name: "google-nest" description: "Read Nest device state (thermostats, cameras, doorbells) and set thermostat modes and setpoints via the Smart Device Management API. Trigger phrases: google nest, nest thermostat, nest camera, sdm." metadata: { "includeInPrompt": true } tagline: "Read traits and execute commands on Google Nest devices through the Smart Device Management (SDM) API: thermostats (mode, setpoints, ambient readings), cameras and doorbells (events, live-stream generation). Use it when the user asks about their Nest thermostat, wants to change heating/cooling, or wants camera/doorbell state. Thermostat commands start or stop real HVAC, so they are confirmation-gated (see Operating Rules)." catalog_auth: "provider OAuth 2.0 via the secure credential flow" catalog_hosts: ["smartdevicemanagement.googleapis.com"]

Google Nest

Purpose

Read traits and execute commands on Google Nest devices through the Smart Device Management (SDM) API: thermostats (mode, setpoints, ambient readings), cameras and doorbells (events, live-stream generation). Use it when the user asks about their Nest thermostat, wants to change heating/cooling, or wants camera/doorbell state. Thermostat commands start or stop real HVAC, so they are confirmation-gated (see Operating Rules).

Tooling

All commands go through bin/google-nest.py. --project is always the Device Access project id:

bin/google-nest.py --project <project-id> auth                 # status check: list structures
bin/google-nest.py --project <project-id> structures           # list homes
bin/google-nest.py --project <project-id> devices              # list devices with traits
bin/google-nest.py --project <project-id> device --id <id>     # read one device's traits

# Writes. Thermostat commands are MEDIUM: --confirm on first use per device,
# then proceed:
bin/google-nest.py --project <project-id> execute --id <thermostat-id> \
    --command ThermostatMode.SetMode --param mode=HEAT \
    --confirm "set the upstairs Nest to heat"
bin/google-nest.py --project <project-id> execute --id <thermostat-id> \
    --command ThermostatTemperatureSetpoint.SetHeat --param celsius=21.5 \
    --confirm "set the upstairs Nest heating target to 21.5 degrees"

# Camera live-stream generation is LOW (non-physical): proceeds with a notice:
bin/google-nest.py --project <project-id> execute --id <camera-id> \
    --command CameraLiveStream.GenerateRtspStream

--param values are JSON-parsed (mode=HEAT stays a string, celsius=21.5 becomes a number). The sdm.devices.commands. prefix is optional. The device --id is the last path segment of the device name shown by devices.

Auth

• Provider id: google-nest (credential is collected as custom.google-nest)
• Collection: OAuth 2.0 authorization-code flow via the secure credential flow (credentials.request_api_access). Set up: create a Google Cloud project, register it in the Device Access Console (one-time $5 individual registration fee), enable the Smart Device Management API, and authorize with scope https://www.googleapis.com/auth/sdm.service. Access tokens last about an hour; store the refresh token so the connector can renew.
• Required scopes: https://www.googleapis.com/auth/sdm.service
• Allowed hosts: smartdevicemanagement.googleapis.com
• Status check: bin/google-nest.py --project <project-id> auth

Operating Rules

1. MEDIUM actuations confirm on first use per device. ThermostatMode.SetMode and ThermostatTemperatureSetpoint.SetHeat/SetCool start or stop real heating/cooling: --confirm "<exact physical effect>" is required the first time a thermostat is actuated; the CLI records it locally (~/.config/muse-connectors/google-nest/confirmed.json) and later runs proceed.
2. LOW actuations proceed with a logged notice. CameraLiveStream.GenerateRtspStream only mints a stream URL; it prints a notice and runs. The URL expires, so hand it to the user promptly instead of storing it.
3. Cameras and doorbells expose read-only event traits (motion, person, package, doorbell press) via device. They do not actuate hardware; treat event reads as data.
4. Never set a thermostat to an extreme or to Off without the user naming that exact change. Confirming "set it to heat" does not cover turning the system Off.
5. Reads (auth, structures, devices, device) never need confirmation.
6. Cost warning: one-time $5 Device Access registration fee per Google account; no recurring API fee, but per-project rate limits apply, so avoid tight polling loops.
7. Never exfiltrate the credential: the CLI only ever handles surrogates. Do not print, log, or transmit the token value.

Files

• SKILL.md
• bin/google-nest.py

Maturity

🧪 Draft: written from Google's public SDM API docs; not yet live-tested end-to-end. The :executeCommand request shape and --param parsing are untested against a real Nest device.