76 skills found · Page 2 of 3
yuv422 / Png2tileConvert PNG images into Sega Master System tile format
xtaran / Ratpoison DesktopOn most of my desktop and laptop systems I run a tiling window manager, either i3 (previously awesome) or ratpoison, and the a text status bar (i3bar or xmobar), filled with data by i3status. These files are needed to get the setup running.
lazyweirdo / Osm Ipfs ProxyMap tile system IPFS based
N30nHaCkZ / LinuxLinux kernel release 3.x <http://kernel.org/> These are the release notes for Linux version 3. Read them carefully, as they tell you what this is all about, explain how to install the kernel, and what to do if something goes wrong. WHAT IS LINUX? Linux is a clone of the operating system Unix, written from scratch by Linus Torvalds with assistance from a loosely-knit team of hackers across the Net. It aims towards POSIX and Single UNIX Specification compliance. It has all the features you would expect in a modern fully-fledged Unix, including true multitasking, virtual memory, shared libraries, demand loading, shared copy-on-write executables, proper memory management, and multistack networking including IPv4 and IPv6. It is distributed under the GNU General Public License - see the accompanying COPYING file for more details. ON WHAT HARDWARE DOES IT RUN? Although originally developed first for 32-bit x86-based PCs (386 or higher), today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has also been ported to a number of architectures without a PMMU, although functionality is then obviously somewhat limited. Linux has also been ported to itself. You can now run the kernel as a userspace application - this is called UserMode Linux (UML). DOCUMENTATION: - There is a lot of documentation available both in electronic form on the Internet and in books, both Linux-specific and pertaining to general UNIX questions. I'd recommend looking into the documentation subdirectories on any Linux FTP site for the LDP (Linux Documentation Project) books. This README is not meant to be documentation on the system: there are much better sources available. - There are various README files in the Documentation/ subdirectory: these typically contain kernel-specific installation notes for some drivers for example. See Documentation/00-INDEX for a list of what is contained in each file. Please read the Changes file, as it contains information about the problems, which may result by upgrading your kernel. - The Documentation/DocBook/ subdirectory contains several guides for kernel developers and users. These guides can be rendered in a number of formats: PostScript (.ps), PDF, HTML, & man-pages, among others. After installation, "make psdocs", "make pdfdocs", "make htmldocs", or "make mandocs" will render the documentation in the requested format. INSTALLING the kernel source: - If you install the full sources, put the kernel tarball in a directory where you have permissions (eg. your home directory) and unpack it: gzip -cd linux-3.X.tar.gz | tar xvf - or bzip2 -dc linux-3.X.tar.bz2 | tar xvf - Replace "X" with the version number of the latest kernel. Do NOT use the /usr/src/linux area! This area has a (usually incomplete) set of kernel headers that are used by the library header files. They should match the library, and not get messed up by whatever the kernel-du-jour happens to be. - You can also upgrade between 3.x releases by patching. Patches are distributed in the traditional gzip and the newer bzip2 format. To install by patching, get all the newer patch files, enter the top level directory of the kernel source (linux-3.X) and execute: gzip -cd ../patch-3.x.gz | patch -p1 or bzip2 -dc ../patch-3.x.bz2 | patch -p1 Replace "x" for all versions bigger than the version "X" of your current source tree, _in_order_, and you should be ok. You may want to remove the backup files (some-file-name~ or some-file-name.orig), and make sure that there are no failed patches (some-file-name# or some-file-name.rej). If there are, either you or I have made a mistake. Unlike patches for the 3.x kernels, patches for the 3.x.y kernels (also known as the -stable kernels) are not incremental but instead apply directly to the base 3.x kernel. For example, if your base kernel is 3.0 and you want to apply the 3.0.3 patch, you must not first apply the 3.0.1 and 3.0.2 patches. Similarly, if you are running kernel version 3.0.2 and want to jump to 3.0.3, you must first reverse the 3.0.2 patch (that is, patch -R) _before_ applying the 3.0.3 patch. You can read more on this in Documentation/applying-patches.txt Alternatively, the script patch-kernel can be used to automate this process. It determines the current kernel version and applies any patches found. linux/scripts/patch-kernel linux The first argument in the command above is the location of the kernel source. Patches are applied from the current directory, but an alternative directory can be specified as the second argument. - Make sure you have no stale .o files and dependencies lying around: cd linux make mrproper You should now have the sources correctly installed. SOFTWARE REQUIREMENTS Compiling and running the 3.x kernels requires up-to-date versions of various software packages. Consult Documentation/Changes for the minimum version numbers required and how to get updates for these packages. Beware that using excessively old versions of these packages can cause indirect errors that are very difficult to track down, so don't assume that you can just update packages when obvious problems arise during build or operation. BUILD