shims

As of Cats 2.3.0 (and above), most major instances are included in the implicit scope without requiring extra imports. This is tremendously convenient for users, but it fundamentally breaks Shims, since any scope in which shims is imported along with instances from scalaz results in an unprioritized ambiguity. However, no one really complained about this, despite it being broken for months, which leads me to conclude that this library is no longer needed and may be archived.

This repository is left up for pedagogical reasons, as it is quite interesting to see what techniques are necessary to do something like this in Scala's type system (both Scala 2 and Scala 3). However, I will no longer be maintaining Shims going forward. I recommend everyone who was depending on it to upgrade to Cats at your earliest convenience, as it will provide a generally better experience all around within a more modern ecosystem.

Shims aims to provide a convenient, bidirectional, and transparent set of conversions between scalaz and cats, covering typeclasses (e.g. Monad) and data types (e.g. \/). By that I mean, with shims, anything that has a cats.Functor instance also has a scalaz.Functor instance, and vice versa. Additionally, every convertible scalaz datatype – such as scalaz.State – has an implicitly-added asCats function, while every convertible cats datatype – such as cats.free.Free – has an implicitly-added asScalaz function.

Only a single import is required to enable any and all functionality:

import shims._

Toss that at the top of any files which need to work with APIs written in terms of both frameworks, and everything should behave seamlessly. You can see some examples of this in the test suite, where we run the cats laws-based property tests on scalaz instances of various typeclasses.

Usage

Add the following to your SBT configuration:

libraryDependencies += "com.codecommit" %%% "shims" % "<version>"

Cross-builds are available for Scala 2.12 and 2.13, and Dotty 0.25.0 and 0.26.0-RC1. ScalaJS builds target the 1.x line. It is strongly recommended that you enable the relevant SI-2712 fix in your build if using 2.12. Details here. A large number of conversions will simply not work without partial unification.

Note that shims generally follows epoch.major.minor versioning schemes, meaning that changes in the second component may be breaking. This is mostly because maintaining strict semver with shims would be immensely difficult due to the way the conversions interact. Shims is more of a leaf-level project, anyway, so semantic versioning is somewhat less critical here. Feel free to open an issue and make your case if you disagree, though.

Once you have the dependency installed, simply add the following import to any scopes which require cats-scalaz interop:

import shims._

That's it!

Effect Types

You can also use shims to bridge the gap between the older scalaz Task hierarchy and newer frameworks which assume cats-effect typeclasses and similar:

libraryDependencies += "com.codecommit" %% "shims-effect" % "<version>"

import shims.effect._

For more information, see the shims-effect subproject readme.

Upstream Dependencies

• cats 2.0.0
• scalaz 7.2.28

At present, there is no complex build matrix of craziness to provide support for other major versions of each library. This will probably come in time, when I've become sad and jaded, and possibly when I have received a pull request for it.

Quick Example

In this example, we build a data structure using both scalaz's IList and cats' Eval, and then we use the cats Traverse implicit syntax, which necessitates performing multiple transparent conversions. Then, at the end, we convert the cats Eval into a scalaz Trampoline using the explicit asScalaz converter.

import shims._

import cats.Eval
import cats.syntax.traverse._
import scalaz.{IList, Trampoline}

val example: IList[Eval[Int]] = IList(Eval.now(1), Eval.now(2), Eval.now(3))

val sequenced: Eval[IList[Int]] = example.sequence
val converted: Trampoline[IList[Int]] = sequenced.asScalaz

Conversions

Typeclasses

Typeclass conversions are transparent, meaning that they will materialize fully implicitly without any syntactic interaction. Effectively, this means that all cats monads are scalaz monads and vice versa.

What follows is an alphabetized list (in terms of cats types) of typeclasses which are bidirectionally converted. In all cases except where noted, the conversion is exactly as trivial as it seems.

