Serial Air Quality Sensors

Data acquisition and logging for Air Quality Sensors with UART interface

Installation

This package can be pip installed. Please visit project site for detailed instructions.

Command Line Tools

This package provides tools for requesting new measurements from the sensors and print them on different formats, save them to a CSV file, or push them to an external service such as an MQTT or InfluxDB server. MQTT or InfluxDB server support requires additional packages. Please visit project site for details.

Particulate Matter Sensors

| Sensor | --sensor-model | PM1 | PM2.5 | PM4 | PM10 | size bins | Other | Tested | | ----------------- | ---------------- | :---: | :---: | :---: | :---: | :-------: | ---------------------- | :----: | | Plantower | | | | | | | | | | PMS1003 (aka G1) | PMSx003 | ✔️ | ✔️ | | ✔️ | 6 | | | | PMS3003 (aka G3) | PMS3003 | ✔️ | ✔️ | | ✔️ | | | ✔️ | | PMS5003 (aka G5) | PMSx003 | ✔️ | ✔️ | | ✔️ | 6 | | | | PMS5003T | PMS5003T | ✔️ | ✔️ | | ✔️ | 4 | temp. & rel.hum. | ✔️ | | PMS5003S | PMS5003S | ✔️ | ✔️ | | ✔️ | 6 | HCHO concentration | | | PMS5003ST | PMS5003ST | ✔️ | ✔️ | | ✔️ | 6 | HCHO, temp. & rel.hum. | | | PMS7003 (aka G7) | PMSx003 | ✔️ | ✔️ | | ✔️ | 6 | | ✔️ | | PMSA003 (aka G10) | PMSx003 | ✔️ | ✔️ | | ✔️ | 6 | | ✔️ | | NovaFitness | | | | | | | | | | SDS011 | SDS01x | | ✔️ | | ✔️ | | | ✔️ | | SDS018 | SDS01x | | ✔️ | | ✔️ | | | | | SDS021 | SDS01x | | ✔️ | | ✔️ | | | | | SDS198 | SDS198 | | | | | | PM100 | ✔️ | | Honeywell | | | | | | | | | | HPMA115S0 | HPMA115S0 | | ✔️ | | ✔️ | | | | | HPMA115C0 | HPMA115C0 | ✔️ | ✔️ | ✔️ | ✔️ | | | ✔️ | | Sensirion | | | | | | | | | | SPS30 | SPS30 | ✔️ | ✔️ | ✔️ | ✔️ | 5 | typical particle size | ✔️ | | Winsen | | | | | | | | | | ZH03B | ZH0xx | ✔️ | ✔️ | ✔️ | | | | | | ZH06-I | ZH0xx | ✔️ | ✔️ | ✔️ | | | | |

Other Sensors

• MCU680: chinese module with a BME680 sensor, a mirocontroller (μC) and 3.3V low-dropout regulator (LDO). The μC acts as I2C/UART bridge, providing outputs from the closed source integration library.
• MHZ19B: infrared CO2 sensor module from Winsen.

Want More Sensors

For more Air Quality sensors open an issue.

Use as a library

PyPMS/pms is meant as a command line application. The project site contain some help for those brave enough to use its internals as a library.

Changelog

• 0.8.1
  • add Python 3.14 support, drop Python 3.9 support
• 0.8.0
  • add Python 3.12 and 3.13 support, drop Python 3.8 support
  • require typer-slim instead of full typer
  • require (optional) paho-mqtt v2+
  • tidy up annotations
• 0.7.1
  • disable logging unless CLI is running PR#37
• 0.7.0
  • add Python 3.11 support and drop Python 3.7 support
  • pre-heat for PMSx003 sensors PR#35
  • open/close methods for granular SensorReader operation PR#33
  • fix HPMA115C0 header #26
• 0.6.2
  • move logger config to CLI module PR#28
• 0.6.1
  • fix pms.sensors.sensirion module name and docs
  • reliably recognize SPS30 sensor #25
• 0.6.0
  • project site
  • reorganize internal modules
    • pms.core: core functionality, such as Sensor and SensorReader
    • pms.sensors: sensor modules grouped by manufacturer
    • pms.extra: extra cli utilities, such as pms influxdb and influxdb mqtt
    • importing from pms.sensor is deprecated, import from pms.core instead
  • plugin architecture
    • load sensor modules from entry points advertized as "pypms.sensors"
    • load extra cli commands from entry points advertized as "pypms.extras"
  • support Winsen PM sensors and MHZ19B infrared CO2 sensor.
  • pm1/pm4/raw2_5/pm2_5 properties, #17
• 0.5.0
  • set username/password with environment variables:
    • $MQTT_USER sets --mqtt-user on pms mqtt and pms bridge
    • $MQTT_USER sets --mqtt-user on pms mqtt and pms bridge
    • $DB_USER sets --db-user on pms influxdb and pms bridge
    • $DB_PASS sets --db-pass on pms influxdb and pms bridge
• 0.4.1
  • info about the sensor observations with pms info
  • fix MCU680 obs.pres typo #16
• 0.4.0
  • capture raw messages with pms csv --capture
  • decode captured messages with pms serial --capture
  • hexdump format with pms serial --format hexdump
  • deprecate subset observation method
• 0.3.1
  • fix influxdb default tags
• 0.3.0
  • option for a fix number of samples
  • PMSx003 consistency check after sleep/wake
• 0.2.*
  • widen project scope from PM sensors to AQ sensors in general
  • support BME680 sensor (MCU680 module)
• 0.1.*
  • widen project scope beyond Plantower PM sensors
  • support NovaFitness, Honeywell and Sensirion PM sensors
  • cli for logging to csv file, InfluxDB server or MQTT server