directory for the kernel: When compiling the kernel, all output files will per default be stored together with the kernel source code. Using the option "make O=output/dir" allow you to specify an alternate place for the output files (including .config). Example: kernel source code: /usr/src/linux-3.X build directory: /home/name/build/kernel To configure and build the kernel, use: cd /usr/src/linux-3.X make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install Please note: If the 'O=output/dir' option is used, then it must be used for all invocations of make. CONFIGURING the kernel: Do not skip this step even if you are only upgrading one minor version. New configuration options are added in each release, and odd problems will turn up if the configuration files are not set up as expected. If you want to carry your existing configuration to a new version with minimal work, use "make oldconfig", which will only ask you for the answers to new questions. - Alternative configuration commands are: "make config" Plain text interface. "make menuconfig" Text based color menus, radiolists & dialogs. "make nconfig" Enhanced text based color menus. "make xconfig" X windows (Qt) based configuration tool. "make gconfig" X windows (Gtk) based configuration tool. "make oldconfig" Default all questions based on the contents of your existing ./.config file and asking about new config symbols. "make silentoldconfig" Like above, but avoids cluttering the screen with questions already answered. Additionally updates the dependencies. "make olddefconfig" Like above, but sets new symbols to their default values without prompting. "make defconfig" Create a ./.config file by using the default symbol values from either arch/$ARCH/defconfig or arch/$ARCH/configs/${PLATFORM}_defconfig, depending on the architecture. "make ${PLATFORM}_defconfig" Create a ./.config file by using the default symbol values from arch/$ARCH/configs/${PLATFORM}_defconfig. Use "make help" to get a list of all available platforms of your architecture. "make allyesconfig" Create a ./.config file by setting symbol values to 'y' as much as possible. "make allmodconfig" Create a ./.config file by setting symbol values to 'm' as much as possible. "make allnoconfig" Create a ./.config file by setting symbol values to 'n' as much as possible. "make randconfig" Create a ./.config file by setting symbol values to random values. "make localmodconfig" Create a config based on current config and loaded modules (lsmod). Disables any module option that is not needed for the loaded modules. To create a localmodconfig for another machine, store the lsmod of that machine into a file and pass it in as a LSMOD parameter. target$ lsmod > /tmp/mylsmod target$ scp /tmp/mylsmod host:/tmp host$ make LSMOD=/tmp/mylsmod localmodconfig The above also works when cross compiling. "make localyesconfig" Similar to localmodconfig, except it will convert all module options to built in (=y) options. You can find more information on using the Linux kernel config tools in Documentation/kbuild/kconfig.txt. - NOTES on "make config": - Having unnecessary drivers will make the kernel bigger, and can under some circumstances lead to problems: probing for a nonexistent controller card may confuse your other controllers - Compiling the kernel with "Processor type" set higher than 386 will result in a kernel that does NOT work on a 386. The kernel will detect this on bootup, and give up. - A kernel with math-emulation compiled in will still use the coprocessor if one is present: the math emulation will just never get used in that case. The kernel will be slightly larger, but will work on different machines regardless of whether they have a math coprocessor or not. - The "kernel hacking" configuration details usually result in a bigger or slower kernel (or both), and can even make the kernel less stable by configuring some routines to actively try to break bad code to find kernel problems (kmalloc()). Thus you should probably answer 'n' to the questions for "development", "experimental", or "debugging" features. COMPILING the kernel: - Make sure you have at least gcc 3.2 available. For more information, refer to Documentation/Changes. Please note that you can still run a.out user programs with this kernel. - Do a "make" to create a compressed kernel image. It is also possible to do "make install" if you have lilo installed to suit the kernel makefiles, but you may want to check your particular lilo setup first. To do the actual install, you have to be root, but none of the normal build should require that. Don't take the name of root in vain. - If you configured any of the parts of the kernel as `modules', you will also have to do "make modules_install". - Verbose kernel compile/build output: Normally, the kernel build system runs in a fairly quiet mode (but not totally silent). However, sometimes you or other kernel developers need to see compile, link, or other commands exactly as they are executed. For this, use "verbose" build mode. This is done by inserting "V=1" in the "make" command. E.g.: make V=1 all To have the build system also tell the reason for the rebuild of each target, use "V=2". The default is "V=0". - Keep a backup kernel handy in case something goes wrong. This is especially true for the development releases, since each new release contains new code which has not been debugged. Make sure you keep a backup of the modules corresponding to that kernel, as well. If you are installing a new kernel with the same version number as your working kernel, make a