ESPythoNOW

Linux/Python ESP-NOW library.

• Send and receive ESP-NOW messages to and from a Linux machine and ESP8266/ESP32 devices

• Monitor all ESP-NOW messages

• Stream high quality audio to ESP device

• Supports ESP-NOW v1.0 and v2.0

  • ESP-NOW on ESP32 supports messages up to 1,470 bytes.
  • ESPythoNOW supports messages up to 2,089 bytes!

• Supports sending and receiving encrypted ESP-NOW messages!

• MQTT Subscribe and publish, send and receive ESP-NOW

• This is a work in progress

---

Prep the interface and set channel (depreciated)

sudo bash prep.sh wlan1 8

---

Try it out, listen for known message types and other ESP-NOW traffic

python3 ESPythoNOW.py wlan1

---

Send and Recieve ESP-NOW messages

from ESPythoNOW import *
import time

def callback(from_mac, to_mac, msg):
  print("ESP-NOW message from %s to %s: %s" % (from_mac, to_mac, msg))

espnow = ESPythoNow(interface="wlan1", callback=callback)
espnow.start()

while True:
  msg=b'\x01'
  espnow.send("FF:FF:FF:FF:FF:FF", msg)
  time.sleep(3)

---

Monitor/Sniff all ESP-NOW Traffic

from ESPythoNOW import *

def callback(from_mac, to_mac, msg):
  print("ESP-NOW message from %s to %s: %s" % (from_mac, to_mac, msg))

espnow = ESPythoNow(interface="wlan1", accept_all=True, callback=callback)
espnow.start()
input() # Run until enter is pressed

---

Receive/Send encrypted ESP-NOW messages

espnow = ESPythoNow(interface="wlan1", callback=callback, pmk="0u4hgz7pgct3gnv8", lmk="a3o4csuv2bpvr0wu")

---

MQTT. Work in progress

python3 ESPythoNOW.py --interface=wlan1 --mqtt_host=192.168.0.10 --mqtt_port=1883 --mqtt_username=test_user --mqtt_password=test_password --mqtt_keepalive=60 --mqtt_raw=false --mqtt_hex=True --mqtt_json=true

---

Assorted Details

• espnow = ESPythoNow() - Initialize ESPythoNOW

  • Arguments
    • interface - The only required argument, the wireless interface to use. Must support monitor mode.
    • mac - The MAC address to use. Defaults to interface's MAC.
    • callback - Function will execute in thread on ESP-NOW message receive.
    • accept_broadcast - Accept/Reject ESP-NOW BROADCAST messages. Defaults to True.
    • accept_all - Accept/Reject ESP-NOW messages no matter the destination MAC. Defaults to False.
    • accept_ack - If enabled, will execute the callback function when remote peer confirms delivery of sent message. Defaults to False.
    • block_on_send - If enabled, will block on send() until remote peer confirms delivery or timeout. Defaults to False
  • Returns
    • ESPythoNow object.

• espnow.start() - Begin listening for ESP-NOW messages

  • Returns
    • True/False on listener starting

• espnow.send() - Send ESP-NOW messages to remote peer

  • Arguments
    • mac - The MAC address of remote ESP-NOW peer.
    • msg - The message contents.
      • Also supports list of messages
    • block - If enabled, will block until remote peer confirms delivery or timeout. Overrides global block_on_send. Defaults to block_on_send.
  • Returns
    • If not blocking, will always return True.
    • If blocking, will return True if message(s) have delivery confirmed by remote peer.

---

Message Signatures/Decoders / callback data types

# Get Wizmote data as a dict

def wizmote_callback(from_mac, to_mac, data):
  print(from_mac, to_mac, "Wizmote callback handler", data)

espnow = ESPythoNow(interface="wlan1", accept_all=True)
espnow.add_signature(known_profiles["wizmote"], wizmote_callback, data="dict", dedupe=True)
#espnow.add_signature(known_profiles["wizmote"], wizmote_callback, data="json", dedupe=True) # or as json
#espnow.add_signature(known_profiles["wizmote"], wizmote_callback, data="raw", dedupe=False) # or raw bytes
#espnow.add_signature(known_profiles["wizmote"], wizmote_callback, data="hex", dedupe=False) # or hex

espnow.start()

# Get Wiz PIR motion sensor data
# Provide a custom profile that can detect/fingerprint ESP-NOW messsages as well as decode them
custom_profile = {
  "wiz_motion":{
    "name": "wiz motion sensor",
    "struct": "<BIBBBBBBBB4s",
    "vars": ["type", "sequence", "dt1", "_0", "_1", "_2", "motion", "_3", "_4", "_5", "ccm"],
    "dict": {"motion": {0x0b: True, 0x19: True, 0x0a: False, 0x18: False}}, # 0x0b RT Motion | 0x19 LT Motion | 0x0a RT Clear | 0x18 LT Clear
    "signature": {"length": 17, "bytes": {0: 0x81, 5: 0x42}}}}

def wiz_motion_callback(from_mac, to_mac, data):
  print(from_mac, to_mac, "Wiz Motion callback handler", data)

espnow = ESPythoNow(interface="wlan1", accept_all=True)
espnow.add_signature(custom_profile["wiz_motion"], wiz_motion_callback, data="dict", dedupe=True)
espnow.start()

---

How to install with pip and use with sudo (not recommended)

sudo pip install git+https://github.com/ChuckMash/ESPythoNOW.git@main
sudo espythonow -i wlan1

---

How to install with venv and setcap

# Create virtual environment
python3 -m venv --copies venv

# Add capabilities so can be run without root
sudo setcap cap_net_raw,cap_net_admin=eip venv/bin/python3

# Activate it
source venv/bin/activate

# Upgrade pip
pip3 install --upgrade pip

# Now install from GitHub
pip3 install git+https://github.com/ChuckMash/ESPythoNOW.git@main

# Use ONE of the following methods to set monitor mode and channel
sudo ifconfig wlan1 down
sudo iwconfig wlan1 mode monitor
sudo ifconfig wlan1 up
sudo iwconfig wlan1 channel 8

#sudo iw dev wlan1 set type monitor
#sudo ip link set wlan1 up
#sudo iw dev wlan1 set channel 8


espythonow -i wlan1

---

How to use with Docker Container

# Download the docker files from GitHub
wget -O Dockerfile "https://raw.githubusercontent.com/ChuckMash/ESPythoNOW/refs/heads/main/addon-espythonow/Dockerfile"
wget -O docker-compose.yml "https://raw.githubusercontent.com/ChuckMash/ESPythoNOW/refs/heads/main/docker-compose.yml"

# Edit docker-compose.yml to customize interface, send/receive settings, MQTT information, etc.

# Build the Docker images from the Dockerfile
docker-compose build #--no-cache

# Start containers in detached mode (background)
docker-compose up -d

# Follow the logs from the espythonow container
docker-compose logs -f espythonow

---

How to Install as Home Assistant Addon/App

• Select Setttings, Apps, Install App
• Select the 3 dot menu in the upper right corner and select Repositories
• Add https://github.com/ChuckMash/ESPythoNOW
• Wait a moment and refresh the page
• Install ESPythoNOW - ESP-NOW to MQTT Bridge

---

---

NOTE about current state, subject to change or improvements

• Interface must support monitor mode
• Any "local" MAC address is supported
  • Only actual local hardware MAC will provide delivery confirmation
• This is a work in progress