EasyPrintedStages

A set of 3D printed open sourced motion stages for scientific and laboratory work compatible with the gridfinity standard. The latest "stable" (version printed and tested) release can be found on the printables linked below. Please consider going there and like/download as it helps me out! There are two different compatible stages in this ecosystem, a linear and rotary stage. A Z stage, pitch stage, and motorised stages are currently under development. You may see those in this repo but they are "alpha" versions uploaded to the master branch for collaborators to test before we fully release them.

This readme is long but includes all the instructions you need to build and assemble the stages. IF PRINTING A LINEAR STAGE CHECK THE LEADSCREW PRINTING GUIDE FIRST FOR BEST RESULTS.

Content:

• Build Options for All Stages
• Linear Stage Specific Build Options
• Linear Stage Printing Instructions
• Linear Stage Assembly Instructions
• Rotary Stage Prtinting Instructions
• Rotary Stage Assembly Instructions

Build Options for All Stages:

The design is built to be as modular as possible and users are encouraged to download FreeCAD and export the model to 3mf files for printer directly from the CAD files instead of using those provided. Numerous mounting solutions are also provided for the stage.

Optional Gridfinity Standard Mounting Plate:

The FreeCAD design makes use of the Gridfinity Workbench within FreeCAD. Users can find instructions on how to install and use this workbench under its associated page Gridfinity Workbench. A 2x2 unit Gridfinity base plate is provided in the design that can be screwed into the base of the stage. Additionally a 4x4 unit bolt together mesh is provided to act as a starting point for mounting a Gridfinity based stage system. Mounting bolts for the Gridfinity base plate go through the magnet holes on the plate base. Note: If you make a custom base larger than 2x2u, you will need to quickly pocket the holes all the way through the plate. This has already been done on the provided 2x2u base.

Optional Top Plate

An optional top plate can be printed with the design. It mounts via 4 M3 bolts in the corners of the plate. The other 2 holes in the plate are for locking bolts, these holes go all the way through the top plate of the stage and allow a longer 25mm M3 bolt to be tightened down into the base of the stage, locking it in place. This can be used to lock the stage in a desired position.

The mounting plate features a grid of 2.6mm diameter holes, these are the perfect size for M3 bolts to thread into without the need for threaded inserts. The holes are spaced 5mm apart to make designing custom mounting hardware as easy as possible. Some hardware for this plate has been provided, namely the Easy Stage Clamp.

How to make a custom mounting plate:

Open the design in FreeCAD and activate the Mounting Plate Body. The final operation is the one that pockets all the mounting holes, simply deleting this operation or copying the body from the previous operation will yield a blank plate that can be modified however is

How to Mount Other Stages From The Ecosystem:

All of the Easy Printed Stages can be mounted to each other via the holes on their top. NOTE ON ROTARY STAGE Only two mounting bolts are accessible, these should be more than enough to hold it down but because of how the case halves are tightened down together a second pair of holes would never line up.

Linear Stage Specific Build Options:

##Rubber Band For Anti-Backlash You can loop a rubber band between the threaded nut and the two holes where the adjustor protrudes from the base to apply a constant force onto the lead screw. This is generally not needed if printed at higher tolerance but was included for users using older printers without input shaping.

Linear Stage Printing Instructions:

The design should be printed in 2 separate sets. These are documented here. PLEASE CHECK THE LEAD SCREW SETTINGS BELOW OR IT WILL FAIL TO PRINT!

Bulk, Low Tolerance Components

Parts in this set are:

• Base Plate with Integrated Gridfinity
• Shim
• Upper
• Adjuster Cap
• Base
• M3 5mm Spaced Mounting Plate
• 2u Gridfinity Base Plate

Recommended Materials for This Set:

• PETG --> Best overall and chemically resistant so good for use in the lab.
• PETG CF --> Much stronger than regular PETG but surface is rougher and parts can be less clean/may need sanding. Also more expensive.
• PLA --> Cheapest and easiest to print but not chemically resistant so use only in non-wet lab's.

You can also use pretty much anything else you want provided its mechanically hard but increasing the strength of these parts does little for the designs overall strength since the weakest point is the printed lead screw.

Print Settings and Other Info:

• You can get away with a 0.6 or 0.8mm nozzle on this set to improve print time but the fit/finish will be worse. 0.4mm is recommended. There is no need to use high detail slicer parameters.
• Enable support for the Base and Base Plate with Integrated Gridfinity parts, the overhand here needs it. Tree supports are recommended and if a threshold angle of 30 degrees is used in the slicer only this region of the design will be supported by Tree's. //this was tested in Bambu, Orca, and Prusa slicer.

3mf project files for this set have been made for Bambu Studio (specifically for the A1 Mini but can easily be adapted to their other printers) and Prusa slicer, they can be found within the GitHub for the project.

High Tolerance Threaded Parts

Parts in this set are:

• Adjuster
• Thread Block Modelled

Recommended Materials for This Set:

• PETG --> Best if you only have a low temperature printer.
• ASA --> Best if you have a high temperature printer but chemical resistance isn't a concern.
• PET --> Best for high temperature and chemical resistance but hard to print well.

Note on PLA: You can use it but it may not be strong enough nor is it chemically resistant.

Note on CF/GF reinforced filaments: They can be used here but there is a concern about their abrasive nature wearing down the threads over time.

Print Settings and Other Info:

• Use a 0.4 or 0.2mm nozzle.
• Use 100% infill.
• Use the highest detail setting on the slicer of your choice, less because of detail, more because it will slow the printer down making the long tall lead screw print easier.
• If you cannot use the provided 3mf for the Adjuster HAVE A LOOK AT IT FIRST BELOW. Custom painted on supports are used to stabilise the tall and wobbly part and make it print well. Open that model and see how I've done it before trying to print it yourself. I used the paint on custom support tool in the slicer with the tree supports. Make sure not to paint them onto the threads or it will ruin the threads, paint them on just after the threads finish at the top of the adjuster.

Linear Stage Assembly Instructions:

Important Note:

Use silicone grease on the way and lead screw to make the stage move easier and last longer.

Step 1: Thread the Adjuster

Apply a small amount of Silicone Grease to the adjuster tip and to the holes made for it in the base of the stage, thread the adjuster through the block and then apply the end cap with an M3x5mm bolt. At this stage you should also apply Silicone Grease to the ways of the stage. You're assembly should look like the one seen below: Note: The direction of the little triangle on the top of the thread block doesn't matter, its for a different project that re-uses these parts.

Step 2: Mount Upper

Insert the longer M3 bolts into the side of the upper but leave some space, you only want about 2mm of the bolt to protrude into the way, as seen below: Slide the upper over the lower assembly from STEP 1, you dont need to put the shim in yet. You'll feel the top seat itself down onto the threaded block with a click, once you feel this you can tighten the two M3 bolts on the top. Note: There is a vernier gauge modelled on the side of the base and the top piece, make sure you have the top piece the right way round if you plan on using these. The top is ambidextrous so if you get this wrong the stage will still work. You can now slide the shim in, make sure the holes on the side of the shim face the bolts you partially inserted earlier. Slide the shim all the way in and then start to tighten the bolts on the side.

Important: Tighten each bolt a little at a time alternating between them. After each bolt check to s