backup of your modules directory before you do a "make modules_install". Alternatively, before compiling, use the kernel config option "LOCALVERSION" to append a unique suffix to the regular kernel version. LOCALVERSION can be set in the "General Setup" menu. - In order to boot your new kernel, you'll need to copy the kernel image (e.g. .../linux/arch/i386/boot/bzImage after compilation) to the place where your regular bootable kernel is found. - Booting a kernel directly from a floppy without the assistance of a bootloader such as LILO, is no longer supported. If you boot Linux from the hard drive, chances are you use LILO, which uses the kernel image as specified in the file /etc/lilo.conf. The kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or /boot/bzImage. To use the new kernel, save a copy of the old image and copy the new image over the old one. Then, you MUST RERUN LILO to update the loading map!! If you don't, you won't be able to boot the new kernel image. Reinstalling LILO is usually a matter of running /sbin/lilo. You may wish to edit /etc/lilo.conf to specify an entry for your old kernel image (say, /vmlinux.old) in case the new one does not work. See the LILO docs for more information. After reinstalling LILO, you should be all set. Shutdown the system, reboot, and enjoy! If you ever need to change the default root device, video mode, ramdisk size, etc. in the kernel image, use the 'rdev' program (or alternatively the LILO boot options when appropriate). No need to recompile the kernel to change these parameters. - Reboot with the new kernel and enjoy. IF SOMETHING GOES WRONG: - If you have problems that seem to be due to kernel bugs, please check the file MAINTAINERS to see if there is a particular person associated with the part of the kernel that you are having trouble with. If there isn't anyone listed there, then the second best thing is to mail them to me (torvalds@linux-foundation.org), and possibly to any other relevant mailing-list or to the newsgroup. - In all bug-reports, *please* tell what kernel you are talking about, how to duplicate the problem, and what your setup is (use your common sense). If the problem is new, tell me so, and if the problem is old, please try to tell me when you first noticed it. - If the bug results in a message like unable to handle kernel paging request at address C0000010 Oops: 0002 EIP: 0010:XXXXXXXX eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx ds: xxxx es: xxxx fs: xxxx gs: xxxx Pid: xx, process nr: xx xx xx xx xx xx xx xx xx xx xx or similar kernel debugging information on your screen or in your system log, please duplicate it *exactly*. The dump may look incomprehensible to you, but it does contain information that may help debugging the problem. The text above the dump is also important: it tells something about why the kernel dumped code (in the above example, it's due to a bad kernel pointer). More information on making sense of the dump is in Documentation/oops-tracing.txt - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump as is, otherwise you will have to use the "ksymoops" program to make sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). This utility can be downloaded from ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ . Alternatively, you can do the dump lookup by hand: - In debugging dumps like the above, it helps enormously if you can look up what the EIP value means. The hex value as such doesn't help me or anybody else very much: it will depend on your particular kernel setup. What you should do is take the hex value from the EIP line (ignore the "0010:"), and look it up in the kernel namelist to see which kernel function contains the offending address. To find out the kernel function name, you'll need to find the system binary associated with the kernel that exhibited the symptom. This is the file 'linux/vmlinux'. To extract the namelist and match it against the EIP from the kernel crash, do: nm vmlinux | sort | less This will give you a list of kernel addresses sorted in ascending order, from which it is simple to find the function that contains the offending address. Note that the address given by the kernel debugging messages will not necessarily match exactly with the function addresses (in fact, that is very unlikely), so you can't just 'grep' the list: the list will, however, give you the starting point of each kernel function, so by looking for the function that has a starting address lower than the one you are searching for but is followed by a function with a higher address you will find the one you want. In fact, it may be a good idea to include a bit of "context" in your problem report, giving a few lines around the interesting one. If you for some reason cannot do the above (you have a pre-compiled kernel image or similar), telling me as much about your setup as possible will help. Please read the REPORTING-BUGS document for details. - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you cannot change values or set break points.) To do this, first compile the kernel with -g; edit arch/i386/Makefile appropriately, then do a "make clean". You'll also need to enable CONFIG_PROC_FS (via "make config"). After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore". You can now use all the usual gdb commands. The command to look up the point where your system crashed is "l *0xXXXXXXXX". (Replace the XXXes with the EIP value.) gdb'ing a non-running kernel currently fails because gdb (wrongly) disregards the starting offset for which the kernel is compiled.
