| :exclamation: Deprecation Notice | |:-| |We want to express our sincere gratitude for your support and contributions to the Hypernova open source project. As we are no longer using this technology internally, we have come to the decision to archive the Hypernova repositories. While we won't be providing further updates or support, the existing code and resources will remain accessible for your reference. We encourage anyone interested to fork the repository and continue the project's legacy independently. Thank you for being a part of this journey and for your patience and understanding.|

Hypernova

A service for server-side rendering your JavaScript views

Why?

First and foremost, server-side rendering is a better user experience compared to just client-side rendering. The user gets the content faster, the webpage is more accessible when JS fails or is disabled, and search engines have an easier time indexing it.

Secondly, it provides a better developer experience. Writing the same markup twice both on the server in your preferred templating library and in JavaScript can be tedious and hard to maintain. Hypernova lets you write all of your view code in a single place without having to sacrifice the user’s experience.

How?

1. A user requests a page on your server.
2. Your server then gathers all the data it needs to render the page.
3. Your server uses a Hypernova client to submit an HTTP request to a Hypernova server.
4. Hypernova server computes all the views into an HTML string and sends them back to the client.
5. Your server then sends down the markup plus the JavaScript to the browser.
6. On the browser, JavaScript is used to progressively enhance the application and make it dynamic.

Terminology

• hypernova/server - Service that accepts data via HTTP request and responds with HTML.
• hypernova - The universal component that takes care of turning your view into the HTML structure it needs to server-render. On the browser it bootstraps the server-rendered markup and runs it.
• hypernova-${client} - This can be something like hypernova-ruby or hypernova-node. It is the client which gives your application the superpower of querying Hypernova and understanding how to fallback to client-rendering in case there is a failure.

Get Started

First you’ll need to install a few packages: the server, the browser component, and the client. For development purposes it is recommended to install either alongside the code you wish to server-render or in the same application.

From here on out we’ll assume you’re using hypernova-ruby and React with hypernova-react.

Node

npm install hypernova --save

This package contains both the server and the client.

Next, lets configure the development server. To keep things simple we can put the configuration in your root folder, it can be named something like hypernova.js.

var hypernova = require('hypernova/server');

hypernova({
  devMode: true,

  getComponent(name) {
    if (name === 'MyComponent.js') {
      return require('./app/assets/javascripts/MyComponent.js');
    }
    return null;
  },

  port: 3030,
});

Only the getComponent function is required for Hypernova. All other configuration options are optional. Notes on getComponent can be found below.

We can run this server by starting it up with node.

node hypernova.js

If all goes well you should see a message that says "Connected". If there is an issue, a stack trace should appear in stderr.

Rails

If your server code is written in a language other than Ruby, then you can build your own client for Hypernova. A spec exists and details on how clients should function as well as fall-back in case of failure.

Add this line to your application’s Gemfile:

gem 'hypernova'

And then execute:

$ bundle

Or install it yourself as:

$ gem install hypernova

Now lets add support on the Rails side for Hypernova. First, we’ll need to create an initializer.

config/initializers/hypernova_initializer.rb

Hypernova.configure do |config|
  config.host = "localhost"
  config.port = 3030            # The port where the node service is listening
end

In your controller, you’ll need an :around_filter so you can opt into Hypernova rendering of view partials.

class SampleController < ApplicationController
  around_filter :hypernova_render_support
end

And then in your view we render_react_component.

<%= render_react_component('MyComponent.js', :name => 'Hypernova The Renderer') %>

JavaScript

Finally, lets set up MyComponent.js to be server-rendered. We will be using React to render.

const React = require('react');
const renderReact = require('hypernova-react').renderReact;

function MyComponent(props) {
  return <div>Hello, {props.name}!</div>;
}

module.exports = renderReact('MyComponent.js', MyComponent);

Visit the page and you should see your React component has been server-rendered. If you’d like to confirm, you can view the source of the page and look for data-hypernova-key. If you see a div filled with HTML then your component was server-rendered, if the div is empty then there was a problem and your component was client-rendered as a fall-back strategy.

If the div was empty, you can check stderr where you’re running the node service.

Debugging

The developer plugin for hypernova-ruby is useful for debugging issues with Hypernova and why it falls back to client-rendering. It’ll display a warning plus a stack trace on the page whenever a component fails to render server-side.

You can install the developer plugin in examples/simple/config/environments/development.rb

require 'hypernova'
require 'hypernova/plugins/development_mode_plugin'

Hypernova.add_plugin!(DevelopmentModePlugin.new)

You can also check the output of the server. The server outputs to stdout and stderr so if there is an error, check the process where you ran node hypernova.js and you should see the error.

Deploying

The recommended approach is running two separate servers, one that contains your server code and another that contains the Hypernova service. You’ll need to deploy the JavaScript code to the server that contains the Hypernova service as well.

Depending on how you have getComponent configured, you might need to restart your Hypernova service on every deploy. If getComponent caches any code then a restart is paramount so that Hypernova receives the new changes. Caching is recommended because it helps speed up the service.

FAQ

Isn’t sending an HTTP request slow?

There isn’t a lot of overhead or latency, especially if you keep the servers in close proximity to each other. It’s as fast as compiling many ERB templates and gives you the benefit of unifying your view code.

Why not an in-memory JS VM?

This is a valid option. If you’re looking for a siloed experience where the JS service is kept separate, then Hypernova is right for you. This approach also lends itself better to environments that don’t already have a JS VM available.

What if the server blows up?

If something bad happens while Hypernova is attempting to server-render your components it’ll default to failure mode where your page will be client-rendered instead. While this is a comfortable safety net, the goal is to server-render every request.

Pitfalls

These are pitfalls of server-rendering JavaScript code and are not specific to Hypernova.

• You’ll want to do any DOM-related manipulations in componentDidMount. componentDidMount runs on the browser but not the server, which means it’s safe to put DOM logic in there. Putting logic outside of the component, in the constructor, or in componentWillMount will cause the code to fail since the DOM isn’t present on the server.

• It is recommended that you run your code in a VM sandbox so that requests get a fresh new JavaScript environment. In the event that you decide not to use a VM, you should be aware that singleton patterns and globals run the risk of leaking memory and/or leaking data between requests. If you use createGetComponent you’ll get VM by default.

Clients

See clients.md

Browser

The included browser package is a barebones helper which renders markup on the server and then loads it on the browser.

List of compatible browser packages:

• hypernova-react
• hypernova-aphrodite
• hypernova-styled-components

Server

Starting up a Hypernova server

const hypernova = require('hypernova/server');

hypernova({
  getComponent: require,
});

Options, and their defaults

{
  // the limit at which body parser will throw
  bodyParser: {
    limit: 1024 * 1000,
  },
  // runs on a single process
  devMode: false,
  // how components will be retrieved,
  getComponent: undefined,
  // if not overridden, de