Remotty - SSH to USB serial console

Use cases

Running an headless server in a remote location is prone to network access issue. Expensive server are addressing this with a management board accessible via a dedicated management network. Looking at you Idrac, ILO, CIMC, IMPI...

Remotty is an ESP32 based, cheap remote serial console, prodiving a secure WiFi SSH access to console enabled on USB ports.

A cheap Openwrt router can acte as a SSH portal and serve a dedicated WiFi management network to several Remotty.

Hardware & Software

Any ESP32 board with usb port and flashed with Arduino. Tested Boards:

• Wemos mini s2 (/dev/ttyACM0) -> Ok but can't be remotely flashed
• LILYGO TTGO T-Display (/dev/ttyUSB0) -> Ok

The libSSH server api is quite tricky, so I use the easylibssh library.

Configuration

Remotty

Uncomment only if OS serial console is not activated.

// Display errors via serial
// #define DEBUG
// #define EASYLIBSSH_DEBUG

You should customize SSH private host key for each microcontroller board.

// Set remotty hostkey
const char *configHOSTKEY = "-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAA
↪AAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZWQyNTUxOQAAACDGogjt/r8zbECmh6lm1UX6Gx+lAmbfG7PsFHTNkQiYQAAAAJD
↪QkgeZ0JIHmQAAAAtzc2gtZWQyNTUxOQAAACDGogjt/r8zbECmh6lm1UX6Gx+lAmbfG7PsFHTNkQiYQAAAAEAhjpXJ4AgPfRC8P
↪uuNIEq0itAFa2pxG0S5iMEe0iAY/saiCO3+vzNsQKaHqWbVRfobH6UCZt8bs+wUdM2RCJhAAAAAAAECAwQFBgcICQoLDA0=\n-
↪----END OPENSSH PRIVATE KEY-----";

Public key authorisation is the only one allowed.

// Set an array of authorized_key for libSSH
const uint8_t EASYLIBSSH_NBAUTHKEY = 2;
const char *EASYLIBSSH_TYPEKEY[] = { "ssh-ed25519",
                                     "ssh-ed25519" };
const char *EASYLIBSSH_AUTHKEY[] = { "AAAAC3NzaC1lZDI1NTE5AAAAIPtooFfereunifeni34345352y/qI2Iys6kkMo6mUHWq",
                                     "AAAAC3NzaC1lZDI1NTE5AAAAIPtooFfcMRdCSSouYMrBpXVG2y/qI2Iys6kkMo6mUHWq" };

Data to connect to your confidential WiFi management network.

// Set local WiFi credentials
const char *configSTASSID = "mySID";
const char *configSTAPSK = "mySECRET";

Linux

Plug the microcontroller and check the TTY name:

$ ls -l /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 Dec 24 00:45 /dev/ttyUSB0

Instantiate the systemd service:

root@minipc1:~# cp /usr/lib/systemd/system/serial-getty@.service /etc/systemd/system/serial-getty@ttyUSB0.service

Customize the service:

root@minipc:~# diff /usr/lib/systemd/system/serial-getty@.service /etc/systemd/system/serial-getty@ttyUSB0.service
34c34
< ExecStart=-/sbin/agetty -o '-p -- \\u' --keep-baud 115200,57600,38400,9600 - $TERM
---
> ExecStart=-/sbin/agetty 115200 %I -8 vt100

Use the service:

root@minipc:~# systemctl enable serial-getty@ttyUSB0.service
root@minipc:~# systemctl start serial-getty@ttyUSB0.service

When connected to the serial console, you can resize the terminal with:

stty rows 50 cols 132

Linux kernel

To do...

Grub

To do...

EFI

To do...

Troubleshooting

How to compile/flash remotty?

Compile:

./arduino-cli compile -b esp32:esp32:esp32 remotty

Flash:

./arduino-cli upload -p /dev/ttyUSB0 -b esp32:esp32:esp32 remotty

Monitor after disabling the agetty console:

./arduino-cli monitor -p /dev/ttyUSB0 -b esp32:esp32:esp32 -c 115200,off,8,none,off,1

arduino-cli upload: [Errno 13] Permission denied: '/dev/ttyUSB0'

esptool.py v3.0-dev
Serial port /dev/ttyUSB0
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 322, in open
    self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
PermissionError: [Errno 13] Permission denied: '/dev/ttyUSB0'

Enaling/Disabling the USB serial console is resetting /dev/ttyUSB0 permission. You need to chmod 666 /dev/ttyUSB0 it.

ssh is not authenticating

Try to specify you private keys and wait for agetty to issue the login prompt:

$ ssh -i ~/.ssh/id_ed25519 192.168.3.131
# Welcome to Remotty - SSH access to serial USB console
Waiting for serial.

Debian GNU/Linux bookworm/sid wize ttyACM0

wize login:

agetty did not start on /dev/ttyUSBx

Did you customize the systemd service as advised?

ESP32 is in undefined state

You can reset it by reflashing it.

What is the Remotty IP?

If you dont want to compile the code with debug mode, you can search for the Remotty IP with the one-liner:

$ IP=1;while [ "$IP" -lt 255 ] ; do echo -n "$IP " ; ssh -i ~/.ssh/id_ed25519 -o ConnectTimeOut=1 192.168.3."$IP" 2>&1 | grep -vF "Connection timed out" ; IP=$(("$IP"+1)) ; done

Just change 192.168.3. with your network and id_ed25519 with your private ssh key.

Next ideas

Hard Reset server with ATX

http://michael.stapelberg.ch/posts/2022-10-09-remote-power-button/

Using true serial console to access old computer

Need to find a old equipment with RS-232 console... @ewpa already release an SSH UART https://www.ewan.cc/node/163 !

Usefull links

https://github.com/arduino/arduino-cli/releases

https://github.com/ewpa/LibSSH-ESP32

https://www.chiark.greenend.org.uk/~sgtatham/putty/

https://www.openssh.com/

https://www.libssh.org/

https://www.coreboot.org/GRUB2#On_a_USB_serial_or_USB_debug_adapter

https://szymonkrajewski.pl/how-to-boot-system-from-usb-using-grub/

https://www.rfc-editor.org/rfc/rfc4252#section-7

http://0pointer.de/blog/projects/serial-console.html