jmimu / Master Tile ConverterExtract and import tiles from Sega Master System (SMS) roms.
NoUDerp / TilerThe easiest 2 dimension XYZ tile maker for images - Now with pre-made (self-contained) executables for most operating systems. This simple program can quickly slice your large images into pre-scaled tiles to be used in a tile viewer like leaflet.
Markavian / Tile MergerA tile merger, for merging multiple images into a single image. Written in C# for the .NET framework for Windows operating systems.
nojhan / UbergeekismAn attempt at using as many as possible COOL computer science stuff to produce a single image (Lindenmayer system, Penrose tiling, Travelling Salesman Problem, Ant Colony Optimization, A*, etc.).
kbhujbal / GeoIntel Satellite Military Asset Classification CNN🛰️ SAHI-powered satellite reconnaissance system for detecting military vehicles in high-resolution imagery. Uses YOLOv8 with sliding window inference to detect small objects (tanks, trucks, AFVs) that standard detection misses due to aggressive image downscaling. Processes 4000x4000 images via 512x512 overlapping tiles.
redboyrave / Aseprite GB ExporterScript to export GBDK compatible tiles with Aseprite 1.3's tile system
ropensci / QuadkeyrAn R package designed to create raster images from QuadKey-identified data (Microsoft Bing Maps Tile System), aiming to simplify the analysis of Facebook mobility data.
thversfelt / AperiodicTilingA Unity surface shader that removes noticeable tiling patterns by implementing a state-of-art stochastic tiling system.
Nixy1234 / Dfdfd# All paths in this configuration file are relative to Dynmap's data-folder: minecraft_server/dynmap/ # All map templates are defined in the templates directory # To use the HDMap very-low-res (2 ppb) map templates as world defaults, set value to vlowres # The definitions of these templates are in normal-vlowres.txt, nether-vlowres.txt, and the_end-vlowres.txt # To use the HDMap low-res (4 ppb) map templates as world defaults, set value to lowres # The definitions of these templates are in normal-lowres.txt, nether-lowres.txt, and the_end-lowres.txt # To use the HDMap hi-res (16 ppb) map templates (these can take a VERY long time for initial fullrender), set value to hires # The definitions of these templates are in normal-hires.txt, nether-hires.txt, and the_end-hires.txt # To use the HDMap low-res (4 ppb) map templates, with support for boosting resolution selectively to hi-res (16 ppb), set value to low_boost_hi # The definitions of these templates are in normal-low_boost_hi.txt, nether-low_boost_hi.txt, and the_end-low_boost_hi.txt # To use the HDMap hi-res (16 ppb) map templates, with support for boosting resolution selectively to vhi-res (32 ppb), set value to hi_boost_vhi # The definitions of these templates are in normal-hi_boost_vhi.txt, nether-hi_boost_vhi.txt, and the_end-hi_boost_vhi.txt # To use the HDMap hi-res (16 ppb) map templates, with support for boosting resolution selectively to xhi-res (64 ppb), set value to hi_boost_xhi # The definitions of these templates are in normal-hi_boost_xhi.txt, nether-hi_boost_xhi.txt, and the_end-hi_boost_xhi.txt deftemplatesuffix: lowres # Map storage scheme: only uncommoent one 'type' value # filetree: classic and default scheme: tree of files, with all map data under the directory indicated by 'tilespath' setting # sqlite: single SQLite database file (this can get VERY BIG), located at 'dbfile' setting (default is file dynmap.db in data directory) # mysql: MySQL database, at hostname:port in database, accessed via userid with password # mariadb: MariaDB database, at hostname:port in database, accessed via userid with password # postgres: PostgreSQL database, at hostname:port in database, accessed via userid with password storage: # Filetree storage (standard tree of image files for maps) type: filetree # SQLite db for map storage (uses dbfile as storage location) #type: sqlite #dbfile: dynmap.db # MySQL DB for map storage (at 'hostname':'port' in database 'database' using user 'userid' password 'password' and table prefix 'prefix' #type: mysql #hostname: localhost #port: 3306 #database: dynmap #userid: dynmap #password: dynmap #prefix: "" components: - class: org.dynmap.ClientConfigurationComponent - class: org.dynmap.InternalClientUpdateComponent sendhealth: true sendposition: true allowwebchat: true webchat-interval: 