SkillAgentSearch skills...

unity-cinemachine

Set up Cinemachine Virtual Cameras

Install / Use

npx skills add Besty0728/Unity-Skills --skill cinemachine

Installs into whichever agent you are using.

About this skill
📄

SKILL.md

Installable skill definition

Quality Score

84/100

Supported Platforms

Universal

Tags

Our assessment of unity-cinemachine

unity-cinemachine scores 84/100 on our quality scale, 2890th of 4,700 Development & Engineering skills we index.

Its SKILL.md is 21 KB long, well organised into 41 sections with 1 code example: a thorough specification that gives an agent plenty to work with.

With 1,781 GitHub stars, it is one of the more widely adopted skills in the catalogue.

Substance
30/30
Structure
17/20
Description
8/15
Adoption
14/20
Freshness
15/15

Maintenance, license and trust

  • The repository was last updated about 2 months ago, so unity-cinemachine is actively maintained.
  • Our last check on 2026-11-05 found the source still online.
  • It is released under the MIT license, a permissive license that allows use, modification and commercial use with attribution.
  • Its trust signals score 100/100, with no cautions. These come from repository metadata, not a code audit — read the skill file before letting an agent act on it.

Safety scan

No issues found

Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands. An AI review of the same text found nothing harmful.

AI review by kimi-k2.7-code on 2026-10-01. Automated pattern scan on 2026-10-01. It catches known dangerous patterns, not every risk — read a skill before letting an agent act on it.

unity-cinemachine compared with similar skills

All 4 of these similar skills score higher than unity-cinemachine; compare them before choosing.

SkillScoreStarsUpdatedFormat
unity-cinemachine (this skill)by Besty0728841.8k53d agoSKILL.md
taste-skillby Leonxlnx100116.8k8d agoCLAUDE.md
ai-job-searchby ai-job-search-dev10072.1ktodayCLAUDE.md
claude-howtoby luongnv8910047.3k2d agoCLAUDE.md
lobehubby lobehub10085.6ktodayMCP Server

Frequently asked questions

How do I install unity-cinemachine?
Run npx skills add Besty0728/Unity-Skills --skill unity-cinemachine. The install tabs above show the steps for each supported agent.
Which AI agents does unity-cinemachine work with?
It is written for Universal, as a SKILL.md file. Other agents that read the same format can often use it too.
Is unity-cinemachine safe to use?
Our scan of the whole file found no instruction hijacking, hidden characters, credential access, data exfiltration or destructive commands. An AI review of the same text found nothing harmful. It is MIT-licensed and scores 100/100 on trust signals. Skills are instructions an agent will follow, so read the file before installing it and do not approve commands you do not understand.
Is unity-cinemachine still maintained?
The repository was last updated about 2 months ago, so unity-cinemachine is actively maintained.

name: unity-cinemachine description: Set up Cinemachine Virtual Cameras

Before calling any skill in this module: if you are about to call a skill with parameters guessed from its name or description, STOP — read this file (or fetch its schema via GET /skills/recommend?includeSchema=true) first. If you already have the parameter definitions from recommend/schema, you may proceed straight to dryRun.

Triggers

  • Creating or tuning Cinemachine cameras
  • Configuring follow/look-at/noise
  • Building cinematic camera behavior
  • 创建或调校 Cinemachine 相机、设置跟随/注视/噪声、构建运镜效果

Cinemachine Skills

Control Cinemachine Virtual Cameras and brain settings. Works with Cinemachine 2.x and 3.x through a runtime reflection adapter (CinemachineAdapter / CinemachineSkills).

Operating Mode

  • Approval:查询类 skill(cinemachine_inspect_vcam / cinemachine_list_components / cinemachine_get_brain_info,源码标 SkillMode.SemiAuto)直接执行;其余配置/创建类(cinemachine_create_vcam / cinemachine_set_targets / cinemachine_set_lens / cinemachine_configure_body / cinemachine_configure_aim 等,标 SkillMode.FullAuto)需用户 grant,grant 后服务端一步执行返结果。
  • Auto / Bypass:未被禁列表拦截的 skill 直接执行。
  • 本模块含 Delete 类 skill:cinemachine_set_component(替换/移除 pipeline component)、cinemachine_target_group_remove_member、cinemachine_remove_extension 标记为 SkillOperation.Delete,被 IsForbiddenInSemi 静态拦截 —— 仅 Bypass 模式或加入 Allowlist 才能调用。
  • 包依赖:必须安装 com.unity.cinemachine 包(CM 2.x 或 3.x)。未安装时所有 skill 返回 { error = "Cinemachine is not installed. Install Cinemachine 2.x or 3.x via Package Manager." } 的 stub —— 调用方应先用 package_* 系列 skill 确认安装状态。
  • 反射脆弱性:CM2 ↔ CM3 之间 API 名变化大(CinemachineVirtualCamera → CinemachineCamera,CinemachineComponentBase 改名等)。本模块通过 CinemachineAdapter 反射桥接,遇 CM 早期预览版(< 3.0.0-pre.5)可能因 API 漂移返回失败 —— 优先用 cinemachine_inspect_vcam 探测当前可用字段,再决定 propertyName。

