networkdevice

networkdevice

Python modules to execut command on remote network device.

1. Introduction

networkdevice is a python module that allow you run command on remote network devices just like locally.

For example, define a network devices and show the interface on it, it's especially useful for network test automation:

pc = networkdevice.LinuxDevice(device)
print pc.cmd("ifconfig")

See demo/ftp_test.py for examples and use help command show the documents.

import from networkdevice import junos, linux
help(cisco)
help(junos)
help(linux)

2. Feature

1) Python Based: Plenty of feature
2) Environmentally friendly: can run anywhere where there is python and connect to the devices.
3) Easy to Learn: Don't need to know anything about Python
4) Easy to write: One case only have several to dozens of lines.
5) Faster: run the testbed from local and is much faster.
6) object oriented: Flexible and Easy to extend
7) WYWIWYT(What you write is what you think): Not write SCRIPT, but write ACTION and THOUGHT

3. Test architecture based on networkdevice

       +---------------------------------+------------+----------------------+
       |                                 |            | case1                |
       |                                 |            +----------------------+
       |  One case                       | Test Suite | ...                  |
       |                                 |            +----------------------+
       |                                 |            | caseN                |
       +---------------------------------+------------+----------------------+
       |  networkdevice                                                      |
       |                                                                     |
       |  PC1                  DUT                  DUT                      |
       |  +---------------+    +---------------+    +---------------+        |
       |  | Linux devices |    | Junos devices |    | Cisco devices |  ...   |
       |  +---------------+    +---------------+    +---------------+        |
       |                       | Linux devices |    | Linux devices |  ...   |
       |                       +---------------+    +---------------+        |
       +---------------------------------------------------------------------+

               Figure 1. test Architecture based on networkdevice

4. An example

    #!/usr/bin/env python

    from networkdevice import cisco, junos, linux

    tangshan = {
            "name": "tangshan",
            "host": "tangshan",
            "username": "dev",
            "password": "1234",
            "root_password": "5678",
            "interface": [
                { "ip": "1.1.1.2/24", "ip6": "2001::2/64", "name": "fe-0/0/2.0", "zone": "untrust" },
                { "ip": "4.4.4.1/24", "ip6": "2004::1/64", "name": "fe-0/0/6.0", "zone": "trust" }],
            "preconfig": [ "set routing-options static route 1.1.1.0/24 next-hop 2.2.2.1"] 
            }

    ent_vm01 = { "name": "ent-vm01",
            "host": "ent-vm01",
            "prompt": "root@ent-vm01 ~",
            "username": "root",
            "password": "5678",
            }

    if __name__ == '__main__':
        '''
        Topology:

                             +----------+
                             |  server  |
                             +----+-----+
                                  | int0
                                  |
                                  | int0
                             +----+-----+
                             |   DUT    |
                             +----------+
                                  | int1
                                  |
                                  | int0
                             +----+-----+
                             |  client  |
                             +----------+
        '''
        # Use device descriptor to create a linux and junos device
        dut = junos.JunosDevice(tangshan)
        client = linux.LinuxDevice(ent_vm01)
        # Use parameter list to create a linux device
        server = linux.LinuxDevice(name = "ent-vm02", host = "ent-vm02",
                prompt = "root@ent-vm02 ~", username = "root", password = "5678")

        # Dump all the dut's attributes
        dut.dumps()

        # execute a non-interactive command and return the result
        print client.cmd('date')

        # execute an interactive command
        client.cmd('ftp 1.1.1.2', expect = "Name")
        client.cmd('%s' %(server["username"]), expect = "Password")
        client.cmd('%s' %(server["password"]), expect = "ftp")
        print client.cmd('ls', expect = "ftp")

        # check session on the Juniper srx firewall
        print dut.cli('show security flow session application ftp')
        # check session in dict format
        displayed = dut.cli('show security flow session application ftp',
                format = "dict",
                force_list=('flow-session'))
        print "Total %s session found" %(displayed['flow-session-information']['displayed-session-count'])

        # tear down the ftp session
        client.cmd('bye')