5 hidewebchatip: false trustclientname: false includehiddenplayers: false # (optional) if true, color codes in player display names are used use-name-colors: false # (optional) if true, player login IDs will be used for web chat when their IPs match use-player-login-ip: true # (optional) if use-player-login-ip is true, setting this to true will cause chat messages not matching a known player IP to be ignored require-player-login-ip: false # (optional) block player login IDs that are banned from chatting block-banned-player-chat: true # Require login for web-to-server chat (requires login-enabled: true) webchat-requires-login: false # If set to true, users must have dynmap.webchat permission in order to chat webchat-permissions: false # Limit length of single chat messages chatlengthlimit: 256 # # Optional - make players hidden when they are inside/underground/in shadows (#=light level: 0=full shadow,15=sky) # hideifshadow: 4 # # Optional - make player hidden when they are under cover (#=sky light level,0=underground,15=open to sky) # hideifundercover: 14 # # (Optional) if true, players that are crouching/sneaking will be hidden hideifsneaking: false # If true, player positions/status is protected (login with ID with dynmap.playermarkers.seeall permission required for info other than self) protected-player-info: false # If true, hide players with invisibility potion effects active hide-if-invisiblity-potion: true # If true, player names are not shown on map, chat, list hidenames: false #- class: org.dynmap.JsonFileClientUpdateComponent # writeinterval: 1 # sendhealth: true # sendposition: true # allowwebchat: true # webchat-interval: 5 # hidewebchatip: false # includehiddenplayers: false # use-name-colors: false # use-player-login-ip: false # require-player-login-ip: false # block-banned-player-chat: true # hideifshadow: 0 # hideifundercover: 0 # hideifsneaking: false # # Require login for web-to-server chat (requires login-enabled: true) # webchat-requires-login: false # # If set to true, users must have dynmap.webchat permission in order to chat # webchat-permissions: false # # Limit length of single chat messages # chatlengthlimit: 256 # hide-if-invisiblity-potion: true # hidenames: false - class: org.dynmap.SimpleWebChatComponent allowchat: true # If true, web UI users can supply name for chat using 'playername' URL parameter. 'trustclientname' must also be set true. allowurlname: false # Note: this component is needed for the dmarker commands, and for the Marker API to be available to other plugins - class: org.dynmap.MarkersComponent type: markers showlabel: false enablesigns: false # Default marker set for sign markers default-sign-set: markers # (optional) add spawn point markers to standard marker layer showspawn: true spawnicon: world spawnlabel: "Spawn" # (optional) layer for showing offline player's positions (for 'maxofflinetime' minutes after logoff) showofflineplayers: false offlinelabel: "Offline" offlineicon: offlineuser offlinehidebydefault: true offlineminzoom: 0 maxofflinetime: 30 # (optional) layer for showing player's spawn beds showspawnbeds: false spawnbedlabel: "Spawn Beds" spawnbedicon: bed spawnbedhidebydefault: true spawnbedminzoom: 0 spawnbedformat: "%name%'s bed" # (optional) Show world border (vanilla 1.8+) showworldborder: true worldborderlabel: "Border" - class: org.dynmap.ClientComponent type: chat allowurlname: false - class: org.dynmap.ClientComponent type: chatballoon focuschatballoons: false - class: org.dynmap.ClientComponent type: chatbox showplayerfaces: true messagettl: 5 # Optional: set number of lines in scrollable message history: if set, messagettl is not used to age out messages #scrollback: 100 # Optional: set maximum number of lines visible for chatbox #visiblelines: 10 # Optional: send push button sendbutton: false - class: org.dynmap.ClientComponent type: playermarkers showplayerfaces: true showplayerhealth: true # If true, show player body too (only valid if showplayerfaces=true showplayerbody: false # Option to make player faces small - don't use with showplayerhealth smallplayerfaces: false # Optional - make player faces layer hidden by default hidebydefault: false # Optional - ordering priority in layer menu (low goes before high - default is 0) layerprio: 0 # Optional - label for player marker layer (default is 'Players') label: "Players" #- class: org.dynmap.ClientComponent # type: digitalclock - class: org.dynmap.ClientComponent type: link - class: org.dynmap.ClientComponent type: timeofdayclock showdigitalclock: true #showweather: true # Mouse pointer world coordinate display - class: org.dynmap.ClientComponent type: coord label: "Location" hidey: false show-mcr: false show-chunk: false # Note: more than one logo component can be defined #- class: org.dynmap.ClientComponent # type: logo # text: "Dynmap" # #logourl: "images/block_surface.png" # linkurl: "http://forums.bukkit.org/threads/dynmap.489/" # # Valid positions: top-left, top-right, bottom-left, bottom-right # position: bottom-right #- class: org.dynmap.ClientComponent # type: inactive # timeout: 1800 # in seconds (1800 seconds = 30 minutes) # redirecturl: inactive.html # #showmessage: 'You were inactive for too long.' #- class: org.dynmap.TestComponent # stuff: "This is some configuration-value" # Treat hiddenplayers.txt as a whitelist for players to be shown on the map? (Default false) display-whitelist: false # How often a tile gets rendered (in seconds). renderinterval: 1 # How many tiles on update queue before accelerate render interval renderacceleratethreshold: 60 # How often to render tiles when backlog is above renderacceleratethreshold renderaccelerateinterval: 0.2 # How many update tiles to work on at once (if not defined, default is 1/2 the number of cores) tiles-rendered-at-once: 2 # If true, use normal priority threads for rendering (versus low priority) - this can keep rendering # from starving on busy Windows boxes (Linux JVMs pretty much ignore thread priority), but may result # in more competition for CPU resources with other processes usenormalthreadpriority: true # Save and restore pending tile renders - prevents their loss on server shutdown or /reload saverestorepending: true # Save period for pending jobs (in seconds): periodic saving for crash recovery of jobs save-pending-period: 900 # Zoom-out tile update period - how often to scan for and process tile updates into zoom-out tiles (in seconds) zoomoutperiod: 30 # Control whether zoom out tiles are validated on startup (can be needed if zoomout processing is interrupted, but can be expensive on large maps) initial-zoomout-validate: true # Default delay on processing of updated tiles, in seconds. This can reduce potentially expensive re-rendering # of frequently updated tiles (such as due to machines, pistons, quarries or other automation). Values can # also be set on individual worlds and individual maps. tileupdatedelay: 30 # Tile hashing is used to minimize tile file updates when no changes have occurred - set to false to disable enabletilehash: true # Optional - hide ores: render as normal stone (so that they aren't revealed by maps) #hideores: true # Optional - enabled BetterGrass style rendering of grass and snow block sides #better-grass: true # Optional - enable smooth lighting by default on all maps supporting it (can be set per map as lighting option) smooth-lighting: true # Optional - use world provider lighting table (good for custom worlds with custom lighting curves, like nether) # false=classic Dynmap lighting curve use-brightness-table: true # Optional - render specific block names using the textures and models of another block name: can be used to hide/disguise specific # blocks (e.g. make ores look like stone, hide chests) or to provide simple support for rendering unsupported custom blocks block-alias: # "minecraft:quartz_ore": "stone" # "diamond_ore": "coal_ore" # Default image format for HDMaps (png, jpg, jpg-q75, jpg-q80, jpg-q85, jpg-q90, jpg-q95, jpg-q100, webp, webp-q75, webp-q80, webp-q85, webp-q90, webp-q95, webp-q100), # Note: any webp format requires the presence of the 'webp command line tools' (cwebp, dwebp) (https://developers.google.com/speed/webp/download) # # Has no effect on maps with explicit format settings image-format: jpg-q90 # If cwebp or dwebp are not on the PATH, use these settings to provide their full path. Do not use these settings if the tools are on the PATH # For Windows, include .exe # #cwebpPath: /usr/bin/cwebp #dwebpPath: /usr/bin/dwebp # use-generated-textures: if true, use generated textures (same as client); false is static water/lava textures # correct-water-lighting: if true, use corrected water lighting (same as client); false is legacy water (darker) # transparent-leaves: if true, leaves are transparent (lighting-wise): false is needed for some Spout versions that break lighting on leaf blocks use-generated-textures: true correct-water-lighting: true transparent-leaves: true # ctm-support: if true, Connected Texture Mod (CTM) in texture packs is enabled (default) ctm-support: true # custom-colors-support: if true, Custom Colors in texture packs is enabled (default) custom-colors-support: true # Control loading of player faces (if set to false, skins are never fetched) #fetchskins: false # Control updating of player faces, once loaded (if faces are being managed by other apps or manually) #refreshskins: false # Customize URL used for fetching player skins (%player% is macro for name) skin-url: "http://skins.minecraft.net/MinecraftSkins/%player%.png" # Control behavior for new (1.0+) compass orientation (sunrise moved 90 degrees: east is now what used to be south) # default is 'newrose' (preserve pre-1.0 maps, rotate rose) # 'newnorth' is used to rotate maps and rose (requires fullrender of any HDMap map - same as 'newrose' for FlatMap or KzedMap) compass-mode: newnorth # Triggers for automatic updates : blockupdate-with-id is debug for breaking down updates by ID:meta # To disable, set just 'none' and comment/delete the rest render-triggers: - blockupdate #- blockupdate-with-id #- lightingupdate - chunkpopulate - chunkgenerate #- none # Title for the web page - if not specified, defaults to the server's name (unless it is the default of 'Unknown Server') #webpage-title: "My Awesome Server Map" # The path where the tile-files are placed. tilespath: web/tiles # The path where the web-files are located. webpath: web # The path were the /dynmapexp command exports OBJ ZIP files exportpath: export # The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access). # If not set, uses same setting as server in server.properties (or 0.0.0.0 if not specified) #webserver-bindaddress: 0.0.0.0 # The TCP-port the webserver will listen on. webserver-port: 8123 # Maximum concurrent session on internal web server - limits resources used in Bukkit server max-sessions: 30 # Disables Webserver portion of Dynmap (Advanced users only) disable-webserver: false # Enable/disable having the web server allow symbolic links (true=compatible with existing code, false=more secure (default)) allow-symlinks: true # Enable login support login-enabled: false # Require login to access website (requires login-enabled: true) login-required: false # Period between tile renders for fullrender, in seconds (non-zero to pace fullrenders, lessen CPU load) timesliceinterval: 0.0 # Maximum chunk loads per server tick (1/20th of a second) - reducing this below 90 will impact render performance, but also will reduce server thread load maxchunkspertick: 200 # Progress report interval for fullrender/radiusrender, in tiles. Must be 100 or greater progressloginterval: 100 # Parallel fullrender: if defined, number of concurrent threads used for fullrender or radiusrender # Note: setting this will result in much more intensive CPU use, some additional memory use. Caution should be used when # setting this to equal or exceed the number of physical cores on the system. #parallelrendercnt: 4 # Interval the browser should poll for updates. updaterate: 2000 # If nonzero, server will pause fullrender/radiusrender processing when 'fullrenderplayerlimit' or more users are logged in fullrenderplayerlimit: 0 # If nonzero, server will pause update render processing when 'updateplayerlimit' or more users are logged in updateplayerlimit: 0 # Target limit on server thread use - msec per tick per-tick-time-limit: 50 # If TPS of server is below this setting, update renders processing is paused update-min-tps: 18.0 # If TPS of server is below this setting, full/radius renders processing is paused fullrender-min-tps: 18.0 # If TPS of server is below this setting, zoom out processing is paused zoomout-min-tps: 18.0 showplayerfacesinmenu: true # Control whether players that are hidden or not on current map are grayed out (true=yes) grayplayerswhenhidden: true # Set sidebaropened: 'true' to pin menu sidebar opened permanently, 'pinned' to default the sidebar to pinned, but allow it to unpin #sidebaropened: true # Customized HTTP response headers - add 'id: value' pairs to all HTTP response headers (internal web