknown command 'sf' - try 'help'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
=>

因为没有内核所以最后会报错，不用管,烧录完成后spi nand启动日志如下

U-Boot SPL 2018.01-g5a65529-dirty (Dec 17 2019 - 15:20:01)
DRAM: 64 MiB
Trying to boot from sunxi SPI


U-Boot 2018.01-g5a65529-dirty (Dec 17 2019 - 15:20:01 +0800) Allwinner Technology

CPU:   Allwinner F Series (SUNIV)
Model: Lichee Pi Nano
DRAM:  64 MiB
MMC:   SUNXI SD/MMC: 0
SPI-NAND: W25N01GV is found size: 128MB.
read status2:0x18
internal ecc is on now turn off
write status2:0x8
read status2:0x8
*** Warning - bad CRC, using default environment

In:    serial@1c25000
Out:   serial@1c25000
Err:   serial@1c25000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0 
=>

源码编译

源码编译需要编译两次，分别生成FEL镜像和SPI NAND镜像 首先修改uboot源码下build.sh中交叉编译器

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- licheepi_nano_spinand_defconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j8

我的交叉编译工具已经加入到了系统环境变量

生成FEL镜像

修改uboot源码include/configs/sunxi-common.h 打开#define GZYS_USBBURN 1定义

#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H

#include <asm/arch/cpu.h>
#include <linux/stringify.h>
#define GZYS_USBBURN	1
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT

保存后在uboot源码根目录下执行./build.sh进行编译，最后输出信息如下

  CC      spl/drivers/mtd/spi/sunxi_spi_nand_spl.o
  CC      spl/drivers/serial/serial.o
  CC      spl/drivers/serial/serial_ns16550.o
  CC      spl/drivers/serial/ns16550.o
  LD      spl/disk/built-in.o
  LD      spl/lib/built-in.o
  LD      spl/drivers/serial/built-in.o
  LD      spl/drivers/mmc/built-in.o
  LD      spl/drivers/built-in.o
  LD      spl/u-boot-spl
  OBJCOPY spl/u-boot-spl-nodtb.bin
  COPY    spl/u-boot-spl.bin
  MKSUNXI spl/sunxi-spl.bin
  BINMAN  u-boot-sunxi-with-spl.bin
  CFGCHK  u-boot.cfg
please delete GZYS_USBBURN in include/configs/sunxi-common.h file and rebuild to create spi nand image
DONE

此时uboot源码根目录下会生成uboot-with-spl-usb.bin文件

生成SPI NAND镜像

修改uboot源码include/configs/sunxi-common.h 注释掉#define GZYS_USBBURN 1定义

#ifndef _SUNXI_COMMON_CONFIG_H
#define _SUNXI_COMMON_CONFIG_H

#include <asm/arch/cpu.h>
#include <linux/stringify.h>
/* #define GZYS_USBBURN	1 */
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT

保存后在uboot源码根目录下执行./build.sh进行编译，最后输出信息如下

Copying block 23 to 46
1+0 records in
1+0 records out
1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000163137 s, 6.3 MB/s
Copying block 24 to 48
1+0 records in
1+0 records out
1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000174752 s, 5.9 MB/s
Copying block 25 to 50
1+0 records in
1+0 records out
1024 bytes (1.0 kB, 1.0 KiB) copied, 0.000165035 s, 6.2 MB/s
Appending u-boot
984+0 records in
984+0 records out
1007616 bytes (1.0 MB, 984 KiB) copied, 0.00353802 s, 285 MB/s
done
burn uboot-with-spl-spinand.bin to spi nand
cmd is sunxi-fel uboot uboot-with-spl-usb.bin write 0x80000000 uboot-with-spl-spinand.bin
DONE

