XiaoxiangBMSPiDisplay

Step 1 : Install Raspberry Pi OS Lite (32-Bit)

Step 2 : configuring the rPi

On the SD card

• add an empty ssh file on boot
• add a wpa_supplicant.conf file :

 country=US # Your 2-digit country code
 ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
 network={
     ssid="YOUR_NETWORK_NAME"
     psk="YOUR_PASSWORD"
     key_mgmt=WPA-PSK
 }

Then run the pi

• connect to ssh
• change pi user password with passwd command
• copy content from github on the pi
• navigate to the folder
• run sudo raspi-config
  • enable i2c in "Interface Options"
  • enable auto login in "System Options"
• run sudo bash install.sh
• take a coffee
• add the line to /etc/profil by sudo nano /etc/profile : sudo bash /home/pi/$$Folder$$/run.sh