DO NOT (common hallucinations):

  • cinemachine_create does not exist → use cinemachine_create_vcam for virtual cameras
  • cinemachine_set_target / cinemachine_set_follow / cinemachine_set_lookat do not exist → use cinemachine_set_targets (sets both Follow and LookAt in one call)
  • cinemachine_add_brain does not exist → CinemachineBrain is auto-added to Main Camera on first VCam creation
  • Cinemachine 2.x uses CinemachineVirtualCamera; Cinemachine 3.x uses CinemachineCamera — skills handle this automatically

Additional compatibility notes:

  • CM3 priority access should use Priority.Value as the lowest common API when writing compatibility code.
  • Early CM3 previews before 3.0.0-pre.5 changed core camera APIs significantly and are outside the current support baseline.

Routing:

  • For basic Game Camera operations → use camera module
  • For Scene View camera → use camera module's camera_set_transform/camera_look_at
  • For camera animation sequences → use timeline module with Cinemachine track

Skills

cinemachine_create_vcam

Create a new Virtual Camera. Parameters:

  • name (string): Name of the VCam GameObject.
  • folder (string): Parent folder path (default: "Assets/Settings").

cinemachine_inspect_vcam

Deeply inspect a VCam, returning fields and tooltips. Parameters:

  • vcamName (string, optional): Name of the VCam GameObject.
  • instanceId (int, optional): VCam instance ID.
  • path (string, optional): VCam hierarchy path.

cinemachine_set_vcam_property

Set any property on VCam or its pipeline components. Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • componentType (string): "Main" (VCam itself), "Lens", or Component name (e.g. "OrbitalFollow").
  • propertyName (string): Field or property name.
  • value (object): New value.
  • fov (float, optional): Lens FOV shortcut. When supplied without propertyName, routes to cinemachine_set_lens.
  • nearClip (float, optional): Lens near clip shortcut.
  • farClip (float, optional): Lens far clip shortcut.
  • orthoSize (float, optional): Lens orthographic size shortcut.

cinemachine_set_targets

Set Follow and LookAt targets. Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID (preferred for precision).
  • path (string, optional): VCam hierarchy path.
  • followName (string, optional): GameObject name to follow.
  • lookAtName (string, optional): GameObject name to look at.

cinemachine_set_component

Switch VCam pipeline component (Body/Aim/Noise). Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • stage (string): "Body", "Aim", or "Noise".
  • componentType (string): Type name (e.g. "OrbitalFollow", "Composer") or "None" to remove.

cinemachine_add_component

DEPRECATED — Use cinemachine_set_component instead for proper pipeline control (Body/Aim/Noise stages). Add a Cinemachine component (legacy, supports CM2 and CM3). Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • componentType (string): Type name (e.g., "OrbitalFollow").

cinemachine_set_lens

Quickly configure Lens settings (FOV, Near, Far, OrthoSize) and the projection ModeOverride. Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • fov (float, optional): Field of View.
  • nearClip (float, optional): Near Clip Plane.
  • farClip (float, optional): Far Clip Plane.
  • orthoSize (float, optional): Orthographic Size.
  • mode (string, optional): Writes the lens ModeOverride, i.e. the projection mode this VCam pushes to the Unity Camera when it goes live. Case-insensitive; valid values are None (leave the Camera's own projection alone), Orthographic, Perspective and Physical. Omitting it leaves the existing ModeOverride untouched.

At least one of fov / nearClip / farClip / orthoSize / mode must be supplied; passing none returns No values provided to update. An invalid mode rejects the whole call with SEMANTIC_INVALID + validValues before anything is written, so the other parameters are not applied either.

cinemachine_list_components

List all available Cinemachine component names. Parameters:

  • None.

cinemachine_impulse_generate

Trigger an Impulse at location or via Source. Parameters:

  • sourceParams (string, optional): JSON string for parameters, e.g., {"velocity": {"x": 0, "y": -1, "z": 0}}.

cinemachine_get_brain_info

Get info about the Active Camera and Blend. Parameters:

  • None.

cinemachine_create_target_group

Create a CinemachineTargetGroup. Parameters:

  • name (string): Name of the new TargetGroup GameObject.

cinemachine_target_group_add_member

Add or update a member in a TargetGroup. Parameters:

  • groupName (string): Name of the TargetGroup.
  • groupInstanceId (int, optional): TargetGroup instance ID.
  • groupPath (string, optional): TargetGroup hierarchy path.
  • targetName (string): Name of the member GameObject.
  • targetInstanceId (int, optional): Member GameObject instance ID.
  • targetPath (string, optional): Member GameObject hierarchy path.
  • weight (float): Member weight (default 1).
  • radius (float): Member radius (default 1).

cinemachine_target_group_remove_member

Remove a member from a TargetGroup. Parameters:

  • groupName (string): Name of the TargetGroup.
  • groupInstanceId (int, optional): TargetGroup instance ID.
  • groupPath (string, optional): TargetGroup hierarchy path.
  • targetName (string): Name of the member GameObject.
  • targetInstanceId (int, optional): Member GameObject instance ID.
  • targetPath (string, optional): Member GameObject hierarchy path.

cinemachine_set_spline

Assign a SplineContainer to a VCam's SplineDolly component (Body stage). Parameters:

  • vcamName (string): Name of the VCam.
  • vcamInstanceId (int, optional): VCam instance ID.
  • vcamPath (string, optional): VCam hierarchy path.
  • splineName (string): Name of the GameObject with SplineContainer.
  • splineInstanceId (int, optional): SplineContainer GameObject instance ID.
  • splinePath (string, optional): SplineContainer GameObject hierarchy path.

cinemachine_add_extension

Add a CinemachineExtension to a VCam. Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • extensionName (string): Type name of the extension (e.g., "CinemachineStoryboard", "CinemachineImpulseListener").

cinemachine_remove_extension

Remove a CinemachineExtension from a VCam. Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • extensionName (string): Type name of the extension.

cinemachine_set_active

Force activation of a VCam (SOLO) by setting highest priority. Parameters:

  • vcamName (string): Name of the VCam to activate.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.

cinemachine_create_mixing_camera

Create a Cinemachine Mixing Camera. Parameters:

  • name (string): Name of the new GameObject.

cinemachine_mixing_camera_set_weight

Set the weight of a child camera within a Mixing Camera. Parameters:

  • mixerName (string, optional): Name of the Mixing Camera.
  • mixerInstanceId (int, optional): Mixing Camera instance ID.
  • mixerPath (string, optional): Mixing Camera hierarchy path.
  • mixerEntityId (string, optional): Mixing Camera entity ID (Unity 6000.4+, preferred).
  • childName (string, optional): Name of the child VCam.
  • childInstanceId (int, optional): Child VCam instance ID.
  • childPath (string, optional): Child VCam hierarchy path.
  • childEntityId (string, optional): Child VCam entity ID (Unity 6000.4+, preferred).
  • weight (float): Weight value, usually 0.0–1.0 (default 1).

cinemachine_create_clear_shot

Create a Cinemachine Clear Shot Camera. Parameters:

  • name (string): Name of the new GameObject.

cinemachine_create_state_driven_camera

Create a Cinemachine State Driven Camera. Parameters:

  • name (string): Name of the new GameObject.
  • targetAnimatorName (string, optional): Name of the GameObject with the Animator to bind.

cinemachine_state_driven_camera_add_instruction

Add a state mapping instruction to a State Driven Camera. Parameters:

  • cameraName (string, optional): Name of the State Driven Camera.
  • cameraInstanceId (int, optional): State Driven Camera instance ID.
  • cameraPath (string, optional): State Driven Camera hierarchy path.
  • cameraEntityId (string, optional): State Driven Camera entity ID (Unity 6000.4+, preferred).
  • stateName (string): Name of the animation state (e.g., "Run").
  • childCameraName (string, optional): Name of the child VCam to activate for this state.
  • childInstanceId (int, optional): Child VCam instance ID.
  • childPath (string, optional): Child VCam hierarchy path.
  • childEntityId (string, optional): Child VCam entity ID (Unity 6000.4+, preferred).
  • minDuration (float, optional): Minimum duration in seconds (default 0).
  • activateAfter (float, optional): Delay in seconds before activation (default 0).

cinemachine_set_noise

Configure Noise settings (Basic Multi Channel Perlin). Parameters:

  • vcamName (string): Name of the VCam.
  • instanceId (int, optional): VCam Instance ID.
  • path (string, optional): VCam hierarchy path.
  • amplitudeGain (float): Noise Amplitude.
  • frequencyGain (float): Noise Frequency.

cinemachine_set_priority

Set explicit priori

Truncated for display — read the full file on GitHub.

Related Skills

View on GitHub
GitHub Stars1.8k
CategoryDevelopment
Updated1mo ago
Forks165

Languages

C#

Trust signals

100/100

From repository metadata: license, adoption, age and documentation. Not a code audit — see the Safety scan above for what the skill file itself contains.

No cautions