此时uboot源码根目录下会生成uboot-with-spl-spinand.bin文件

调试中出现的问题及修改

uboot源码增加对w25n01g支持

diff --git a/drivers/mtd/spi-nand/spi-nand-base.c b/drivers/mtd/spi-nand/spi-nand-base.c
index 442a595..bee8a93 100755
--- a/drivers/mtd/spi-nand/spi-nand-base.c
+++ b/drivers/mtd/spi-nand/spi-nand-base.c
@@ -25,6 +25,8 @@ extern int spi_nand_issue_cmd(struct spi_nand_chip *chip, struct spi_nand_cmd *c
 int spi_nand_erase(struct spi_nand_chip *chip, uint64_t addr, uint64_t len);
 
 static struct spi_nand_flash spi_nand_table[] = {
+	SPI_NAND_INFO("W25N01GV", 0xEF, 0xAA, 2048, 64, 64, 1024,
+			1, 1, 0 | SPINAND_NEED_PLANE_SELECT),
 	SPI_NAND_INFO("GD5F1GQ4UAYIG", 0xC8, 0xF1, 2048, 64, 64, 1024,
 			1, 1, 0 | SPINAND_USED_GIGADEVICE),
 	SPI_NAND_INFO("GD5F1GQ4UBYIG", 0xC8, 0xD1, 2048, 64, 64, 1024,
@@ -1844,6 +1846,22 @@ static void spi_nand_set_rd_wr_op(struct spi_nand_chip *chip)
 		chip->write_cache_rdm_op = SPINAND_CMD_PROG_LOAD_RDM_DATA;
 	}
 }
+//add by leijie for w25n01g turn off internal ecc
+static void w25n01_turn_off_iecc(struct spi_nand_chip *chip)
+{
+	u8 buf[1];
+	spi_nand_read_reg(chip,0xb0,buf);
+	printf("read status2:0x%x\n",buf[0]);
+	if(buf[0] & 0x10) {//internal ecc
+		printf("internal ecc is on now turn off\n");
+		buf[0] = buf[0] & ~(1 << 4);
+		printf("write status2:0x%x\n",buf[0]);
+		spi_nand_write_reg(chip,0xb0,buf);
+	}
+	spi_nand_read_reg(chip,0xb0,buf);
+	printf("read status2:0x%x\n",buf[0]);
+	return;
+}
 
 /**
  * spi_nand_init - [Interface] Init SPI-NAND device driver
@@ -1879,8 +1897,9 @@ static int spi_nand_init(struct spi_slave *spi, struct spi_nand_chip **chip_ptr)
 	return -ENODEV;
 
 ident_done:
-	spi_nand_info("SPI-NAND: %s is found.\n", chip->name);
-
+	spi_nand_info("SPI-NAND: %s is found size: %dMB.\n", chip->name,chip->size/1024/1024);
+	if(id[0] == 0xef)
+		w25n01_turn_off_iecc(chip);
 	// giga-device need re-config rd/wr options
 	if( chip->options & SPINAND_USED_GIGADEVICE )
 		spi_nand_set_rd_wr_op(chip);

主要增加了wn25n01内部ecc判断

20191226后面发现spi nand驱动中有对内部ecc进行判断 所以需要把增加的w25n01_turn_off_iecc函数删除,这里源码就不进行更新了

spi nand镜像脚本制作

参照 https://whycan.cn/t_1594.html 中的脚本 gen_sunxi_spinand_onlyboot_img.sh 制作了f1c100_uboot_spinand.sh

#!/bin/bash

set -e
[ $# -eq 2 ] || {
    echo "SYNTAX: $0 <outputfile> <u-boot image>"
    echo "Given: $@"
    exit 1
}

OUTPUT="$1"
UBOOT="$2"
PAGESIZE=2048
BLOCKSIZE=128

TOOLCHECK=$(od --help | grep 'endia')
if [ "$TOOLCHECK" == "" ]; then
	echo "od cmd is too old not support endia"
	exit -1
fi
# SPL-Size is an uint32 at 16 bytes offset contained in the SPL header
#uboot header offset head in include/configs/sunxi-common.h CONFIG_SYS_SPI_U_BOOT_OFFS so spl max size is CONFIG_SYS_SPI_U_BOOT_OFFS
#f1c100s modify CONFIG_SYS_SPI_U_BOOT_OFFS to 0xd000(52K)
SPLSIZE=$(od -An -t u4 -j16 -N4 "$UBOOT" | xargs)
printf "SPLSIZE:%d(0x%x)\n" $SPLSIZE $SPLSIZE
# The u-boot size is an uint32 at (0xd000 + 12) bytes offset uboot start offset 0xd000(52K)
UBOOTSIZE=$(od --endian=big -An -t u4 -j$((53248 + 12)) -N4 "$UBOOT" | xargs)
printf "UBOOTSIZE:%d(0x%x)\n" $UBOOTSIZE $UBOOTSIZE
ALIGNCHECK=$(($PAGESIZE%1024))
if [ "$ALIGNCHECK" -ne "0" ]; then
	echo "Page-size is not 1k alignable and thus not supported by EGON"
	exit -1
fi

