Home GW

A simple and trivial to reproduce HomeGW for cheap 433Mhz based weather stations and sensors.

Introduction

The objective of this library is to decode information coming from weather station units which can be found online very cheap.

Furthermore, this library and the example code hass_serial can be used with Home Assistant through the use of a custom component

Bill of Materials (BOM)

• Arduino (any kind of Arduino will do, including esp8266)
• RF 433Mhz Receiver (I recommend a superheterodyne)
• Breadboard + wires (optianaly a perfboard and soldering iron)
• Antenna (17,4 cm of straigh wire)

Schematics

Plugins

weather

Decodes the "Prologue Temperature Sensor" protocol.

Works with a unbranded weather station sold on ebay.

digoo

Decodes the "Nexus Temperature & Humidity Sensor" protocol.

Works with Digoo DG-R8H 433MHz Wireless Digital Hygrometer Thermometer Weather Station Outdoor Sensor. You can find it online in several stores.

generic

This plugin should work with a broad number of OOK based devices such as power plugs and remotes

fanju

Chinese Weather Station Outdoor Sensor. Supports all station within FANJU brand, ex. PT-3378, FJ3378, FJ3391, FJ3389, FJV4

Examples

dump.ino

This example prints a dump of the raw packet it receives/identifies for each plugin.

hass_serial.ino

This example outputs a JSON object for each packet it decodes.

The example can easily be integrated in a Home Assistant install using the following configuration:

- platform: serial
  serial_port: /dev/ttyUSB0
  baudrate: 115200
  
- platform: template
  sensors:
    weatherstation_temperature:
      friendly_name: "Temperature"
      value_template:  >-
        {% if is_state_attr('sensor.serial_sensor', 'dev' ,'weather') %}
        {{ states.sensor.serial_sensor.attributes.in_temp }}
        {% else %}
        {{ states.sensor.weatherstation_temperature.state }}
        {% endif %}
      unit_of_measurement: "°C"

or through the use of a custom component

Contributors

• Panagiotis
• aquaticus
• danilkorotkov