server only) #http-response-headers: # Access-Control-Allow-Origin: "my-domain.com" # X-Custom-Header-Of-Mine: "MyHeaderValue" # Trusted proxies for web server - which proxy addresses are trusted to supply valid X-Forwarded-For fields trusted-proxies: - "127.0.0.1" - "0:0:0:0:0:0:0:1" joinmessage: "%playername% joined" quitmessage: "%playername% quit" spammessage: "You may only chat once every %interval% seconds." # format for messages from web: %playername% substitutes sender ID (typically IP), %message% includes text webmsgformat: "&color;2[WEB] %playername%: &color;f%message%" # Control whether layer control is presented on the UI (default is true) showlayercontrol: true # Enable checking for banned IPs via banned-ips.txt (internal web server only) check-banned-ips: true # Default selection when map page is loaded defaultzoom: 0 defaultworld: world defaultmap: flat # (optional) Zoom level and map to switch to when following a player, if possible #followzoom: 3 #followmap: surface # If true, make persistent record of IP addresses used by player logins, to support web IP to player matching persist-ids-by-ip: true # If true, map text to cyrillic cyrillic-support: false # Messages to customize msg: maptypes: "Map Types" players: "Players" chatrequireslogin: "Chat Requires Login" chatnotallowed: "You are not permitted to send chat messages" hiddennamejoin: "Player joined" hiddennamequit: "Player quit" # URL for client configuration (only need to be tailored for proxies or other non-standard configurations) url: # configuration URL #configuration: "up/configuration" # update URL #update: "up/world/{world}/{timestamp}" # sendmessage URL #sendmessage: "up/sendmessage" # login URL #login: "up/login" # register URL #register: "up/register" # tiles base URL #tiles: "tiles/" # markers base URL #markers: "tiles/" # Snapshot cache size, in chunks snapshotcachesize: 500 # Snapshot cache uses soft references (true), else weak references (false) soft-ref-cache: true # Player enter/exit title messages for map markers # # Processing period - how often to check player positions vs markers - default is 1000ms (1 second) #enterexitperiod: 1000 # Title message fade in time, in ticks (0.05 second intervals) - default is 10 (1/2 second) #titleFadeIn: 10 # Title message stay time, in ticks (0.05 second intervals) - default is 70 (3.5 seconds) #titleStay: 70 # Title message fade out time, in ticks (0.05 seocnd intervals) - default is 20 (1 second) #titleFadeOut: 20 # Enter/exit messages use on screen titles (true - default), if false chat messages are sent instead #enterexitUseTitle: true # Set true if new enter messages should supercede pending exit messages (vs being queued in order), default false #enterReplacesExits: true # Set to true to enable verbose startup messages - can help with debugging map configuration problems # Set to false for a much quieter startup log verbose: false # Enables debugging. #debuggers: # - class: org.dynmap.debug.LogDebugger # Debug: dump blocks missing render data dump-missing-blocks: false
InfernoInfernal / Tactics A TemplateA template for isometric movement and direction facing in 2.5d TRPGs using Unity's tile palette system
shellixyz / Hd Fpv Osd Font ToolA tool for managing OSD fonts or tile collections for HD FPV systems (Walksnail Avatar, HDZero, DJI FPV system)
repulobalna / Chunk ManagerChunkManager for Godot: A dynamic chunk management system for 2D games in Godot, enabling efficient loading and unloading of tile chunks based on player position. Utilizes noise generation for varied terrain types, including water, sand, and grass, optimizing performance for large game worlds.
jbobrow / AutomaTilesAutomaTiles presents a new way to interact with cellular automata. In a physical form, each tile can be manipulated, and progresses based on an external metronome or user input. The same intimate knowledge a movie editor has with a film is shared with computation, as the user can control the speed at which the system evolves and handle individuals as they respond to input.
AaronEdge / TilePathfindingPath finder for unitys tile system
pato / PatOSPatOS - Simple Multi-Process x86 Operating System with full keyboard support, VGA driver, FAT support, and a Dynamic Tiling Window Manager
NicDoesCode / SMSGFXA browser based graphics, tile and palette editor for building games for retro systems.