KPAGESIZE=$(($PAGESIZE/1024))
SPLBLOCKS=25

echo "Generating boot0 for boot part of max size 0x8000 SPLBLOCKS:$SPLBLOCKS"
dd if="/dev/zero" of="$OUTPUT" bs=1024 count=$((52 - $SPLBLOCKS))

for splcopy in `seq 0 $SPLBLOCKS`;
do
	to=$(($splcopy*$KPAGESIZE))
	echo "Copying block $splcopy to $to" 
	dd if="$UBOOT" of="$OUTPUT" bs=1024 count=1 seek=$to skip=$splcopy conv=notrunc
done

echo "Appending u-boot"
dd if="$UBOOT" of="$OUTPUT" bs=1024 seek=52 skip=52 conv=notrunc
sync
echo "done"

其中将页大小和块大小值固定,只传输出文件和输入文件名

由于f1c100s生成的spl镜像sunxi-spl.bin大小为固定值24576个字节，所以简化了脚本

内部brom spi nand启动必需1KB对齐所以将spl镜像放大两倍后小于52KB,暂使用52K这个值

也就是说spl镜像最大为52KB,同时uboot镜像的起始地址为0xd000(52KB)

同时需要修改uboot源码include/configs/sunxi-common.h中的CONFIG_SYS_SPI_U_BOOT_OFFS为0xd000

和CONFIG_SPL_PAD_TO为CONFIG_SYS_SPI_U_BOOT_OFFS

这里有个地方要注意下，如果在FEL模式下运行uboot镜像，需要将CONFIG_SYS_SPI_U_BOOT_OFFS改回0x8000,不然sunxi-fel会报错

启动报错

U-Boot SPL 2018.01-g5a65529-dirty (Dec 17 2019 - 15:20:01)
DRAM: 64 MiB
Trying to boot from sunxi SPI

从spi nand启动卡在上面这个地方，通过加调试信息找到了一个问题 支持spi nand的uboot源码drivers/mtd/spi/sunxi_spi_nand_spl.c 在函数 static u32 sunxi_spi0_read_data中addr默认加了0x8000 需要把这个注释掉

index f70e1ac..0e2a60d 100644
--- a/drivers/mtd/spi/sunxi_spi_nand_spl.c
+++ b/drivers/mtd/spi/sunxi_spi_nand_spl.c
@@ -266,7 +266,7 @@ static u32 sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
 #ifdef CONFIG_SPINAND
 {
 	u32 ret = bufsize;
-	addr += 0x8000;
+	//addr += 0x8000; //modify by leijie
 	int page = addr >> 11;
 	if( pages != page ) { // need read to cache
 		writel(4, spi_bc_reg); /* Burst counter (total bytes) */

Related Skills

node-connect

342.0k

Diagnose OpenClaw node connection and pairing failures for Android, iOS, and macOS companion apps

frontend-design

84.7k

Create distinctive, production-grade frontend interfaces with high design quality. Use this skill when the user asks to build web components, pages, or applications. Generates creative, polished code that avoids generic AI aesthetics.

openai-whisper-api

342.0k

Transcribe audio via OpenAI Audio Transcriptions API (Whisper).

commit-push-pr

84.7k

Commit, push, and open a PR

hcly

View profile

View on GitHub
GitHub Stars33
CategoryDevelopment
Updated7mo ago
Forks36
hcly/f1c100s

Languages

C

Security Score

62/100

Audited on Aug 19, 2025

No findings