SSD1322 OLED display driver

Pure Rust driver for the SSD1322 OLED display chip, for use with embedded-hal.

Description

This driver is intended to work on embedded platforms using the embedded-hal trait library. It is no_std, contains no added unsafe, and does not require an allocator. The initial release supports the 4-wire SPI interface.

Because the SSD1322 supports displays as large as 480x128 @ 4bpp, the primary API uses a Region abstraction to allow writing a stream of pixel data from an iterator onto a rectangular sub-region of the display area. This avoids the requirement to buffer the entire display RAM in the host, since such a buffer would consume a colossal (for a μC) 30kiB of RAM.

Missing features:

• embedded-graphics Drawing support.
• Parallel interface support.
• Chip select and bus sharing (assumes /CS is tied low).
• Text mode and/or fonts.

Acknowledgements

jamwaffles/ssd1306 for internal design inspiration. japaric/embedded-hal for making dealing with embedded hardware easy, safe, and enjoyable.

License

Licensed under either of

• Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.