• Alternative
  • Note that MonadPlus doesn't exist in Cats. I'm not sure if this is an oversight. At present, no conversions are attempted, even when Alternative and FlatMap are present for a given F[_]. Change my mind.
• Applicative
• Apply
• Arrow
• Choice
  • Requires a Bifunctor[F] in addition to a Choice[F]. This is because scalaz produces a A \/ B, while cats produces an Either[A, B].
• Bifoldable
• Bifunctor
• Bitraverse
• Category
• Choice
• CoflatMap
• Comonad
• Compose
• Contravariant
• Distributive
• Eq
• FlatMap
  • Requires Bind[F] and either BindRec[F] or Applicative[F]. This is because the cats equivalent of scalaz.Bind is actually scalaz.BindRec. If an instance of BindRec is visible, it will be used to implement the tailRecM function. Otherwise, a stack-unsafe tailRecM will be implemented in terms of flatMap and point.
  • The cats → scalaz conversion materializes scalaz.BindRec; there is no conversion which just materializes Bind.
• Foldable
• Functor
• InjectK
  • This conversion is weird, because we can materialize a cats.InjectK given a scalaz.Inject, but we cannot go in the other direction because scalaz.Inject is sealed.
• Invariant (functor)
• Monad
  • Requires Monad[F] and optionally BindRec[F]. Similar to FlatMap, this is because cats.Monad constrains F to define a tailRecM function, which may or may not be available on an arbitrary scalaz.Monad. If BindRec[F] is available, it will be used to implement tailRecM. Otherwise, a stack-unsafe tailRecM will be implemented in terms of flatMap and point.
  • The cats → scalaz conversion materializes scalaz.Monad[F] with scalaz.BindRec[F], reflecting the fact that cats provides a tailRecM.
• MonadError
  • Similar requirements to Monad
• Monoid
• MonoidK
• Order
• Profunctor
• Representable
• Semigroup
• SemigroupK
• Show
• Strong
• Traverse

Note that some typeclasses exist in one framework but not in the other (e.g. Group in cats, or Split in scalaz). In these cases, no conversion is attempted, though practical conversion may be achieved through more specific instances (e.g. Arrow is a subtype of Split, and Arrow will convert).

And don't get me started on the whole Bind vs BindRec mess. I make no excuses for that conversion. Just trying to make things work as reasonably as possible, given the constraints of the upstream frameworks.

Let me know if I missed anything! Comprehensive lists of typeclasses in either framework are hard to come by.

Datatypes

Datatype conversions are explicit, meaning that users must insert syntax which triggers the conversion. In other words, there is no implicit coercion between data types: a method call is required. For example, converting between scalaz.Free and cats.free.Free is done via the following:

val f1: scalaz.Free[F, A] = ???
val f2: cats.free.Free[F, A] = f1.asCats
val f3: scalaz.Free[F, A] = f2.asScalaz

| Cats | Direction | Scalaz | | ------------------------- | :-------: | ------------------------ | | cats.Eval | 👈👉 | scalaz.Free.Trampoline | | cats.Eval | 👈 | scalaz.Name | | cats.Eval | 👈 | scalaz.Need | | cats.Eval | 👈 | scalaz.Value | | cats.arrow.FunctionK | 👈👉 | scalaz.~> | | cats.data.Cokleisli | 👈👉 | scalaz.Cokleisli | | cats.data.Const | 👈👉 | scalaz.Const | | cats.data.EitherK | 👈👉 | scalaz.Coproduct | | cats.data.EitherT | 👈👉 | scalaz.EitherT | | cats.data.IndexedStateT | 👈👉 | scalaz.IndexedStateT | | cats.data.Ior | 👈👉 | scalaz.\&/ | | cats.data.Kleisli | 👈👉 | scalaz.Kleisli | | cats.data.NonEmptyList | 👈👉 | scalaz.NonEmptyList | | cats.data.OneAnd | 👈👉 | scalaz.OneAnd | | cats.data.OptionT | 👈👉 | scalaz.OptionT | | cats.data.OptionT | 👈 | scalaz.MaybeT | | cats.data.RWST | 👈👉 | scalaz.RWST | | cats.data.Validated | 👈👉 | scalaz.Validation | | cats.data.ValidatedNel | 👈👉 | scalaz.ValidationNel | | cats.data.WriterT | 👈👉 | scalaz.WriterT | | cats.free.Free | 👈👉 | scalaz.Free | | scala.Option | 👈 | scalaz.Maybe | | scala.util.Either | 👈👉 | scalaz.\/ |

Note that the asScalaz/asCats mechanism is open and extensible. To enable support for converting some type "cats t